I am looking for a formula to number rows in A1:A500
I would like to skip a row when B1:B500 cells are empty
then skip that row and start renumbering from 1
This is what I tried so far
=If(b9>"", countif($B$9:$B9,">"""),"")
I want to count the number of rows in a specific column up to an empty cell and assign this value to a cell. I don't want to count the total number of rows but instead I want the number of the first group of rows.
For example, column A may have cells ranging from row 2 to 10 and then from row 12 to 20, so I only want to count the first group.
The below code counts the total which is not what i need.
Code:
Sub test()
Dim Mycount As Single
Mycount = Application.Count(Range("A:A"))
Cells(1, 4) = Mycount
End Sub
I am writing a macro that will format my table automatically. My table will start with 3 columns all containing data on a 1 to 1 relationship (I.e. there are no empty cells until the end of the file). Initially these are columns "A", "B", and "C" but they shift to columns "B", "C", and "D" during execution of this macro. However, my macro formats the table with seven addtional column headings which will eventually contain data though I need to format them prior to populating them. I know my column range is always going to be ("A:J") but my row range will vary on a weekly basis. That being the case, I need to know how to format the cells in these empty columns up to the number of rows containing data in the existing populated columns. For exapmle I would like the macro to format the table in the following way:
1. Insert new column "A" preserving the data in the existing column "A" shifting it to cloumn "B" and set Cell "A1"'s value = "#" --> I have already coded this portion.
2. Set Cell "A2"'s value = 1 --> I have already coded this portion.
3. Set Cells ("A1:J1")'s values = to desried column header title modifying the three pre-existing column headers while aligning the data to center --> I have already coded this portion.
4. Set all column headers to bold 10pt font and shade the headers row ("A1:J1")--> I have already coded this portion.
5. Set pre defined column widths for columns "A:J". --> I have already coded this portion.............
I have two columns,
Name
Marks
Amit
45
Ankit
54
Aditya
Arun
Ayush
43
Amar
Akas
32
Akshay
21
I want to extract first data from column Name where in the data corresponding to it in Column Marks is blank, and if that is filled, i want the next data to be shown automatically
Create some sort of formula combination or macro that will: Recognise a cell with a value of 1, 2 or 3 in. If 3 is in the cell, the cell to its left will be counted and added to a total. If the cell that has 3 in changes the value is removed from the total. Ive tried lots of methods but i cant figure this one out!
View 6 Replies View RelatedI have built a reporting dashboard to track emplyee efficiency .Within this dashboard i have produced a point scoring league table . I am lookinf for a forula that will automatically work out who my top performers are and arrange them in them in the form of 1st , 2nd ,3rd etc . I believe the answer to lie in the form of a pivot table , perhaps with a macro to populate the data , but would be grateful for come direction
View 3 Replies View RelatedCurrently I have a macro set up that sorts a range.
It sorts numbers first in ascending order and then text comes at the bottom of the sorted range.
Is there any way of reversing this so that text appears first and then numeric values in ascending order below?
I have another problem with this damn address file. Column H and I have data in them that is often mixed. As shown below, I have used A and B below, but its normaly in Column H and I. I would be greatul if some could write a macro to split the data into the two columns.
Rows 2-8 is what Im presented with. I would like them to look like 11-17
Note that the number in row 8 does not match, so is left for manual intervention....
I have a workbook with 30 worksheets. Each sheet has 84 rows of data (start in 15 columns (A to O). I would like to create a summary sheet that only shows the most important data from each sheet.
The summary sheet would have 12 lines of headers and formatted crap at the top.
The Summary sheet header columns would be:
Site (A), Date (B) Health (C), Status (D), Critical (E), Task (F),
Dependencies (G), Owner (H), T-Date (I), Task Date (J), Mitigation Date (I)
The data in the sheets are not in that order, of course.
That
1. puts the name of the sheet I am copying from in column A
2. the deadline date in Column B (that date is always in C10 of each worksheet)
3. and copies Cells from Column A,B,G,H,I,O in any row in which the value in A is not "good" into columns C through H. I would like to paste those rows into the summary sheet. I have code that loops through the sheets and rows in each sheet to find the rows to copy. I can copy cell values directly from the active sheet to the summary sheet, but because I am copying a cell at a time, it takes 7 minutes. Yes I am impatient :)
Here is the code snippet where the copying is done:
Dim sh As Worksheet 'current worksheet
Dim DestSh As Worksheet 'worksheet in which to paste summary
Dim Last As Long
Dim CopyRow As Long 'row to copy
Dim LastCopyRow As Long
[Code] ........
ExitTheSub:
Application.Goto Sheets("KMARollup").Cells(1)
End Sub
I think there must be a way to use ranges to build an array of cell values and paste only once but I am lost here.
I have Two Sheets in same workbokk.
Sheet1 Sheet2
Sheet1 B2 = "any numeric value (whole digit i.e 10 or 55 like) - user input "
Sheet2 Starting point is cell B3.
What need to happen - As soon as user enter number in Sheet1 B2 = any value say, 20 then,
Sheet2.Select
Range("B3").select
suppose i assign value p as,
dim p
sheets("sheet1").select
p = range("B3).value
now here i want to indetify this number, i.e.- 20 (User input) and then as soon as user enter this value,
step 1 - sheet2 get select.
step 2 - from B3 sheet2, by row wise it select next 20 row as well next 20 columns.
for eg.- from B3, the data should select like following,
B3 to U22.
and this selected area highlight with single border only. That's it.Therefore, my main problem is how excel will understand this numeric number ?
I have uploaded a copy of the spreadsheet I am working on and have completed the user forms and coding for march the 1st only, so if you test, please use the options march and then the 1st!
The problems i have is, when I enter a number into a text box and press next page, the numbers fill where i want them to but the cells do not recognise them as numbers, therefore conditional formatting doesnt work! Even if I change the cell properties to numbers, this does not remove the error!
Second problem!! If a user forgetts to enter a value in a box, or they wish to edit just one value, and go back into the user form to change a figure, when they press next page, all the values in the column seem to disappear!
I'd like to take the value from one cel, and reverse the digit order in another cell. Example cell c11 value is 1234, I want to display that value in cell c12 as 4321. Is there a way to do this?
View 9 Replies View RelatedFrequency
Formula to show the final/total a numeric values appears in an adjacent column.
I am currently attempting (I've researched many posts on this), to count /show the final totals a duplicate numeric value appears in one column, in an adjacent column (example below).
I am currently using an array Frequency formula below (courtesy of the board) filled down in column Q. this works well to count the frequency of duplicate numeric values appear on the list.
Formula used in Column Q below
{=IF(C2>=0.1,MAX(FREQUENCY(IF(C2:$C$1000=C2,ROW(C4:$C$1000)),IF(C2:$C$1000C4,ROW(C2:$C$1000),""))))}
However my aim is also to show the final entry of a numeric value in adjacent column R, by displaying text to indicate this. My example below shows “final” in column R
NB: My list is sorted by column C to ensure all numeric values are in ascending order.
Example
Column C Column QColumn R
12567 1 final
15789 1
15789 2
15789 3 final
23456 1
23456 2 final
12678 1 final
18965 1
18965 2 final
In Excel 2007, Windows 7 Home Premium, I am trying to summarise multiple worksheets into one sheet, creating a list in one column in this summary sheet that includes the cell contents from the same cell from each sheet. For example, my first sheet is called KCD183 and I want to list the value from KCD183 Cell A2 in my Summary Cell A2, then show KCD184 Cell A2 in Summary Cell A3 (i.e. the next row down). So my Summary sheet will list all cell A2s from all my sheets, 1 after the other down column A and will continue to add these for any new sheets I add.
I realise that I could just export the spreadsheet to Access and report on it from there, but I don't have the software!
I have text in column A of either "xxx" or "yyy"
I'm looking for a formula so that If
A1: "xxx" then B1: $100
Or if
A1: "yyy" then B1: $150
So when I write "xxx" or "yyy" in a cell of Col A
then $100 or $150 shows up in adjacent cell in Col B automatically.
I will need to sum the numbers later so Col B will need to be in number/accounting format.
I have a sheet in Excel 2004 for Mac that is a patient list with over 2000 patients. I need a rule that will compare values (patient IDs and responsible party ID) in two adjacent cells, if the values are different, to delete the entire row. The goal is to get rid of patients (rows) that are not the responsible party (responsible party ID).
View 3 Replies View RelatedI'm looking for a formula to sum three adjacent cell values in a specific row and then sum up all of the rows.
A B C
1 0 2
3 1 2
4 4 0
For example, the value for the above would return 17 = [(1+0+2)+(3+1+2)+(4+4+0)]
I need to create a repeatable macro/module to help me prepare a spreadsheet for import into Microsoft Access. In each row of the spreadsheet is various information including Order Number, Model, and Serial Number. The problem lies in the Serial Number column, which often contains several Serial Numbers delimited by commas. In order to serve my needs in Access, each Serial Number instance needs to become a new row ( record) wherein all of the information (except for the Serial Number) is the same. It is crucially important that all of the serial numbers are in the same column. (I tried using text to columns as a starting-off point, but seemed to dead end).
Example:
Order#1; Model1; Serial1, Serial2, Serial3
Needs to become:
Order#1; Model1; Serial1
Order#1; Model1; Serial2
Order#1; Model1; Serial3
I have been asked by my supervisor to make a performance review template a little bit more user friendly.
Basically what I have is a drop own list in cells in one column (various cells with the same drop down menu) that you select from either 0-10 in a drop down box.
I have another cell which I want to have a drop down box with text comments that you select from when. Only problem is the comments different dependent on the ranking score you give a person (the number selection in the previously mentioned cell from 0-10). So if you have a score between 9-10 in the cell then the comments box will give you certain comments to choose, 7-8 different comments and so on and so forth.
If I have a list in sheet1, of say 300 names, I need some code, that for a table on sheet2, from A1 to F500 will delete the contents of cells in columns B C and D, IF the value for column A in that row is from the list in sheet1
List of names: sheet1, A1 to A300
Table that needs changing: sheet2, A1:F500
cells to be deleted in columns B C D IF value in A corresponds to the list in Sheet1
I am trying to do is extract the volume size of products in 'ml'
from 10k plus products from a description field cell.
this description field could also contain the weight of the product in grams
so I cannot just do a search for a numeric string ,
it has to be associated with the milli-litres statement .
is is possible to do a sort of ' *ml ' search and then select and copy to another cell ???
I've got a list and I need to check if the adjacent cells for a column are empty or not, and if both are empty then format to a certain color. I have a solution but don't know how to implement it into a format fit for conditional formatting.
I have this in the new rule section of conditional formatting
=IF(AND(ISBLANK(OFFSET(I4,0,-1)),(ISBLANK(OFFSET(I4,0,1))),(ISBLANK(I4)=FALSE)),TRUE,FALSE)
If conditional formatting would allow it I would simply change I4 to the entire range, I am very much confused as to how to format this cell to work with conditional formatting. (I4 is the first cell in the list)
Something else is that if I change I4 to I5 or something then moves all the highlighted cells around, and to top it off the first few cells which should obviously be highlighted aren't, even though the rest of the cells which should be highlighted are.
i have a problem in that i need to generate a random 6 digit number preceeded by an X if the data in column B is either blank or 0. This needs to be filled in if the adjacent cell in column C has data in. i am a moderate macro writer and am finding this part quite challenging.
i am ussing excel 2007.
MATCH(3, A:A, 0) will return the row number with the first number '3' in column A. I need to search for the first empty cell in column A.
View 2 Replies View RelatedI am trying to populate the 2 tables from excel to word. I will be getting the excel file with tables in various sheets. One sheet consist of 2 tables that will be inserted to one word document. So if there are 2 sheets then I will have the tables inserted in the 2 word document. In the excel sheet I have attached, there are 2 sheets with tables in each of them. I have written the code to copy and paste the table to word doc from (general) range A1:G4 (Table 1) and A9:H18 (Table 2) that has empty rows and columns selected. But there are empty rows and columns inserted since the table range is not same sheetwise. I would like get the empty rows and columns deleted in the word table.
Find the attached sample excel sheet and the word documents.
DeleteEmptyRows(Sample).xlsx
Sheet1.doc
Sheet2.doc
I am getting values for my excel sheet from another department excel sheet . everything works fine. If there is no values in the rows in the Department sheet, then i need to hide the rows in my sheet. How to code this in VBA. When they add values to the rows then i should make the rows visble here. Kindy give me a sample of vba code to this or suggest me to solve.
View 9 Replies View Relatedif the active cell is formatted as number and I write
x = Cells(Row, Column).Value
and the cell is empty or blank, x will be set to 0.
How can I determine that the cell is blank and not actually 0 ?
I have a pretty basic spreadsheet which requires a quantity and a unit price (which may change) and then the total. I find that if there is no number in the quantity cell, it reads it as if there is a "1" in there. Can anyone offer assistance on how to get around this without placing zero in that spot?
View 9 Replies View RelatedI would like to select rows of a range (eg A7:D11) but only those rows where the cell in column C is not empty
View 5 Replies View RelatedIn need of a formula which checks rows 1 to 10 for empty cell. If all blank then value = true.
View 2 Replies View Related