find the attached sheet. I want advice for the VBA Code I used in this sheet. I am simply using nested if. advice me any other solution for the same as I want data to be copied from Jan to Dec ? I am beginer in VBA coding.
View 3 Replies
with a macro. I am looking to copy row 2 to the last row and past the copied rows directly below the copied contents.
View 9 Replies View RelatedI am trying to create a macro to copy a set of datas in a row , paste into another workbook (specific sheet),then save it as one of the datas that was copied over.
Workbook1
Ticket#
Description
Name
12345
Test 1
David
32145
Test 2
Steve
Workbook2 - sheet (ABC)
Copy row 2 from Workbook1, paste to row 1 in Workbook2 sheet(ABC)12345
Test 1
David
Saveas Workbook2 - ABC - "12345" - Ticket #
Copy row 3 from Workbook1, paste to row 1 in Workbook2 sheet(ABC)
And so on. I will have a set of data to trasfer to Workbook2, each row different workbook.
I'm attempting to copy some data from one spreadsheet to to a workbook in another spreadsheet. However, when I do my copy, I lose all of the formating of the intial data. Does anyone know if there a way that I can keep the the format of the original to the new spreadsheet?
View 5 Replies View RelatedI use this code below to copy information from various sheets on to one sheet,
PHP Code:Â
Private Sub CommandButton1_Click()
Application.ScreenUpdating = False
Dim copySheet As Worksheet
Dim pasteSheet As Worksheet
Dim xrow As Integer, xcol As Integer
[code]....
i use a command button to run the macro, but i would like something added that if someone else pressed the button and ran it again that it would check to see if it had duplicated the previous line and if it did it would delete it leaving just the one record for that week.
I am trying to write a macro that will:
A: copy data in cell A1 from Sheet1
B: Add an auto filter in sheet2 column A = to what was copied in Cell A1 from sheet 1.
I am enlcosing a file that I partially acquired (the macro portion) and I am trying to add to that.
The workbook has a dde link in sheet 1, the macro will write the data to sheet2 at set times. I am creating a report of the data in sheet 2 in sheet3. at this point it is very rudimentary. I need some assistance to clean up the macro and the post of the dat in sheet2. I have created a detailed (probably over detailed) explanantion in sheet 1 in a text box.
I am trying to copy a formula down a row. All I am getting is the exact same answer from the 1st cell instead of the new data.
View 9 Replies View RelatedI've been able to accomplish the main point of my macro which is to copy a section of code from each file in a folder and paste it into a different workbook. My problem is that when I paste the data, I lose all of the formatting of the data. ie, color, size, alignment. I know that PasteSpecial should accomplish that, but I'm using "destrange". If there is an easy way to convert to PasteSpecial... Otherwise, any ideas on how to make it work with destrange?
If Fnum > 0 Then
For Fnum = LBound(MyFiles) To UBound(MyFiles)
' Find the last row with data
rnum = LastRow(sh)
'create the destination cell address
Set destrange = sh.Cells(rnum + 2, "A")
' Copy the workbook name in Column E
sh.Cells(rnum + 1, "E").Value = MyPath & MyFiles(Fnum)
'Get the cell values and copy it in the destrange
'Paste the data in the previously established "destrange"
GetData MyPath & MyFiles(Fnum), "SDRL Status Rpt", "A4:G6", destrange, False, False
Next
End If
Whenever I copy and paste dates from the internet I can't get Excel to recognize the info as dates, thus making it impossible to sort by date. It doesn't matter which site I use, I have the problem with all of them.
[URL]
Using any of the links above, how I can paste those dates and get Excel to sort the date?
I have copied a data to another sheet. but when i change the data, the copied cell does not change...
View 5 Replies View RelatedI have data in sheet1, which needs copied to sheet2
But in sheet2 already data is available. In Sheet2, i want code to go from header to down , to locate the first blank row in between data and to paste data by inserting same number of rows as number of rows copied.
I am trying to pull 4 cells (Q3:T3) from multiple workbooks into a master workbook. When I run the below macro, I only have the first column of the copied data returned, and can't figure out how to have it paste all four cells.
Sub ExtractData()
Dim wb As Workbook
Dim TheFile As String
Dim MyPath As String
Static CopyCell
[Code] ....
I have a workbook from which i copy data and paste in another sheet, then close first excel. But copied data which is stored in memory gives a warning before closing the excel file.
The code i use is:
Sub Macro1()
Worksheets("Output").Range("A7:e1500").ClearContents
Sheets("Sheet1").Select
ChDir (Range("D3").Text)
Workbooks.Open Filename:=(Range("J4").Text)
Sheets("Final output").Select
Range(Range("P5").Text).Select
Selection.Copy
ThisWorkbook.Activate
[code]....
I need to get data from an excel spreadsheet copied and into the body of an email.
I have set it up to copy the data required, i have the email open, i have the to and subject fields filled in but i can not get the copied data inserted into the email.
Where am i going wrong or better yet what do i need to write to get this to work.
Dim objOutlook As Object
Dim objOutlookMsg As Object
Dim msgtxt As String
Sub send()
msgtxt = Sheets("bed update report").Select
Application.Goto Reference:="Print_Area"
Selection.Copy
Set objOutlook = GetObject("", "Outlook.Application")
Set objOutlookMsg = objOutlook.CreateItem(o)
'Set objOutlookMsg = objsession.CreateItem(olMailItem)
objOutlookMsg.display
With objOutlookMsg
.To = "someone@somewhere.co.uk"
.Subject = "Despatch Overtime Hours"
.body = msgtxt
.send
End With
Set objOutlookMsg = Nothing
Set objOutlook = Nothing
End Sub
I need to add a line on the top of a new worksheet with the data copied from another worksheets cells. Using a macro. The line has to be created everytime on the top of the new excel sheet with the previous data moving one down.
View 6 Replies View RelatedUsing a macro I want to paste from the clip board.
I can manually do this by opening the clipboard, selecting the data, which pastes to my specified location.
The macro copies to the clipboard okay, but loses the data that I want to paste because just before pasting I have to clear data which was previously been filtered - I have to do this at this point. The macro bogs down. If I end the macro there, I can manually open the clip board and choose the data I copied from there and paste it that way. I'd like the macro to do this for me.
The macro below in its current state adds data entered from the userform to a specific sheet. I would like to change it so that a player can be selected from combobox named txtmplayer and the data entered be copied to that specific players sheet.
If this information is vital: There are 8 players. Player sheets can be named player1, player2, and so on. I would like to keep same method for entry (finds first available row)
Below is a snip-it of VBA code that I am using to try and create a table on Sheet2 which I have named "Summary Unsorted". Sheet1's name is "Diagnostic Measures". The range name, RawDataTable", is what I am copying from Sheet1 and pasting the values onto Sheet2 and want to create a simple table. The error I am getting is "The worksheet range for the table data must be on the same sheet as the table being created."
'Copy/Paste data from Dianostic Measures worksheet (Sheet1)
'to the Summary Unsorted worksheet (Sheet2).
Range("RawDataTable").Copy
[Code]....
I want cell B4 on sheet 3, to show the value of cell B4 on sheet one ... only if there is a value in B4 on sheet one then i want the rest of row 4 to be copied to sheet 3 also.
HOWEVER if the value in cell B4 sheet 1 is BLANK/EMPTY then i want the full row to be over looked and the next row to be checked (B5 all the way to B30)
Once B4-30 on Sheet 1 has been checked and only the rows showing a data/value have been copied to sheet 3, i then want the same process to start again on sheet 2 - Again only the rows showing data/values to be copied.
Below is code I have attempted. I am learning VBA and have gathered this code from the internet and this forum. I have data that is in columns B to E and from row 7 down. I want this VBA code to run when data is copied/pasted in these cells. Where the last values stop will vary so I just want to be sure this code is executed after all the data is pasted in these cells. The data will be pasted at one time. When the user removes the data from these cells, I do not want the code to run.
Private Sub Worksheet_Change(ByVal Target As Range)
'Do nothing if less than four cells are changed or content deleted
If Target.Cells.Count < 4 Or IsEmpty(Target) Then Exit Sub
[Code].....
I have a VBA excel file that pulls data from a CSV file downloaded from a link. I format this data into a table through excel and then copy it over to Outlook. This is where the problem is. I get a runtime error 4065 for "file is locked for editing".
View 1 Replies View RelatedI'm trying to find a macro that will copy data from the areas of B120:E179 and I120:K179 for example (linked to another worksheet within the workbook) and special paste (Values Only and skipping blank cells) it to the next available open cell up top where basic data entry will be taking place B10:E29 and I10:K29. I need it to only copy/paste the rows with data (skipping all cells/rows with no data) and once it is finished coping I will need it to place an "X" in column M next to the row that it copied data from. I would also need it to reference the data in each row from B to E and if there is an entry say on B14 to E14 that matches it but if I10 to E29 are blank then paste that information on row 14. If it does not match or if those columns are full then paste on next available line.
I hope I'm making sense here. This is for a vehicle tracking log between checkpoints. Each driver and info will be listed on each row. Columns B through E will contain information for each driver: name, badge, #passengers, and vehicle #. The log lists location, time, and destination for outgoing travelers in columns F to H. Incoming info is listed on Columns I to K............
The formula below
=IF(M22<=286.74>191.16,(286.74-M22)*30%, IF(M22<=191.16>127.44,((191.16-M22)*50%)+28.674, IF(M22<=127.44>79.65,((127.44-M22)*70%)+60.534, IF(M22<=79.65,((79.65-M22)*90%)+93.987. is returning all data based on =IF(M22<=286.74>191.16,(286.74-M22)*30%, and is disregrading the rest of the formula.
I think I just need a basic Nested For Loop code. I have a list of in column A, from A1:A537 and another list in column B, for B1:B50. I want to add a column that concatenates, each item in Column A to B1 (so 537 rows), then again each item in Column A to B2, another 537 rows, etc.. this loop is repeated 50 times, one for each name in column B.
View 3 Replies View RelatedThe data from the Data sheet is copied over to the Report sheet with formula.
Basically, what I need to do is If statement:
-when there is no any data in csv file (so the Data sheet will be empty);
-the range (A7:N1000) to be hidden (on the Report Sheet)
-the Report sheet to be saved
and also...
I would like to ask, how to select from the Data sheet, the rows with Data only. I copy them over with formula instead of macro- but would like to hide all the empty rows on the report.
Option Explicit
Sub Update_Report()
'
' Macro1
Dim extract1 As String
Dim dReport As String
Dim rSheet As String
Dim dSheet As String
extract1 = "LeadSheetAll_0001.csv"
dReport = "Appointments.xls"
rSheet = "Report"
dSheet = "Data1"
Application.ScreenUpdating = False
Application.DisplayAlerts = False
I setup this function to pull my staff's schedule an auto generate the forms i need however the lookup function works properly sometimes and improperly others i checked the syntax and it is correct how ever the wrong data is continually returned. I have attached the file if anyone can help. the VISUAL PLAN tab is the one contaning the formula and it pulls data from PLAN, CURENT SCHEDULE, AND CATAGORY SUMMARY however the only formulas hat i have a problem with are the ones referencing CURENT SCHEDULE.
View 9 Replies View RelatedExcel spreadsheet will contain a form that will consist of drop down boxes (data validation). Each drop down box will define the data that can be selected in the next drop down box.
The way I initially went about it, is creating nested IF statements. However, we all know there is a limit of 7 nested IF statements. I have 10! So below formula does not work:
=if(B5=1,F5:I5, if(B5=2, F6:I6, if(B5=3, F7:H7, if(B5=4, F8:J8, if(B5=5, F9:H9, if(B5=6,F10:G10, if(B5=7,F11:H11, if(B5=8,F12:H12, if(B5=9, F13:I13, if(B5=10, F14:K14))))))))))
I tried other workarounds such as CONCATENATE, or & signs. No luck. VLOOKUP does not work also, because there are multiple columns in col_index_num. Anything else I try gives me this message:
“The List Source must be a delimited list, or a reference to a single row or column”
What should really happen is this:
User selects value in first list box. Second list box shows values associated wih the value from the first drop down only.
i am having trouble putting together an IF Formula together with and/or. i need to do the following
if cells k8 and l8 and r8 are empty, then no data should show.
if cells k8 and l8 and r8 is zero, then show zero.
otherwise add all three cells.
i thought i should use if(and... that is all 3 cells must be empty or zero.
=IF(OR(ISBLANK(K8),ISBLANK(L8),ISBLANK(R8)), "no data", IF(OR(K8=0, L8=0, R8=0),"ZERO", K8+L8+R8))
i have tried if(and) and if(or) and no matter what i have tried it doesnt work
I'm trying to figure a to enforce dual data validation on a single cell. That is, I need to restrict the user to entering only a decimal value, only if a particular other cell (say A2) is blank. To put it another way, if A2 is blank, the user can enter a decimal value, but if A2 is not blank, the user cannot enter anything. I can use Data Validation to enforce either the decimal restriction or the ISBLANK, but I'm not sure how to make them work together.
View 2 Replies View Related
