I now have 1 workbook with 3 worksheets. Each of the worksheets has a list of clients (currently about 130) and then several years worth of data. For each work sheet the first 4 columns are identical (last name, first name, med record number, DOB) and then a different set of longitudinal data.
I need to be able to add new clients and their basic demographic info and have the names show up on all the worksheets in the same alphabetical order. I could then add the data on the appropriate worksheet as collected.
I can send the workbook if you need it, but would first need to remove all identifiable information.
I'm making a Excel list for trading cards (MTG) and I've divided it into different worksheets in order to sort it by the color of the cards (not really important I guess).
The issue I have is that I want it to copy certain columns (in this case C3:C1000, F3:F1000, G3:1000 ) from almost all of the worksheets into a new worksheet where it should paste them into column A, B and C.
In two of the worksheets it's also different (C3:C1000 , G3:G:1000, H3:H1000).
I've seen many where you copy one range from multiple worksheets, and that would've been okay I guess if not those two worksheets were different. I'd prefer not to change them, and I'd also prefer if I could've gotten just the information I needed also. Is this possible to do?
This code splits a worksheet into multiple sheets (based on sales person in column A). But when it does it, it deletes the sheets and then re-creates them.
However this messes with my formulas I have linked to the split sheets and turns them into #REF! errors.
I would like to split a worksheet to multiple sheets based on a column header. On browsing through the forums I found the VBA code below.
My problem with is that the code automatically uses only the first column for spiliting into different sheets. But I would like to modify this so that it searches the first row for a matching header specified by me (Eg "Name" , which may be column 10)
Code: Private Sub PagesByDescription() Dim rRange As Range, rCell As Range[code]....
I have a worksheet that has data in columns A to N. The Salesman’s number is in column A and I need to split this first worksheet in to separate worksheets in the same workbook for each salesman.
I have a single worksheet containing information related to cellular charges for our company. One of the columns is titled GL Dept, and I need to separate the spreadsheet out into multiple sheets. Each sheet needs to have only the rows for each unique department so they can be distributed to each department head.
I have about 50 tabs one for each city and i need to update information everyday for each of those cities. I now what the macro to update all the new entries in each of the worksheets into a consolidated Summary sheet. This is dynamic so if 10 rows are filled in the summary tab and if i update the rows in the individual city worksheets the summary tab should paste values from the 11th row and so on
I have a single worksheet containing data in columns A-J. I need to Copy all cells to a new work sheet when the value in column A changes. The worksheet should be named the value of column A. I have found thread 656226, but am unable to modify to work.
I have four worksheets that all contain the same header row in row 1, but different data in the data rows. I would like to combine all the data from each of the 4 worksheets into a new (created by code) worksheet named "WS Combine". The worksheet named "Result I want 01" simulates exactly what I want the "WS Combine" worksheet to look like. Can this be done?
The header row, however, only needs to be brought over once (with all formatting intact; ie header pane frozen, yellow, centered & bold).
The Worksheet named "Result I want 02" simulates the second thing I would like to do. This worksheet basically looks at "Result I want 01" and copies ONLY the rows that are RED and BOLD and pastes these rows (along with the header row). This worksheet could be named "Red Totals"
A couple of nuances...
1. The rows that are RED and BOLD in the four original worksheets are not always in the same position. That's because they don't currently populate that way so I wanted to make this as real as possible. Therefore, ideally, code that says "just copy all data from four worksheets" would not be sufficient.
If it's not possible or too involved to have the worksheet named "Result I want 01" reorder the rows this way when copying them over, then having them in any order is fine.
2. I need to keep the font formatting of ALL the rows intact as future code will not work without this formatting retained on the two new worksheets.
3. It is possible that duplicate rows can be created (two worksheets have the same exact data) when combining these four worksheets into one. If this is the case, then either allow that to happen or simply delete the duplicate row, whichever is easier.
I am trying to do is have a worksheet that gets its information from other worksheets within the same workbook. Some of the worksheets that it gets its data from are web queries, and as such change on occasion (columns stay the same but rows get inserted or deleted as data on the web page that it is importing changes). Also due to this being an import I can not change directly the format that comes onto the sheets (ig split into different columns etc). Much easier described within the example as I am not sure of the words to best describe the end result I am looking for. A copy of a smaller version of what I am doing is attached
I would like a formula to lookup a value across worksheets and if found return the worksheet name that coresponds to that value. I do have this formula below but it will not retrive the correct worksheet name if there are duplcates values.
So I tried to use the define names formula method:
Col_B =N(INDIRECT("'"&XWSLST&"'!B"&(2+MOD(S,N)))) N =8 S =ROW(INDIRECT("1:"&(N*ROWS(WSLST))))-1 WSLST =Sheet1!$A$2:$A$3 XWSLST =T(OFFSET(WSLST,INT(S/N),0,1,1))
and modified the formula into this manner: =INDEX(WSLST,MATCH(TRUE,COUNTIF(Col_B,B2=S)>0,0),COUNTIF(B$2:B2,B2))+1
I left a sample workbook below that in column E are the values that I'm expecting.
I have a different worksheet in the same workbook for every "gig" that I book. Each gig contains the name of the musicians I staffed on the gig along with their salary+expenses For taxes, I need to summarize into a new worksheet how much each musician made. Ideally i'd see not only the total per name but itemized. So if 1 guy did 3 diff gigs, I'd see each row pertaining to his name.
Lastly, I'd like to include names that do not have multiple records because it's possible there is inconsistencies with the spelling of certain names.
I have Folder with almost 21 or 22 Excel files depending on the working days in a month,
All I am trying to do is to run a Macro so that Column C and D from Sheet Name "Resource Count" from all Workbooks of Different Names from all the files from that folder to be copied and pasted to a new Workbook one after the other in new workbook.
To clarify, Each workbook in that folder will have a sheet named "Resource Count" and I want to copy Column C and Column D from all the workbooks from the folder and paste one after other in a new work book.
I need a code that will copy any cells with data in range I3:I41 from sheet2 and paste it in sheet1 starting at cell B3. Then copy any cells with data in range I3:I41 from sheet3 and paste it in sheet1 starting at the next empty cell.
I have a workbook with multiple worksheets. Each worksheet is a set o data from a certain year. I want to create a macro that automatically copies the data from these worksheets into a master worksheet that can easily be used to make a pivot table.
I have a workbook with 33 worksheets (31 date tabs and a Month To Date and Year To Date tab)
I want to have a clickable cell on each of the 1-31 date tabs to point to the MTD
I know I could do this easily with a hyperlink but I would rather have a clickable cell.
I have achieved this on an individual worksheet using the following code
Code: Private Sub Worksheet_SelectionChange(ByVal Target As Excel.Range) If Not Intersect(Target, Range("$R$3")) Is Nothing Then Sheets("MTD").Select End Sub
My question is: Do I have to copy this to every single worksheets code or is there some way have all sheets read the same private sub? (I guess it negates the point of a "private sub")
Way to do this as it would make editing any changes easier than having to do it 31 times.
I have a work book with prob close to a thousand individual work sheets in it. I have a goup of cells that are the same in ever work sheet that I would like to pull and place into a master work sheet. I dont want to copy and paste each one, I'd be a hundred before I finished and I dont have that kind of time. Im thinking a macro might be what I need but Im not very good with useing them let alone making one to fit me needs.
I wanted to see if it were possible to combine multiple worksheets into one new worksheet, but without duplicating columns with the same heading, enabling the data to fall into the correct column if it's shared in multiple worksheets, and adding columns if their unique. Furthermore, if there are a few "leading" columns, i.e. ones that are shared in every sheet and never move from where they are, to include those as the leading columns in the new sheet. I'm unable to post an attachment, but I'll try to paint a picture. This is on a much smaller scale than intended, but I want to combine Sheet 1 and Sheet 2 to form Sheet 3 (which I've manually copied to look how I would want it to look if the formula/code works properly). Columns A, B, and C are the "leading" columns I was referencing, whereas any of the following columns may or may not be shared in the various worksheets, but should still be included and combined if they're the same. There also might be a different number of columns depending on the sheet. I consider myself somewhat of an intermediate user, and I am familiar with using VBA codes for formulas should that be the proper remedy.
I am building a workbook for small group of people in my office to use. I have 7 tabs, the first one is called Main Sheet and the other tabs are the names of each person using the excel workbook. Every tab looks the same, I have the columns labeled: date - job number - job name - contact # - comments
My desire is that each person will be able to input their data on their tab as they receive new jobs, and the main sheet will be a compilation of everyone's sheet. So to clarify, as new information is added to one tab this entire row of information will automatically be added to the next available spot on the main sheet. We are all on the same server so we can all work off the same file. Is this possible to accomplish?
[URL] to append summary data within several workbooks. But suddenly, it works for some workbooks, but for some others, it just captures the data for the very last WS.
I worked on a workbook which has multiple worksheets( mine has 6). The data doesn't start from A1. I want to copy the data from each worksheet into a sheet called summary. I want to create the macro that would only copy the heading row once.
i need a macro which copy and paste from multiple worksheets (except for 3 worksheets which is named after Jan, Feb and Mar) into one worksheets (named as OVERALL). The data to copy will cover from cell A1:D1 and below where there is data available.
I know there are many ways to create an "All Data" worksheet. Copy & Paste is the most obvious or pasting named ranges into the new worksheet. I have a workbook with 48 tabs with up to 1000 rows of data per sheet. I need to merge each tab into one main "All Data" worksheet.
How to combine these 48 sheets in an easier way than the two options I already know (Copy/Past or Paste Named Range). Any Add-In's to Excel that can possibly do this? I am using Excel 2010.
How to make this "All Data" worksheet combining data from each sheet of the 48 tabs would be most useful.
I have been searching the boards long and hard for this solution and have yet to find that applies fully. Every day I need to search through 20 worksheets for transactions occurring on a specific date and copy the row onto a new worksheet. I would like to run a macro that would allow me to search for a specific transaction date in column C of each worksheet and if the date matches it will copy the entire row to a new worksheet.
The issue I am having is that the transaction lists are a running sum of all the transactions for each account. Therefore, the range that the macro needs to search will change daily as well. Furthermore, the date that I would be searching for could potentially appear in column A or B but I only want the row if the date matches that of column C. Also, on some sheets there may not be a transaction at all.
I have one master worksheet named "Season" and 30 other worksheets named "1,2,3,4 and so on to 30". I ideally want to copy the shapes (msoShapeOval) from the worksheets- "1-30" to worksheet- "Season". When the shapes (msoShapeOval) are copied from worksheets "1-30"
I want them to keep thier position that they were in when copied to worksheet- "Season".
The shapes (msoShapeOval) are in range "A1:AZ43" in worksheets "1-30" and would be placed in worksheet "Season" range "A1:AZ43"
I am searching for a formula or simple macro to select text data from column named "SM NAME" to corresponding worksheet. I need this to populate as many worksheets as there are SM Names. ( there are usually 10 SMs)
For Example in the Master Data there are Several SM names listed. I need to extract the "ID" and "Agent" columns in the Master and populate into the workshhet with the Approriate name tab. The Master list changes regularly.
I have several exel workbooks (.xls files) and each workbook contains multiple worksheets. The number of worksheets and their names are variable. Each worksheet is formated in the same way. Now I want to copy an specific cell range on each worksheet and copy it into a single worksheet.
For example let assume that we have a a workbook called temperature.xls. This file contains 4 worksheets named: 40-1, 40-3, 40-5#, and 40-22. I want to copy a specific cell range (F46:O47) from all the worksheets in the workbook temperature.xls and paste only the values on a summary worksheet. This summary worksheet can be in the same workbook or in different one. I just wanted to add that I want to repeat this process 15 more times to summarize all my data containing workbooks. On average each workbook contains 35 worksheets so it is a tedious manual process.
