Nested IF (index And Match): Calculate A Charge In Cell K15 Based On Values In B9 And C10 Referencing The Table I8:R9
Jan 21, 2010
I'm trying to hone a quoting tool to generate an amount based on a given range and minimum charges for specified subsects of the range. If you reference the attachment I'm trying to calculate a charge in cell K15 based on values in B9 and C10 referencing the table I8:R9. What I cant figure out is how to create a minimum charge of 50 for J8:P9 (points A-G) and a charge of 95 for Q8:R9 (points H-I).
View 2 Replies
ADVERTISEMENT
Aug 19, 2008
I'm trying to extract the selected suppliers orders from a 1000+ rows list ; like appearing with the example of supplier "D" ; and the new one should be dynamic , it means if any data added to the source orders list and if the supplier was one of the selected the new table automatically update ; or can be refreshed
View 9 Replies
View Related
May 22, 2014
I have three worksheets the first one called Econ the second one called CheckLogs and the third is a customer sheet. I am needing to match up a cell from the Econ sheet with a cell from the Checklogs sheet and then it matches a cell from the customer sheet with a cell from the checklogs to determine what customer sheet. My problem is how do I loop through the customer code cell until it finds the correct cell.
=IF(B1=CheckLogs!B2,INDEX(CheckLogs!$F$2:$F$4493,MATCH(Econ!G2,CheckLogs!$C$2:$C$4493,0),MATCH($B$1,CheckLogs!$B2:B4493,0)), "")
so in the formula "B1" is located on the customer sheet and is the customer code field, "CheckLogs!B2" is on the CheckLogs sheet and is the customer code field. I'm just not sure how you loop if the customer code in B1 doesn't equal the customer code in CheckLogs!B2 and run through the formula again.
View 11 Replies
View Related
Jul 7, 2014
I am trying to write one Excel formula that can accomplish the following: Review a Discount Sheet to determine whether a Class Name should be purchased based on its current discount compared to my Target Discount for that Class Name. The majority of the time, weekly discount changes occur in 5-10% increments, but occasionally they will occur in increments of 20% or more. If a discount percentage increases by 20% or more and surpasses my Target Discount, the current method I am using to automate this process does not work.
Example: Last week's discount in cell G2 is 25%, and this week's discount in cell H2 is 40%. The Target Discount for that class is 30%, so under my current system I would not request that Class Name for purchasing because the current discount does not exactly equal my Target Discount, even though the previous week's discount did not exceed my Target Discount and now I should purchase that Class Name because the discount has gone from not meeting to exceeding my Target Discount.
INDEX MATCH used to retrieve current discount:
=INDEX('Discount Sheet'!$H$2:$H$4910,MATCH(A3,'Discount Sheet'!$F$2:$F$4910,0))
Validity Test in Cell F2 to compare Current Discount to Target Discount:
=E2=C2
NOTE: The above validity test could include a >= to capture Current Discounts that have exceeded the Target Discount; however, over time all Current Discounts will exceed the Target Discount. It is only when last week's discount did not exceed the Target Discount and now the Current Discount does exceed the Target Discount should a class be purchased.
The final result of this formula should be "TRUE' or "FALSE" without having to cut and paste any data for additional validity comparisons.
View 5 Replies
View Related
Feb 7, 2014
I've attached a sheet with the problem.
I have one sheet which summarises the status of documents in another sheet. I'm using INDEX and MATCH to return the correct Document title and info. But I need to offset/countif/INDEX MATCH again or something to get to reference the latest revision status of the document.
View 8 Replies
View Related
Jan 19, 2009
I have a number of identicle tables, that have all been seperatly named. On a summary tab i am using an index match formula to pull back key pieces of data from the table that is identified by cell B2. So if in B2 their is SCB, i would like the formula to apply to the table SCB. The formula (when useing the word SCB works fine):
View 2 Replies
View Related
Jul 11, 2012
I have encountered a situation where I need to essentially accomplish a reverse Vlookup (using index match) and return multiple values.
View 1 Replies
View Related
Jan 7, 2010
I'm having a bit of a block with an index/match formula that I am trying to create for the attached spreadsheet. i.e. I need to populate cell J3 with the info the corresponding letter contained in the table to the far left. The numbers of reference to match are the 'zones' in H3 and J2.
View 2 Replies
View Related
Apr 24, 2012
I have a rather large table that I need to return the column heading from.
Within the table I have a list of Names in the left most Column (A) and a list of Percentiles in the header row (row 2) (incrementing by 5%). By inputting the name and a cell value I am trying to return the column header.
Using an example;
5% 10% 15%
Bob 3.5 4.1 4.15
John 3.6 4.2 4.30
Chris 3.3 4.9 4.95
Sammy 3.7 4.6 4.7
Like I said, knowing the name and the cell value, I want to return the percentage value. So for example, Bob would be one input value, and another input value would be 4.1. I would want excel to return 10%.
I have found different suggestions using a combination of index/match but even using these functions I cannot get it to return the COLUMN value instead of a cell value.
View 8 Replies
View Related
Mar 10, 2014
I am working on creating a simple Excel Database of an Engineering Tool Room Inventory for work. However I can not seem to get one particular 'NESTED IF Function' to do what I want it to do. (In advance warning, I may be going down the wrong route and might have used the wrong Formula in Excel but from my understanding the 'IF' function seemed the most plausible.
Issue: All I would like to do is for a NESTED IF Function to be able to say this:
1. When a user inputs data into one column, for example 'Column A', with the following data: 4" Square
2. Then the neighbouring column, for example 'Column B', would have a NESTED IF Function.
3. Which would output a logical response, "A, B, C, D, E, F etc...", depending on what is written in Column A.
If 'Column A' - 4" Square, Then 'Column B' - A
If 'Column A' - 5" Square, Then 'Column B' - B
& So on...
But the NESTED IF Function should only put a logical response if there is certain values within the cell, for example:
User types a value into 'Column A' which contain - 4 & S, Then 'Column B' - A
User types a value into 'Column B' which contain - 5 & S, Then 'Column B' - B
& So on...
Currently to do the above function, I have utilised the following Excel NESTED IF Function:
[Code] .....
& The following happens:
1. User inputs data into 'Column A'
2. The NESTED IF Function then provides an automatic response.
3. However it relies on the data being inputted without the ' " (Quotation Symbol)'
4. & With me defining the exact phrase that should be typed into the cell, for example, "4" Square"
Other: I have attached an example worksheet of the NESTED IF Function in practice, with two tables. One showing what is happening with the code above and one table showing what I would like to happen but with no function.
Example - IF Function.xlsx
View 3 Replies
View Related
Jun 7, 2014
I am trying to use a nested INDEX and MATCH array formula to return the value in column C when matching column A and column B, but with a few more criteria.
The range containing all the data
A
B
C
1
Cat 1
January 1, 2014
John
[Code] ..........
I am looking for the array formula to return the name of the person in column C who is in Cat 1 after the date in column B.
For example;
C7 should return "John" because B7 requests "January 15, 2014", which is after the value in B1
C8 should return "John" because B8 requests "February 15, 2014", which is after the value in B1
C9 should return "Andrew" because B9 requests "August 15, 2014", which is after the value in B4
The best try I had for the formula in C7 was
{(INDEX($A$1:$C$4,MATCH(1,($B$1:$B$4>=B7)*(A$1:$A$4=A7),0),3))}
This brings back "John" as desired in C7, but when copying down the table into C8 and C9 both C8 and C9 return Andrew.
I guess this is due to my ">=" condition in the Match formula and it is returning "Andrew" because "Andrew" is also after the date requested, but I cannot for the life of me work out how to get it to work.
View 2 Replies
View Related
Feb 4, 2014
I have two sheets of data , sheet A and Sheet B.
Sheet B contains a column called "Name" and for each name, and for each name there are corresponding numbers. In sheet A, I have a "list of interest" in column A. What i want to do look through the data in sheetB to find a match from the list of interest and return the corresponding letters, located in column A.
I have filled out the first two rows of results that should be returned as an example.
One idea i had was to put a vlookup formula in each column result 1 to result 6 so i can catch all 6 "Serves" columns from column B, but there may be duplicates in the serve columns and vlookup only reports the first match.
View 3 Replies
View Related
Aug 28, 2012
Basically where the columns say 2011 or 2012 AND 1, 2, 3. I want to be able to have it index the number below based on the GL number on the left and both the year and period on the top. I think that you can do with using the sumproduct function with the binary, but the computer is a little dated and it takes a while to run those calculations.
2011
2011
2011
2012
2012
2012
[code].....
View 5 Replies
View Related
Jul 11, 2008
INDEX/MATCH multiple ocurence match values needed
View 9 Replies
View Related
Apr 15, 2008
I’m trying to add a shipping charge calculator based upon weight to a worksheet. I was trying to do with with VLOOKUP (my first attempted use of this) so I created a second worksheet called ‘Shipping’ which has the weights in column A (Weight) and the corresponding shipping cost in column B (Price). Up to 70 pounds, column A increases in two-pound increments (A2 through A36, 2 through 70 lbs); from 70 through 150 pounds, the increases are in five-pound increments (A36 through A52, 70 through 150 lbs). The total weight to be shipped is derived from SUM(D2:D30), located on the first worksheet called ‘Order’ in cell D32. In cell E32 I have entered this formula: VLOOKUP(D32,Shipping!A2:B52,2).
My problem is if Order!D32 returns something like 4.5, the value for four pounds is the result, while the six-pound charge should be the result. If I round this value up to 5.0, 5.5 or even 5.9, I get the same result.
I know I’m not supposed to guess at what I need to do, but these are my thoughts: 1) I need to modify the VLOOKUP formula to select the next higher value, i.e., so the 6 lb charge is selected for E32 when D32 contains 4.5 lbs, or the 85 lb charge is selected for E32 when D32 contains 82 lbs, 2) I need to add a ROUNDUP function to the SUM formula; this would need to round up to the next even number up to 70 lbs and then in increments of five above 70 lbs. I don’t know if either approach is correct, and in any case, I couldn’t figure out the syntax for either of these.
I’ve attached a sample spreadsheet, Shipping_Charge.xls.
View 5 Replies
View Related
Jan 12, 2009
I have a table with the months from B1:M1 & Customers from A3:A35. B3:B35 are transaction numbers. On another sheet, I have a cell, C2 with the name of the month that I type in, I've named it MONTH. I also have a seperate section for each customer that NBVC has helped me populate from another sheet based on MONTH and their actual transactions. At the bottom of the section, I want it to populate from this other table based on the month in the MONTH cell.
View 2 Replies
View Related
Sep 11, 2013
I am putting together a procedure to calculate a value based on all of the active cells in column "A" and a couple other conditions. "k" is my variable to put a value into (k,8) until all the active cells in column A have a corresponding value in (k,8)
I have my scenarios all built out into If statements and the code runs....but no value is being added to cell (k,8) for any of the rows with entries in column "A" when the procedure is finished running. Depending on the values in (k,2) and (k,3) there are four different ways the value in (k,8) needs to calculate as I have built out below. Why my values aren't being added to (k,8)?
Code:
Sub CalcSpecialFee()
Dim k As Integer
Dim cell As Range
k = 4
Application.ScreenUpdating = False
Sheets("Summary").Select
[Code] .........
View 1 Replies
View Related
Feb 16, 2014
I have a Pivot table (see picture) and in another field I want to be able to type in the Month and Year (e.g. January 2012) and return the worst performer of the 8 suppliers. I have been trying to use SMALL in conjunction with INDEX(MATCH(MATCH)) but it doesn't appear to be working.
I am sure there is a simple solution but it is evading me at the moment.
excel.jpg
This is where I am at with the formula. Maybe I can use the IF function somehow?
=INDEX('Pivot Tables'!B19:I19,MATCH(Summary!G3,'Pivot Tables'!A20:A41,0),
MATCH(SMALL('Pivot Tables'!B20:I41,A5),'Pivot Tables'!B20:I41,0))
View 4 Replies
View Related
May 20, 2009
Need in index and match function from a pivot table. I have enclosed an attachment with the sheets that I use. "Data" - contains the data, "Pivot" is the pivot from the data, and "Output sheet" is the sheet where the cells need to be populated.
Basically what I would like to do is to take the pivot and then match the currency, the time indicator and thereby also fill in the value for the matched cell. I have been racking my brain how to do this and I fail miserably.
View 2 Replies
View Related
Jan 8, 2013
My VBA currently reads a weekly updated table and basically dumps it to the end of a masterfile table...however I need to add a small section that will then go back to the beginning and line by line copy one cell in a single column to the same table but to the previous year.
i.e.
G8:G12345 contains this weeks sales which have already been added to the bottom of the masterfile (along with lots of other data)
A8:A12345 contain a barcode
B8:B12345 contain a date
What I now need to do is lookup the barcode and Date -1 year (so 2013 becomes 2012) and write the same data to column AG(n) for 2012. I could use formulas to lookup the data in the Master Table but I am trying to keep this table free of any formulas.
It's the match and index, and write bit I'm struggling with, looping through the inital data is not causing me any problems.
View 6 Replies
View Related
Feb 13, 2013
I regularly use the Index/Match formula. I just noticed, when indexing a table of subtotals, the match doesn't necessarily pull in the subtotal, but rather pulls in the first instance found in the rows that have been subtotaled. Is there a way to index/match the subtotal table to force the match to only view the subtotals, not the rows grouped to create the subtotal? I know I can manually, copy/paste the subtotals to "remove" the grouped data from the index range, but was hoping for an easier solution.
View 3 Replies
View Related
Jul 27, 2014
Look at the image I've attached.
I'm trying to have the table on the right match the first two columns to display the customer name taken from the table on the right.
testtable.jpg‎
View 13 Replies
View Related
Aug 25, 2014
I have a workbook (workbook1) with multiple sheets (sheet a, sheet b, sheet c), all with the same column headings. One of the columns in each sheet of this workbook contains an invoice number.
In a different workbook(workbook2) I need to find the invoice details based on sheets a-c from workbook1.
So, in workbook2 I can input the invoice number in column a and the rest of the details will be pulled through based on whichever sheet (a-c) from workbook1 that the details are in.
Workbook1 is normally closed (from reading others posts, the INDIRECT function might do what I need but would not work with workbook1 closed)
Working with just 1 sheet in workbook 1, the following formula works perfectly:
=INDEX('[workbook1.xlsx]sheet a'!$V:$V,MATCH(A2,'[workbook1.xlsx]sheet a'!$W:$W,0))
How to do the same, but looking in sheet a, b and c at the same time for the answer?
View 2 Replies
View Related
Oct 4, 2013
Excel 2003
I have a table with a header row of scores 1-10 in B4:K4.
In column A I have a list of locations A5:A68. People in each location were asked to score an event between 1 and 10. The count of their scores is under B4:K4, eg Location 1, 3 people scored 1 (entered in B5), none scored 2 (C5), 6 scored 3 (D5) etc through to the score for 10 in K5.
What I am after is the average for each location so that in L5 I can say 'for all the respondents for Location 1, the average was:...
This may be a bit more complicated than it appears as presumably there will be a requirement to multiply the number of respondents by their scores and then ... ?
View 9 Replies
View Related
Jun 9, 2014
Here's my table:
2014 2014 2014 2013 2013 2013
Jan Feb Mar Jan Feb Mar
A 56 63 100 78 25 44
B 48 12 74 32 65 97
C 45 85 96 42 82 73
How will I use index match function to get the data that correspond to each criteria? For example I am looking for the value of A in Mar 2013.
View 4 Replies
View Related
Jan 8, 2010
See my attached spreadsheet. I am trying to get start dates and end dates based upon rates. The first start date is really simple, I just use A2. In F2 should return the last date from A2:A27 where the rate is I2. In E3 The I would like to return the first date in A2:A27 where the rate is G3. and so on. If the rate is 0 then the date can be blank or 1/1/1900.
View 2 Replies
View Related
Dec 22, 2011
i have over 1000 line invoice # with multiple listings....however they have different dollar values for each item
702-0195660 = $10
702-0195660 = $12
702-0195660 = $15
i have an index match in my "missing worksheet" **see attached**
but that is looking up only the first value
702-0195660 = $10
702-0195660 = $10 (should be $12)
702-0195660 = $10 (should be $15)
etc
i have attached the sheet..ive been on the past day!
attached file link below [URL]...
View 9 Replies
View Related
Dec 23, 2011
I'm running a College Football Bowl Game pool. NO money just fun! I've just about got this down except that my Standings area for this years members is not working like I want. There are 24 members and I want them ranked 1-24. This works however, when 2 or more members have the same score....only the first name in the column with that score appears.
Vea, Ray WA955
Braham, LukeHI916
Braham, LukeHI917
Bowers, LarryGA908
This cell comes back with 3 different dupes:
=INDEX(H$1:CB$1,1,MATCH(D87,H$83:CB$83,0)-1)
H1:CB1 are the Names
H83:CB83 are the points for each name
D87 comes this cell : =LARGE(H$83:CB$83,E87)
How can I tell Excel to show all 24 names including the dupes?
View 1 Replies
View Related
Jan 30, 2014
I am trying to retrieve values with INDEX and MATCH. I have column B that contains "i", and "m".
I have formulas for the first occurence of "m"
=(INDEX(NUP!$J:$J,MATCH("m",NUP!$B:$B,0)))
Which will look for the first "m" and output the value in column J that aligns with the "m"
How would I alter this or a new formula for the nth occurrence of "m"?
View 5 Replies
View Related
May 30, 2007
I'm trying to do in Excel 2000 that seemed way easier before I tried to write the formula. Any thoughts would be much appreciated.
I have some data setup more or less like this:
1State DeptJan Feb Mar
2California 50128 31 6
3Utah 20119 3 11
4California 20122 49 22
5New York 301 29 51 15
I'm looking to write a formula to retrieve the numerical value located in the cell for a particular month, across from a particular department number and state - so I can plug it into another spreadsheet.
I tried the following formula for January, but I get an "N/A" error when I hit 'Ctrl+Shift+Enter' to use it...
=INDEX(C2:C5,MATCH(1,("Utah"=A2:A5)*("201"=B2:B5),0))
Can you not use static values in this type of formula?
View 9 Replies
View Related
