Nested IF AND Formula: If Cells K8 And L8 And R8 Are Empty, Then No Data Should Show

Dec 31, 2006

i am having trouble putting together an IF Formula together with and/or. i need to do the following

if cells k8 and l8 and r8 are empty, then no data should show.
if cells k8 and l8 and r8 is zero, then show zero.
otherwise add all three cells.
i thought i should use if(and... that is all 3 cells must be empty or zero.

=IF(OR(ISBLANK(K8),ISBLANK(L8),ISBLANK(R8)), "no data", IF(OR(K8=0, L8=0, R8=0),"ZERO", K8+L8+R8))

i have tried if(and) and if(or) and no matter what i have tried it doesnt work

View 4 Replies


ADVERTISEMENT

Sort Rows To Show Values Of Cells In Sequence And Eliminate Empty Cells

Nov 11, 2013

I have data on 400 rows. Each row has a maximum of 10 cells with data, but many have empty cells with no data. I would like to sort each row to show values of cells in sequence and eliminate empty cells. I can use the sort row function but its a long process for 400 individual rows. Is there an easier way?

View 1 Replies View Related

Blank / Empty Cells To Not Show 0

Dec 19, 2013

Please see attached workbook. I know for a fact this isn't the most effective way to do this, but I just needed something really quick for a small worksheet that my department at work is using. A1:C7 are supposed to represent 3 different types of "methods" In the case of my worksheet, I just typed random stuff.

Basically, I have data validation in B10. Depending on which one I select (1 corresponds with A1:A7, 2 with B1:B7, and 3 with C1:C7), it is supposed to populate that data. I've done this with nested if statements in D10:D16. The issue is that for options 2 and 3, it shows 0's where the blanks should be.

View 3 Replies View Related

Make Formula Cells Empty Rather Than Empty Text

Apr 17, 2008

Is it possible to make a cell "really" blank/empty based on an If statement? For instance:

=if(a1>10,a1,"")

Has a value_if_false of "". But Excel interprets this a bit differently than a cell that never had anything typed into it.

So if you have a column full of this formula copied down, and hit <control+down arrow>, you will go straight to the bottom and skip over all rows. Whereas if you have a column with values and empty cells alternating and hit <control+down arrow>, you will only skip the empty cells and go to the next value. Excel treats the conditionally empty cells as if they have a value, when it comes to this type of navigation. This holds even if you copy and paste "Values" for the cells over the formulas.

Is there any way to tell Excel to make the cells truly empty?

View 3 Replies View Related

Show Message If Empty Cells In Pivot Table

Aug 18, 2006

I'm trying to check and prompt a message box if there is a empty cells found in the pivot table.

If Activesheet.PivotTables("PivotTable1").NullString = "" Then
MsgBox "No Match Data Found"
End If

I have try out the code caption above but not the result as I want.

View 7 Replies View Related

If No Data, Then Show Empty Cell

Jul 31, 2009

I'm using Excel 2003 and have a main workbook which stores the quotes, invoice, worksheet and contact details. In order to email only the invoice to a customer I have created another workbook which replicates whatever is shown in the open invoice tab of the main workbook. A macro from the main workbook then opens outlook.

I attach a sample of both for information. My problem is this - You will note that on the email invoice that any entries where there is no cost in the main workbook, that it shows "£ -". how to get it to show an empty cell if no value in the main workbook?

View 2 Replies View Related

If No Data, Then Show Empty Cell Using Conditions

Oct 22, 2009

I'm using Excel 2002 and am having trouble with what I thought was a simple conditional command. On part of the spreadsheet I have 3 columns: Hours (D5), Cost Per Hour (E5) and Total Cost (F5). Here's what I'm trying to do.....

If there is no value in the Hours then the Total Cost should show an empty cell and conversly if there is a value in Hours then calculate Hours*Cost Per Hour in the Total Cost cell. My condition for cell F5 is as follows: =IF(D5="","",SUM(D5*E5)). Whilst it works if there is a value in D5, when empty F5 shows #VALUE!

View 5 Replies View Related

Nested Formula: Validate The Cells Are Not Blank

Oct 28, 2009

Trying to create a formula, assume it will need to be a nested formula since I need to validate that cells are not blank and if so use a different cell .....

View 9 Replies View Related

Excel 2010 :: Use Nested IF Formula To Color Cells?

May 16, 2014

I am trying to use the IF formula or a similar VBA/Macro to color certain cells. We deal with 16 different sand types that come in on rail cars. I want to put in the sand type in a cell; EX: C11 has text "30/50BH" if this statement is true to color cells A11-D11 yellow. If it is not a true statement to check for the next sand type, "20/40BH" and go on from there. If I can get an example of what to do I can build it for the 16 sands we have.

The formula I have in mind would be something like

=IF("30/50BH",[colorA11:D11,Yellow],[IF("20/40BH",[colorA11:D11, Purple], .......

I'm sure there is a less brute force method of doing this, but my knowledge of programming and excel is limited. I am using the 2010 version of Excel.

View 14 Replies View Related

Formula Arrays That Will Omit Empty Cells In My Formula

Jan 31, 2008

I am looking to average a range of cells which won't always be the same size. How do I create a formula array that will omit empty cells in my formula.

View 9 Replies View Related

Show Data In Cell Only If Other Cells Show Data

Sep 8, 2009

I have 2 different formulas that I need changed in a similar way.

The first formula is for cell AV11:
=SUM(BI11,BP11,BW11,CD11,CK11,CR11,CY11,DF11,DM11,DT11,EA11)+10

Every cell starts off blank.

What I need is for cell AV11 to always start off blank until data is entered into one of the other cells. The problem is that since the sum always needs to be +10 only when data is entered in the other cells, I don't know how to keep 10 from showing in cell AV11 when no data is typed in the other cells.

The other formula is for cell CO39:
=(CU8)+3

I pretty much need the same thing. If no data is entered in cell CU8, then I do not want cell CO39 to show the 3.

View 9 Replies View Related

Average Formula With Empty Cells

Mar 6, 2008

I have a grade system where I need to obtain an "Average" of grade data within four cells. At time there may onlt be two cells with a value or three. Example: The cell cell cantain a value of 100 points with the totral of 400 point. AS we know the "Average" would be 100 points. But is only two cells cantained 100 point and the other two where empty then the "Average" come back as 50 points. Because I have 4 cells that requires a value input. So my question is how do I create a formula that will give the correct value for the "Average" of data that is placed in the cells. The values are calculated as a total from the grades entered. That total is in F14, F31, F48, F65 - Now if F14 has a value of 100, and F31 has a value of 100 then the "Average" should be 100, but it is not for the is calculating F48, and F65 as 4 values, so the return is 50. The situtation is that I need all the cells for in some cases data will be necessary, but I need the "average" to be calcalated for only the values entered.

Where is the Formula.
=IF(SUM(F14,F31,F48,F65)=0,0,AVERAGE(F14,F31,F48,F65)) - My brain says this is simple but no matter what I do it returns 50.

View 9 Replies View Related

Insert Formula In Empty Cells

Jun 19, 2008

I have a sheet that I put a blank row before every change in column G,

Dim lr As Long, i As Long
lr = Range("G" & Rows.Count).End(xlUp).Row
For i = lr To 2 Step -1
If Range("G" & i).Value Range("G" & i - 1).Value Then
Rows(i).EntireRow.Insert Shift:=xlShiftDown
End If
Next i

and now I need formulas in columns B and I in those blank rows. I'm happy to roll it in to the above piece of code, or put it in after.

I don't think I can use LastRow to define my range and replace blanks with formula because of the blank rows. I would need more of a "LastRow with only one blank in between populated rows" if such a thing exists.

The formulas will be ="*"&H3&" DWG "&G3 for cell B2 and =I3 for cell I2.

View 9 Replies View Related

Min Formula Excluding Any 0's Or Empty Cells

Mar 25, 2009

I have tried a number of different ones from my search of this forum but I'm getting an error. here is a sample of my spreadsheet.

I want it to give me the lowest number, I don't want it to look at the 0's or if the cell is blank.
Here is my formula and my error:
=SMALL(N196:N203,COUNTIF($N$196:$N$203,0)+1)

my error is #num!

I've also tried others including using the MIN function but either 0 is entered or the error above.

3402414

View 9 Replies View Related

Formula Referring To Empty Cells

Dec 19, 2006

I think I understand what you were talking about now with the generation of the watchbill using the rand() and sort. You were trying to get me to get rid of the whole system I was using before and use only the rand and sort. I thought you were asking me to incorperate the rand sort thing into the randomization process I already had using offset etc. The whole thing works good now, however, because the column Ive designated for the roster names may or may not always be filled the formula sometimes refers to empty cells in that column thus producing 0s on the watchbill. I was thinking maybe (if its possible) having a formula to identify a 0 and if so skip to the next cell down. The formula would repeat until it found a name without a zero in it.

View 5 Replies View Related

Formula Based Upon Number Of Empty Cells?

Jul 28, 2014

I am creating a fantasy football draft board using excel. To keep it short and sweet, each individual team (one per column) has a $200 budget to draft players. Each team must fill 14 roster positions (one per row), but here's the catch; you must spend at least $1 on all of the 14 players on your roster. So you have a maximum bid amount which is your remaining budget subtracted by $1 for every remaining spot you have left to fill.

I have already created a "remaining budget" field which subtracts each drafted player's inserted dollar amounts from the $200... easy. Beneath this, I'd like to create another cell per team that tells you your "maximum bid," which is essentially 200, -1 for every cell that remains blank. I have played around with the conditional IF formulas but cannot seem to have it account for multiple cells.

As a workaround, I have made columns hidden beneath the board which contain the conditional IF, ISBLANK fields which are -1 if true and 0 if false. Then creating the "remaining budget" field that subtracts these values from 200. This works, but it's not perfect, as when you have multiple players you still need to draft and you've exhausted your budget only saving $1 for each, it overstates your "maximum bid" by $1, or when you have $X left and you need to only fill one more spot, it ill tell you your "maximum bid" is $X-1.

View 5 Replies View Related

Ignore Empty Cells In A Sum / Countif Formula?

Jan 18, 2014

I have a list of assessment scores for students with a matching grade in text form. I want to show the percentage of students that receive "Adv" and "Pro" grades out of the total number of students (cells with data). But I have extra cells in case students are added during the year. I need to have the formula ignore any empty cells and count all of the "Adv" + "Pro" grades divided by number of students with data. I would like to do this by including the extra cells in the formula so I don't need to amend the formula should students be added. This is the formula so far. Maybe there is a totally better way to write this formula.

=SUM(COUNTIF(C7:C60,"*"&{"Pro","Adv"}&"*"))/COUNTA(C7:C60)

View 3 Replies View Related

Sumproduct Formula - Ignore Empty Cells

Sep 26, 2013

I have a table that looks similar to the below. I want to be able to extract the numbers between the brackets and add all up in the last column (as shown in example below).

I have used something like the below however it returns #VALUE in column F because of the empty cells.

(SUMPRODUCT(REPLACE(A1:F5,1,FIND("(",A1:F5),"(")+0))

I need a formula that will be applicable even when there are empty cells and return the results as shown.

A
B
C
D
E
F

Worker (3)
Engineer (23)
Manager (1)

27

Plumber (2)
Designer (20)

22

View 6 Replies View Related

Check If X Cells Are Empty Before Formula Calculation

Dec 5, 2008

I have a spreadsheet that uses IF(C5>J5,(EDATE(C5,12)),(EDATE(J5,12)))__ IF(J9<D9,(D9-$N$1)) where N1 is current date. If C5 and J5 are empty how do I get it to ignore the formula and just leave the other cells blank?

View 3 Replies View Related

Formula To Move Data On Same Row And Deleting Empty Rows Between Data

Jul 17, 2014

formula to make data on same line.On converting data2 is above data 1. I insert a column on left . Need to use mouse right click shortcut delete manually shift cells left and then delete shift cells upto have both data on same line but should be in different cells and same sequence per attached ALSO TO REMOVE "/ -DASH HYPENS.

What I need is formula to move the data2 on same alignment and to delete the two empty rows between both data.

See annexed file for expected results.I have preference to have a formula much more.

View 7 Replies View Related

Excel 2007 :: Formula To Count Empty Cells On Worksheet?

Nov 22, 2012

Is there a formula to count empty cells on a excel sheet?

View 4 Replies View Related

2 Cells On A Form - Formula To Show If Then

Mar 17, 2014

I have a list of customers and each customer has a commission value tied to it. I have a form and in it I have a cell that has a list of customers that someone can choose from a drop down list. If a certain customer is chosen I need their commission value to show up in another cell. example: How do I create a formula to show if Company A is chosen in cell G4 then the commission is 5% in cell G38 , If Company B is chosen then the commission is 8%.

View 9 Replies View Related

Find Empty Cells In Column And Auto Input Formula With Certain Criteria Using VBA

Apr 24, 2014

i have the following code, what it does is, it locate those empty cells in column M and insert the formula "=TODAY()". What i need the code to do is only insert to the empty cells in column M if there is a value(as long as is not empty) in the reference cell of column E.

VB:
VB:
Private Sub CommandButton3_Click()
Dim wks As Worksheet
Dim rng As Range

[Code].....

View 7 Replies View Related

Formula That Checks If Cells Are Empty Or Filled In And Gives Valid Or Invalid Message

Aug 11, 2008

I'm looking to put a formula in the last column (Card Valid/Invalid (N3:N8)).

I want this formula to say IF Project Name OR Start date OR Due Date or Type OR Author OR VS are empty then I want the last column to say Invalid else if all of these columns are filled in then give valid. Also if a completed date or no. of review loops are filled in but not both then give Invalid but if both are filled in then as well as all the rest of the info give Valid.

Project Name - Valid/Invalid is B2-N2

View 19 Replies View Related

Formula To Show All Text In Different Cells But Not The Empties?

Jun 4, 2014

Im trying to add Cells K2,L2,M2,N2,O2

For instance Column K2 could have the number "2" in it, but in K3 it might be blank.

L2 could have the number 3 in it, but be blak in L3.

M2 could have 50 in it or could be blank.

What I want for P2 to say is 2&3, if the cells in K2 and L2 show the 2 and 3. If it has the 50 in M2 thought, I want it show it.

View 3 Replies View Related

Formula To Show (not Add) Values Of Different Cells In One Cell?

Jun 8, 2014

For example: C4=5,C5=18, and C6=7.

I want A1 to show 4,5,18,7 (the values of cells C4 to C6).

I believe I have done this before, about 10+ years ago.

View 4 Replies View Related

Delete Empty Cells With No Data

Mar 27, 2008

I have a worksheet with data in column A. However, there will always be blank cells throughout this column. I am looking for code that will delete the blank cells (so to speak) and move the below cell with data up one or however many blank cells precede it, hence deleted the blank cell. End result, column A will have no empty cells. The data contained within the cells will be both numerical and text.

View 3 Replies View Related

Formula To Calculate How Many Cells Show A Specific Word

Sep 30, 2009

How can I create a formula to add up how many cells in a column show a particular set of text? For instance; the column in my spreadsheet looks something like this:

MJR
DML
MJR
RJG
RJG
MJR
DML

I want to know how I can create a formula that will automatically tell me how many times "MJR" is listed; how many times "DML" is listed, and so on.

View 2 Replies View Related

Is A Cell With A Formula Considered True Or Is It Empty If The Criteria Is Empty

May 30, 2009

Is a Cell with a formula (like shown below) considered true, or is it empty?

=IF(Scorecard!$B$13,Scorecard!$AD$4,"")
If Scorecard!$B$13 was False...
Would a cell with the above formula be considered?
True or Empty?

If Scorecard!$B$13 was True...
A cell with the above formula would be True.

View 9 Replies View Related

How To Leave Cell Empty When There Is No Data Input After A Formula

Jul 28, 2014

When i use

Code:
=IF(ISBLANK(I31);"";I31-IF(ISNUMBER(J31);J31;0))
The cell gives me an error, i think because I31 has a formula that returns no value.

How can i stop the formula if cell I31 gives me no data??

View 5 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved