I'm looking for a macro to move all files from one folder to another. I won't know what the files are called and don't really need to know. They could and will be different every time. The purpose is to clear out the files created in the past fortnight ready for the next batch job to run.
View 2 Replies
I am developing a macro where I need to open a file, copy a value from a cell in that file and paste it in a cell of the original file. I need to do this several times from the same two files. My problem is that I don't have a command that moves back to the newly opened file to copy another value and paste it, again, in a cell of the original file. I can't use a specific file name to move to the newly opened file because the new file name changes every day. Here is the command that I use to open a new file:
Dim fn As Variant
fn = Application. GetOpenFilename("Excel-files,*.xls", _
1, "Select The Previous Day's Borrowing File To Open", , False)
If TypeName(fn) = "Boolean" Then Exit Sub
' the user didn't select a file
Debug.Print "Selected file: " & fn
Workbooks.Open fn
I need to move back to file fn several times, but, as I stated above, the file fn changes every day.
Shortcuts for moving tabs to different files. A copy of the tab, I mean.
View 1 Replies View RelatedI need to move all the "Excel" files which are available in Folder and also the Subfolders from this location.
I need all the Excel files.
I found a code which is able to move only from Folder but not from the Subfolder.
HTML Code:
Sub Move_Certain_Files_To_New_Folder()
'This example move all Excel files from FromPath to ToPath.
'Note: It will create the folder ToPath for you with a date-time stamp
Dim FSO As Object
Dim FromPath As String
Dim ToPath As String
Dim FileExt As String
Dim FNames As String
[code].....
I have an excel work book with 6 tabs. I would like to have Excel move an entire row from one tab to another tab (removing the row and inserting it in the other tab). I.e. Example I have a tab with items that are marked as "Open Actions" so if I were to change the drop down to close. Excel would move that entire row of actions to the tab with the "closed actions" and insert into the next available row. Now if someone were to come back at a later date say no it should be reopened than I would change the drop down to open and excel would move that row back to the open actions tab into next available row. I tried a PIVOT table and no good I played with few macro and not.
View 5 Replies View RelatedTrying to write a script to carry out a number of tasks but is there code to enable an Excel to look in a particular file for the list of csv files - carry out the tasks and return the appropriate values in the Excel sheet whilst leaving the original csv files untouched?
View 2 Replies View RelatedNeed a way to update a single master file. What happens right now is that the cost manager sends out one file to a lot of different project heads and then on having them return back to him he basically has to individually add in all the data. What i am trying to do is that he somehow carries on sending out the data as there are a lottt of projects and then on returning them they automatically update.
how I can loop through folders to select files starting with a certain word and copy all of them to a different folder and rename them. The folder structure is given below
Company 1(parent folder)
North South East(sub folder) West(sub folder)
Jan Feb Mar.... Dec Jan Feb Mar.... Dec Jan Feb Mar.... Dec Jan Feb Mar.... Dec
In the above structure, the files are present inside each folders Jan, feb...Dec under the regions North, South East n west. note that I have to select files starting with "Sales" and copy them into a new folder(say results) and rename copied files as Sales1.xls, Sales2.xls etc. (Files are not present in the folder company1, north, south, east and east.)
I want to allow users to place files (.jpg, .tif, .pdf, .pps etc) into a network folder and then have my program open each file and display it for 30 seconds then close the file and the application before opening the next file.
1. Set up a loop to get a directory listing of the folder and write the listing to a text file.
2. Open up the text file and get the next filename in it
3. Open the file in the associated application
4. Wait for 30 seconds (or some period of time) and then close the file
5. Repeat steps 2-4
DoIt = 1
While DoIt = 1
Open "C:TempList.txt" for output as #1
Print #1, Files In Folder
Close #1
Open "C:TempList.txt" for input as #2
while not eof(2)
Line input #2, MyFile
Display MyFile on screen
Wait for 30 seconds
Close MyFile and MyApplication that opened it
wend
Close #2
I can get the directory listing just fine with no problems
I can open the files in the associated application just fine with no problems.
with closing the application after 30 seconds or some period of time.
I need some code that will allow me to easily send it a filename and it will know how to close the file and the application that opened it.
I have an Excel application (Excel 2003) which is stored in the default Program Files folder by the Installer; for example: c:program fileszxchello.xls. The problem I am running into is this file opens as Read Only in Vista and this is interfering with the running of the application. There is no problem opening the file normally in Windows XP.
I have been able to narrow down the cause of this to the User Account Control system in Vista - if I turn OFF User Account Control, the Excel file opens normally and my application functions normally. Is there another option to open the Excel file without turning OFF User Account Control because some users may find it unacceptable to turn OFF this security feature. Ofcourse, one option is to install the application in another location, outside the Program Folder, and the file would open normally, but the Packaging Wizard that I am using to package the application does not allow me to install the application in any other location and thus, the application installs in the Program Folder and I am running into this problem of the Exel file opening as Read Only. Is there a way out of this situation where I can open the file normally (not as Read Only)?
I'm using the following code to import thousands of html files into my spreadsheet. The code is working fine. Since I am importing thousands of files, when there is no more space on my worksheet, the code stops with an error message. I want to make this code add another worksheet & continue importing the html files until there are no more files to import.
Sub Master_Importer()
Dim I As Long
Dim strFilename As String
Dim strPath As String
strPath = "file:///C:/Documents and Settings/c/Desktop/New Folder/"
With Application.FileSearch
.LookIn = "C:Documents and SettingscDesktopNew Folder"
.FileType = msoFileTypeAllFiles
.Execute
For I = 1 To .FoundFiles.Count
strFilename = Mid(.FoundFiles(I), InStrRev(.FoundFiles(I), "") + 1)
With ActiveSheet.QueryTables.Add(Connection:= _
"URL;" & strPath & strFilename _ .......................
I have a excel file that I enter information into. I have code that saves the files to a certain folder with the name, date, and time stamp for the file name. At the end of the day I might have 3 to 15 excel files I have created that day and I would like to take information from certain cells (examle: L3, B6, B7, B8, G8, and so on) and create a txt file with all of the information in it.
Example:
12/20/2007
Your Name
123 Somewhere St.
Here, OH 45111
Home Visit
12/20/2007
Someone Else
345 Anywhere St.
There, OH 45211
Hospital Visit
I is it possible to convert all comma separated text files in a single folder in to excel files. But the requirement is to have 2 sheets in each new file. first to be the full file - with all columns, and in the second sheet to keep only colum A B D G H K L M O P R S T V W from the first sheet. The second sheet name must be the same as the first one but without the first "wlist_" in the name.
One more thing. The third column in the second is called "COUL". there are short letters for colors in french
can they be converted with the sort in English like it goes:
NO = B
BA = W
RG = R
SO = P
JA = Y
BE = L
VE = GY
GR = G
VI = V
MA = BR
BJ = TA
OR = O
Here is a link to the both CSV and an example excel file with the end result. In this example i haven`t change the shorts for the colors. It takes me too much time with the find and replace function. And at the moment i`m really pushed from time.
[URL]
I have 50 files each with 1000 numbers in column A.
I need to compare every list with every other list and calculate the Pearson function.
I am ok with the vb code to compare every file with everyother.
I can do this by opening each file then closing but it takes too long.
Each of the 50 csv file names is in my destination workbook
I would like to define an array using the file name, then extract 2 lists without opening the files then perform the pearson function and place the value in the destination workbook. (The pearson function just measures the strength of correlation between 2 sets of numbers)
I have a large number of .txt files that are comma separated files (but not saved with the .csv extension) that I need to convert to files with the .csv extension.
Is there an easy way to do this for all files in a given folder? Ideally, the files don't even need to be opened as they are are quite large in size (70MB+) and there are a lot of them (500+).
I have about 100 Excel files in one folder that need to be saved as text files. They can keep the same name, but simply need to be converted to text files. I'd like to use VBA for this and I can't find examples that do exactly that...or ones that my limited knowledge can handle.
Excel files exist in C:Source and ALL of them should be saved as text files in C:Destination. Maybe there is an easier way, but I thought for sure there was a routine I could use.
I have 22 CSV files. I want to search each of those files for a specific text string (ie: "profile" or "description"). When the macro finds the word in any one of the CSV files I want it to copy that complete csv worksheet and paste it into an excel xls file.
how I can go about doing this. Not also that while vlookup is possible, its very time consuming if i have to do this 50 times over and each time the csv files have different file names. that is why i want to search within a file (each file has its own unique identifying text string)
I have the code below. It openes all csv files within a folder, then delete rows depending on the value of a cell. Now it needs to save the file as a xls file ....
View 9 Replies View RelatedI would like to be able to execute a command line that will convert an Excel csv file to an Excel file that is TAB delimited. In other words, replace the comma delimiter with a TAB delimiter without having to open the file in Excel. I am an inexperienced Excel user
View 2 Replies View RelatedIs there a code that will search a pre-determined folder for all .xls files containing the word "Temp", and deleting those files?
Example:
In the root of drive M, I have several Excel files. Anytime one of the original tracking logs is opened, a temp file of that log is automatically created. I would like to automatically search the drive and delete all files containin the word "Temp".
I've attached a picture of the directory tree, in case that will help. The file will always be named "PO Response Tracking - Temp#######.xls", with ###### representing a series of either 5 or 6 numbers.
Let's say there's a couple row:
[Code].....
Here's a column I will be pasting:
[Code] ....
If I want to "Insert Copied Cells" in place of Yellow on Row1 and shift the cells down, the rows would look like this:
[Code] .....
How can I make it so the rows would be the following during such a paste:
[Code] .....
This is because I have hundreds of cells that I need to insert as columns all the while pushing complete rows down. If you're trying to understand why, it will be for some online marketing purpose as demonstrated here in this sheet: [URL] ...
I am unaware how to set up a combo box to allow users to move from the combobox to the next combo box . tab or enter? The way we do it know is we click with the mouse from combobox.
View 3 Replies View RelatedI have a workbook with 2 work sheets, when a row has "yes" typed into the "accepted bid" column I would like that row to be placed into the second sheet in the order in which it was entered "yes"
so, if on the first sheet a row, lets say row 10 had "yes" typed into it but row 10-15 on the second sheet had something in it already, the info would have to be placed in the next available row.
I have approximatley 20 rows on the first sheet and the ones that transfer to the second can just be added to it as needed.
I want to move the vales from F8 to F9, F9 to F10, F10 to F12 (there is a space)and so one. I would like it to be triggered by changing the value in F8 if possible. I have tried a good few ways, sometimes I get a stack 28 error.Zones.xlsm
View 6 Replies View RelatedIs there a way to write VBA code that can reference a range of data that may be moved on the spreadsheet by the User? For example, if I write VBA code to reference a range of data such as:
View 2 Replies View RelatedI need to know the function to move a named sheet to the end of the list so its the last sheet in the workbook. Worksheets("xxxx").Copy After:=Worksheets(?)
Im copying a worksheet and want to move the new sheet to the end but I dont know how to finnish it. I tried to do.
name3 = Worksheet.count + 2
Worksheets("xxxx").Copy After:=Worksheets(name3)
but I get an error and cant debug it.
I am very new to macros I have a list of data all in column D. I need the macro to go through that whole column and for any cell with more than 50 characters stop at 50 and continue the remaining text in the cell below. This can all happen in column E.
View 8 Replies View Relatedthis User Defined Function (UDF) would operate on any specified data (ignoring blanks) over a range. Inputs to the UDF are range and period.
View 9 Replies View RelatedI have a matrix A with 12 rows and 10 columns. My problem is if in the cell(i,j) there is data then the same data should appear in a similar matrix B, but in a cell which is 15 cells behind the cell(i,j).
That is it should start counting upwards from cell (i,j) in B and once it reaches the top of the matrix it should continue counting from the bottom of the immediate left column and go up. When it reaches the 15 cell from cell(i,j) in b, it should print there the value that was in cell(i,j) of A.
I have created a simple button that I want to take me to a certain number of tabs.
I have about 24 tabs. I can't see them all. I create a button that will take me to a specific tab from my main page. This works fine till I rename the tab. I want the code to read a sheet number or something like that instead of the specific name.
Sheets("JobList").Select
Range("A8").Select
This works till i change the name "JobList"
