I want to use the little dot in down right corner of the cell to copy the cell content and the formula correctly.
But now the problem: every time I use it also copies the cell formation.... Is there a way that it only copies the content, but not the formation?
I have a value in a cell in Sheet2 (in this case its price per ft), on sheet1 is where I would input the number of feet. So can I multiply from data in cell on Sheet2 from cell on Sheet1and if so....
View 6 Replies View RelatedCan I get a formula for the below specification.
if a cell contains character A THEN multiply by cell B * 0.02,if a cell contains character B THEN multiply by cell B * 0.05,if a cell contains character C THEN multiply by cell B * 0.010
I have a row where C5 is the total of C1:C4. What I am trying to do is if C1 or C2 or C3 or C4 has a number value that I can multiply the cell in question by 2 and then add up all of the cells to give a total in C5. Also, I have a name in A1, but when I select E1 and enter =A1 into the cell then return, I get A1 in the cell instead of the name in A1.
View 5 Replies View RelatedI need a VBA macro to multiply column E and F and deposit the result in column G. The multiplication should only happen when there is a value in the column E. If there is no value in the column E, then the cell in the G column should stay blank.
View 9 Replies View RelatedAll to occur in cell G2
Condition 1.
If F2 is > 0 then multiply F2 by D2.
Condition 2 in the same cell.
If the product of F2 multiplied by D2 is > E2 AND the sum of F2 and F1
multiplied by D2 is > 0, then add the product of D2 multiplied by the sum of
F1 and F2 to E2, otherwise input E2
Condition 3 in the same cell.
If the product of F2 multiplied D2 is < E2 BUT the sum of F2 and F1
multiplied by D2 is > 0, then input the product of D2 multiplied by the sum
of F1 and F2.
Condition 4 in the same cell.
If F2 < 0, and the sum of sum of F2 and F1 multiplied by D2 is < 0, then 0.
This is the best way I could think of the write out my intention. I think if
I can get the above scenario into a one cell formula that should resolve my
pain.
After formating I need to multiply by 2 . As you can see my Cells.Value = Selection.Value * 2 is not correct. How can I accomplish this?
With Range("I17:I4000", Range("I" & Rows.Count).End(xlUp)).Offset(, 1)
.Formula = "=ReplaceChar(I17)"
.Value = .Value
Selection.NumberFormat = "0.00"
Cells.Value = Selection.Value * 2
End With
I'm trying to make a sheet to calculate my taxes. I would like to keep tax rates from previous year(s), and have them applied based on which year I input in a cell..
Let say that in cell B1 I write year 2013
In cell G1 I have year 2013 and in cells G2:G7 I have tax rates from year 2013.
In cell H1 I have year 2014 and in cells H2:H7 tax rates from year 2014
In cell B17 to B20 I would like to make a formula that multiplies cell B11 or B12 with information found in either column G or H based on input in B1.
I have attached a spread sheet as example.
I know I can make a formula based on IF(B1=2013;G*;IF(B2=2014;H*;etc..
I am looking for formula , single cell two numerical values , multiply in different columns
example :
Cell (A1) contain: =350,23+25,59 (two values in a single cell)
request:
in (B2) only first value so 350,23 multiply (x) by fixed number &in (C2) only second value so 25,59 multiply (x) by fixed number
=IF(OR(A1>0,A2>0,A3>0),*2,"")
if A1,A2orA3 is greater than 0 then multpy by 2 or leave the cell blank
How can i format a column of cells so that if a number is less than 10 for eg that that particular cell is then multiplied by 1000.
View 9 Replies View RelatedCell A1 = 3
Cell A2 = 4
Is there a formula to calculate
(3*4)+(2*4)+(1*4)
I need to multiply every integer less than the number in cell A1 and greater than zero by the number cell in A2. I was thinking factorial, but that's not it... Can't remember from my math days.
I am trying to multiply a range of cells by a cell reference. The cells currently have hard coded values in them. I know with past special you can multiply a range of cells by a copied #. I want a similar function to that just instead of a copied cell its a cell reference. No VBA.
View 5 Replies View RelatedI have some data in cells C5:G50
I can then enter some data in cells C4, D4, E4, F4, G4
What i want now to happen is when the value in C4 matches a value
anywhere in C5:G50 then i want that cell to have green background etc.
I have found this code but it does not seem to work
Private Sub Worksheet_Change(ByVal Target As Range)
Dim icolor As Integer
Dim c As Range
If Not Intersect(Target, Range("C5:G50")) Is Nothing Then
For Each c In Intersect(Target, Range("C5:G50"))
Select Case c
Case Is = "C4"
icolor = 5
Case Is = "D4"
icolor = 5
Case Is = "E4"
icolor = 5
Case Is = "F4"
icolor = 5
Case Is = "G4"
icolor = 5
Case Else
icolor = xlNone
End Select
Intersect(Rows(c.Row), Range("C:C,D:D,E:E,F:F,G:G")).Interior.ColorIndex = icolor
Next c
End If
End Sub
Excel (2000), what formula would I use to accomplish the following?
If A1 equal or less than 1000 value, multiply by B1, otherwise multiply by C1.
How can I multiply let's say A1 to 10 if B1 = 5
or multiply next cell like A2 to 15 if B2 = 10
I have a field where the month is written as text. I would like to highlight row whose month column has passed. My conditional formating code is:
View 4 Replies View RelatedI am trying to create a floating bridge bar chart.
Here is my data and I will try to describe as accurately as I can.
FY 2004 operating margin = 14.6% (while FY 2005 and FY 2006 = 11.2% => So the difference is 340bps)
The "bridge" back to 14.6% = 90 basis points for Jimmy'Z, 30 basis points for stock option expense, 30 bps for marketing -- that's 150 bps of the 340 and I'm trying to quantify the rest of the bridge but is there a way to show this in excel with floating bars - that is to say the 14.6% bar will touch the axis but the other 3 data points are not touching the X axis but are in the air in a step formation... ?
I have a macro that copies all my sheets onto a new sheet called combine. It is pasting onto the combine sheet starting on cell A2 instead of cell A1. Following is my macro.
Sub Combine()
Dim J As Integer
Sheets(1).Select
Worksheets.Add
Sheets(1).Name = "Combined"
On Error Resume Next
For J = 2 To Sheets.Count
Sheets(J).Activate
Range("A1").Select
Selection.CurrentRegion.Select
Selection.Copy Destination:=Sheets("Combined").Cells(Rows.Count, 1).End(xlUp)(2)
Next
End Sub
I'm having a column called "Body". Each cell in this column contains a huge amount of text. I want to select automatically certain values from that text and copy them into other cells. This image will explain what i mean:
I tried to work with the function MID but that doesn't work because the values don't have a fixed position. They don't start always at the same character number.
I have run an INDEX and MATCH formula to give me a resultant cell reference number. I now want to copy a cell to this specific cell reference using another formula.
For example the data I want to copy is in cell A1 and in cell A2 I have the result of the index formula (B1).
I know how to manually do a formula for this but wanting to know if there is a uniform formula that I can use that looks at the formula result of cell A2.
123569LOC23 is in one cell and I am trying to copy the "LOC23" to a new cell. However, the amount of digits vary: LOC23, LOC1,LOC15 etc all the way down the column.
Basically I have a filtered list in colunms A to D. The user selects a cell in column A and I want to then be able to run a macro which copies that cell and the adjacent one in column B, into columns A and B on sheet2.
The complications are
Column B on the second sheet is merged with columns D to E so a straight forward cut and paste of A and B on sheet 1 into A and B on sheet 2 will not work in one cut and paste as it complains about merged cells. It would need to copy and paste A and then copy and paste B to avoid the error.
The row on sheet 2 where it is being pasted needs to be the first row between row 10 and row 30 where col A is blank (so it doesnt overwrite a previous copy and paste as they are basically creating a list on sheet 2 in those rows by runing this macro repeatedly). if there is no blank row then it should insert a new row at row 10 and paste into that
I'm trying to build a macro that copies the information from cell D2 and then special pastes it into the next free cell on that specific row (as the information is from a vlookup so don't want to paste the formula) - ideally I'd like it to paste from H2 onwards but can move the spreadsheet around if that's not possible! I'd then like to do this for every row until there is no data in a row.
I've been using the below which I've found on the internet but this only pastes into column H and then just goes down the column rather than across the row, and I can't figure out how to do this.
Sub Summarize()
Range("D2:D25").Select
Selection.Copy
Sheets("Pot 2").Select
lMaxRows = Cells(Rows.Count, "H").End(xlUp).Row
Range("H" & lMaxRows + 1).Select
Selection.PasteSpecial Paste:=xlValues, Operation:=xlNone, SkipBlanks:= _
False, Transpose:=False
Range("D25").Select
End Sub
I have just generated a report of current customer numbers for our company. Unfortunately it reports it as "162 (162)". No idea why the program does it like that because it now makes using VLOOKUP very difficult.
What I want to do is copy the "162" part of the cell and paste it into the adjacent cell to make it easier to manipulate the worksheet. All of the customer numbers are in column D if that makes a difference.
Please see the attached sheet. I have columns B through a lot (B through O in my oversimplified example). In every 7th row in each of these columns there is either a 1 or a blank/zero. I need to multiply that 7th number by the Quantity in column A, to achieve a total (ie the sum of each result of 7th cell*quantity) for each column in the bottom row, labeled "Totals".
In the actual version of my sheet, there are far too many rows to select everything manually. I've been fiddling with combinations of COUNTIF/COUNTA and OFFSET, but I haven't come up with a way to check for the 1 in every 7th row, THEN multiply that 1 by the quantity in column A, THEN add up the results for each column. As you can see, there are 1's elsewhere in the columns that are irrelevant to this particular calculation, so something like LOOKUP would also have to look in every 7th cell and couldn't just look at the column as a whole.
If you can't provide an immediate solution, but can at least point me to a resource that would allow me to devise a way to isolate every 7th row (THAT part is the sticking point), I'll surely post the solution to my own thread with updated keywords if I need it.
1. stores the selected range. I call this range as First Range.
2. Asks for a target cell location.
3. At the target location, it selects a range of the size same as that of First.
I call this range Second Range.
4. Copies the formulae of cells in First Range, to the corresponding cells in Second Range.
I am stuck at the step 4. I don't know how to copy contents between corresponding cells. For example, I don't know how to copy the formula of cell(1,1) in First Range to cell (1,1) of Second Range.
Is anyone able to see where i went wrong, i am tring to make a function sumproduct using dynamic ranges. i can do the same thing using arrays which is simple(below), but not using ranges, below. the range is dependent on a the number of selected choices, hence the ubound.
View 8 Replies View RelatedI wish to Automatically copy the TEXT that is written from Spreadsheet 1 cells D5 to F5 to Spreadsheet 2 cells F5 to J5 .... a similar range of cells.
Is there a formula I can use or do I need to venture into the programming side of things.
What I'd like to do is to input the value "Agent" into the yellow cell if there is not the word "Agent" already there. The position of the "Agent" cell will vary but is always located directly above the block of names below it.
View 3 Replies View Related