I have try whole moring to make the multicolumn list in EXCEL 2003.But failed.
Could anyone have a look at the code and correct me?
In the userform,I have a combobox to select the "client",and I have a multicolumn listboxm, to display the related result for the client which is from sheet"orders"
I am a beginner in the EXCEL VBA, so my code attached in the workbook might be in mess.
I've spent the last two days searching ozgrid and the rest of the web with only pieces of the puzzle to show for it.
How can I create a multicolumn listbox on a worksheet using VBA and what properties can I set for it? I've found different ways to create a listbox on a sheet using VBA but not with multiple columns.
Im trying to sort items in two list boxes on a userform. I found some customizable sorting code online here:
[URL]....
But I'm not having any success with it.
I copied the 'Sub SortListBox' code and added it to the bottom of the Code for the Userform.
I then added the following lines to the Userform Initialize procedure:
Run "SortListBox", lbUnitList, 0, 1, 1
Run "SortListBox", lbPOList, 0, 2, 1
This should Sort lbUnitList Alphabetically by Column 1, and sort lbPOList Numerically by Column 1.
However as soon as I add those lines to the Initialize procedure it prevents the userform from opening. No Error message is displayed, it just won't load.
I have attached my workbook. The Userform is called ActiveEquipment.
I've been trying (unsuccessfully) to return a value from the second column in a 4 column listbox, all I can manage to return is the numerical value for the row selected eg if I use: MsgBox listbox1.Value to try and return the result, it shows the number of the selected row in the msgbox.
View 3 Replies View RelatedI have a activex multi-selection list box (on a worksheet). It has two columns, referenced from two columns on the worksheet (state abbreviation, state code) AA7:AB58. I'm using the following code below to transfer selections to cell A1.
View 3 Replies View RelatedI have a multicolumn listbox, and a multidimensional array.
I want to put just SOME values of the array into the listbox, but I ger errors using both .list or .column to access single items, and even using .additem .
I have:
dim variable(2000,2) as string
variable(1,0)="aaa": variable(1,1)="bbb": variable(1,2)="ccc"
variable(2,0)="www": variable(2,1)="awasd": variable(1,2)="asdfa"
....
variable(2000,0)="www": variable(2000,1)="awasd": variable(2000,2)="asdfa"
I don't want to store all 2000 elements, just some ones: how can I do it?
I have a userform That has Several client information textboxes on it including a textbox called txtClientID.
What I would like to do is add a multicolumn listbox to the form and populate it from a worksheet - "sheet3" Columns B to E. These records would be filtered by the txtClientID textbox (this would correspond to a client ID value in column E).
So I would have a listbox that contained all the records from Sheet 3 that relate to the Client ID on the userform.
I am creating a database using excel and I've created a userfrom for ease of data entry and searching the database. But now I am stuck at the searching part.
The sheet is Sheet1 and the userform is UserForm1. Based on the pic that i have attached, user needs to key in the keywords in any of the textboxes and comboboxes in the group box labelled "Organizational detail" and when he/she clicks on the Search button, the userform will display the whole rows where the search results reside onthe listbox. When the user click on the search results on the listbox, the textboxes and comboboxes will be updated with the data on the listbox.
Can a listbox be loaded with the value of a cell?
View 7 Replies View Relatedi have 2 coulmns in a listbox. The columns cant display more than 11 digits. So basically it would look like this 1.23456789E+12. I even tried playing with the Columnwidth but that didnt work.
View 2 Replies View RelatedI have a form control listbox, which is populated with filenames from a specific directory. When the user selects an entry I need that text to appear in a cell in the workbook. This is then concatenated with a folder path to open the file to copy and paste some data out into another workbook. I have tried...
Code:
Sub GetWrbkbkname()
Dim strlist As String
strlist = Sheet1.Listbox18.Text
Sheet1.Cells(1, 1) = strlist
End Sub
But receive the method or data member not found error. The cell link property just returns the position in the list! I need the text!!
The only workound I could think of was populating a space in the SS with the directory contents and using the cell link value in a choose function to return the selected workbook name.
I have a worksheet and for data validation, i do have a dropdown. This is working fine.
I am now trying to create a userform. And I feel for data integrity, I should be using a listbox on the form as well.
I have found examples of different ways to load the list, so I don't think this part will be an issue. But what I cannot find, is if the worksheet row currently has a value (say it is the third item on the list), how do I show THAT on my form?
Example, say we have a list of 10 cities.
Orlando
Tampa
San Francisco
London
Athens
Paris
Chicago
Cairo
Seattle
Atlanta
My wordsheet has the rows populated with the cutomers favorite city to visit.
For John Doe (row3) in column 5 is the city "San Francisco"
When I use my nav keys, how would I "stuff" San Francicso in to the display and still have it able to select a different city?
I would like to find out if I can have the values I selected in a two-column listbox and a one-column listbox in a userform shown in the status bar. It is possible to select more than one value in the list boxes, so the formula needs to be able to add the selected values.
View 2 Replies View RelatedI am trying to create a form where a user can click a button and add a document to a workbook. The file(s) can be hidden on a seperate sheet, but ultimately should be displayed in a List Box or Combo Box. Not sure which would be better in this case. Selecting the item from the list would open the document (either through a double click functionality or a seperate button). I have the beginning of the code below.
Private Sub AddFile_Click()
Dim vFile As Variant
vFile = Application. GetOpenFilename("All Files,*.*", Title:=" Find file to insert")
If LCase(vFile) = "false" Then Exit Sub
Sheets("RefrenceSheet"). OLEObjects.Add Filename:=vFile, Link:=False, DisplayAsIcon:=False, IconLabel:=vFile
End Sub
I am confronting a problem with a ListBox that displays Item by the selection of a ComboBox in the same Userform.
All works like this in the column “A” from my data sheet I have a list of names and in the column J I have a list of years.
What my UserForm1 dose is to select the year column with the ComboBox and display in the ListBox the corresponding name from this year selection. Until there all work fine.
Now I have to display in the TextBoxes form the Userform2 all data form my (data sheet) and this dose not work properly.
What happens is that when I select and Item in my listBox.Userform1, Usrform2 kind of display Items from another person.
I will also attach an example on this thread for a better view of my problem.
I'm trying to do a search of 2 sheets and if the value of column "H" is True(in text) "Label57" is to be visible and "Label58" is to be hidden. And if the value is "False"(in text), "Label58" is to be visible and "Label57" is to be hidden. Hope this all makes sense.
The code below works fine for only one of the sheets(Orders) but not the other(ArchivedOrders).
With Sheets("Orders")
Set r = .Columns("A").Find(Me.ListBox2.Text, , , xlWhole)
If r Is Nothing Then
With Sheets("ArchivedOrders")
Set r = .Columns("A").Find(Me.ListBox2.Text, , , xlWhole)
If r.Offset(0, 7).Value = "True" Then
Label57.Visible = True
Else
Label57.Visible = False.................
I have a worksheet called 'Letters' with data stretching from A2:W5000. I need a Listbox that will display only those entries that fit the following criteria;
Columns A and O have data in them, Column V does not. The other columns can be disregarded for the purposes of this project. Additionally, is it possible for the Listbox entry to show any formatting that appears on the sheet? What I mean is, I have a conditional formatting set up on the sheet to show any duplicate entries, for example if the entry appears twice the cell fill colour is yellow - I need that to be shown in the Listbox too if it is possible.
I have a form with a list box on it, I want the listbox to display a number (1 through 20), the agents name, and a count of how many observations they have had. Unfortunately I have been unable to find an example of how to add multiple columns to a list box. I found the usual listbox1.list(x,x)= "whatever" type stuff but that doesn't seem to work right.
how to populate multiple columns including the headers, or point me to a site that explains it or has code examples?
Here is the data I want to put in the multicolumn listbox (the number and the agent name are from a worksheet, the deskside is a calculation sumproduct based on the 3 sheets that make up the quarter....
By typing either first letter or first two letters in cell A2 the list box should bring up matching street names. Also listbox should manually allow to select required street name by scrolling down.
View 3 Replies View RelatedOn the attached spreadsheet, I have a command button on the search results spreadsheet that opens a userform to show the individual records with populated data.
This is working fine. The problem is when I use the 'drill down' button beforehand.
As an example, I search for the language "Italian". I then drill down to find "Females". When I click the command button and click Find, I only want the 3 records for the females, not the 7 that match the original search.
I know where in the macro changes are required, I just don't know what to change it to.
I'm using a Textbox macro to search my database for a specific date, and return the company name of all entrys for that date, into a ListBox.
Now this is the only way I'm prepared to look at doing, and I have managed to do it...... partially - as stupid as it sounds, I cant get multiple results to list in the ListBox itself, and for the life in me I cant find out how to do it.
Also, once the options have been brought back into the ListBox, I then need code which will then populate further locked TextBox's which the rest of the company info, when selected from the ListBox.
I know its asking alot (or maybe not) but I believe, (unless ive done it a really awkward way, I'm not too far away, I just dont know the code to enter, to be able to do it.
Private Sub CommandButton1_Click()
Dim Nullstring
Application.ScreenUpdating = False
If TextBox1.Value = "" Or Nullstring Then
MsgBox "Please enter a date to search for"
GoTo error1:
End If.....................................
Can you display items from 1 column on a worksheet in 2 columns on a Listbox?
This is to avoid having a Listbox that is too long for the form, (I know I can use a scrollbar and I am but I would still like it shorter if possible).
Ive made a worksheet with a userform and ListBox. The listbox is filled with names. If you click on the last button a msgbox with your selected names is displayed. If you select the button without a selection from the listbox a message pop ups to warn that no selection is made. If you select any name afterwards and click on the button the message still pops up unless you select the first entry from the list ("natalie") then the code is right executed. I'm struggeling with the code for several days. I wonder if by any change somebody wants to correct the code. (I've uploaded my sheet)
View 2 Replies View RelatedIm trying to add coloumn heads to my listbox but its just not working
i was using rowsource to use the first row of the sheet as the headings however this just set the values in the listbox to the rowsource. Here is my code
If Area = "" Then
Dim c As Range
Zip = "*" + Zip + "*"
Me.ListBox1.Clear
For Each c In Range([e2], [e65000].End(xlUp))
If UCase(c) Like UCase(Zip) Then
With Me.ListBox1
.AddItem c
.List(.ListCount - 1, 0) = c.Offset(0, -4).Value
.List(.ListCount - 1, 1) = c.Offset(0, -3).Value
.List(.ListCount - 1, 2) = c.Offset(0, -2).Value.....................
I have a menu with a dropdown control on it. I need it to be multicolumn (4columns, actually) but I do not know how to populate it.
View 2 Replies View RelatedI am trying to create a search where the user types into the text box 'ItemDescription' then hits the 'ItemDescSearch' button (see below code) to pollute the list box 'lbSamDesc' with any partial matches from the specified range. Currently when I click on the button it takes about 8 seconds then no results are displayed in the List Box.
View 9 Replies View RelatedAttached small application. Open the application and click on the LISTBOX button. Code for the Filter by Item button or the Filter by Representative button. I would like to select an item from either of those dropdowns in the search box, click on the relevant button and the list box will populate to show the results.
For example, if I were to select Chocolate Bars from the dropdown and click filter by item, I want to see only the three lines [i.e. line 2, 6 and 7] present in the listbox, and I want to be able to doubleclick on any of those lines to go to the record if I wish.
Similarly, if I select Robert from the other dropdown and click Filter by Representative, I want to see the relevant three lines [i.e. 4, 5 and 8] relating to Robert, present in the listbox, where I can again double click to go to the record [i.e. the data entry userform related to particular record selected.
I have attached a file : Form.xlsm‎
I'm afraid I've run into some trouble with the Listbox function, which I really love, but I can't quite get past this hurdle.
I want to have a listbox which populates by checking an entire column for values, ignoring blank cells, and, if value is present, to also check to see if any value is present in the cell one column to the right and one row down from the cell that has the initial value. If both these conditions are true, to then display both values in the Listbox. In other words, the Listbox would contain two columns.
During this routine, when checking value is present in the second cell, I'm guessing that an IF statement would increment a variable signifying the cell reference by + 1 for column and + 1 for the one row down?
I've been working on a database for a Dutch nursing home, but I'm struggling to get it to work. The file provides for a userform that enables users to search for residents and retrieve their appartmentnumber and the adress of their legal representative.
This userform consists of three parts; in the first, the user can type the full or partial name of the resident of interest in a textbox; in the second phase, all matching registrations are presented in a listbox; and in the third phase, a macro searches for the name selected in the listbox and retrieves the corresponding appartmentnumber and adress.
The first two phases of the userform work fine, but in the third phase, the macro fails to find any matches even though it is practically the same as the macro used in phase 1.
I don't know exactly what the function that I am after is, but, what I am trying to do is this:
- Search columns E2:A11 and sort from highest to lowest.
- Place results of the TEAM NAME (Columns A2:A11) representing the highest to lowest in column B16:B25.