Move The Content Of Cell From One Column To Other

Aug 21, 2007

I want to enter a number 0 to 999 in cell A1 and when the enter key is pressed move the contents of cell A1 to A2 and A2 to A3, cascading down until A40. So after five numbers the first number I entered woul now have cascaded down to cell A5 ready to go into cell A6.

Would I have to use some kind of program or does excel have a command for this?

View 11 Replies


ADVERTISEMENT

Move Cell Content And Delete Source?

Sep 19, 2012

i have code like this to copy certain word in cell and place it at new sheet:

VB:
Sub Foo()Dim i As Long, iMatches As Long
Dim aTokens() As String: aTokens = Split("Accommodation", ",")
For Each cell In Sheets("Sheet1").Range("C:C")

[Code].....

the problem is the cell source is not deleted. what line should i change in code above to move the result to new sheet and delete row source

View 7 Replies View Related

Matrix - Identify Cell Content In Column For Row If Matrix Content True?

Mar 21, 2014

For a table like the one below produced for the sake of example (actual is much much bigger) I want to make it list rows that are true for a certain column for a certain variable in the matrix. So for say water terrain, which types of activity can I do i.e. swimming. Or for Offroad the activites which I can't do i.e. Run and Swim.

ActivityWaterRoadOffroad
Jog nym
Run nyn
Walk nyy
Swim ynn
y=yes
n=no
m=maybe

View 10 Replies View Related

Cell Content > 255 Then Move "excess" To Row Below

Oct 1, 2009

I'm looking to combine a number of worksheets into a summary sheet .. but on some the narrative is more than the 255 characters. How can I , where this is the case, insert a row below.. say input "Continued" in column A and then copy the contents of the cell which is more than 255 to the cell immediately below it.. and maybe do this again where users input more than 510 characters.


Alternatively, is there a way of getting around the copy and paste values.. where it only inputs 255 ?

View 9 Replies View Related

How To Move Row Content With Uneven Spacing

May 13, 2013

I have a spreadsheet which contains 6000 rows where column A1 lists a name, B1 an address, C1 an amount and B2 the 4-digit zip code and place. Now I want to move the content of B2 to D1. I can't use offset because the spacing of the zipcode cell is not always the same.

View 4 Replies View Related

Move Rows Based On Content Of 2 Cells

Oct 24, 2006

At the moment I have 1 spreadsheet with 12 worksheets that I have to enter data into. I would rather enter all the data onto one sheet then have a macro move the data into the correct worksheet based on the contents of columns A and B.

The raw data will be entered into the worksheet "Data". Once complete, I would like the user to press a button and the macro to then identify from column A the suppliers name. If it is not one of the recognised suppliers, then it would move the row into the worksheet "one off". If it does recognise the supplier then it checks column B to see which of the two supplier's two worksheets it needs to copy it to, with the data entered into the correct column based on the column title (ie only the white columns).

View 9 Replies View Related

Does Cell Content Exist In Column

May 18, 2007

I do have a problem with my excel sheet. i have a workbook with 2 sheet which i need to compare a colume of data from sheet1 with sheet 2 colume M2. If it is matched, then sheet 2 colume BJ2 will return a "F" else "N"
So i was thinking of using an If formulae: =IF(M2=sheet1!A2:A16),"F","N") but somehow the above text return a msg of "A16" is invalid. and i tried to used VLOOKUP by defining the mapping sheet as "KEY"

=VLOOKUP(M2,KEY,A2)

and i copy and paste the above formulae to the remaining column M for comparison. Somehow, this did not work as well.

View 4 Replies View Related

How To Lookup Row # Based On Content Of Another Column's Cell

Oct 24, 2005

I have a 3 column table with 20 rows. The first two columns contain travel
expense data. The cells in the third column are blank exept for whichever
cell I enter an "x" in. Please let me what formula or worksheet function do
I use to calculate the travel expenses based on the data in the first two
columns that correspond to the row of the cell with an "x" in the third
column?

View 9 Replies View Related

Match Cell Content With Another File And Return Value From Next Column Over?

Sep 29, 2013

I have two files. They both have US census tract numbers in a column GEOID2010. One also has a CSA2010 text description associated with each census tract.

I need to match the cell with a census tract in the first file (example1).xlsx with the census tracts in the second file (example2.xlsx), and then return the CSA2010 text from the next column over to the first file.

I've attached two example files.

View 4 Replies View Related

Read Cell Content & ADD Content + Font Properties *SOLVE

Sep 12, 2007

I use this to read cell content, add some text/characters (ie. [ and ]) and change the properties of the complete cell

Sub COMMENT()
Worksheets("DVD Lijssie").Activate
If ActiveCell.Value 0 Then ' Change all in to ... ... ...
ActiveCell.FormulaR1C1 = ActiveCell.Value & " " & "]" & " " & "["
With ActiveCell.Font
.Name = "Arial Narrow"
.Size = 8
.ColorIndex = 16
End With
End If
End Sub
HOW can I change this vba-code so it leave's the content of the cell like it is and add some content with the use of let's say TexBox1 and ONLY use different font properties for the newely added content?

View 9 Replies View Related

Concatenate All The Cell Content From A Column In One Cell

Feb 27, 2007

I would need to concatenate all the cell'content from a column if the value is different from null ("") in just one cell separated by ";" ... By ex :
In column A I have :
A1-""
A2-X
A3-""
A4-y
In cell B1 I should get "X;Y"

View 9 Replies View Related

Change Content Of One Cell Based On Content Of Another

Apr 18, 2014

Formula/macro/etc that would enable me to have content of a cell changed based on the content of another cell in the same row.

Example: cell in column D says "PSA" - so I would need the cell in column H for that same row to read "Radio"

I would need an entire sheet scanned to review for these occurrences and make the appropriate changes. I also would need the formula to be inclusive enough to scan for variations in column D cell content (PSA 1, PSA 2, etc).

View 4 Replies View Related

Move Down Column And For Every Blank Cell Clear Contents Of Cell To The Left?

Jun 1, 2014

i need a code that moves down a column and for every empty cell in the column the cell to the left is cleared and then it moves on to the next cell down. the column is not always the same and will start from a selected cell, and the column will contain no more than 5 rows

View 3 Replies View Related

Highlight Row And Column On Move Down Of Cell

Jun 18, 2009

As I move down a cell, I would like the entire row and column be highlighted. Is that possible?

View 11 Replies View Related

Move Duplicated Cell Into New Column

Mar 14, 2014

Basically I have an export which I need to manipulate so I can do a mail merge. I've managed to find a solution to remove the data I don't need and also managed to create the mail merge (even fixing the weird American date issue)

The data that is left looks a bit like this

Staff ID
Name
week ending
week ending
1
Bob Smith
02/03/14

[Code]...

basically what i need the macro to do is to see theres two Bob Smiths (or 2 Staff Id's "1") and put the second instance in column 4

e.g.

Staff ID
Name
week ending
week ending
1
Bob Smith
02/03/14
09/03/14

[Code]...

in some instances there could be 20+ week ending dates to go into the row.

also I don't need to have the dates all in seperate boxes, I just need the information in a row so the mail merge reads and sends out one message rather than 20 messages to the same person asking for each week by itself.

I've manually moved the dates into the boxes up to now and everything else is working

View 5 Replies View Related

Move To First Non-blank Cell In Column

Feb 8, 2009

I will be moving to a specific cell - "N1". I'm looking for code that will then scan down from that cell, making the first blank cell the active one.

View 4 Replies View Related

Move Every Other Cell In A Column To Row Above It Then Delete Previous Row

Jul 11, 2014

I have a spreadsheet that I need to rearrange to improve readability. I have an example attache, which is easier to understand than describing it, but I'll try:

I want to start in a1, move to a2
copy a2 to b1
delete line 2 (the previous lrow 3 now becomes row 2
if a2 > 0.01, skip it and
move & select cell a3
... and repeat the above logic, on the next series of cells...

E.g.
copy a3 to b2
delete line 3 (the previous lrow 4 now becomes row 3
if a3 > 0.01, skip it and
move & select cell a4
...and repeat the sequence again.

View 2 Replies View Related

Macro - Move To Next Empty Cell In A Column

Sep 30, 2010

In columnA I want to jump to the next blank cell in a list that continues to grow. So the first time I run the macro I want to go (blank) cell A5 to paste in some data. The next time I run it, it would need to go to cell A6 and so on.

When I do this manually, I simply hit ctrl down-arrow (takes me to the last cell w/data) and then one more down-arrow to take me to the empty cell below.

When I do this in the macro it seems to remeber the cell as an absolute reference (if that's the term) and so it just copies info in the same location as previous, instead of the next empty cell.

View 5 Replies View Related

Move Final Word In Cell To Next Column?

Jul 2, 2014

So I have a few hundred spreadsheets with the following structure:

Persson L. S skogsarb Granberg Malung
Persson M R fru
Persson N skogv Sjog 23 Torsby

What I want to do is move/split the ultimate word in every cell in column A to a parallel cell in column B, and then delete the word from column A.

View 9 Replies View Related

Move Cell One Column Right Offset Rows

Nov 4, 2006

I have sheet1 with four columns. Team, Issue, Discussion and Recommendation. Discussion and Recommendation headings were placed in column B along with the data in the file I was sent. I need to get it back into table format to eventually load into Access. What I'm trying to do is to loop reading down column B. When I find the word “Discussion” (exact format) I need to drop down one row below the word, cut whatever is in the row, move one column to the right, Column C, and two rows up and paste. For example, cell B3 has “Discussion”. I need to drop to B4, cut whatever is in the cell and move to C2 and paste. I also need the same to happen for Recommendation. Find the word, drop down one row, cut whatever is in the cell, move two columns to the right and up four rows. I would like to delete the rows I moved data from, but will do that by hand if it’s too hard to do in a macro.

An example of my data:
TeamText
Design4. Reuse existing code to extent possible.
DesignDiscussion
DesignNo discussion
DesignRecommendation
DesignEstablish a baseline and work to the plan.
Design5. Delete old code
DesignDiscussion
DesignNo discussion
DesignRecommendation
DesignNo recommendation
Design6. Plan to work without full details.
DesignDiscussion
DesignIncremental design
DesignRecommendation
DesignWork on smaller details first

Sub Discussion()..................

View 3 Replies View Related

Move Adjacent Cell Into Rows, Same Column

Aug 9, 2007

I need to create a repeatable macro/module to help me prepare a spreadsheet for import into Microsoft Access. In each row of the spreadsheet is various information including Order Number, Model, and Serial Number. The problem lies in the Serial Number column, which often contains several Serial Numbers delimited by commas. In order to serve my needs in Access, each Serial Number instance needs to become a new row ( record) wherein all of the information (except for the Serial Number) is the same. It is crucially important that all of the serial numbers are in the same column. (I tried using text to columns as a starting-off point, but seemed to dead end).

Example:

Order#1; Model1; Serial1, Serial2, Serial3

Needs to become:

Order#1; Model1; Serial1
Order#1; Model1; Serial2
Order#1; Model1; Serial3

View 9 Replies View Related

Convert Values / Content In One Particular Column To Individual Column Heading?

Jan 29, 2014

The yellow highlighted column F (each Reason) in the sheet2 to be placed as main header in the next column and so on as seen in the sheet 3

If they have two similar item number with 2 different reasons - delete the duplicate item number and place the number in each column according to its reason as seen on row 16 on the sheet3

If they have two number with similar reason - just sum up the number

sample excel 2.xlsx

View 1 Replies View Related

Convert Column B As Multiple Column Titles And Move Data In Column C Into New Columns?

Jun 30, 2014

I have a excelsheet that looks like this:

Column A | Column B | Column C
Los Angeles | Fire Dept | 3
Los Angeles | Health Services | 12
New York | Fire Dept | 8
New York | Health Services | 22
New York | Internal Services | 100
New York | Public Works | 7
Chicago | Health Services | 15
Chicago | Public Works | 56
Chicago | Social Services | 4

And I am trying to make it look like this:

Fire Dept
Health Services
Internal Services
Public Works
Social Services

Los Angeles
3
12

New York
8
22
100
7

Chicago

15

56
4

View 8 Replies View Related

Set Of Column Data Move To Different Column And Delete Unwanted Column VBA

May 29, 2014

I have set of data Pasted in 4th row, in the top row 44 columns values assigned i want move data from set of data to different column among these 44 columns

Like "Service Order ID" is 1 column in set of data ,it move to second column of top row

Some of column need to delete. (Service Order Type,Service Order Description,Created By,Status,Contact,Expected Delivery Date,

Creation Date,Priority,Net Value,Currency,External Reference,Reference Date)

I want Get output result in same sheet (Actual).

View 3 Replies View Related

Sum One Column Based On Another Content

Jun 9, 2014

Sum A1:A100 only for corresponding B1:B100 containing "paid". translate that to a formula? I don't know conceptually how to approach it.

View 1 Replies View Related

How To Take Part Of The Content From One Column And Put In Next Column

May 16, 2014

I have 5000 urls in one column and I want to take some part of the content from the urls and wanted put in next column in their respective cell.

how I wanted the data in the next column.

View 11 Replies View Related

Content From Entire Column In Other Column

Feb 10, 2012

I need to do the following:

I have a list of cities on one sheet. The headers are the counties and below each (6 columns) are all the cities names.

I need to be able to show all the cities of a specific column on a nother sheet (autofilling column down with all cities names) when i type the name of the related county in an adjacent cell.

View 2 Replies View Related

VBA / Word Picture Content Control Causing Unreadable Content?

Jan 15, 2013

I am using VBA to create a word document (.docx). This word document contains plain text content controls as well as picture content controls. I then use VBA to automatically select a picture based on the code below

Code:
Set oCC = Word.ActiveDocument.SelectContentControlsByTitle("TabPic").Item(1)
On Error GoTo TabErrorHandler
oCC.Range.InlineShapes.AddPicture Filename:="X:XFERANDREW-TDCD " & LblVL &

[Code].....

After the document has been closed down I try to open it again and I am told "The file cannot be opened because there are problems with the contents."

When I click details it says "Unspecified error" and "Location: Part: /word/document.xml, Line: 2, Column: 0"

If I click ok it says "Word found unreadable content in "". Do you want to recover the contents of this document? If you turst the source of this document, click Yes.

Clicking Yes opens the document with all the contents and it is now renamed to Document 1. If I click no it does not open.

View 9 Replies View Related

Deleting Partial Content In A Column

Mar 9, 2009

I have a sheet with 3 columns, A B and C

column B has content such as:

term 1 (c: text a)
term 2
term 3
term 4 (c: text b)
etc.

desired output:

term 1
term 2
term 3
term 4
etc.

Can someone create a macro for me to delete the (c: ...) in Column B but leaves all of the other column data alone.

View 9 Replies View Related

DELETE Row Based On Content Of Column

Jan 8, 2008

Need macro or other code that will examine a column in my my table for particular text (example: find text: "Total") and then DELETE the whole row that the cell containing the text is in.

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved