Filling Down With An Offsetting Found Range
Feb 7, 2007
I am trying to replace blank cells in a range with the value a found cell. For example, in column A there are blank cells interspersed with cells that have "Account:" in them. For each row that has "Account:" there is a specific account number in column B.
A B
Row
1 Account: 234
2 gobbly
3 gook
4 Account: 456
5 stuff
I would like to fill the blank cells down with the appropriate number (A2 = 234, A3 = 234, A5 = 456). I've tried various integrations of the Fill Down with Macros code and Aaron's Find_Range code but haven't figured it out. The closest I've come is filling all the blanks with the first account number (A2 = A3 = A5 = 234).
Sub FillAccounts()
Dim rRange1 As Range, rRange2 As Range
Dim account As Range
Set rRange1 = Worksheets("test").Range("A2:b" & _
Worksheets("test").Range("b65536").End(xlUp).Row)
On Error Resume Next
Set rRange2 = rRange1.SpecialCells(xlCellTypeBlanks) ...................
View 9 Replies
ADVERTISEMENT
Aug 23, 2008
Is there code that will offset a range from a single cell?
For example y offset ? =sheets("sheet1").Rage("A1:C25")
View 9 Replies
View Related
Dec 8, 2006
I have a large named range which runs from column e to column bx, and is one row tall.
I want to link to this name range, but offset all values by one column. So when i link column f refers to column e.
I have been unable to use the offset function, as this refers to the very edge of the entire named range, not inside it.
View 9 Replies
View Related
Oct 9, 2013
I have a quick question in relation to filling a range with an array.
When I use the following code:
Code:
Sub justdoit()
s = Array(1, 2, 3)
Range("A1:C1") = s
End Sub
It works fine. but when I try to populate the range in rows instead of colums, the array value stays as the first value.
Code:
Sub justdoit()
s = Array(1, 2, 3)
Range("A1:A3") = s
End Sub
I'm experimenting with arrays and would like to get better at them, but this has me stumped for the moment. How to get the values to work going down, like they do going across.
The above code is a small sample of data, I am wating to replicate with using over 80K lines and cell by cell is too slow.
View 2 Replies
View Related
Apr 18, 2007
Is there a way of filling a range of cells alphabetically?? Probably missing something obvious here!
View 5 Replies
View Related
Dec 7, 2006
I am trying to declare a dynamic sized array. When the code runs, I get 2 errors:
Compile error, array already dimensioned (on the redim line)
when I remove the redim statement I get
error 9 - subscript out of range
I need to create this code to work in excel as well as an application running VBScript.
Dim myarray()
myarray(1) = "a"
myarray(2) = "b"
'etc...
Redim preserve myarray(UBound(myarray))
View 5 Replies
View Related
Oct 12, 2006
I have the following code. For some reason the dashes are going into the row below the intended one.....
View 9 Replies
View Related
Mar 24, 2009
I have a list of 800 fund names that can be any one of 6 types of funds. It is easy to filter the names using the filter function, but I cannot get it to be a filtered list for my dropdown box. The dropdown box should only list those fund names of funds that is of a certain kind. I know I am missing something small.
If the accompanying data is used as an example, I would like a dropdown box with the names of all the I funds.
View 2 Replies
View Related
Jun 16, 2014
I have a button event coded to select and ultimately fill a range of cells with the intent of representing a timeline of payment periods.
Private Sub Timeline_Click()
Dim x As Integer, y As Integer, cell As Range
x = 1
[Code]....
The first row needs to be filled with numbers from 1 to the value of [D20]; E.g. if D20=10 then there would be 10 columns selected then filled 1 through 10.The second row needs to be similarly filled with ascending Y values; E.g. D13 = 4, D20=8: row 2{.5,1.0,1.5...}
View 2 Replies
View Related
Dec 17, 2008
The below formula is in Col F6, how do i get this formula to adjust to data range without manually filling down, my data changes everyday therefore i need the formula to auto fill according to data range.
=IF(ISBLANK(E6),"",Summary!$I$2-E6)
View 9 Replies
View Related
Oct 28, 2009
I m writing the numbers 1 to 100 in rows of 10. I now need to change the code to offset this, starting at any cell i choose.
if i was to type e.g D6 into cell A1, the numbers would start at D6.
View 3 Replies
View Related
Mar 18, 2008
I have the following code...
Sub updateDB()
Cells(1, Range("D1").End(xlToRight).Column).EntireColumn.Select
Selection.AutoFill Destination:=Offset(1, 0)
End Sub
Its erroring out on the Autofill line... All i want it to do to finish the code is autofill one column to the right after it selects the column after finding the first blank cell in row A?
View 9 Replies
View Related
Apr 13, 2007
I'm trying to run a search and when it finds the value "Bt100" it adds a '1' into the cell on the left. The code which I can't get to work is below
Sub TestModule()
Columns("E:E").Select
Selection.Find(What:="Bt100", After:=ActiveCell, LookIn:=xlFormulas, _
LookAt:=xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, _
MatchCase:=False, SearchFormat:=False).Activat
cl.Offset(0, 1) = 1
End Sub
View 5 Replies
View Related
Aug 14, 2014
I have the following:
[C1] My dynamic email subject
[C5:C10] My dynamic email body message
My recipient is always same "burak@burak.com"
Now, I need a VBA code, that will automatically open a blank new outlook email window fill the fixed recepient fill the dynamic subject and body of the message from a range in my workbook.
Then just stop there so that I can attach some different files each time and send myself.
View 5 Replies
View Related
Nov 25, 2008
I recorded one for an autofill series which basically came out as
View 4 Replies
View Related
Jun 5, 2006
i am having a list of values thru A1:A10
as under:
10.1
3.2
1.4
2.0
4.0
5.5
3.0
0.5
1.1
0.5
what i want is to retain the rows A4 and A9 alone, after offsetting
A2+A3+A6 against A1 (10.1)
and
A7+A8+A10 against A5 (4.0)
View 9 Replies
View Related
Apr 6, 2007
I am a beginner with VB but i am wiz when it comes to forumlas but i have been learning how to do VB from your Forum. My Question: I have this code on two seperate option buttons
'First Memebership Option
Private Sub MemFeeFix1_Click()
[$F$7:$Q$7].Value = [$F$7]
End Sub
Private Sub MemFeeVar1_Click()
[$G$7:$Q$7].Value = "0"
End Sub
'Second Memebership Option
Private Sub MemFeeFix2_Click()
[$F$8:$Q$8].Value = [$F$8]
End Sub
Private Sub MemFeeVar2_Click()
[$G$8:$Q$8].Value = "0"
End Sub
Basically i created to buttons; one is a fixed button "MemFeeFix1" that will copy a value into 11 other cells because these values represent months in a year. Ie: Chamber Expense $12 so then i click the option button under the Fixed Column then it copies it into then next 12 months. I couldnt fit my worksheet as it is too big. Anyways i have another button "MemFeeVar1" in the Varable Column and if click variable then it places a "0" into the following 11 months.....
View 2 Replies
View Related
Apr 13, 2014
I have a sheet which contains credits and debits for several accounts:
Customer
Amount
ABC
2000
XYZ
3000
XYZ
1000
ABC
1000
ABC
-5000
XYZ
1000
What I need to do is match negative and positive values within each account and highlight them. I have been able to put together a VBA code from google and other forums to match within all rows.
Code:
Sub matchdata()
On Error Resume Next
For Each cl In Columns(10).SpecialCells(2, 1)
Err.Clear
[Code] ........
1. I need to adapt the code so as to do matching within accounts. Example within ABC and XYZ separately.There will be 100s of accounts.
2. If possible, I need to offset a credit (negative value) with multiple debits. Example: ABC -5000 would offset ABC 2000 and ABC 1000. I am not worried about the remaining balance.
View 1 Replies
View Related
Jun 9, 2006
Has anyone ever succeeded in offsetting category labels in a chart by surpressing the first category label. I am plotting monthly financial data over several years and want to show category labels for the month ends which coincide with quarterly month ends (i.e Mar-06, Jun-06, Sep-06, Dec-06). If I select 2 tick marks between categories I get Jan-06, Apr-06, Jul-06, Oct-6) because my first month and category label is Jan-06. Is there a way to offset displaying the first category label by two tick marks and start with Mar-06 and then go every two tick marks between category labels?
View 3 Replies
View Related
Oct 30, 2008
I have a problem with finding the value in column B that is found within a range eg: <=1 & >=5 and return the corresponding values found in column A. kindly refer to the attached sample for reference.
View 2 Replies
View Related
Oct 11, 2012
I have the following code with uses a cell color to count the number of cells in a range with the same cell color:
Function CountColor (rng As Range, color as Range) As Long
Dim c as Range
Application.Volatile
For Each c In rng
If c.Interior.ColorIndex=color.Interior.ColorIndex Then
CountColor = CountColor +1
End If
Next
End Function
What I would like is instead of just counting and returning the number of cells of the same color, is for the code to return the sum of the values in the cells of the same colors. Cells being evaluated contain numbers from 1 to 300.
View 2 Replies
View Related
Aug 3, 2009
I found a macro that searches a column on each worksheet and copies the searched for value to another worksheet but. I would like to modify this to copy the searched for value and the next 10 cells in the row but I am not able to figure out how to accomplish this. I highlighted in red the piece I would like to modify.
For Each sh In ActiveWorkbook.Worksheets
With sh.range("c10:c10000") 'this determines where to search
For I = LBound(MyArr) To UBound(MyArr)
'If you use LookIn:=xlValues it will also work with a
'formula cell that evaluates to "@"
'Note : I use xlPart in this example and not xlWhole
Set Rng = .Find(What:=MyArr(I), _
After:=.Cells(.Cells.Count), _
LookIn:=xlValues, _
LookAt:=xlWhole, _
SearchOrder:=xlByRows, _
SearchDirection:=xlNext, _
MatchCase:=False)
If Not Rng Is Nothing Then
FirstAddress = Rng.Address
Do
Rng.Copy NewSh.range("d1000000").End(xlUp).Offset(1,0)
Set Rng = .FindNext(Rng)
Loop While Not Rng Is Nothing And Rng.Address FirstAddress
End If
Next I
End With
Next sh
View 9 Replies
View Related
Aug 8, 2006
I am looking for a function that will search a range like 101-199, 200-249, 250-299 and so on.... Say I have a list of numbers like 155, 179, and 210. How can I find out what range they belong to? I am kind of looking at SumIf's but I cant seem to get that to work.
View 3 Replies
View Related
Sep 13, 2007
I have two worksheets. Worksheet One and Worksheet Two. In Worksheet One Column A is a list of numbers. I want to look for all of those numbers in Worksheet 2 Column A. Any of the numbers in Worksheet One Column A that are not found in Workseeht 2 Column A I want to list in Worksheet One Column B. I do not want to compare cell to cell but if any number in the first column is found in any position in the second column.
View 3 Replies
View Related
Feb 4, 2008
What I am trying to do is for example Sheet 1 has a range of names A1:A20 and on sheet 2 on non contigious ranges some values from the range on Sheet 1 shown here and there. What I would like is on a form ListBox1 shows all names used in Sheet2 and on ListBox2 all names that were not used.
View 4 Replies
View Related
Jun 11, 2008
I am trying to open a specific workbook, from several books on a shared drive, based on a value found in a range of cells.
For example, range A3:B3 will contain a number, and cmay also contain some text, but based on the number found in that range, I want to open or activate a particular workbook.
Let me know if further clarification is required.
View 12 Replies
View Related
Nov 28, 2012
I have been trying to write VBA which basicly search for specific value in column A and copy values from that cell to down and two columns next. Select row and columns down after specific value in column A was find.
Like this
A B C
... ... ...
X 100 115
... ... ...
up to last row
I try with VBA below but it do not works.
Sub Select_Rows_GK()
Dim LR As Long, i As Long
LR = Range("A" & Rows.Count).End(xlUp).Row
For i = 1 To LR
If Range("A" & i).Value = "9000" Then
Range("A" & Rows.Count).Offset(0, 1).Select
Do While Not IsEmpty(ActiveCell)
ActiveCell.Offset(0, 1).Select
Loop
Exit For
End If
Next i
End Sub
View 3 Replies
View Related
Mar 13, 2014
I have an Excel Worksheet with 80,000 lines on it. The Columns are arranged thus:
Col A
Col B
Col C
Col D
Col E
Col F
Code
Description
Cost
Rate
Mobile
0.13
1234
Australia Mobile
0.12
Not Mobile
[Code] ........
I am looking for an Excel Formula that will look up Australia & Mobile and then return the highest value of the range of cells it finds that meets that criteria and enters that value in the Rate column next to mobile (F3).
Then I just want a variant of the same formula that will look up Australia but exclude Mobile and then return the highest value of the range of cells it finds that meets that criteria and enters that value in the Rate column next to Not mobile (F4).
View 1 Replies
View Related
May 15, 2007
I have some EXCEL files, titled as "AAA", "BBB", "CCC", so on... Calculated values are placed in Column Z for each file. In order for me to export the files to another software, I would need to create another new EXCEL file (I call it MASS) and place all the calculated values in that new file. In that new file, the titles have to be on Column A and the calculated values on Column B.
For example, File "AAA" has 120 calculated values. In MASS, the word "AAA" has to appear on Column A a number of 120 times and the 120 calculated values are then placed on Column B. Each value must correspond to the word "AAA". The same procedure goes for "BBB", in which the word "BBB" is placed on Column A after the end of "AAA". What I want to achieve is by using a macro that will look up the title of the Active Worksheet and then scan Column A in MASS. If the title matches whatever is in Column A, then the macro will paste the corresponding calculated values onto Column B automatically.
For example, for file "GGG", the macro will look up the word "GGG", scan through Column A in MASS for the start of the word "GGG" and paste the calculated values at the start of Column B. Could I have an idea of how might the macro looks like?
View 9 Replies
View Related
Feb 20, 2008
I recently asked how to locate a max value within a variable range using a macro and got the following responses: Get Maximum Value From Graph / Chart, all of which worked great.
Dim r As Range
Set r = Range("D2", Range("D50"))
Range("K1").Value = Application.WorksheetFunction.Max(r)
Range("Max1") = Application.WorksheetFunction.Max(ActiveChart.SeriesCollection(1).Values)
Start = "D24"
Finish = "D163"
Range(Start, Finish).Select
myrange = Selection.Address
Range("Max2") = Application.WorksheetFunction.Max(Selection)
Now I would like for a different cell to return the time value located one column to the left of the max value found above. I've tried to adapt other offset formulas that I've found to my purposes and haven't been able to make it work. how to do that using the max value as it is found in any of the above three ways
View 4 Replies
View Related