Offsetting Entries
Oct 28, 2009I m writing the numbers 1 to 100 in rows of 10. I now need to change the code to offset this, starting at any cell i choose.
if i was to type e.g D6 into cell A1, the numbers would start at D6.
ADVERTISEMENT
Next Offsetting A Row
Oct 12, 2006I have the following code. For some reason the dashes are going into the row below the intended one.....
View 9 Replies View RelatedOffsetting Autofill
Mar 18, 2008I have the following code...
Sub updateDB()
Cells(1, Range("D1").End(xlToRight).Column).EntireColumn.Select
Selection.AutoFill Destination:=Offset(1, 0)
End Sub
Its erroring out on the Autofill line... All i want it to do to finish the code is autofill one column to the right after it selects the column after finding the first blank cell in row A?
Offsetting A Range
Aug 23, 2008Is there code that will offset a range from a single cell?
For example y offset ? =sheets("sheet1").Rage("A1:C25")
Find A Value And Offsetting
Apr 13, 2007I'm trying to run a search and when it finds the value "Bt100" it adds a '1' into the cell on the left. The code which I can't get to work is below
Sub TestModule()
Columns("E:E").Select
Selection.Find(What:="Bt100", After:=ActiveCell, LookIn:=xlFormulas, _
LookAt:=xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, _
MatchCase:=False, SearchFormat:=False).Activat
cl.Offset(0, 1) = 1
End Sub
Offsetting Within A Named Range
Dec 8, 2006I have a large named range which runs from column e to column bx, and is one row tall.
I want to link to this name range, but offset all values by one column. So when i link column f refers to column e.
I have been unable to use the offset function, as this refers to the very edge of the entire named range, not inside it.
Offsetting Values Of Multiple Cells
Jun 5, 2006i am having a list of values thru A1:A10
as under:
10.1
3.2
1.4
2.0
4.0
5.5
3.0
0.5
1.1
0.5
what i want is to retain the rows A4 and A9 alone, after offsetting
A2+A3+A6 against A1 (10.1)
and
A7+A8+A10 against A5 (4.0)
Filling Down With An Offsetting Found Range
Feb 7, 2007I am trying to replace blank cells in a range with the value a found cell. For example, in column A there are blank cells interspersed with cells that have "Account:" in them. For each row that has "Account:" there is a specific account number in column B.
A B
Row
1 Account: 234
2 gobbly
3 gook
4 Account: 456
5 stuff
I would like to fill the blank cells down with the appropriate number (A2 = 234, A3 = 234, A5 = 456). I've tried various integrations of the Fill Down with Macros code and Aaron's Find_Range code but haven't figured it out. The closest I've come is filling all the blanks with the first account number (A2 = A3 = A5 = 234).
Sub FillAccounts()
Dim rRange1 As Range, rRange2 As Range
Dim account As Range
Set rRange1 = Worksheets("test").Range("A2:b" & _
Worksheets("test").Range("b65536").End(xlUp).Row)
On Error Resume Next
Set rRange2 = rRange1.SpecialCells(xlCellTypeBlanks) ...................
Offsetting Macro Cell Linking
Apr 6, 2007I am a beginner with VB but i am wiz when it comes to forumlas but i have been learning how to do VB from your Forum. My Question: I have this code on two seperate option buttons
'First Memebership Option
Private Sub MemFeeFix1_Click()
[$F$7:$Q$7].Value = [$F$7]
End Sub
Private Sub MemFeeVar1_Click()
[$G$7:$Q$7].Value = "0"
End Sub
'Second Memebership Option
Private Sub MemFeeFix2_Click()
[$F$8:$Q$8].Value = [$F$8]
End Sub
Private Sub MemFeeVar2_Click()
[$G$8:$Q$8].Value = "0"
End Sub
Basically i created to buttons; one is a fixed button "MemFeeFix1" that will copy a value into 11 other cells because these values represent months in a year. Ie: Chamber Expense $12 so then i click the option button under the Fixed Column then it copies it into then next 12 months. I couldnt fit my worksheet as it is too big. Anyways i have another button "MemFeeVar1" in the Varable Column and if click variable then it places a "0" into the following 11 months.....
Offsetting Positive And Negative Values Within Each Account
Apr 13, 2014I have a sheet which contains credits and debits for several accounts:
Customer
Amount
ABC
2000
XYZ
3000
XYZ
1000
ABC
1000
ABC
-5000
XYZ
1000
What I need to do is match negative and positive values within each account and highlight them. I have been able to put together a VBA code from google and other forums to match within all rows.
Code:
Sub matchdata()
On Error Resume Next
For Each cl In Columns(10).SpecialCells(2, 1)
Err.Clear
[Code] ........
1. I need to adapt the code so as to do matching within accounts. Example within ABC and XYZ separately.There will be 100s of accounts.
2. If possible, I need to offset a credit (negative value) with multiple debits. Example: ABC -5000 would offset ABC 2000 and ABC 1000. I am not worried about the remaining balance.
Offsetting Category Labels Along A Chart Axis
Jun 9, 2006Has anyone ever succeeded in offsetting category labels in a chart by surpressing the first category label. I am plotting monthly financial data over several years and want to show category labels for the month ends which coincide with quarterly month ends (i.e Mar-06, Jun-06, Sep-06, Dec-06). If I select 2 tick marks between categories I get Jan-06, Apr-06, Jul-06, Oct-6) because my first month and category label is Jan-06. Is there a way to offset displaying the first category label by two tick marks and start with Mar-06 and then go every two tick marks between category labels?
View 3 Replies View RelatedDuplicates Finding Entries In Column A Which Match Any Of Column C Entries
May 7, 2014What I need to do is sort certain entries in longer list (column A, it is in .csv format and needs to be in it so coordinates and names and ID, all sorted with commas) and I have another list (column C) which is shorter list of certain IDs. I googled and tried and got some results for the basic structure but the fuction seems to fail. It doesn't matter how I get that third list done, but there is only one criteria: since the list in column A is really long and those entries need to keep the .csv formatting, the function should copy that info what is in the matching cells.
Let me try to put it simple: .csv cells from column A that have matching ID from column C should be copied to column B (or N).
the function I'm working with right now is
=IF(ISERROR(FIND($C:$C; A1))=TRUE;"0";A1)
Identifying Unique Entries Based On Unique Entries In Another Column?
May 29, 2014I have a list of data and I want to identify the unique entries for both columns but the second column has to unique to the unique values in the first column.
Example List
Fruit
Color
Apple
[Code]....
Sum Only The Last Four Entries
Jan 21, 2009I have a spreadsheet that i update weekly. i need is a formula that will just sum the last four weeks. Example column A rows 1-52 will be updated each week in row 53 i just want the last four weeks to be summed.
View 5 Replies View RelatedSum Only Same Entries
Jul 29, 2006I would like help with a worksheet.
I have a column of Data which is a "material description".
In an adjacent column I have the square meterage of the material.
I would like to total all the square meterage of each material and have it shown in another column.
How can I do this?
I have searched far and wide for an example however I am probably using the wrong terms in my search.
Attached is a sample workbook.
Number Of Entries Above Certain Value
Aug 11, 2014To give this a bit of context, I am looking at running speed of an athlete. I am trying to determine the NUMBER of sprints in a session (aka >15 km/hr for example). To do this, I need to calculate the number of times a speed vs time graph surpasses 15km/h.
For example, using this data:
TimeVelocity
0.212
0.413
0.614
0.815
116
1.217
1.416
1.615
1.814
214
2.212
2.410
2.613
2.814
315
3.216
3.417
3.618
3.817
415
4.214
4.413
4.612
4.812
511
I would calculate two sprints (one beginning at time point 0.8, one beginning at time point 3). I can't work out how to calculate these sprints independently, rather than counting the total number of entries above 15km/hr (11 in this example).
Sum Last 5 Entries From Range
May 16, 2009I have a row of golf scores "I3:X3" they either have a number value or "DNP".
I want to SUM only the last five number values and exclude the rest. The list will get a new entry every week. ie I want to SUM the last 5 most recent scores. There may be 15 or 16 scores or only 3, but I want the last 5 (or less) most recent.
Formula To Add The Entries
Jun 12, 2009If i have the following chart, what formula do i need to add all the entries EXCEPT and entry OS. i have the formula to add the entries but i need to exclude any "OS" entries. Like the following, but i want it to total 6. (minus the 2 OC entries)
=COUNTA(D6:D15)
TS
TS
VR
IS
IS
OS
VR
OS
8 (total)
Remove Entries In Col A That Appear In Col C
Jun 10, 2009Hello all, I was wondering if anyone would be able to help with a macro or even formula that would remove the entries in Col A that appear in Col C. Attached is an example with dummy data, Col D is how the list should be. If a number appears in A but not C then all instances of it should be kept, conversely if it is in C but not A then it does not need to be kept. Most importantly I need to be able to delete those that appear in both by the same number of times they appear in C.
Hope this all makes sense. Please feel free to ask if it is not clear.
Flagging Same Entries
Nov 23, 2006If I have a multiple entry of a product with the same end date against a customer number how could I flag this as something I need to look at?
Eg
Cust number Product Number Expired Date
1000018000 31/12/2006
1000018000 31/12/2006
10000180002811/2006
1000018001 31/12/2006
1001020010 31/12/2006
1021518000 31/12/2006
So in this case the first two would be flag with say “yes” and the others “no” as the customer number, product number and expire date don’t match.
Conditional Entries
Jul 18, 2007I'm trying to evaluate the last 8 entries of a particular column of data that I regularly update (K4:K5000). This data is filled with numbers ranging from about -50 to 50 and will occassionally have a blank entry.
I'd like to evaluate these last 8 entries using a couple of different conditions.
#1 - In column D4:D5000, I have three entry values - X, Y, or Z. It will never be blank. I would like for the Excel to automatically review the last 8 entries of columns K and D and do two things...
a. provide an output of a count of how many X, Y and Z there are for the last 8 entries (format: 4-3-1)
b. provide an output of an average of the values of K for each of X, Y, and Z... (i.e., avg of X = 4.4; avg of Y = 2.1; avg of Z = 10.7)
#2 - Next, I would like to add a third column to the mix (Column C4:C5000 with entries >0 and 0, Y>0, Z>0 there are for the last 8 entries (format: 4-3-1)
b. provide an output of an average of the values of K for each of X>0, Y>0, and Z>0 (i.e., avg of X>0 = 9.4, etc.)
How Many Different Entries For A Certain Criteria
Aug 26, 2008I have been searching a bit in a lot of the already posted threads but without any luck on my problem.
Normaly in excel you always want to count how many entries for a certain criteria.
Now I just want to know how many different entries for a certain criteria.
Example:
in column A1:A10 I have the value "S" -> group
in column B1:B4 I have the value "40" -> material number
in column B5:B8 I have the value "60" -> material number
in column B9:B10 I have the value "70" -> material number
....
....
etc.
So for the group "S" it is listet with total 3 different "material number" (40,60,70)
So my result should be = 3
how should the formula be on counting for the group "S" how many different values are in a defined area (e.g. B1:B10)
I have tried with sumproduct,
Averages For Last 12 Entries
Oct 20, 2008I need to calculate average for last 12 valid entries in a column. I say valid because if there are blanks or zeros in the cell they need to be discounted.
The solution needs to work on percentages as well.
To explain further
Col A Col B
Jan 2007 1
Feb 2007 5
Mar 2007 5
Apr 2007 0
May 2007
Jun 2007 20
Jul 2007 0
Aug 2007
Sep 2007 10
Oct 2007 0
Nov 2007 10
Dec 2007 18
Jan 2008 8
Feb 2008 6
Mar 2008 0
Apr 2008
May 2008 10
Jun 2008 1
The requirement would be to calculate average from Jun 2008 backwards for 12 months where there aren't zero or blank entries.
Sum First 13 Entries Only (formula)
Oct 30, 2008Is it possible to have a formula that sums only the first 13 entries in the range f8:f1006, where the value 13 can change as it is a result of another formula linked in cell f6
View 9 Replies View RelatedVba Sum Up Textbox Entries
Feb 25, 2009I try to sum up values a user enters into 3 different textboxes using the following
cells(1,1) = userform.textbox1.value + userform.textbox2.value + userform.textbox3.value
Let's imagine the user enters "10" into each of the three textboxes, cell a1 should contain 30, however, what i get is 101010.
Display Last 8 Entries Only
Sep 19, 2009I have data on sheet A columns (A:DR) over 400 rows, adding more all the time.
On sheet 2 i would like to display only the last 8 entries (rows) from sheet 1 columns A,B,DO,DQ
So i will end up with 8 rows of data on sheet 2, and 4 columns.
Duplicate Entries
Sep 24, 2009I have been trying a number of different functions!
I have the following countif function that is searching a worksheet (Cases Closed) for the name John in Column O and excluding Solutions in column x. The problem I have is there are duplicates cases in Column C that are being counted two and three times.
Is there anyway to have the following function exclude duplicates records in Column C? Just count unique records in Column C?
=(COUNTIF('Cases Closed'!O:O,"John"))-(COUNTIFS('Cases Closed'!O:O, "John", 'Cases Closed'!X:X, "*Solution*"))
Restricted Entries
Nov 30, 2009I want to put a formula in a sheet.
Suppose In issue column there are few nos but until those nos will not be posted in Return column, those will not be posted again in another day's issue column, similarly until those will not be returned, those nos will not be posted in issue column. But for the first two days it will not work ad those are first time entries.
But this will be continued working on the next sheet for the net month.
28/11/09 29/11/09 30/11/09 Issue Nos. Return Nos. Issue Nos. Return Nos. Issue Nos. Return Nos. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
Deleting Old Entries
Dec 16, 2009The following code works fine if the data is grouped (not necessarily sorted) by column B (but not necessarily by column A), this code will delete the duplicates rows, but retaining the latest entry (by column A) of each name in column B.
Sub DeleteTheOldies()
Dim RowNdx As Long
For RowNdx = Range("B2").End(xlDown).Row To 2 Step -1
If Cells(RowNdx, "B").Value = Cells(RowNdx - 1, "B").Value Then
If Cells(RowNdx, "A").Value
Restrict Entries To 1 Per Row
Nov 16, 2006I am looking for a VBA event(?) code that would erase another cell if I enter a value in another cell, because the criteria is that only one of the cells are to be allowed a value per row.
ex: cells A1, B1, C1
if I enter 1 in cell A1 and then enter 1 in cell C1, I want cell A1 to erase and cell C1 would have the value 1. I am looking to create these sets for 200 rows.