Offsetting A Range

Aug 23, 2008

Is there code that will offset a range from a single cell?
For example y offset ? =sheets("sheet1").Rage("A1:C25")

View 9 Replies


ADVERTISEMENT

Offsetting Within A Named Range

Dec 8, 2006

I have a large named range which runs from column e to column bx, and is one row tall.

I want to link to this name range, but offset all values by one column. So when i link column f refers to column e.

I have been unable to use the offset function, as this refers to the very edge of the entire named range, not inside it.

View 9 Replies View Related

Filling Down With An Offsetting Found Range

Feb 7, 2007

I am trying to replace blank cells in a range with the value a found cell. For example, in column A there are blank cells interspersed with cells that have "Account:" in them. For each row that has "Account:" there is a specific account number in column B.
A B
Row
1 Account: 234
2 gobbly
3 gook
4 Account: 456
5 stuff


I would like to fill the blank cells down with the appropriate number (A2 = 234, A3 = 234, A5 = 456). I've tried various integrations of the Fill Down with Macros code and Aaron's Find_Range code but haven't figured it out. The closest I've come is filling all the blanks with the first account number (A2 = A3 = A5 = 234).


Sub FillAccounts()

Dim rRange1 As Range, rRange2 As Range
Dim account As Range
Set rRange1 = Worksheets("test").Range("A2:b" & _
Worksheets("test").Range("b65536").End(xlUp).Row)
On Error Resume Next
Set rRange2 = rRange1.SpecialCells(xlCellTypeBlanks) ...................

View 9 Replies View Related

Next Offsetting A Row

Oct 12, 2006

I have the following code. For some reason the dashes are going into the row below the intended one.....

View 9 Replies View Related

Offsetting Entries

Oct 28, 2009

I m writing the numbers 1 to 100 in rows of 10. I now need to change the code to offset this, starting at any cell i choose.

if i was to type e.g D6 into cell A1, the numbers would start at D6.

View 3 Replies View Related

Offsetting Autofill

Mar 18, 2008

I have the following code...

Sub updateDB()

Cells(1, Range("D1").End(xlToRight).Column).EntireColumn.Select
Selection.AutoFill Destination:=Offset(1, 0)

End Sub

Its erroring out on the Autofill line... All i want it to do to finish the code is autofill one column to the right after it selects the column after finding the first blank cell in row A?

View 9 Replies View Related

Find A Value And Offsetting

Apr 13, 2007

I'm trying to run a search and when it finds the value "Bt100" it adds a '1' into the cell on the left. The code which I can't get to work is below

Sub TestModule()
Columns("E:E").Select
Selection.Find(What:="Bt100", After:=ActiveCell, LookIn:=xlFormulas, _
LookAt:=xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, _
MatchCase:=False, SearchFormat:=False).Activat
cl.Offset(0, 1) = 1
End Sub

View 5 Replies View Related

Offsetting Values Of Multiple Cells

Jun 5, 2006

i am having a list of values thru A1:A10
as under:

10.1
3.2
1.4
2.0
4.0
5.5
3.0
0.5
1.1
0.5

what i want is to retain the rows A4 and A9 alone, after offsetting

A2+A3+A6 against A1 (10.1)

and

A7+A8+A10 against A5 (4.0)

View 9 Replies View Related

Offsetting Macro Cell Linking

Apr 6, 2007

I am a beginner with VB but i am wiz when it comes to forumlas but i have been learning how to do VB from your Forum. My Question: I have this code on two seperate option buttons

'First Memebership Option
Private Sub MemFeeFix1_Click()
[$F$7:$Q$7].Value = [$F$7]
End Sub
Private Sub MemFeeVar1_Click()
[$G$7:$Q$7].Value = "0"
End Sub
'Second Memebership Option
Private Sub MemFeeFix2_Click()
[$F$8:$Q$8].Value = [$F$8]
End Sub
Private Sub MemFeeVar2_Click()
[$G$8:$Q$8].Value = "0"
End Sub

Basically i created to buttons; one is a fixed button "MemFeeFix1" that will copy a value into 11 other cells because these values represent months in a year. Ie: Chamber Expense $12 so then i click the option button under the Fixed Column then it copies it into then next 12 months. I couldnt fit my worksheet as it is too big. Anyways i have another button "MemFeeVar1" in the Varable Column and if click variable then it places a "0" into the following 11 months.....

View 2 Replies View Related

Offsetting Positive And Negative Values Within Each Account

Apr 13, 2014

I have a sheet which contains credits and debits for several accounts:

Customer
Amount

ABC
2000

XYZ
3000

XYZ
1000

ABC
1000

ABC
-5000

XYZ
1000

What I need to do is match negative and positive values within each account and highlight them. I have been able to put together a VBA code from google and other forums to match within all rows.

Code:
Sub matchdata()
On Error Resume Next

For Each cl In Columns(10).SpecialCells(2, 1)
Err.Clear

[Code] ........

1. I need to adapt the code so as to do matching within accounts. Example within ABC and XYZ separately.There will be 100s of accounts.
2. If possible, I need to offset a credit (negative value) with multiple debits. Example: ABC -5000 would offset ABC 2000 and ABC 1000. I am not worried about the remaining balance.

View 1 Replies View Related

Offsetting Category Labels Along A Chart Axis

Jun 9, 2006

Has anyone ever succeeded in offsetting category labels in a chart by surpressing the first category label. I am plotting monthly financial data over several years and want to show category labels for the month ends which coincide with quarterly month ends (i.e Mar-06, Jun-06, Sep-06, Dec-06). If I select 2 tick marks between categories I get Jan-06, Apr-06, Jul-06, Oct-6) because my first month and category label is Jan-06. Is there a way to offset displaying the first category label by two tick marks and start with Mar-06 and then go every two tick marks between category labels?

View 3 Replies View Related

Sheet1 Row Range Copy To Sheet2 Firs Blank Row In Same Range Paste As Text?

Mar 16, 2013

Trying to assign code to comm. button on User form to copy lets say:

(sheet1, rangeB2:B21) to (sheet2, first blank row rangeB2:B21) and paste it as text value one more question: what to be aware in case of sheets format (merged cells, hidden rows...)

View 4 Replies View Related

Application.inputbox: Range To Copy And Paste The Range's Link And Format To A Different Sheet

Oct 7, 2009

Need a code using application.inputbox to get a range, then use that range to copy and paste the range's link and format to a different sheet? The specifics don't matter, I just can't figure out the syntax. Here is what I have currently:

View 2 Replies View Related

Select A Range That Will Be Changing By Column: Method 'Range' Of Object '_worksheet' Failed

Jan 6, 2010

I'm trying to select a range that will be changing by column. I'm not sure why my syntax isn't working. What I've got:

View 2 Replies View Related

Find Matched Value In A Range For Named Cell Then Copy Range Cells Below

Aug 6, 2013

I need method, using a button, that looks at a cell--say EO2, for example--, looks back on a master worksheet at a specified row and range for a match, then looks at the information from a specified range below the matching cell (The information in this column will either be blank or have an "X" in the cell), and then those rows that do not have an "X" will be hidden in the corresponding rows in the working worksheet. Therefore, if at any time the value in "EO2" ever changes, then it will automatically find a new match and repopulate and hide information as before. About 130 columns will have its own button so that a "query" can be made that depends on the information in a particular cell in that column.

The master worksheet now has matrix of 287 rows and 58 columns. Each row is for an operating procedure and each column shows a job code. An "X" in a coordinate cell for a column/row shows whether that job code is responsible for knowing that operating procedure. So, on the working sheet, an employee's primary job code is given underneath his or her name. When the button is pushed, all the operating procedures not required for a given person will be hidden and only the required ones will remain visible--grouped, if you will. Qualification dates will be easier to see now that the information is consolidated. Whenever someone transfers to a new position, a new code will be inputed on the working sheet. When the button is pushed, a new grouping will result. Any operating instructions that overlap will still have qualification dates, so that information will not need to be transcribed.

View 9 Replies View Related

Excel 2010 :: Return Min Date In Range Where Adjacent Range Is Blank?

Feb 7, 2014

I am working in excel 2010. I have a tracking document that lists free tickets and their expiry dates. In the adjacent columns we track redemption details of these free tickets. What I want to do is return the oldest expiration date from A only if the ticket has not been used (i.e. B is empty). This will allow me to see the date the upcoming tickets about to expire so we can make sure they are used.

A________________B
Expiry Date________Redeemed by
15/08/2014
15/02/2014
15/08/2014________John
15/02/2010________Marc
15/02/2011________Bob

View 4 Replies View Related

SUMIFS Function In 2007 (range To Sum, Range To Evaluate, Evaluation Criterion)

Sep 8, 2009

I’m trying to use the SUMIFS function in Excel 2007 to evaluate the following formula:

{=SUMIFS(range to sum, range to evaluate, evaluation criterion)}

The range to sum is A1:A10, the range (dates) to evaluate are in B1:B10, and the evaluation criterion is that the date is before 31/10/1999.

So my formula looks like this:

{=SUMIFS(A1:A10,B1:B10,”<31/10/1999”)}

This works fine, but how do I refer the 3rd argument in the function to a date in a particular cell rather than typing in the date specifically?

View 2 Replies View Related

Excel 2003 :: Auto-populate Columns From Range 1 And Continue With Range 2

Jan 27, 2013

I am trying to automate a process where a series of numbers would get populated according the range values. Also I am trying to get the automation to pick up the next range when finished with first one and continue with the task.

Here's what I have as start info and where I want to get to.

Sheet1
A
B

1
Ranges

[Code] ......

Excel 2003

View 2 Replies View Related

Macro To Change Range / Action Depending On Worksheet (range To Autofill)

Sep 17, 2013

Currently my Macro should: Turn off any filtersNumber column A from 1 to 1000 (starting in A14)Drags formula from K14-O14 down to last row of data shown in column Athen puts cursor in last empty cell in column B ready for user to enter data

On point 3 - I want the range to be K14-O14 if active worksheet equals "EXCHANGES" but if its on the "VALUATIONS" tab the autofill range should be L14-P14

I have found bits and pieces of macros on the internet and put them together so if my macro below is not the most effective for my needs but here it is in it's current state:

Here is my macro:

Sub AddNewEntry()
'TURNS OFF FILTER IF FINDS ONE ON
Dim wks As Worksheet

[Code]....

View 8 Replies View Related

Function To Sort A Range By The Values In A Specific Column And Return The Range

Mar 25, 2009

I was just recently forced to create my first UDF and after how well it worked I now am very interested in learning more. I am trying to create a function to sort a range by the values in a specific column and return the range. I know this should be really simple but for some reason my code dies whenever it gets to my inner-most loop. I need to use this in a larger function but for now this is my only question. I did find that Excel 2007 has built in Functions for this but my company still uses 2003.

My
Public Function SortRange(rngToSort As Range, valCol As Integer)
Dim Swapper As Variant
Dim i As Integer, _
j As Integer, _
k As Integer

For i = 1 To rngToSort.Rows.Count
For j = 1 To rngToSort.Rows.Count - i
If rngToSort(j + 1, valCol) < rngToSort(j, valCol) Then
For k = 1 To rngToSort.Columns.Count
Swapper = rngToSort(j, k)
rngToSort(j, k) = rngToSort(j + 1, k)
rngToSort(j + 1, k) = Swapper
Next k
End If
Next j
Next i
SortRange = rngToSort
End Function

View 9 Replies View Related

Dynamic Named Range Sort Including Cells Outside Defined Range

Apr 3, 2008

Im sorting a dynamic range as mentioned in this Sorting a Named Range. My range is called drWarningTypes and is defined as:

=OFFSET(DataSource!$A$2,0,0, COUNTA(DataSource!$A:$A)-1,1)

When there is only one cell in the range, then running the following sort function includes A1 also in the search (and also adjoining columns).....

View 9 Replies View Related

VBA To Get Average Of Range Of Cells Based On Named Range In Different Column

Apr 10, 2013

I am trying to calculate some averages. What I have is 3 columns of data in A, B, C, also the "tasks" in A are in named ranges ex: "Award Contract" is a named range - "Task_Award" and "Confirm Updates" is a named range - "Task_Updates". I've attached a sample excel sheet.

I'd like to be able to create a macro to evaluate column A, and for every row in range "Task_Award", give me the average of the corresponding cells in column C and put it in the same range of cells in column B , then, for every row in "Task_Confirm" then give me the average of the same range of cells in column C and place the result in the same range of cells in column B. This is my very first post so I hope I am doing this correctly. I have 77 of these task ranges to evaluate and it will take a long time to do it manually. I'm thinking of a loop function.

View 1 Replies View Related

Search Range In One Sheet - If Any Cell In Range Is Greater Then 0 Copy That Row

Sep 24, 2013

Basically I have three sheets. MAIN, Sheet 1 and Sheet 2

Sheet 1 and 2 are in the same format

A3 down is a list of country names and then B3:I71 contains the data im interested in.

I've been trying to create a function that looks at B3:i71 to see if any cell in that range contains a value greater then $0.00. If it does then the row that contains the cell with a value greater then $0.00 (between col A to K) should be copied to sheet MAIN from cells B3 down. This should ultimatley produce a list of data for any row containing a value greater then $0.00. This process should then be repeated on Sheet 2 and should join the list below sheet 1.

View 3 Replies View Related

Creating Named Range Taking Avg To Date Of Dynamic Range

Jul 15, 2014

I have a column of data that keeps getting new information in it. what i need is a named range that i can use for a chart, first point in the named range will be the first value in the column, second point will be avg. of point 1 and 2, then 3rd point will be avg. of 1,2,3 etc.

View 1 Replies View Related

Dynamic Range For Pivot Table :: Error : Range Is Invalid

Oct 28, 2009

I am trying to get to grips with the dynamic ranges for pivot tables. I have named a range data and in the refers to section put:

=OFFSET(Sheet2!A1,0,0,COUNTA(Sheet2!A:A),COUNTA(Sheet2!1:1))

I was hoping that then when i go to data > Pivot table and it asks for the range i could put =Data but it tells me that the range is invalid. I have attached a copy at the bottom.

View 3 Replies View Related

Flexible Range Formula: Return The Minimum Value From A Column Range

Feb 9, 2010

I need a formula that will return the minimum value from a column range that flexs without having to manually go in an change row references. There is a blank row between each section of data in order to separate info. As an example:....

Need to formula to flex to include rows 5 thru 7 in the first section but expand to include rows 9 thru 13 in the second section. =MIN(A5.A7) works but how do I get next section to flex to =MIN(A9.A13) without manually changing the cell references? There is always a blank row in between the sections to separate.

View 5 Replies View Related

Generate Specific Range Of Unique Random From Main Range

Feb 9, 2014

How to create a sheet to generate Random numbers from 2 specific list of a main list range of 36 Numbers. (List A = Specific 15 numbers, List B = The remaining Numbers from these 36)

Example :

-The Main List Range is from Number 01 to 36
-The Specific random list will be 15 Numbers of these 36

List A-. The Specific 15 Numbers are: 01,02,03,10,11,12,13,20,21,22,23,30,31,32,33
List B-. Remaining Numbers : 04,05,06,07,08,09,14,15,16,17,18,19,24,25,26,27,28,29,34,35,36

So

I need to generate ONE Unique Random Numbers of List A ( 01,02,03,10,11,12,13,20,21,22,23,30,31,32,33)
In Cell A1
In Cell A2
In Cell A3

And from List B, (04,05,06,07,08,09,14,15,16,17,18,19,24,25,26,27,28,29,34,35,36)

I need to do the same thing In
Cell A4
Cell A5
Cell A6

It's possible to have a 6 cells with random but Unique Digits? (not repeated numbers between the 6 cell ??)

View 2 Replies View Related

Copy Multi Cell Range To Destination Workbook Range

Dec 23, 2008

Trying to copy a range from Sender.xls (sheet) Lists backstage
onto Userform.xls (sheet) Behind the Scenes

When trying to copy the values within a multicell range, the destination cell range (same size) becomes blank.

View 2 Replies View Related

Autofill In Macro Range Is Constant How Can I Code To Be A Variable Range?

Feb 19, 2010

I am trying to write a macro which will autofill specific columns. The macro will set the range from the start of my autofill to the end of my autofill as a constant range.

The problem I need to get around is the end of my range can always change each time I run the macro. For instance, the first time I run the macro I may only need to autofill from row 4 to row 15. The next time, I may only need to autofill from row 4 to 23 (because of user updates). How can I make the end of my range not be a constant address but variable?

View 6 Replies View Related

Creating ActiveCell Range And Checking That Range For Specific Character?

Mar 14, 2013

I have a custom email creation template I am merging with another version. The problem I am having is wrapping my head around not only selecting a range that is offset from ActiveCell (column 6-9) but seeing if there is an "x" in that range which is normally blank. My previous attempts identify the "x" but adds the text every time it is found. (Each column is a flag for an email bullet and they can have all four bullets in the email where I only want the text included ONCE if they have ANY bullets included). I use the range because I do not want the text included if none of the bullets are used.

Teh StandHTML then gets used in the body of the email like other HTML items I use

The email is generated using the ActiveCell.Offset to insert special text, emails and routing and has weathered alot of changes over time.

Dim Myrange As Range
Myrange = Range(ActiveCell.Offset(0, 6), ActiveCell.Offset(0, 9)).Select
If Myrange = "x" Then
StandHTML = StandHTML & "Important Text"
End If

View 5 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved