Copying Information From One Cell To The Next Blank Cell
Feb 8, 2014
I'm trying to build a macro that copies the information from cell D2 and then special pastes it into the next free cell on that specific row (as the information is from a vlookup so don't want to paste the formula) - ideally I'd like it to paste from H2 onwards but can move the spreadsheet around if that's not possible! I'd then like to do this for every row until there is no data in a row.
I've been using the below which I've found on the internet but this only pastes into column H and then just goes down the column rather than across the row, and I can't figure out how to do this.
Sub Summarize()
Range("D2:D25").Select
Selection.Copy
Sheets("Pot 2").Select
lMaxRows = Cells(Rows.Count, "H").End(xlUp).Row
Range("H" & lMaxRows + 1).Select
Selection.PasteSpecial Paste:=xlValues, Operation:=xlNone, SkipBlanks:= _
False, Transpose:=False
Range("D25").Select
End Sub
Here is what is supposed to happen: when the macro button is hit, today's date will appear in the first blank cell in row 3, then the text "late" in the next cell, then finally "1" in the next cell.
I have been trying to use .end(xlright) but i can not quite get it to work.
I am having problems finding a way to copy the contents of a cell and paste the content to a different worksheet on the first blank cell at the end of a column/row.
Is there a way without using code to have the text in a text box (excel 2003), copied to another cell or another text box on a different worksheet?
I have information in a text box on 1 worksheet. I would like this information to automatically be copied to another worksheet. On the master sheet, if any of the information gets changed or updated, the copied information should get updated as well.
Im currently writing a payroll sheet within excell and trying to write an IF statement to make a cell blank if referring to another blank cell but it is showing the formula is incorrect. Below is the following IF statement that im using;
My workbook is for financial planning but I'm attempting to streamline an input page (name, birthdate, etc) that will be referenced throughout the entire workbook to trigger automatic calculations (present value, education calculations, etc).
The cell in the input page is a birthdate - which when populated will trigger a cell on a different worksheet to calculate the respective age using this formula:
The problem is if there is nothing written in the birthdate cell then the age cell will automatically calculate 114 (reference photo below). Ideally I'd like that cell to be blank if nothing is in the birthdate cell on the input worksheet. I'm assuming since I'm using an IF formula to calculate the age already then I'll need to use a macro to to an "ignore".
I have made a table which contains 2 date columns, Both formatted as date (dd-mmm-yy), the second column is calculated as the first column, + 30, The dates work out fine when adding to a date in the first columns, but from a blank cell it displays 30-Jan-00.
e.g Started Finishes
12-Nov-13 12-Dec-13
30-Jan-00
09-Nov-13 09-Dec-13
11-Nov-13 11-Dec-13
Rather than delete the rows with the blanks in the Started column, is there a formula that I can use so that the cells in the "Finishes" column is left blank when the "Started" cells are blank?
The current formula for cells in the "Finished" column is:
I want to create a macro that will take information from one worksheet to another. The problem is that the first worksheet has an autofilter and i do not know how copy information only from the cells that were filtered with the correct information without copying it manually.
I have a macro that copies all my sheets onto a new sheet called combine. It is pasting onto the combine sheet starting on cell A2 instead of cell A1. Following is my macro.
Sub Combine() Dim J As Integer Sheets(1).Select Worksheets.Add Sheets(1).Name = "Combined" On Error Resume Next For J = 2 To Sheets.Count Sheets(J).Activate Range("A1").Select Selection.CurrentRegion.Select Selection.Copy Destination:=Sheets("Combined").Cells(Rows.Count, 1).End(xlUp)(2) Next End Sub
I'm having a column called "Body". Each cell in this column contains a huge amount of text. I want to select automatically certain values from that text and copy them into other cells. This image will explain what i mean:
I tried to work with the function MID but that doesn't work because the values don't have a fixed position. They don't start always at the same character number.
I have run an INDEX and MATCH formula to give me a resultant cell reference number. I now want to copy a cell to this specific cell reference using another formula.
For example the data I want to copy is in cell A1 and in cell A2 I have the result of the index formula (B1).
I know how to manually do a formula for this but wanting to know if there is a uniform formula that I can use that looks at the formula result of cell A2.
123569LOC23 is in one cell and I am trying to copy the "LOC23" to a new cell. However, the amount of digits vary: LOC23, LOC1,LOC15 etc all the way down the column.
ive had to retype this so please bear with me. ive utilised the resources of this site before but ive come to the time where i need to ask a question of my own.
now i will refer to my attached document as what im trying to achieve.
my project is to create membership cards for our social club at work, out of a list of people we have on our manifest.
If you refer to column A, this is where i will dump the manifest of members as time progresses (keeping in mind that more names will be added to this list as it goes).
What i am hoping to achieve, is to start at Cell A2 (highlighted in yellow). For the example the membership name is "a". i want to hit the macro button and the following will occur.
1. data "a" from Cell A2 will be copied to B2 (highlighted in green) and G6 (highlighted in blue). This moves the name from being on the unregistered list over to a membership card and to the registered list, which allows me to cross check that im not doubling up on names with new applicants and current members.
2. once this occurs, i was cell A2 to delete and cell A3 to be moved up, so now, cell A3's data "b" (highlighted in orange) will be moved to A2.
3. a similar process as point 1 will now occur, where A2 will be moved to the highest empty cell in Column B, which would be B3 now. It will also copy to G18 into the 2nd membership card.
4. this process occurs until column A is empty in A2.
5. i wish to really only have an A4 page worth of membership cards before i print, so i wish to be able to "reset" the membership card boxes, so that instead of the membership cards continuing all the way down the worksheet, it will do say 12, then print, then start back in the 1st box. Ideally this is a loop so that it occurs until there are no more names in Column A.
This is a huge feet for me as an idea because ive never gone beyond using basic recorded macros, however im the type who just HAS to learn how to do stuff, so i will lap up any information or assistance i can recieve from anyone here.
I have a spreadsheet with details of letters that should be responded to within 20 days, and i want to have a cell showing the amount that that need a response within 10 - 5 days. Basically I want to have a value of one returned to a cell in a row if one cell in that row contains a value between 10 and 5 (less than 11, more than 4) and another cell is blank. For example, AD27 contains 6, k27 is blank. I want AE27 to show 1. I also need the same if the value is less than 5, but i'm sure i could figure out how to alter it.
Basically I have a filtered list in colunms A to D. The user selects a cell in column A and I want to then be able to run a macro which copies that cell and the adjacent one in column B, into columns A and B on sheet2.
The complications are
Column B on the second sheet is merged with columns D to E so a straight forward cut and paste of A and B on sheet 1 into A and B on sheet 2 will not work in one cut and paste as it complains about merged cells. It would need to copy and paste A and then copy and paste B to avoid the error.
The row on sheet 2 where it is being pasted needs to be the first row between row 10 and row 30 where col A is blank (so it doesnt overwrite a previous copy and paste as they are basically creating a list on sheet 2 in those rows by runing this macro repeatedly). if there is no blank row then it should insert a new row at row 10 and paste into that
I have just generated a report of current customer numbers for our company. Unfortunately it reports it as "162 (162)". No idea why the program does it like that because it now makes using VLOOKUP very difficult.
What I want to do is copy the "162" part of the cell and paste it into the adjacent cell to make it easier to manipulate the worksheet. All of the customer numbers are in column D if that makes a difference.
I can't modify my formula to leave blank cells blank when dragging it down, Also, I've got two formulas that i need to combine. Please view the comments I've put in cells E4, F2,F3,H2 and I2 to understand clearly what am seeking. See the attached worksheet.
I am trying to track inventory over 160 days in a spreadsheet. Every week I update a table that shows the number of skus and dollar amount that are over 160 days in a table. I have a ton of formulas that will automatically populate once I put in the new weekly data on a different spreadsheet. I want to track the weekly data so what I would really like to be able to do is paste the actual numbers and not the formulas into another excel spreadsheet so I can track the progress over time. Is there a way to just paste the actual numerical number instead of the formula itself?
I have one column that contains an If statement formula and would like the next column to then work off of the first column (i.e. if that 1st column returns a value then then adjacent column uses that result).
What is happening now is that it is returning #value (because I guess technically the cell isn't blank?)
I am looking for an IF statement that would leave a balance cell blank if both the revenue and expense cells are blank, otherwise a formula would be calculated.
I presume this is fairly simple to do, since it's certainly easy enough to do manually by filling in a couple of rows and dragging them down, but I need it to be performed in a macro that I can run before other macros run.
What I need specifically is for the macro to go to G1 and insert the number .01... Then go to G2 and insert .02... Then G3 and insert .03... And repeat this until it finds the first non-blank cell ( row number this occurs at varies), at which point it ends and does nothing to that populated cell or any other cell in the column thereafter (including other blanks farther down).
The range of cells in column B containing the items has a name "ColStreams"
I need to go through the list, filling in each blank cells with the value contained in the first non-blank cell above it - so, in this case, rows 6 and 7 would contain "Item 2", row 9 would contain "Item 3", rows 11-13 would contain "Item 4" and so on.
Ok, basically C3 is a dollar amount. The default total for C3 is $0.00. If C3 is $0.00 then this formula cell will display a blank cell. If there is any other amount in C3 then the formula C3-C2 will run.
i need a code that moves down a column and for every empty cell in the column the cell to the left is cleared and then it moves on to the next cell down. the column is not always the same and will start from a selected cell, and the column will contain no more than 5 rows
I am wanting to have certain cells of data from one worksheet appear on another worksheet once the cells on the first sheet have data entered in them.
I find that I can do a simple formula to copy the cell but I want the cell to remain blank until data is added in the first sheet (it will be a mix of text and numerical entries).
