Userform With Multipage: Use A ComboBox That Would Allow The User To Select The Customer
Apr 8, 2008
I wanted to create a userform with multipage. On the first page I want to use a ComboBox that would allow the user to select the customer. The customer name is on the sheet that I named "Customer" which also contains the street address/city/state/zip. What I would like is, once a customer is selected, I want a textbox that will be populated with the correct address taken from the sheet named "customer".
On the second page I'd like to use it for Product Info. I want to have a ComboBox, Text Box, a Command Buttons. The ComboBox is to select the "Model#" from the sheet named Product Info" and the TextBox is for the user to write their comments. One of the Command Button is to be view a sheet named "Quote" and the other is to send the "Quote" through email.
View 2 Replies
ADVERTISEMENT
Jan 11, 2008
I want to force a user to select a value from a Combobox that I set up in a newly created worksheet from inside a macro - while the macro is still running. I have the code to create a new worksheet, size it accordingly, add a Combobox control, assign a range of values for the drop-down list, but do not know how to suspend the macro and force the user to make a selection from this Combobox before continuing. Not even sure if this can be done.
View 4 Replies
View Related
Feb 6, 2009
The macro below in its current state adds data entered from the userform to a specific sheet. I would like to change it so that a player can be selected from combobox named txtmplayer and the data entered be copied to that specific players sheet.
If this information is vital: There are 8 players. Player sheets can be named player1, player2, and so on. I would like to keep same method for entry (finds first available row)
View 7 Replies
View Related
Mar 10, 2013
How do I allow the user to select from a dropdown list but disallow them from entering value into the textbox?
View 1 Replies
View Related
May 22, 2014
Is there any way to set the list from a Combo Box to automatically start in the middle?
Whenever I select a Combo Box, the drop down list always automatically starts at the top of my selected range, ideally I would like it to start in the middle.
For example my Range that I am filling the Combo Box with lists dates: Today()-7 to Today()+7.
At the moment the first item in the combo box list is Today()-7, I would like it to be Today().
View 2 Replies
View Related
Mar 4, 2009
I have a userform which allows user to selected a date formt he calendar. In my code I name the value selected myDate. I want to have a line of code at the begginning of my code that checks if myDate = a date already listed in column H on a sheet named "all dor's". if it does match then a msgbox appear saying "date already entered" and the code return to the opened userform.
View 9 Replies
View Related
Jun 10, 2013
I have a user form that has one combo box on it that right now references one column of data.
Now I am being asked to have three columns of data and the combo box to show one of the three when a certain criteria is met.
I believe it would be easiest to have an additional combox with a change event when the box is populated with "whatever" in the field
So S:3 to S:5 have A, B, C
And EC:1-EC:59, ED:1-ED:59, EE:1-EE:59 contain the data that should show when S:3, S:4, or S:5 is selected.
If S:3 is selected then the list in EC:1 - EC59 would show and so on.
View 2 Replies
View Related
Jan 28, 2007
i'm writing a refrigeration selection user interface, working from values on an excel spreadsheet. how to get the programme to automatically select a value from a list or range once a user has selected corresponding value from a list within a combobox. for example if a user sets the temperature of their refrigerator to -5 celsius i need the programme to automatically select the corresponding value of enthalpy for the air at that temperature.
View 5 Replies
View Related
Apr 17, 2006
I have a userform with a multipage consisting of 4 tabs.
Each one has several combobox's and 1 commandbutton.
As you move through the form the commandbutton moves the data to my worksheet then moves you to the next page. When it reaches the last page it will return you to the first page then unload the form which is great.
The problem I am having is the cursor is not in any of the boxes on the first page. If I click on one of the other tabs then return to first page the first combobox has the focus. All the tab orders are correct. Can anyone point me in the right direction.
Private Sub cmdNext3_Click()
ActiveWorkbook.Sheets("CarDetails").Activate
Range("A1").Select
Do
If IsEmpty(ActiveCell) = False Then
ActiveCell.Offset(1, 0).Select
End If
View 9 Replies
View Related
May 28, 2014
I have a Multipage with 3 pages in userform1, and I just want to add an item to the combobox in userform2 depends on the multipage that is active.
I have the below code but I'm getting an error 'Object doesn't support this propert or method'
Commandbutton in Userform1
[Code] ......
View 1 Replies
View Related
May 7, 2006
I have a userform1 with multipage 1 which has 5 pages. Is it possible to select page 1 from a label on page 5. I have the following code assigned to label 18 on Page 5 but I can't get to Page 1. In fact, the code does absolutely nothing.
Private Sub Label18_Click()
MultiPage1.Value = 0
End Sub
View 9 Replies
View Related
Apr 24, 2007
I'm having a problem setting the multipage tab on a userform in VB. It's kinda weird because the code was working fine until recently, where it's suddenly stopped working properly! The only thing I can think of is that I changed versions of Excel to v2003 recently.
I want to not let the user change tabs unless the inputs entered have been error checked. My code is:
Private Sub MultiPage1_Change()
If Me.MultiPage1.Value > 1 Then
If Range("inputs!dob") = "" Then
Me.MultiPage1.Value = 1
MsgBox ("Please enter your date of birth before continuing.")
End If
End If
End Sub
The tab itself changes fine (ie. shows the tab 1 header), but the contents of the tab are actually the contents of tab 2!
View 9 Replies
View Related
Feb 1, 2007
I'm trying to create a next button from one user form to another. But I can't reach there. I know that I have to use, multi page, but I don't know how!
View 4 Replies
View Related
Jul 2, 2014
Is there anyway to make the number of multipages you have respond to a previous fill in the Userform? Let's say you have a textbox asking for number of requests, if you type 4, there will be 4 multipages with the same fills.
View 4 Replies
View Related
Feb 23, 2010
I am trying to get a scrollbar on a MultiPage UserForm to provide instant results on the active spreadsheet. The spreadsheet is full of charts, and as you move the scrollbar, the charts change. Trouble is, the code I have is VERY slow. Moving the scollbar turns the cursor into an hourglass and that little scrollbar graphic lags about a centimeter behind. Is there faster code out there?
Here is what I have:
NOTE I use both the change event and the Scroll event because using only one gives me only half the functionality of the scrollbar...that is, without both, either the arrows on the scrollbar work or only the slider works.
View 5 Replies
View Related
Apr 13, 2007
Does anyone knows a simple way to insert a table on a MultiPage UserForm ?
This MultiPage appears on a excel spreadsheet when the user click on a button. I would like to put a table on one of the pages such that the user can fill in this table.
View 5 Replies
View Related
May 6, 2007
I know you don't usually print userforms & when you do I know the code, however, how can you print one page of a multipage userform when the page has a vertical scrollbar & you want to print the whole page, not just what is showing on screen?
View 2 Replies
View Related
Mar 30, 2013
I have a UserForm which has a multipage with 2 pages, each page has many controls and associated code. I now need to add a third page but cannot get the code supplied to work.
VB:
Sub AddNewPage() Dim NewPage As Page Set NewPage = frmColEd.mpCust.Pages.Add(, , 2) NewPage.Caption = ThisWorkbook.Sheets(2).Text frmColEd.Show End Sub
frmColEd is the name of the user form and mpCust the name of the multipage on that user form. I keep getting a 'Type Mismatch' on the SetNewPage=.... line no matter how I change it.
View 2 Replies
View Related
Nov 7, 2011
I have placed next and back buttons in the userform. I have a total of 8 pages.
The problem is that page 2 and 4 is not active. And I cannot see why. In the properties of the pages the data is exactly the same at all pages.
Are there errors in my code?
Code:
Private Sub cmdNext_Click()
MultiPage1.Value = MultiPage1.Value + 1
End Sub
Private Sub cmdBack_Click()
Dim intPage As Integer
intPage = MultiPage1.Value
Do
[Code] ..........
View 2 Replies
View Related
Nov 17, 2011
I have two pages in the userform. What I was trying to do is that certain textbox (txtDate) needs to be entered on the page1 before going to page2. The user can still select page2 however I want the vba to bring the page back to page1 if the data is missing.
Here is the code:
Private Sub MultiPage1_Change()
If MultiPage1.Value = 1 And txtDate = "" Then
MultiPage1.Value = 0
txtDate .BackColor = &H40C0
End If
It didn't work completely - the tab selection on top was on page1 however all the controls shown are still the controls under page2. I have to manulally click page1.
I also tried MultiPage1.Page(0).Enabled=True but it didn't work either.
View 3 Replies
View Related
Jan 25, 2010
The code below works when the textbox (txtExt) is not within a multipage but doesn't when it is. I'm presuming i need to reference the multipage and page number but can't seem to get the right syntax.
Private Sub txtExt_Exit(ByVal Cancel As MSForms.ReturnBoolean)
Details.Activate
Dim agExt As String
Dim extFind As Range
agExt = txtExt.Value
Data.Range("M3:M120").ClearContents
With Details
Set extFind = Range("B1")
For lCount = 1 To WorksheetFunction.CountIf(Columns(2), agExt)
Set extFind = Details.Columns(2).Find(What:=agExt, After:=extFind, LookIn:=xlValues, LookAt:=xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, MatchCase:=False)
With extFind...................
View 9 Replies
View Related
Mar 21, 2004
I have a multipage on a userform and wanted to change the back color. I can change this color fin for buttons and the userform itself, but I don't see the option in the properties for a multipage. And I didn't see it as an available command from vba. Am I missing something here?
View 9 Replies
View Related
Nov 2, 2006
re: Validating Textbox to work on a simple form.)
View 2 Replies
View Related
Feb 13, 2007
What I'm trying to do:
Create a "search" userform that pulls data from a spreadsheet of raw data (hardware specs) and organizes it into a multipage control. Each page of the MultiPage has a different piece of hardware with simliar data entry categories (height, weight, calibration date for example).
Each page at the moment contains labels and textboxes only. The idea is to place data from the spreadsheet into these textboxes, and create new pages as needed during runtime.
My current issues:
Just for testing/ debugging, I have a "_Change()" code that is triggered by changing pages within the Multipage. When I run the control, I trigger the change, but the textboxes and labels disappear.
I don't have much code to show, other than basic _Change() structure containing a msgbox for debugging.
This is related to a locked thread, where "imgUpdating" and "DoEvents" were referenced. I tried DoEvents, without success. I also don't know what "imgUpdating" is, but it sounds like it helped the other person with a similar issue:
UserForm Controls not displaying at runtime
View 7 Replies
View Related
Jul 20, 2014
I've got a table in a worksheet. Every time the user double-clicks on one of the cells containing the names for each of the listed items, a userform pops up displaying information about that item. Besides other controls, this userform has an Image Box, that displays a picture of the item, and a Multipage.
What I want to do is to display the same picture shown by the Image Box, on to the Multipage, using the same file, but, and here's the quirk, aditionally, change it's size, turn it monochrome, and set its transparency to a different value.
I've attached an example of the final look I'm seeking. This was done by prior editing of a copy of the image and inserting it using LoadPicture, but this solution is too troublesome as this is done solely for aesthetical purposes, thus not justifying all the hassle a user has to go through everytime he wishes to add a new item to the table.
View 1 Replies
View Related
May 9, 2009
I've started experiencing a strange problem. The control toolbox keeps appearing when the first page on a multipage userform is activated. I can't figure out what's causing this, and after searching the forum, with no luck, I thought I would see if anybody else is experiencing the same problem, and how to fix it.
View 2 Replies
View Related
Dec 3, 2006
I am in the process of creating a module to validate a MulitPage UserForm that is composed of, among other controls, multiple frames, each containing a TextBox and two OptionButtons. I need to identify those frames where the TextBox value is not null and neither of the OptionButtons have been selected. The module will pass as variables the TextBox value, OptionButton captions and Frame caption to another module that will create a UserForm with the invalid Frame/TextBox/OptionButtons sets for the user to correct.
The interim code listed below runs as a command button on a test UserForm. The MsgBox displays only the first of the OptionButton’s caption as Opt1 and Opt2. Can anyone tell me why and where I went awry?
Public WithEvents As MSforms.TextBox, Opt1 As String, Opt2 As String, vtxt As Long, vFrame As String, vTag As String
Private Sub CommandButton1_Click()
Dim pPage As Page, cCont As Control, vCont As MSforms.Control
'Dim Opt1 As String, Opt2 As String, vtxt As Long, vFrame As String, vTag As String
Is there a more elegant way of accomplishing this? (Control Tags are already spoken for.)
View 4 Replies
View Related
Dec 29, 2006
I have successfully created validation code that operates as a command button. The code listed below identifies in a MultiPage UserForm non- null TextBoxes whose pair of associated OptionButtons have not been selected. (The TextBox and OptionButtons all lie within a Frame and their are 60+ sets of these throughout the UserForm.) A MessageBox alerts user to select one of the OptionButtons.
Private Sub CommandButton1_Click()
Dim cFrameT As Control
Dim cCtrlF() As Control
Dim pPage As Page
Dim cCtrl() As Control
Dim Num As Integer
Dim FNum As Integer
Dim vOpt As Boolean
Dim Opt() As String
Dim lPage As Long
Dim vFrame As String
Redim Opt(Num) As String
Redim cCtrl(FNum) As Control
Redim cCtrlF(Num) As Control
Num = 0
FNum = 0
' Loops through all Multipage pages
For lPage = 0 To Me.MultiPage1.Pages.Count - 1..............
View 2 Replies
View Related
Mar 8, 2008
I am trying to figure out how to initialise a multipage userform. I have two worksheets, one with a contact 'database', and one temp that holds search results.
I understand how to load data from the worksheet and write it back using a single useform, but this is foxing me just a tad!
View 3 Replies
View Related
Feb 4, 2014
I have a userform which has a number of multipage controls nested inside each. So, the parent is Multipage1 with 2 pages. Page 1 of Multipage1 has a second multipage control (Multipage2 which has 4 pages). In Multipage2, page1 there is a 3rd Multipage control (Multipage3 which has 2 pages). In Multipage2, page 2 there is another multipage control (Multipage4 which has 3 pages)...and so on! I know this sounds complicated, but I am trying to get the caption of the selected multipage.
There are commandbuttons in all of the pages, which when clicked need to return the caption name of the multipage where they sit.
I have started the following code, but suspect there must be a better solution:
VB:
With Sales
If .MultiPage1.Value = 0 Then
Hardware_Purchases_Input.TextBox6.Value = .MultiPage1.SelectedItem.Caption & " - " & .MultiPage2.SelectedItem.Caption & " - " & .MultiPage3.SelectedItem.Caption
End If
End With
View 3 Replies
View Related
