What I'd like to do is to input the value "Agent" into the yellow cell if there is not the word "Agent" already there. The position of the "Agent" cell will vary but is always located directly above the block of names below it.
View 3 Replies
I have a macro that copies all my sheets onto a new sheet called combine. It is pasting onto the combine sheet starting on cell A2 instead of cell A1. Following is my macro.
Sub Combine()
Dim J As Integer
Sheets(1).Select
Worksheets.Add
Sheets(1).Name = "Combined"
On Error Resume Next
For J = 2 To Sheets.Count
Sheets(J).Activate
Range("A1").Select
Selection.CurrentRegion.Select
Selection.Copy Destination:=Sheets("Combined").Cells(Rows.Count, 1).End(xlUp)(2)
Next
End Sub
I'm having a column called "Body". Each cell in this column contains a huge amount of text. I want to select automatically certain values from that text and copy them into other cells. This image will explain what i mean:
I tried to work with the function MID but that doesn't work because the values don't have a fixed position. They don't start always at the same character number.
I have run an INDEX and MATCH formula to give me a resultant cell reference number. I now want to copy a cell to this specific cell reference using another formula.
For example the data I want to copy is in cell A1 and in cell A2 I have the result of the index formula (B1).
I know how to manually do a formula for this but wanting to know if there is a uniform formula that I can use that looks at the formula result of cell A2.
123569LOC23 is in one cell and I am trying to copy the "LOC23" to a new cell. However, the amount of digits vary: LOC23, LOC1,LOC15 etc all the way down the column.
I want to copy the current region on sheet 3 and paste that into sheet2 starting with cell E4. But I don't want to actually use the copy method. I believe there is a way to do this. I was thinking the following:
[Code] ......
The idea I had was to simply state that cell E4 would be assigned the value of CurrentRegion on sheet 3. Is there a way to bypass the copy method?
If not, how to copy, then paste?
I want to use the little dot in down right corner of the cell to copy the cell content and the formula correctly.
But now the problem: every time I use it also copies the cell formation.... Is there a way that it only copies the content, but not the formation?
Basically I have a filtered list in colunms A to D. The user selects a cell in column A and I want to then be able to run a macro which copies that cell and the adjacent one in column B, into columns A and B on sheet2.
The complications are
Column B on the second sheet is merged with columns D to E so a straight forward cut and paste of A and B on sheet 1 into A and B on sheet 2 will not work in one cut and paste as it complains about merged cells. It would need to copy and paste A and then copy and paste B to avoid the error.
The row on sheet 2 where it is being pasted needs to be the first row between row 10 and row 30 where col A is blank (so it doesnt overwrite a previous copy and paste as they are basically creating a list on sheet 2 in those rows by runing this macro repeatedly). if there is no blank row then it should insert a new row at row 10 and paste into that
I'm trying to build a macro that copies the information from cell D2 and then special pastes it into the next free cell on that specific row (as the information is from a vlookup so don't want to paste the formula) - ideally I'd like it to paste from H2 onwards but can move the spreadsheet around if that's not possible! I'd then like to do this for every row until there is no data in a row.
I've been using the below which I've found on the internet but this only pastes into column H and then just goes down the column rather than across the row, and I can't figure out how to do this.
Sub Summarize()
Range("D2:D25").Select
Selection.Copy
Sheets("Pot 2").Select
lMaxRows = Cells(Rows.Count, "H").End(xlUp).Row
Range("H" & lMaxRows + 1).Select
Selection.PasteSpecial Paste:=xlValues, Operation:=xlNone, SkipBlanks:= _
False, Transpose:=False
Range("D25").Select
End Sub
I have just generated a report of current customer numbers for our company. Unfortunately it reports it as "162 (162)". No idea why the program does it like that because it now makes using VLOOKUP very difficult.
What I want to do is copy the "162" part of the cell and paste it into the adjacent cell to make it easier to manipulate the worksheet. All of the customer numbers are in column D if that makes a difference.
I am trying to make the cells Iam am copying paste hidden cells with all formats - seems to work fine other than the security part of them, Iam makeing a sheet for work and just trying to make it were it will not get destroyed by other users-
View 12 Replies View RelatedI found a formula that would copy only the last 2 digits of a previous cell and put it in a new cell. For example below, I want the cells to the right of the below to be:
12345 45
26548 48
21854 54
211ae ae
I thought it was a =right or something.
I have some cells with specific names, I want to copy them and keep the names. How can I do this?
View 6 Replies View RelatedI am using to copy info from a cell to ta text box that I created using the tool box.
View 2 Replies View RelatedI have a spreadsheet that people enter in their daily production numbers. In this spreadsheet, I would like them to hit the "save" button and it will put the total into a cell below that date. If they hit "save" multiple times during the same day,
I want it to overwrite the cell below the date. For the next day of production, they will need to do the same thing, except paste the data in to the cell below that current date.
In effect the code looks at sheet 'data' and creates new tabs depending on the contents of column f and then pastes data from the entire row into those tabs as appropriate - this is what I asked for and works wonderfully. What I would like it to do is to also copy the format of the row that it is copying. (most importantly the cell borders and colours)
I can (I think) identify the copy and paste elements of the code but have no idea what if anything I can change to make this work.
The code is as follows
HTML Code:
Sub CopyData2()
application.ScreenUpdating = False
Call Sample ' this inputs data into column f
Dim rCell As Range
Dim lastRow As Long
[Code]....
I am trying to copy a certain cell from one workbook to another.
ActiveSheet.Cells(1,1).Copy Destination:=Workbooks("c:directoryfilename.xls").Worksheets("Sheet1").Cells(1,1)
What I am trying to accomplish is to copy the contents of A1 from the current worksheet and paste it in A1 in the other workbook.
I have two columns of data in my worksheet.
Column-A Column-B
AAA 123-XXX-123
BBB 123-XXX-123
CCC 123-XXX-123
and so on
I would like to setup a marco to copy what is column A and replace XXX in column B. So the result as follow
Column-A Column-B
AAA 123-AAA-123
BBB 123-BBB-123
CCC 123-CCC-123
and so on
I want to copy the following function via vba to a number of cells
=countif(i10:ah10,"does not comply")
i basically want row to do a a comparison from i10 to ah10, row 11 to do a comparison from i11 to ah11 and so on.
i tried this as a first step
[vbcode]
Workbooks(WorkBookFileName).Worksheets(TabID).Cells(m, fc + 8 + 1).formula = COUNTIF(I97:AH97,"does not comply")
[/vbcode]
but i got the error
"compile error: expected: list seperator or)
and i tried this one
[vbcode]
Workbooks(WorkBookFileName).Worksheets(TabID).Cells(m, fc + 8 + 1).text = "=COUNTIF(I97:AH97,"does not comply")"
[/vbcode]
and got the error compile error: expected : end of statement
i read some place to ensure that the reference is copied, one can use the following
[vbcode]
wks.Cells(i + 13, 7).FormulaR1C1 = wks.Cells(i, 3).FormulaR1C1
[/vbcode]
but cant get through the first step, where i actually use vba to make the first entry
I have many values in Columns I and J in one table. The value in each Column I is a worksheet name (in this case "Hello"). My question is how do I copy the values in Range A10 to Z10 from Worksheet "Hello"? I want to stuff all the read values into a listbox. The listbox part is done though. Just the copying part is the problem.
View 9 Replies View RelatedI have a list of data in Column D of a spreadsheet. The cells contain a mix of text and numbers which is variable. Sometimes it could be "Internet 645" and sometimes it could be "VB456774" or lots of other combinations. Sometimes there are spaces, and sometimes none, and sometimes there is no numbers.
Is there a way to select Column D, copy out just the numbers only (w/o spaces or text or special characters" and copy to a new Column?
A demo could be:
Internet 645
CAT
DS2145KT
RAD$45
634KIT
So that once processed, a new columns would show:
645
2145
45
634
(notice that if there are no numbers in a cell, i would like all the data below it to be pushed up when pasted into the new column)
Is there a way that when a user enters data into one cell in a worksheet, I can make that same date appear in another cell in another worksheet in that workbook? Ex. User enters Monday in A1 on worksheet 1, I was A1 on worksheet 2 to automatically populate with that same data.
View 9 Replies View RelatedI need to able to copy certain parts of cells and paste it somewhere else. The data within the cell is presented like this City A/City B/City C. With an '/' seperating each. How can I copy just one part of that string using a macro(city a), and then keep track of it so that the next time I use a macro on that cell it copies the next part of the string(city b). I'll always copy the first City first so deleting it after it is a copied is an option but I dont even know how to do that.
View 6 Replies View RelatedI have a cell located in $X$1 that is always populated with a person's full name.
I need to display their email address, which is the first letter of their first name then their last name + '@company.com', in another cell on Sheet2
So for example 'Bob Smith' would be 'bsmith@company.com'
How can I go into cell X1 of Sheet1 and copy the first letter & the remaining letters after the space in between the names and paste them into Sheet2?
I'm trying to do something with pictures that have been inserted into cell comments. I'd like to be able to copy a picture that had been inserted into a cell comment, and save as .jpg with file name and file location designated by other cells in the spreadsheet. For example A1 contains "monkey" and has a picture of a monkey inserted into a comment on the same cell. B1 contains "zoo". I'd like to copy the picture from A1's comment and save as monkey.jpg to location c:zoo. Is this kind of thing possible in VBA?
View 5 Replies View Relatedif you can copy the result of a drop down box to another cell in another tab. Want to use front tab as master sheet and drop selected info down to other tabs .I used Form Controls to create drop down box -
View 8 Replies View RelatedI am trying to write a macro to do the following. I have data validation list in column G which will come back as either "Closed" "Pending" or "Completed". What I want to happen is when anyone changes a value in that column to "Closed" or "Completed" I want to cut the entire row (Columns A-G) and paste those rows on the "archive" tab which exists in the same worksheet. Then on the main sheet, I then need excel to shift the contents of the row beneath the row that was just cut up to fill in the blank row.
View 4 Replies View RelatedI have 5 columns in excel and a value in each column, i.e. J23, L23, N23, P23, R23 (I have left columns blank in between each one).
The values in J23, L23, N23, P23, R23 are all different.
I'd like to place a Checkbox underneath each of these cells (each checkbox being specifically for the value in the cell above it) so that when I click one of the checkboxes, the value that is linked to that checkbox is then copied into another sell, for example Cell J31.
I'm annualizing monthly returns. I have the formula for a specific year and would like to drag the formula down to annualize the monthly returns for the following years of data (1982-2013).
The monthly returns start in cell C4, with January 1982 and go down monthly in the C column.
My formula for annual returns is
for 1982 is {=PRODUCT(1+C4:C15)-1}
for 1983 is {=PRODUCT(1+C16:C27)-1}
for 1984 is {=PRODUCT(1+C28:C39)-1}
and so on.
How do I copy or drag the formula to annualize the rest of the years while keeping the pattern above without manually typing each year?
I created a 2007 workbook and distributed it to someone else. Now they have returned it I find that I can't copy any cell without a password window opening asking me for the password.
The user insists he has not added any password functionality and I can't immediately spot what it is in Excel that is restricting me. In the Ribbon under the Review tab the Unrestricted Access is selected and the sheets I'm trying to copy from are not protected. I can't see anything in the VBE and in any case the user would not have known how to change or create anything.
