Number To Equal Cell Value?
Jan 23, 2014
I currently, manually create my production work orders using excel (in-house ERP system not good enough).
Rather than manually type in the names of products to be produced, I would like to have the number 1 = a production item and 2 = another and so on.....So basically when I type 1 in a cell it will automatically display a production item.
I imagine this to be a process where i would type all the names of my production items in individual cells, then create a formula to make 1 = a specific cell, 2, 3, 4, etc.....
View 5 Replies
ADVERTISEMENT
Sep 20, 2007
If square A1 says deposit account and c1 has a figure in it, i want g1 to repeat the figure,but if a2,a3 etc says something other than deposit account i want g2,g3 to remain blank.What is the formula for square g1etc?
View 9 Replies
View Related
May 4, 2009
I am using cell V7 to input the formula but I want cell V7 to tell me if the number in U7 is greater than or equal to the individual #'s in cells U7-U40 and I would like it to put a 1,2,3 in the cells of V7-V40 for the three highest numbers in order of largest to smallest if is this possible?
View 3 Replies
View Related
Jun 29, 2008
I'm trying to count if there are situations where column a is equal to a specific number and column b is equal to another number.
both columns are numbers. Does anybody have a good idea how to do this, maybe countif, but i am not sure how to do more than one item with that.
View 9 Replies
View Related
Apr 21, 2014
I can assign a number of copies to print by adjusting ActiveWindow.SelectedSheets.PrintOut Copies:= , but what I want it to have the number of copies auto adjust to the value of a cell that contains a formula. I was hoping it would something as simple as Copies:=cell but no luck...
View 2 Replies
View Related
Dec 20, 2013
For this example, A1 is the given at 19.875 I am trying to get A2 to net a result of 19.5. A2 is to net that result by searching through cells B1:B14 and finding the nearest equal or lower number. If A1 is less than 13.5 a result of "error" should be generated in A2.
B1=13.5
B2=15.5
B3=17.5
B4=19.5
B6=21.5
[Code]...
View 5 Replies
View Related
Apr 17, 2014
How to correct my formula because it does not work?
Here the formula: =COUNTIFS(Data!C2:C24005,A17,Data!M2:M11149,"<=0")
I need to insert the formula in column C (Findings tab) which counts the rows in Column M (tab named "Data") that equal A17 (Column A in "Findings" tab) and which are less or equal zero. In addition if I drag the formula down I want to only the values be entered in highlighted in blue cells in column C (SKUs With Zero Sales in "Findings" tab) and empty cells in not highlighted cells. I attached images of these two tabs: Data and Findings.
View 5 Replies
View Related
Oct 20, 2013
I have data in cell A1 that often changes its number format(from $ to %), can i have the number format change in cell B1 whenever the number format in cell A1 changes?
View 3 Replies
View Related
Mar 10, 2014
How to recreate the formulas used in my old database. One important factor is that:
In the old database, once you type in a word, it associates it to a number, and also adds that number in a further row. how do i do this?.
EXAMPLE:
- i have the word "sitter" that = 10.25$. If i enter "sitter" in column F, it enters 10.25$ in column M.
- Likewise, i can also have the word "private" that = 13.50$. If i enter "private" in column F, it enters 13.50$ in column M.
View 3 Replies
View Related
Aug 1, 2008
I am looking to do the following:
Say I enter the following values into a spreadsheet:
5
7
4
24
32
Is there a way to enter the value "36" and have Excel find the two values of 32 and 4 which add up to 36 for me? I will obviously be dealing with much larger spreadsheets and would like to somehow save time by not having to hunt down possible combinations of the total value I'm searching for.
View 3 Replies
View Related
Dec 27, 2013
I'm looking at test results and would like to know how many times in a row correct answers were given before getting one incorrect. The way I have this currently set up, is if a student has the answer correct it returns a "TRUE" value, and a "FALSE" value for an incorrect answer. A typical test may have 50 questions, so I would have either "TRUE" or "FALSE" values in rows A1 through A50.
So I've been trying to figure out a formula that counts the number of times "TRUE" rows repeat 'consecutively' in a given column, in this scenario column A. The formula would need to check the current row and if "TRUE" check the row immediately after, if that row is also "TRUE" then check the row immediately after that, until it runs into a "FALSE" string, then display that total count of consecutive "TRUES" in another cell. I understand there may be duplicate results but I'm only really interested in the longest value, so duplicates can be ignored.
If it makes the formula easier, each possible result can be assigned to it's own cell. Let's assume the test has 50 questions. So if a student got all 50 questions correct the result count would be 50 in cell B50, or if they got 25 correct before the first incorrect answer, cell B25 would say 25, etc. I'm guessing I could then easily query this column for the largest value to come up with what I need at a glance.
View 5 Replies
View Related
Mar 17, 2014
I have the following datas as an example;
A1: %90
A2: %100
A3: %75
According to those datas I want to get the following results;
B1: On going
B2: Done
B3: On going
So basically I want to tag columns which are equal to 100% as "Done", and the rest is as " On going".
View 2 Replies
View Related
Mar 19, 2014
I have two date columns, a start date and end date. Another columns tells me the number of days between these two columns. It may return 45 days which actually straddle 3 different months.
My aim is to identify between this date range how many days in Apr 14. Then in the next column howmany days in May 14 etc
So on the spreadsheet Id have 12 columns for each month of the year. in Apr 14 for each row between the given date range I want it to tell me how many days are actually in April. Id then copy that formula into the May 14 column.
View 1 Replies
View Related
Mar 8, 2007
In my Excel spreadsheet I enter todays date in a single cell (A2), then I list various dates that jobs come into shop in other cells (A8:A108). I have cells ( F8:F108) where I have been manually entering an asterik (*) for those jobs equal to or greater than five days old in cell (A2). Is there a formula that can do the math for me? I've tried Excel help but to no avail.
View 3 Replies
View Related
Oct 23, 2012
I have a spreadsheet with two colums with dates. The names of the ranges are 'DataContractualStartDate' and 'DataContractualEndDate'.
How do I manage to count the no. of records with equal dates at the same row?
I have used the following but this gives me zero, while in the example below the result should be 3.
=COUNTIFS(DataContractualStartDate,DataContractualEndDate)
The table looks as follows:
dContractualStartDate
dContractualEndDate
01-05-2012
01-05-2012
[Code] ....
View 6 Replies
View Related
Jul 5, 2007
I'm having trouble with a small vba macro. At the end of the macro I test to see if two variables are equal and then print out true or false. However, for some reason even though the variables are equal vba is not treating them that way. I have put the values that represent the variables on a spreadsheet and used the if(x1=x2) formula and it says it is true, also, when I debug the macro and watch the values when it comes to test the logical expression the numbers are the same. I don't understand why vba does not say that the two variables are equal. I have attached a screenshot of the breakpoint where I double check the values are equal.
View 2 Replies
View Related
Feb 5, 2014
I am trying to write a macro that will make the bottom cell in a column equal to the top cell. The top cell will not always be in the same row and there won't always be the same number of cells.
View 1 Replies
View Related
Aug 16, 2007
I have a sheet in Excel 2004 for Mac that is a patient list with over 2000 patients. I need a rule that will compare values (patient IDs and responsible party ID) in two adjacent cells, if the values are different, to delete the entire row. The goal is to get rid of patients (rows) that are not the responsible party (responsible party ID).
View 3 Replies
View Related
Aug 7, 2013
I need to count the number of equal cells in col D beginning at the top of the column. The counted cells must begin with a text prefix of "Category:" without the quotes.
Some but not all of the cells in col D begin with a prefix of "Category:" without the quotes, followed by a word or words following the word "Category:" See examples below. All of the terms prefixed with "Category:" in col D are in alphabetical order. I need to count the number of identical cells in col D with the "Category:" prefix.
Examples of the contents of cells in col D with the "Category:" prefix are as follows:
Category: Adversity
Category: Answers
Category: Assurance
Category: Blessings
Category: Build
Category: Change
Category: Children
Category: Choices
Cells above and below cells with a prefix of "Category:" in col D are not adjacent.Cells above and below cells with a prefix of "Category:" in col D are separated by 3 to an undermined number of rows.
I need to count the number of equal cells in col D and insert the count in col A at the last equal term. For example, col A above would have 93, 1, 1, 5, 10, 8, 3, and 12 inserted into col A.
View 9 Replies
View Related
Jul 15, 2009
I have two cells, both of which have drop down lists for options 'a' & 'b'. When one equals 'a' the other should be restricted into only saying 'b' and vice versa. I would also like the user to be reminded that he can only select 'a' once from the two menus. Ideally I would like to do this in a formula rather than VBA?
View 2 Replies
View Related
Dec 18, 2012
Simply need a cell to count another cell is equal to certain value.
For example if B3 has a value of 6 then I need J3 to equal 1 or if B3 is equal to 3 than I need G3 to equal one. I tried the the COUNTIF but I am sure i am using it incorrectly.
View 1 Replies
View Related
Nov 5, 2013
I would like to create a VBA code where it will delete the entire column if the cell value is equal to value in D2
For example:
Sub Delete_Columns()
Dim rng As Range, cell As Range, del As Range
Set rng = Intersect(Range("G2:S43"), ActiveSheet.UsedRange)
For Each cell In rng
If (cell.Value) = D2 _
Then
If del Is Nothing Then
Set del = cell
Else: Set del = Union(del, cell)
End If
End If
Next cell
On Error Resume Next
del.EntireColumn.Delete
End Sub
======
But I think this line is wrong but I am not sure how to fix it - If (cell.Value) = D2 _
View 5 Replies
View Related
May 18, 2014
I have a spreadsheet with some cells which return values using INDEX and MATCH to bring back the entire details of a person based on there membership number. However I require the comments to be attached with the returned values. The comments have there image in, rather than just text.
I have found some answers with vba, which do the process, however you had to manually enter the cell, from which the comment was to be copied from, into a pop up box. This involved finding the box myself to then select the box to take the comment from. In doing this I had found and read the comment, which is the is the process I'm trying to bypass.
View 8 Replies
View Related
Nov 22, 2009
I've been pounding away at a project for two days trying to determine a way to identify a solution, to no avail.
Here is some experimental code. Under the assumption that in Column "A", every fifth line contains some text (a, b, c, etc) I want to place a function in column B that would identify the closest occupied cell above and to the left of the cell containing the function. The sub achieves this, but the function has a problem because of the Activecell line. Is there a way to identify the location of the cell containing the function to act as a reference point for the range?
Sub find_last_heading()
Application.ScreenUpdating = False
x = ActiveCell.Address
ActiveCell.Offset(0, -1).Select
last_heading = ActiveCell.Text
Do Until last_heading ""
ActiveCell.Offset(-1, 0).Select
last_heading = ActiveCell.Text
Loop
MsgBox last_heading
Range(x).Select
End Sub
Function cathead(Optional reference)
Dim cell
View 9 Replies
View Related
Apr 26, 2006
I need to identify rows where the contents of a given cell are equivalent to the cell below. I have managed to get this working based on iterating through the cells and selecting them both for cutting.
However it doesn't work effectively: It seems to be leaving blank lines in the original sheet and further fails after the first execution. I would be grateful for any suggestions on a good method to perform the following operations:
(1)to compare the cell with the cell below
I have used
If cell = cell.Offset(1, 0) Then
(2)to act on the rows for the two connected rows
Sub Test4()
' Loop through rows
Dim TheExtract As String
Dim cell As Range
'Application. ScreenUpdating = False
For Each cell In Worksheets("Sheet 1"). _
Range("A1", Worksheets("Sheet 1").Range("A65536").End(xlUp))
TheExtract = cell
If cell = cell.Offset(1, 0) Then
cell.Rows("1:2").EntireRow.Select
Selection.Cut
Sheets("Test").Select
ActiveCell.Offset(3, 0).Rows("1:1").EntireRow.Select
Selection.Insert Shift:=xlDown
End If
Next cell
'Application.ScreenUpdating = True
End Sub
View 3 Replies
View Related
Jul 24, 2014
I would like to program an Input Box that looks at the cell next to it to see if there is a value equal to zero in it. If there is a Zero in the cell an Input Box will popup and ask "what was the result". It would keep going down the column until there are no more values in column A.
In this example the Input Box would popup for the second line and the third line and then populate the values entered into C2 and C3 accordingly.
Ex
Col A Col B Col C
1 1 52
2 0
3 0
View 2 Replies
View Related
Jan 18, 2008
I have 2 worksheets, and I was wondering if I can have a cell from Sheet2 equal to the subtotal of the Autofilter criteria of a column in Sheet1.
I do have something working with macros but it takes a long time. This would make things a lot easier.
View 9 Replies
View Related
Oct 24, 2013
I am trying to write a macro which will hide and show row 15 based on the value which gets input into E9.
Part 1 here is working and when E9 = "DP Deliverable" row 15 does appear, but on the converse, when I input something besided DP Deliverable into E9, row 15 does not hude.
Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Address = "$E$9" Then
If Range("E9").Value = "DP Deliverable" Then
Call Show_DP
If Target.Address = "$E$9" Then
If Range("E9").Value "DP Deliverable" Then
Call Hide_DP
End If
End If
End Sub
View 4 Replies
View Related
Dec 27, 2006
if a certain cell does not equal zero i want a macro to run. But i'm having trouble getting the logic right. here's what i have so far
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
Range("u82").Select
If Active.Selection 0 Then
Call unhide_addABBR
ElseIf Active.Select = 0 Then
Call hide_addABBR
end sub
View 9 Replies
View Related
Feb 28, 2007
The code below is an attempt to delete all rows where the cell in column A is not equal to the value of B1. B1 is text if that somehow makes a difference.
Dim n As Long, lastrow As Long
lastrow = Range("A65536").End(xlUp).Row
For n = lastrow To 1 Step -1
If Cells(n, 1) <> Range("B1") Then Cells(n, 1).EntireRow.Delete
Next n
Do I need to specify that B1 will always be the cell to reference (ie $B$1). Edit: Just had an epiphany, I also need it to stop after Row 3. I have some headers and such that I don't want removed.
View 2 Replies
View Related
