Difference between these two statements. The first one works perfectly while the second one returns an error. Also why is the best scenario to use IF and Then on a single line?
[Code].....
2nd one with error:
[Code] .....
I have a multiple line texts I want to convert it in single line like for Example:
The following contents is to be converted in a single line
contents:
[aaaaaaaa] [bbbbbbb]......so on
[cccccccc] [ddddddd]......so on
[eeeeeeee] [fffffffffff]......so on
Result:
[aaaaaaaa] [bbbbbbb] [cccccccc] [ddddddd] [eeeeeeee] [fffffffffff]....so on
Why is the VBA for putting a simple border around a cell so convoluted. For example cell A2:
Code:
Sub CellBorder()
Range("A2").Select
With Selection.Borders(xlEdgeLeft)
.LineStyle = xlContinuous
.Weight = xlThin
[Code] ........
So many lines to put a simple - single line border (square) around a cell.
Is it possible to have multiple VBA commands on a single line with a separator ( ; or , ) of some kind?
I am trying to keep my code as short as possible (from a scrolling perspective) and would like to have something like the following:
Dim MyArray(1 to 20, 1 to 3)
MyArray(1,1) = "Sheet1" ; MyArray(1,2) = "D8" ; MyArray(1,3) = "D9"
MyArray(2,1) = "Sheet1" ; MyArray(2,2) = "C49" ; MyArray(2,3) = "w3"
MyArray(3,1) = "Sheet1" ; MyArray(3,2) = "A23" ; MyArray(3,3) = "AB12"
MyArray(4,1) = "Sheet1" ; MyArray(4,2) = "Z19" ; MyArray(4,3) = "W12"
MyArray(5,1) = "Sheet1" ; MyArray(5,2) = "Q32" ; MyArray(5,3) = "Q23"
I am trying to count the number of commas in each line of my Excel file. So I first decided to count the total number of rows and then count the number of commas in each row. I wrote this code. But I keep getting an error saying Next without for.
Sub Give_The_Last_Row()
Selection.SpecialCells(xlCellTypeLastCell).Select
LastRow = ActiveCell.Row
[Code]....
I have to worksheets: Sheet1, Sheet2. In sheet 1, I have some data like this (in first col is 1, second col is a, third col is c etc. ):
1 a b c d
2 e f g h
.
.
.
.
I need in sheet 2 in range A1(only in this range one big text), something like this: a,c,e,g ........ ( row1-col2,row1-col4,row1-col2,row1-col4 ......) ( separated by ","). The number of rows from sheet 1 is variable. The dataf a,b,c,d,e,f,g,h ... is some random text.
Single coding line into multiple using underscore
How can i break this up
Showed a line chart using 2 vertical axis where the first was a single line along the graph (ie. 42%) then the second data series was a single data point that was above or below the line which easily showed if the result lied above or below the threshold.
How to get a straight line across the body of the just to be used as the theshold line?
I had the following code that worked great with Excel 2003, but I receive an error with Excel 2007.
Dim Master As Workbook
Set Master = Workbooks("Master.xls")
For Each wb In Workbooks
wb.Activate
If wb.Name Like "S04*" Then _
If Not Range("A2") = Empty Then _
Range(Cells(Rows.Count, 1).End(xlUp), Range("A2")).EntireRow.Copy _
Master.ActiveSheet.Cells(Rows.Count, 1).End(xlUp).Offset(1)
Next wb
I receive error 1004 "application defined or object defined error" when it tries to paste to the "Master" sheet using the the above lines.
Is there something in the formatting that has changed with 2007? I'm guessing I have to slightly change the line in bold.
My basic problem is I compile a newsletter for my company. Many people write me E-mails and i paste their "daily accomplishments" into a template. My question is if there is an easy way to insert bullets at the beginning of each line inside the cell. My company wants it prepared with a certain type. I am attaching a sample.
View 2 Replies View RelatedI have some code (authored by Dangler) that i want to pull not just one range but also the contents of one specific cell and then copy the range and cell to a line on another spreadsheet.
Question:
f .Cells(i, 8).Value > 0 Then
.Range(Cells(i, 1), Cells(i, 200)).Copy
Sheets("all").Range("a65536").End(xlUp).Offset(1).PasteSpecial (xlValues)
End If
I want to add a single cells contents to the LINE that is being copied .... something like this...
f .Cells(i, 8).Value > 0 Then
.Range(Cells(i, 1), Cells(i, 200)) AND A1.Copy
Sheets("all").Range("a65536").End(xlUp).Offset(1).PasteSpecial (xlValues)
End If
the output would be like this: CELL CONTENTS, RANGE CONTENTS
or
K21, 40012122 400 450 450 50 001 BAGS
I import data into an excel spreadsheet where a unique job number may have multiple costs against it. These import as separate lines, repeating the job number.
The data imports on a sheet called 'DataImport'. From that sheet I transfer some of the imported fields onto another sheet.
What I need to be able to do is transfer the job number and a sum of the costs onto the other sheet.
The data is run regularly and I delete all the fields on the DataImport sheet in the macro each time the import is run.
I'm trying to search for a column by looking for a specific column header and then format the entire column in the specific number format desired, but I keep getting an error message with this line.
Code:
With Rows("1:1")
.Find(what:="Go Live Date").Column.NumberFormat = "m/d/yyyy"
End With
In VBA, is it possible to write to a text file, on 1 single line (without carriage return or line feed) the values of a dynamic array? For instance, I have the array:
Dim my(n) As Double 'n is changeable
my(0) = 0
my(1) = 1
my(2) = 2
.....
I want to write to a text file, like this: Write #filename, my(0), my(1), my(2) '..... until my(n) but n is changing
I want them on 1 line, because I use the other direction (up - down) for other things).
I am getting this error and where th If not starts its is in red showing that is where the issue is:
HTML Code:
Sub RemoveRows()
Dim LR As Long, i As Long
Dim ws As Worksheet
Set ws = Worksheets("100 Airports")
LR = Range("B" & Rows.Count).End(xlUp).Row
For i = LR To 10 Step -1
[Code] .....
I have some code below. I have error handling in place for when it tries to open a specific file. If it isn't there then user has option to continue and ignore this file, or browse and select a new one.
The problem is, when the user wants to ignore the file, the "Resume Next" continues to run the VBA assuming the file was ok i.e. the code after the line to open the file. What I would like is for it to skip the succeeding code and go to look for the next file.
Below is the VBA:
Code:
For i = 0 To 2 Step 1
'add in error handling for if the file is missing
On Error GoTo MissingFile
Workbooks.Open Filename:="\hbeu.adroot.hsbcdfsrootgb002hfcfinance01fnce" & qfolder & "Data" & qfile(i), UpdateLinks:=False, ReadOnly:=True
[Code] .........
Missing File:
qMissingPrompt = "There was an error opening data file. Click OK to browse or Cancel to ignore and move to next file"
qAns = MsgBox(qMissingPrompt, vbOKCancel)
'click cancel - ignore error and move onto the next file
If qAns = vbCancel Then
[Code] .......
So, where it says Resume Next, currently it will start running the following (after On Error Goto 0)
Code:
Set datawb = ActiveWorkbook
range("A2").Select
Do Until ActiveCell.Value = ""
etc.
What I would like it to do is go back to is to go to the next i
Code:
For i = 0 To 2 Step 1
Or even to go to the 'Next' statement at the end so that it moves onto the Next i and tries to open the next file.
The following IF statement isnt working, so im missing something. If A2 says YES, i want the cell with this statement to be blank. However, if A2 has a date, I want this cell to be that date + 45 days. How can I make this correct?
=IF(A2="","",A2+45,IF(A2=yes,""))
You must install "Analysis TookPak-VBA" before doing this; check in your Excel's Tools/Add-Ins menu. Paste this long function (see below) in an Excel's worksheet (any cell) and press F9 (calculate) until you see at least 2 identical numbers. Real life's lottery does not have repeating numbers. I can disable this repetition by using cells relation but I want to use just one (1) cell. Any expert wants to challenge? If not, you can use VBA. But it still requires one (1) line of codes.
=RANDBETWEEN(1,50)&" "&RANDBETWEEN(1,50)&" "&RANDBETWEEN(1,50)&" "&RANDBETWEEN(1,50)&" "&RANDBETWEEN(1,50)&" "&RANDBETWEEN(1,50)
I have one row per day of the month in column A. each row has one or more cell entries in column B .... to column (variable) Right now I use a formula =concatenate(B2,CHAR(10),C2,CHAR(10),D2.....) for as long as it has to be, but this has its limits and requires a lot of editing as the number of filled cells for each row vary.
would it be possible with some macro code to manage the variable number of cells and then insert verything, wrapped text, in a single cell (can be cell Bx or a cell in a new column added next to the dates column) As soon as everything is in the single cell, the original data cells can be emtied. I can record a macro but that does not allow me to manage the variable number of cells . a small sample file attached.
So the issue I am having is that I have a worksheet with two long rows of value. If the user enters the incorrect value, the program gives a error case of 1004. If and when this error occurs I want the program to send a MessageBox to the user then end the program. The problem that I am running into is that whenever I write On Error Goto... It Goes to the label whenever any runtime error occurs. My belief is that there has to be a way to only check for a runtime error on a single line of code rather than the entire sub.
View 3 Replies View Related1st - Need a macro to change a range of cells colours based on a single cell having a value greater than 0.001. ie. cells A1 - G1 need to change to grey based on cell F1 having a value greater than 0.001 entered in it?
2nd - Also a macro for deleting the text contents of cell C1 based on cell F1 having a value greater than 0.001. Therefor if cell F1 has a number greater than 0.001 it changes the colour of celss A1 - G1 and also deletes the text in cell C1?
I have the data to import / read in a pdf, in a doc, or in an Excel worksheet whichever is easier to use. I need to import the data, parse it into the correct cells for that row and then repeat the import until the end of the file. Not all the cells are in each group of data to import, so those cells will be null for that row. Some of the data for one cell may be in up to 14 lines in the data file. I have be concatenating these data rows into one cell. There are 48,000 lines in the file to import or I would do this manually. I am assuming that doing this in VBA would be the most efficient method.
View 11 Replies View RelatedOur small family business has a mailing campaign that we track with excel. However, we're very concerned about users opening the macro-filled master spreadsheet. Instead, we'd like a macro to do everything for them.
When a letter comes back in the mail with a bad address, the user types the Street number and street name such as "1234 Main St" into $A2 of c:dropbox eturned.xlsm, presses the macro button, and it should do the following:
Opens and Searches "Sheet1", "column S", in the file c:dropboxmaster1.xlsm, and finds the LAST instance of the address typed.Selects that entire rowCopies the entire row.Pastes the contents into the row of the active cell in the destination spreadsheet, overwriting what was there before. Such as $2:$2 if the address was typed in $A2.In the master1.xlsm spreadsheet, sets the entire copied row color to "gray".closes master1.xlsm and saves changes.
The end result is that the user now has an identical row of information in their spreadsheet, and the master spreadsheet's row is colored gray indicating it has been completed.
Other notes:I'm open to more efficient steps than this if you have them.There are approx 5,000 records to search through in master1.xlsx at any given time.
I have about 180 workbooks which I need to compile into a Master Schedule.
All the tab 1's are different, these feed into tab 2, which the data has the same formatting throughout. The 2nd tab has the same data for A:F 1 but cells A:2 - F:2 down to row 9 are populated from tab 1, therefore different in each. I am trying to get a Master schedule that lifts the data in the fed cells into a line by line spreadsheet?
Is there a way I can get excel to look at a folder, then every workbook in it, the at the 2nd tab in every workbook, then list the cells as described above? I am not after a consolidation of this data, but a full list?
I'm trying to combine 2 cells that both have text on multiple lines separated by line breaks. I want to keep the formatting so that when both cells are combined, line one from cell 1 and line 1 from cell 2 are on the same line in the new combined cell. This is easy to do when there is only 1 line in each cell but how do you do this for cells with multiple lines? Here is an example of what I am trying to do:
A
B
C
1
First Name:
Last Name:
Address:
John
Smith
123 Harold Street
First Name: John
Last Name: Smith
Address: 123 Harold Street
I need to read or clear all the line in specific range which will be increasing dynamically. Problem is "Selected File List" table range is not specified. New file chosen with browse will be added to "Selected File List" dynamically. Number of file can't be predicted.
vbaStk.JPG
What I've tried so far is, keep track of the browse button click and add the file path to arraylist. After that, (Row number 9 which is start line + arraylist size) to get the number of line of end of the table. But due to some requirement, I want to read the file from excel file. Something like -Read until found blank line or border bottom or something.
I'm new to VBA and I'm not so sure what I'm doing with vba codes
I have this function that works on line 3 and if the conditions are met, the result is 1
=SUMPRODUCT(--(IfColor(B3,$A$76)*(SUMPRODUCT(--(D3D4)))))
Here how it works, if B3 is the same color as the reference cell $A$76 and D3 is different than D4 then the result is 1
I would like this function to work from line 3 to line 60 and return the total of lines where the conditions are met. I'm thinking of a =COUNTIF function but can't get something to work. If there is a simpler way, it's even better. The IfColor is a function I wrote in VBA,
I need the Service Order tab to populate with data from the CPR tab based on the IO#. Since there is more than 1 occurrence of an IO# I need a formula to list the 1st, 2nd, 3rd, etc result of the vlookup in the cell under the 1st.
=VLOOKUP($E$2,CPR!$L$4:$AA$12,2,FALSE),
When I drag this down I get the 1st occurrence of the IO# 777 I need all of them.
B C D
Atex ID#(unique id) Campaign name Site
Row 7 1st occurrence of IO# 777
Row 8 2nd occurrence of IO# 777
Row 9 3rd occurrence of IO# 777
I have a worksheet that I need to be able to easily copy and paste the formula/formatting from the row above, but not the Values entered, (if any). I am using columns A to DG.
I just really need to be able to copy all the formula in these cells down - nothing exciting or fancy.
I've tried formatting as a table as per some searches and that was difficult! My column headings changed, and when I inserted a row, two of the formula's wouldn't copy down - plus the shading and borders went wonky in places.
Currently I am using Excel 2000. I did a search and couldn't seem to find the answer I was looking for. Hopefully someone can help. It would be greatly appreciated since I have been trying to figure out how to do this for days.
I am trying to create a worksheet that will pull info from a row on one sheet to another sheet based on the name; then continue to list the info on each line afterward until there is no more of the that particular criteria. See below (this is just an example to simplify the data but would need the same process):
This would be the data on sheet 1:
Name Bonus Commision
Tom $45 $50
Mary $25 $75
Mary $30 $80
Tom $60 $50
Tom $90 $25
What I would like to do is have 2 more sheets. One would be Tom's sheet and the other would be Mary's sheet and it would look like this:
Tom's Sheet:
Tom $45 $50
Tom $60 $50
Tom $90 $25
Mary's Sheet:
Mary $25 $75
Mary $30 $80
I am not completely familiar with all of the functions in Excel and compared to you guys I am a complete novice.
Is this possible to do in Excel without using a macro?