Next And Back Buttons In Multipage Userform
Nov 7, 2011
I have placed next and back buttons in the userform. I have a total of 8 pages.
The problem is that page 2 and 4 is not active. And I cannot see why. In the properties of the pages the data is exactly the same at all pages.
Are there errors in my code?
Code:
Private Sub cmdNext_Click()
MultiPage1.Value = MultiPage1.Value + 1
End Sub
Private Sub cmdBack_Click()
Dim intPage As Integer
intPage = MultiPage1.Value
Do
[Code] ..........
View 2 Replies
ADVERTISEMENT
Sep 30, 2009
I am trying to do is move between the MultiPage using Next and Back Buttons. I have attached what I have acheived already which is the majority of the work. There's just one minor issue I'm trying to get around.
The back button is disabled when on page 1 and the next button disabled when on the last page, but when the 'Seal Viewer' is opened from the spreadsheet, it starts off on the first Page with the option available to go back which we obviously do not want Yet when we press next and then back the function works correctly.
View 3 Replies
View Related
Nov 17, 2011
I have two pages in the userform. What I was trying to do is that certain textbox (txtDate) needs to be entered on the page1 before going to page2. The user can still select page2 however I want the vba to bring the page back to page1 if the data is missing.
Here is the code:
Private Sub MultiPage1_Change()
If MultiPage1.Value = 1 And txtDate = "" Then
MultiPage1.Value = 0
txtDate .BackColor = &H40C0
End If
It didn't work completely - the tab selection on top was on page1 however all the controls shown are still the controls under page2. I have to manulally click page1.
I also tried MultiPage1.Page(0).Enabled=True but it didn't work either.
View 3 Replies
View Related
Sep 6, 2002
I'd like to insert some radio buttons in a worksheet that activate a hyperlink to a web page and then be able to go back to where I started (ie the radio button)
I can link the button to a macro which was a recording of clicking on a hyperlink. The trouble is when I hit the return arrow to return to the sheet from the web page I go back to the location of the hyperlink not where I started from.
Is there a way to do this with the buttons.
If I can rearrange the sheet to allow for more narrow columns I may be able to just use the hyperlink friendly name argument and do it that way but I'm not so sure I can insert more narrow columns without messing up the layout of the whole sheet. With a button I can float several of them over an area regardless of the width of the columns.
View 1 Replies
View Related
Apr 24, 2007
I'm having a problem setting the multipage tab on a userform in VB. It's kinda weird because the code was working fine until recently, where it's suddenly stopped working properly! The only thing I can think of is that I changed versions of Excel to v2003 recently.
I want to not let the user change tabs unless the inputs entered have been error checked. My code is:
Private Sub MultiPage1_Change()
If Me.MultiPage1.Value > 1 Then
If Range("inputs!dob") = "" Then
Me.MultiPage1.Value = 1
MsgBox ("Please enter your date of birth before continuing.")
End If
End If
End Sub
The tab itself changes fine (ie. shows the tab 1 header), but the contents of the tab are actually the contents of tab 2!
View 9 Replies
View Related
Feb 1, 2007
I'm trying to create a next button from one user form to another. But I can't reach there. I know that I have to use, multi page, but I don't know how!
View 4 Replies
View Related
Jul 2, 2014
Is there anyway to make the number of multipages you have respond to a previous fill in the Userform? Let's say you have a textbox asking for number of requests, if you type 4, there will be 4 multipages with the same fills.
View 4 Replies
View Related
Feb 23, 2010
I am trying to get a scrollbar on a MultiPage UserForm to provide instant results on the active spreadsheet. The spreadsheet is full of charts, and as you move the scrollbar, the charts change. Trouble is, the code I have is VERY slow. Moving the scollbar turns the cursor into an hourglass and that little scrollbar graphic lags about a centimeter behind. Is there faster code out there?
Here is what I have:
NOTE I use both the change event and the Scroll event because using only one gives me only half the functionality of the scrollbar...that is, without both, either the arrows on the scrollbar work or only the slider works.
View 5 Replies
View Related
Apr 13, 2007
Does anyone knows a simple way to insert a table on a MultiPage UserForm ?
This MultiPage appears on a excel spreadsheet when the user click on a button. I would like to put a table on one of the pages such that the user can fill in this table.
View 5 Replies
View Related
May 6, 2007
I know you don't usually print userforms & when you do I know the code, however, how can you print one page of a multipage userform when the page has a vertical scrollbar & you want to print the whole page, not just what is showing on screen?
View 2 Replies
View Related
Mar 30, 2013
I have a UserForm which has a multipage with 2 pages, each page has many controls and associated code. I now need to add a third page but cannot get the code supplied to work.
VB:
Sub AddNewPage() Dim NewPage As Page Set NewPage = frmColEd.mpCust.Pages.Add(, , 2) NewPage.Caption = ThisWorkbook.Sheets(2).Text frmColEd.Show End Sub
frmColEd is the name of the user form and mpCust the name of the multipage on that user form. I keep getting a 'Type Mismatch' on the SetNewPage=.... line no matter how I change it.
View 2 Replies
View Related
Jan 25, 2010
The code below works when the textbox (txtExt) is not within a multipage but doesn't when it is. I'm presuming i need to reference the multipage and page number but can't seem to get the right syntax.
Private Sub txtExt_Exit(ByVal Cancel As MSForms.ReturnBoolean)
Details.Activate
Dim agExt As String
Dim extFind As Range
agExt = txtExt.Value
Data.Range("M3:M120").ClearContents
With Details
Set extFind = Range("B1")
For lCount = 1 To WorksheetFunction.CountIf(Columns(2), agExt)
Set extFind = Details.Columns(2).Find(What:=agExt, After:=extFind, LookIn:=xlValues, LookAt:=xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, MatchCase:=False)
With extFind...................
View 9 Replies
View Related
Mar 21, 2004
I have a multipage on a userform and wanted to change the back color. I can change this color fin for buttons and the userform itself, but I don't see the option in the properties for a multipage. And I didn't see it as an available command from vba. Am I missing something here?
View 9 Replies
View Related
Nov 2, 2006
re: Validating Textbox to work on a simple form.)
View 2 Replies
View Related
Feb 13, 2007
What I'm trying to do:
Create a "search" userform that pulls data from a spreadsheet of raw data (hardware specs) and organizes it into a multipage control. Each page of the MultiPage has a different piece of hardware with simliar data entry categories (height, weight, calibration date for example).
Each page at the moment contains labels and textboxes only. The idea is to place data from the spreadsheet into these textboxes, and create new pages as needed during runtime.
My current issues:
Just for testing/ debugging, I have a "_Change()" code that is triggered by changing pages within the Multipage. When I run the control, I trigger the change, but the textboxes and labels disappear.
I don't have much code to show, other than basic _Change() structure containing a msgbox for debugging.
This is related to a locked thread, where "imgUpdating" and "DoEvents" were referenced. I tried DoEvents, without success. I also don't know what "imgUpdating" is, but it sounds like it helped the other person with a similar issue:
UserForm Controls not displaying at runtime
View 7 Replies
View Related
Jul 20, 2014
I've got a table in a worksheet. Every time the user double-clicks on one of the cells containing the names for each of the listed items, a userform pops up displaying information about that item. Besides other controls, this userform has an Image Box, that displays a picture of the item, and a Multipage.
What I want to do is to display the same picture shown by the Image Box, on to the Multipage, using the same file, but, and here's the quirk, aditionally, change it's size, turn it monochrome, and set its transparency to a different value.
I've attached an example of the final look I'm seeking. This was done by prior editing of a copy of the image and inserting it using LoadPicture, but this solution is too troublesome as this is done solely for aesthetical purposes, thus not justifying all the hassle a user has to go through everytime he wishes to add a new item to the table.
View 1 Replies
View Related
May 9, 2009
I've started experiencing a strange problem. The control toolbox keeps appearing when the first page on a multipage userform is activated. I can't figure out what's causing this, and after searching the forum, with no luck, I thought I would see if anybody else is experiencing the same problem, and how to fix it.
View 2 Replies
View Related
Dec 3, 2006
I am in the process of creating a module to validate a MulitPage UserForm that is composed of, among other controls, multiple frames, each containing a TextBox and two OptionButtons. I need to identify those frames where the TextBox value is not null and neither of the OptionButtons have been selected. The module will pass as variables the TextBox value, OptionButton captions and Frame caption to another module that will create a UserForm with the invalid Frame/TextBox/OptionButtons sets for the user to correct.
The interim code listed below runs as a command button on a test UserForm. The MsgBox displays only the first of the OptionButton’s caption as Opt1 and Opt2. Can anyone tell me why and where I went awry?
Public WithEvents As MSforms.TextBox, Opt1 As String, Opt2 As String, vtxt As Long, vFrame As String, vTag As String
Private Sub CommandButton1_Click()
Dim pPage As Page, cCont As Control, vCont As MSforms.Control
'Dim Opt1 As String, Opt2 As String, vtxt As Long, vFrame As String, vTag As String
Is there a more elegant way of accomplishing this? (Control Tags are already spoken for.)
View 4 Replies
View Related
Dec 29, 2006
I have successfully created validation code that operates as a command button. The code listed below identifies in a MultiPage UserForm non- null TextBoxes whose pair of associated OptionButtons have not been selected. (The TextBox and OptionButtons all lie within a Frame and their are 60+ sets of these throughout the UserForm.) A MessageBox alerts user to select one of the OptionButtons.
Private Sub CommandButton1_Click()
Dim cFrameT As Control
Dim cCtrlF() As Control
Dim pPage As Page
Dim cCtrl() As Control
Dim Num As Integer
Dim FNum As Integer
Dim vOpt As Boolean
Dim Opt() As String
Dim lPage As Long
Dim vFrame As String
Redim Opt(Num) As String
Redim cCtrl(FNum) As Control
Redim cCtrlF(Num) As Control
Num = 0
FNum = 0
' Loops through all Multipage pages
For lPage = 0 To Me.MultiPage1.Pages.Count - 1..............
View 2 Replies
View Related
Mar 8, 2008
I am trying to figure out how to initialise a multipage userform. I have two worksheets, one with a contact 'database', and one temp that holds search results.
I understand how to load data from the worksheet and write it back using a single useform, but this is foxing me just a tad!
View 3 Replies
View Related
Feb 4, 2014
I have a userform which has a number of multipage controls nested inside each. So, the parent is Multipage1 with 2 pages. Page 1 of Multipage1 has a second multipage control (Multipage2 which has 4 pages). In Multipage2, page1 there is a 3rd Multipage control (Multipage3 which has 2 pages). In Multipage2, page 2 there is another multipage control (Multipage4 which has 3 pages)...and so on! I know this sounds complicated, but I am trying to get the caption of the selected multipage.
There are commandbuttons in all of the pages, which when clicked need to return the caption name of the multipage where they sit.
I have started the following code, but suspect there must be a better solution:
VB:
With Sales
If .MultiPage1.Value = 0 Then
Hardware_Purchases_Input.TextBox6.Value = .MultiPage1.SelectedItem.Caption & " - " & .MultiPage2.SelectedItem.Caption & " - " & .MultiPage3.SelectedItem.Caption
End If
End With
View 3 Replies
View Related
Jun 3, 2014
I am working on Excel 2010 and am still new at this
Attached is a UserForm with a Multipage
I have added TextBoxes to Page 1 to Page 3
Here is my problem
The Macro to show the form is not working.Also I need to populate TextBox1 with information on the "Data" sheet.
TextBox1 must show information in C3
TextBox2 must show information in C4, and
TextBox3 must show information in C2
I have tried some VB on the TextBox but it does not update, not sure if i need a command button.
View 4 Replies
View Related
Dec 8, 2008
I'm trying to create a userform to act as a walk-through for a process. I've settled on using a multipage to conserve the required screen real-estate, and break the process into natural 'stages'. I've happily got these stages fixed into the userform's pages, with a couple of command buttons running events OnClick - but cannot figure how to get the spinbutton to navigate between the pages.
View 5 Replies
View Related
Oct 22, 2012
I have a MultiPage User Form, it has 2 tabs within the User Form.
I want to display Tab #1 (the first tab) as the 'visible/active' Tab for the user upon opening the user form. How do I do that?
Usually, I would open a User Form with frmMyForm.Show in a private module, to show the form. But now I have 2 Tabs, and want to select a certain Tab upon opening it?
View 2 Replies
View Related
Dec 21, 2009
I'm using MultiPage in a UserForm
I have multiple worksheets that can range from: HOLE 1 and go up to HOLE 30
I have other multiple worksheets that can range from: SAFETY 1 and go up to SAFETY 30
When I use the Code below it always goes to the 1st worksheet named either HOLE 1 or SAFETY 1
How can I have it so that when I click on the MultiPage Tab that it goes to the last sheet on the right for each?
Example: If I'm on SAFETY 5 it would go to that sheet, and not SAFETY 1 like it does now.
Here is my
Private Sub MultiPage1_Change()
Select Case MultiPage1.Value
Case 0 'page 1
Workbooks("Workbook.xls").Sheets _
("HOLE 1").Activate
Case 1 'page 2
Workbooks("Workbook.xls").Sheets _
("SAFETY 1").Activate
End Sub
View 11 Replies
View Related
Apr 8, 2008
I wanted to create a userform with multipage. On the first page I want to use a ComboBox that would allow the user to select the customer. The customer name is on the sheet that I named "Customer" which also contains the street address/city/state/zip. What I would like is, once a customer is selected, I want a textbox that will be populated with the correct address taken from the sheet named "customer".
On the second page I'd like to use it for Product Info. I want to have a ComboBox, Text Box, a Command Buttons. The ComboBox is to select the "Model#" from the sheet named Product Info" and the TextBox is for the user to write their comments. One of the Command Button is to be view a sheet named "Quote" and the other is to send the "Quote" through email.
View 2 Replies
View Related
Apr 8, 2009
I'm trying to make a command button copy the text from a text box on a multipage control to the active cell in the sheet. I have been able to make it paste the text once it is manually selected and copied to the clipboard but that is all. I've tried recording a macro but that doesn't seem to work in the userform. I need it to copy the text from the active multipage tab (from a textbox) and paste into the sheet's active cell.
View 9 Replies
View Related
Jan 30, 2009
I want to access the Properties of a number of controls in a running form, and these controls may or may not be contained in a Frame or a MultiPage.
In particular I want the Top and Left for these controls, which means I have to first find out if the control is contained in a Frame or MultiPage so I can get the reference for Top and Left. I'm ok with doing this for controls inside a Frame, but the MultiPage is eluding me. I get an error when I try to access these controls and it looks like they are actually owned by the individual Pages of the MultiPage.
how do I find out if a given control is contained in a given MultiPage?
Validate UserForm MultiPage and Frame Controls
View 3 Replies
View Related
Apr 17, 2014
I have a multipage wizard like userform that for each page has check box selection choices a user can pick from. The sample I've attached uses animal attributes for 2 animals. What I'd like to have is code that populates the worksheet with the animal under consideration (determined by the Frame Caption) in say A5, then populates the attribute selections made starting in B5 with no blank rows in between if they chose not to mark a checkbox.
So for animal one on page 1 of the multipage form, if the user selected attributes 1, 3, 4, and 6 and clicked the "NEXT" button on that page, animal one appears in A5 and then those attribute selections would be in B5, B6, B7, and B8. If the user then selected for animal 2 on page 2 of the multipage form, attributes 2 and 6 and clicked the "NEXT" button on that page, then animal two would appear in A9 with the selections appearing in B9 and B10.
I should mention that the number of rows in Table 1 may grow (or shrink) row size with additional rows added (or deleted) by the user. Not sure if it matters.
View 1 Replies
View Related
Feb 21, 2013
We created a database for our employees who have security items and other things we need to keep track. We created a spreadsheet where data was entered on Sheet2 (Entry Form) and then by clicking various buttons would be thrown over to Sheet1 (MasterList) and put in alphabetical order. Then last week he said lets change it to a User form where i can put all the data, be able to tab through my text boxes and make the whole process of entering information faster and more efficient.. but now hes gone and I'm left with his macros and all this stuff i don't really understand! I have been doing pretty well on my own but im stuck "Search Employee" Here is what i have...
VB:
Private Sub SearchEmployeeButton_Click()
LastName.Value = Range("A500").Value
FirstName.Value = Range("B500").Value
[Code]....
use code tags around code. Posting code without them makes your code hard to read and difficult to be copied for testing. Highlight your code and click the # at the top of your post window.
View 2 Replies
View Related
