Combining Parts Of Multiple Worksheets Onto Worksheet
May 12, 2006
I am trying to do is have a worksheet that gets its information from other worksheets within the same workbook. Some of the worksheets that it gets its data from are web queries, and as such change on occasion (columns stay the same but rows get inserted or deleted as data on the web page that it is importing changes). Also due to this being an import I can not change directly the format that comes onto the sheets (ig split into different columns etc). Much easier described within the example as I am not sure of the words to best describe the end result I am looking for. A copy of a smaller version of what I am doing is attached
I have a set of related variables that are split over multiple worksheets, and I need to be able to take specific information, duplicate certain values and produce an output sheet for use in a separate piece of software.
The variables are: Position Number (Sheet 1) Position Title (Sheets 1 and 2) Position Requirement (Sheet 2) Requirement Importance (Sheet 2)
The output sheet requires a list of all the requirements for each position number, which means the position number itself needs duplicating (in new rows) X number of times, where X is the number of requirements assigned. The appropriate requirements are then to be pasted in next to each position number (and the requirements can be found by comparing position number to title, and from title to requirements).
Normally, Iíd be able to do this using lookups and so forth, but my problem arises when I have multiple position numbers with the same related title (in the attached example, there are three plumbers with unique position numbers). I canít figure out how to say to Excel ďa plumber has five requirements, and there are three plumbers, so duplicate each position number for each plumber five times, then insert the appropriate qualifications (and their associated importance values) next to the position numbersĒ.
I'm currently doing a survey using an excel workbook that contains multiple questions across multiple worksheets using radio buttons linked to certain cells.
I have around 400 workbooks coming back to me, so what i want to do is take specific values from across many worksheets within each workbook and combine them into a large master table in a seperate workbook.
I've tried using VBA, but not being very proficient at it i've hit a brick wall with that, so i'm hoping that there is an easier way to do it than what i'm currently pursuing.
I'm trying to consolidate data from different worksheets that has the worksheet name consisting of "Pg*" into a summary sheet. The problem is it does not loop through every sheet and only extracts data from the active sheet.
Code: For Each ws In ThisWorkbook.Worksheets If ws.Name Like "Pg*" Then Set CopyRng = ws.Range("A2:G68")
I have a spreadsheet with 2 worksheets. On the first "active parts" I have a list of active part numbers and on the second "All Parts" I have all of the parts available.
I want to compare every part in the All Parts worksheet to see if the part number exists on the Active Parts sheet - if it's there, I would like it to return the value "Active" in column B in All Parts. I have a formula in column B in All Parts that seems to work for the first few, but as soon as it finds one that is active, the rest of the cells below all return "Active".
I'm trying to create a macro to merge multiple rows into one cell and display in a new worksheet.
This seems really simple but I've tried to re-work some other examples I've found online but none seem to do exactly what I need. I'm also pretty new to VBA , so it's highly possible i've missed something.
I need to display each set of Notes for each DonorNo in one row - with each note separated by a space.
I've attached a sample of the data and what I need for the output. In the actually file I have around 70,000 records so the prospect manually merging the rows is horrifying.
This is a sample of what I am trying to accomplish (file attached). I have information in one worksheet (called MasterList) and a second worksheet called (RecordList). I want to take information from MasterList and RecordList and combine them to produce a report (Results). Assume the user does not have access to MasterList or Results.
The user would enter the UID in RecordList, which then populates information from MasterList. There can be multiple entries for each UID and there is no set number of entries (could be 1, could be 500)
The user enters the UID into RecordList, which populates information from MasterList. The user then adds in the additional information into the fields.
What I want is all the information from the Master List must be reported whether anything exists in RecordList or not. If there is information in the RecordList, display it and on a seperate line for each entry. Each UID then needs to be totalled (which can be done through pivot table later).
I have five excel separate excel files containing values covering more than 500,000 rows each. I want to put then in a single excel workbook without tedious work of copy/paste to sheets of this workbook.
I have the below macro which is failing to insert text into A1 of the Header Sheet, followed by the values in the designated cells that are from Sheet1. I would also like to have the values in cells J2 and K2 enclosed in single quotes.
Sub Header() Worksheets("Header").Activate ActiveSheet.Cells(1, 1).Select ActiveCell.Value = "create or replace" & " '" & Sheet1.Range("J2").Cell.Value & "' " & " '" Sheet1.Range("K2").Cell.Value & "' " End Sub
how do I get it into the nicely formatted version most of you are using? The Mr Excel HTML add-in?
what i want to do is 1 have a workbook with 3 worksheets. Sheet1 contains the columns:
Reference No. Line Item No. Amount Date 1 3 500 12/01 2 4 900 01/01 Sheet2:
Reference No. Line Item No. Quantity PersonInCharge 1 3 10 Kim 5 6 60 Noel
For sheet 3, what i want to happen is that when i run the VBA macro, it searches through both worksheets (Sheet1 and Sheet2), finding rows that have matching Reference No. AND Line Item No. and combine all of the columns (and values) for that particular row into another row in Sheet 3. So for the above data set, the resulting data in Sheet 3 would be:
Reference No. Line Item No. Amount Date Quanity PersonInCharge 1 3 500 12/01 10 Kim
As this is the only entry in both sheet1 and sheet2 where there is a matching reference and line item no.
I'm making a Excel list for trading cards (MTG) and I've divided it into different worksheets in order to sort it by the color of the cards (not really important I guess).
The issue I have is that I want it to copy certain columns (in this case C3:C1000, F3:F1000, G3:1000 ) from almost all of the worksheets into a new worksheet where it should paste them into column A, B and C.
In two of the worksheets it's also different (C3:C1000 , G3:G:1000, H3:H1000).
I've seen many where you copy one range from multiple worksheets, and that would've been okay I guess if not those two worksheets were different. I'd prefer not to change them, and I'd also prefer if I could've gotten just the information I needed also. Is this possible to do?
First, ignore the colored portions. This is how I kept track of what I had completed in the form as I created it. Clients attend class once a week and would be marked present on the corresponding day of class. This increases column #3 "classes attended" to "1". What I would like is for my individual classes sheet to reset every Monday (as the date of the report on top) but for the "5groups" worksheet to keep count of the classes attended. Does that make sense? Please, any imput would REALLY be appreciated.
I now have 1 workbook with 3 worksheets. Each of the worksheets has a list of clients (currently about 130) and then several years worth of data. For each work sheet the first 4 columns are identical (last name, first name, med record number, DOB) and then a different set of longitudinal data.
I need to be able to add new clients and their basic demographic info and have the names show up on all the worksheets in the same alphabetical order. I could then add the data on the appropriate worksheet as collected.
I can send the workbook if you need it, but would first need to remove all identifiable information.
I have a document needed to be printed with some pages in the middle in landscape page type, the rest in portrait. If using Word it would be easier, but in Excel I cant find the section break to chage page setup separately. Is there anyway to do it. Currently I'm printing the document separately in portrait and then landscape with some page break added and page number modified. However it's quite troublesome and easy to make mistake.
I would like to split a worksheet to multiple sheets based on a column header. On browsing through the forums I found the VBA code below.
My problem with is that the code automatically uses only the first column for spiliting into different sheets. But I would like to modify this so that it searches the first row for a matching header specified by me (Eg "Name" , which may be column 10)
Code: Private Sub PagesByDescription() Dim rRange As Range, rCell As Range[code]....
I have a single worksheet containing information related to cellular charges for our company. One of the columns is titled GL Dept, and I need to separate the spreadsheet out into multiple sheets. Each sheet needs to have only the rows for each unique department so they can be distributed to each department head.
I have about 50 tabs one for each city and i need to update information everyday for each of those cities. I now what the macro to update all the new entries in each of the worksheets into a consolidated Summary sheet. This is dynamic so if 10 rows are filled in the summary tab and if i update the rows in the individual city worksheets the summary tab should paste values from the 11th row and so on
I have a single worksheet containing data in columns A-J. I need to Copy all cells to a new work sheet when the value in column A changes. The worksheet should be named the value of column A. I have found thread 656226, but am unable to modify to work.
I have four worksheets that all contain the same header row in row 1, but different data in the data rows. I would like to combine all the data from each of the 4 worksheets into a new (created by code) worksheet named "WS Combine". The worksheet named "Result I want 01" simulates exactly what I want the "WS Combine" worksheet to look like. Can this be done?
The header row, however, only needs to be brought over once (with all formatting intact; ie header pane frozen, yellow, centered & bold).
The Worksheet named "Result I want 02" simulates the second thing I would like to do. This worksheet basically looks at "Result I want 01" and copies ONLY the rows that are RED and BOLD and pastes these rows (along with the header row). This worksheet could be named "Red Totals"
A couple of nuances...
1. The rows that are RED and BOLD in the four original worksheets are not always in the same position. That's because they don't currently populate that way so I wanted to make this as real as possible. Therefore, ideally, code that says "just copy all data from four worksheets" would not be sufficient.
If it's not possible or too involved to have the worksheet named "Result I want 01" reorder the rows this way when copying them over, then having them in any order is fine.
2. I need to keep the font formatting of ALL the rows intact as future code will not work without this formatting retained on the two new worksheets.
3. It is possible that duplicate rows can be created (two worksheets have the same exact data) when combining these four worksheets into one. If this is the case, then either allow that to happen or simply delete the duplicate row, whichever is easier.
I would like a formula to lookup a value across worksheets and if found return the worksheet name that coresponds to that value. I do have this formula below but it will not retrive the correct worksheet name if there are duplcates values.
I have a different worksheet in the same workbook for every "gig" that I book. Each gig contains the name of the musicians I staffed on the gig along with their salary+expenses For taxes, I need to summarize into a new worksheet how much each musician made. Ideally i'd see not only the total per name but itemized. So if 1 guy did 3 diff gigs, I'd see each row pertaining to his name.
Lastly, I'd like to include names that do not have multiple records because it's possible there is inconsistencies with the spelling of certain names.
I have Folder with almost 21 or 22 Excel files depending on the working days in a month,
All I am trying to do is to run a Macro so that Column C and D from Sheet Name "Resource Count" from all Workbooks of Different Names from all the files from that folder to be copied and pasted to a new Workbook one after the other in new workbook.
To clarify, Each workbook in that folder will have a sheet named "Resource Count" and I want to copy Column C and Column D from all the workbooks from the folder and paste one after other in a new work book.
I need a code that will copy any cells with data in range I3:I41 from sheet2 and paste it in sheet1 starting at cell B3. Then copy any cells with data in range I3:I41 from sheet3 and paste it in sheet1 starting at the next empty cell.