The problem is that the csv file, when accessed by a program, responds with errors. I opened the csv file in notepad and found that empty cells were being copied across creating rows in the text file with commas.
ie. ,,,,
How can I avoid the empty rows being copied? Or, prevent those empty rows having commas in the csv file.
I am using code to filter my 4 sheets Greater then 0 (zero)
After apply above filter now i need to copy multiple rows and paste on another specific workbook for paste i m using below code:
for 1st sheet with the name ("V2")
for 2nd sheet with the name("LV")
For 3rd sheet with the name ("F2")
and 4th sheet with the name("L2")
If I play above code one by one all is going very well,,,,,,or if use in this way all is going very well
But here is a big problem..........if any sheet have no value greater then 0(zero)....then code paste all data... e.g shssts("LV") .Range("C5:C54").Copy but C5:C54 have no data greater then 0(zero) and it will paste on another sheet c5:c54 and again new sheets data will paste below the c54 while c5:c54 have no data.
So I want if any sheet have no data with range is greater then 0(Zero) then skip the copy paste code or use like SpecialCells(xlCellTypeVisible) .
I have data in some of the cells within range A26:A39
These cells are populated via an IF function on another worksheet. Even though the cells appear blank (as in the value returned is ""), there is a formula in these cells. I think it's called formula blank?
I am looking for a way to copy the data from the cells within the range which are not blank (ie: not = "") and paste this data elsewhere on the sheet in a list with no blank spaces in between.
I anticipate that there will be 4 non blank cells within this range.
Ideally I would have data from the nonblank cells copied and pasted to cells A40 A41 A42 A43
I need a macro that will select and copy only cells containing data in columns C to H from one worksheet and paste it to another worksheet in columns B to G.
How do I copy a string from a userform1 textbox called 'Code' to cell range A1 to AX where X is a number that I enter into another textbox called 'lightcount' on userform2?
I am trying to copy a row based on the value of a cell.
I have two sheets in my workbook and on sheet 1, I have a part number and a description. On sheet 2, I have part numbers again, but this time I the description is broken up into the format I need.
What I am trying to do is have excel search on sheet 2 for the part numbers, then copy the information that corresponds to the part number into the correct column.
I have tried using Vlookup. But if the part number in row 2 on sheet 1 match the one in row 8 on sheet 2, this will copy over the data from row 2 whereas I need row 8.
If this would be more doable using VBA, that is fine by me. I haven't been able to figure out anything in VBA or in excel formulas up to this point.
I want to prevent copying and pasting over cells with data validation as this means the validation is overwritten. To get around this I've selected all the cells with data validation and unlocked them, then protected the worksheet with all boxes ticked apart from format cells, columns and rows.
This prevents copy/pasting from overwriting data validation but it doesn't prevent data being pasted in that doesn't meet the validation criteria.
So for example, say -1 is in cell A1, with no data validation. In B1 there is data validation, which doesn't allow negative numbers to be entered. If I copy and paste A1 into B1, the data validation isn't overwritten, but it doesn't stop the non validated data (-1) from being entered! If I then double click on B1 and press enter it recognises the validation criteria is not met.
Macro that can copy cells of data from about twenty five tabbed sheets in the workbook (subject to change) and compile them into one long worksheet (the first tab).
The cells to be copied will be fixed number of columns but variable number of rows. I only need copying of cells in one direction (from the tabbed pages to the compiled list), and I would like to keep the list automatically up to date or have a "refresh" button.
I have a column with data that has one cell populated then the next 4 blank, and so on down the line... I want to copy only the cells with data into a new column without any of the blanks in between (in the new column). I can use the filter feature, but that just screws up the remainder of my spreadsheets other columns. It basically only hides rows, which is not what I need.
Here's some background on what I'm trying to accomplish: I've downloaded daily stock data and want only every 5 days of data starting from the top ("today"). I have tools that can download the data I need in a "weekly" format, but the problem is: it cuts of on Fridays. So basically it's not true weekly data from "today". I just want "today", then 5 trading days back, then 5 days back, etc. etc.
I have a range of cells with data from one day. This range is "C36:K63"
Each day, the prior day's range needs to be copied and pasted into a new range that begins two rows below where the prior day's range ends.
Thus, day two should copy "C36:K63" into a new range: "C65:K92"
As you can tell, the rows will change each day, but the columns will always remain the same.
How can I create a macro that allows a user to copy data from the most recent range and paste it into a new range?
i.e. if there is no data in C65:K92, the macro should copy the data from C36:K63 and paste it into C65:K92. Then, the next day, the macro would copy the data from C65:K92 and paste into C94:K121.
I have a non-contiguous range of cells that contains Values, Formulas, Text or Dates. In some cases a field containing a value could instead contain a formula depending on who is filling out the form and/or what information is known. For example, a cell might contain a value, i.e. Utilities, and I might either know the total ($76,310), or I might need to perform a calculation right in the cell to obtain the total (=54236+9587+12487).
My goal is to be able to copy the information contained in this non-contiguous range to the right some 52 columns (this is a safe temporary storage location) and then be able to copy it back should I need to.
One other problem may be that the source cell might be a merged cell.
Since I cannot determine whether the information is going to be a value or a formula, and I have some text and date formats to copy as well, is there some way to copy this range and keep the data regardless of format?
My Range might look like: (F4, C5, D6:D7, D9, D13:D15, D17:D18, D22:D25, D27:D30)
F4 is a date field, C5 is a merged cell holding text, D6 is the Utilities field described above. The other fields are all formatted as dollars or percentages.
I'm trying to have one cell be the constant place I enter data and then when I hit enter, I'd like the data I entered to be moved down to the cell below it. Then for every new number I enter in that first cell, it would auto shift the previous data down and add the new data to the cell below it.
Basically, I'd like to record data but I dont want to have to scroll to the bottom every time to enter new data since this list will be continuously updated. And I'd like the most recent data entered to be on top.
Then I want to take the top 100 cells in that column, and do a running average of them.
Need aid in copying certain cells with text/labels to clipboard to format a body of email to be sent via Yahoo webmail, so I can paste it where needed.
I did a couple of Excel VBA's back in 2000 or so at last job but haven't seen/used VBA since.
Have a spreadsheet with customer data, (one cust per row) and wish to create something like the following in clipboard (in this example, assuming row 2 is the selected row)...I'll only be sending out one or two of these per day so nothing fancy is needed, just a way to avoid retyping critical data that could get mistyped.
-------------------- A8
Rental details for 2008
Customer Name : A2 Unit nbr : A3 Nbr of weeks : A4 Balance due : A5 --------------------
I'm using Office 2000 still...I've done some searching but results found seem to complicated for my situation or not quite close enough for me to see how to apply it.
I have a long list of values in column F of my worksheet. These values appear in random rows for example: cell F3 is 27, cell F9 is 7, cell F13 is 27, cell F20 is 9 ... The data is not evenly spaced any specific number of rows apart, but there are spaces (rows which are blank in column F).
I would like to put all of these values in column G but without any blank cells, and keep the order the same as well. So using the above example, Id like a way to make cell G1 read 27, G2 read 7, G3 read 27, G4 read 9.
Column F could be a very long column im not sure exactly how long as the data is being put in periodically. Some sort of formula that I could just drag down that would read the values from column F and put them in column G with no places would be ideal.
I have a macro that loops through several workbooks and copies data to one common sheet. Works great with one flaw that I have not been able to resolve. I am using the End Property example below, this works great as long as there are more than one cell with data. With one cell having data this takes you to the bottom of the sheet.
Need code to select from a specific cell to the last cell in that column with data where when the selected cell is the only one with data that would be the only cell selected.
I have a bunch of data (by date) on one worksheet and I want to output results to another worksheet (in the same workbook). I want to be able to alter the rolling period for some financial calculations (thus the rolling period countdown). The code I've written doesn't suck the data from the second worksheet. The first worksheet is where vba is launched from. I've attached all the code.
Private Sub CommandButton1_Click() Dim rowworking As Integer Dim rowoutput As Integer Dim rollingperiodcountdown As Integer Dim Date1 As Date Dim expectedreturn As Single Dim returnwithedc As Single Dim trackingdifference As Single Dim returnwithbetamodulation As Single Dim betamodulationtrackingdifference As Single Dim improvement As Single Dim x As Integer Range("a5:g15000").Select Selection.ClearContents Range("a5").Select For rowoutput = 5 To 500 Worksheets("Rolling Period").Activate For rowworking = 3 To 15000 rollingperiodcountdown = Cells(rowworking, 9).....................
The sheet I have attached has three tabs one is a master sheet another is the production input and the last is an engineering input section, I have coded the production input section to input into cells and email the engineers when they have a new job, the issue i have is with the engineering input.
The engineers can currently go into this sheet and input the job number onto the engineering input section and it will show them the current issue from the master sheet (I have already entered 1002 in it), what I want them to be able to do is input into the white sections below the description and when they click on update entry a macro takes the job number entered into B3 and saves the information onto the mastersheet in the correct column/row which corresponds to the job they are updating.
However the engineers may need to go into the same job several times and update different information therefore the fields need to not paste into the cells if the input sections are blank.
I have a column with data but some rows are empty, i want the empty rows to be filled with exact data from the upper cell so that no row remains empty. How can this be achieved?
I have a workbook ("CaTr") Sheet1 has data ranging ("B2:I41").
There are about 30 cells values (scattered) which needs to be copied in a workbook "CA_Log" in one single next available row .
As soon as the CaTr.sheet1 is filled I want the operator to click a button to trigger this event. Then the sheet1 in workbook CaTr should be saved as "G3" cell value.
Been a while since I've worked with macros within excel and I can't seem to get what I remember being a basic macro to work whatsoever. I have 2 worksheets containing a massive amount of data and need to pull some cells from one into the other when values in 2 columns match.
To better explain, sheet1 has ID numbers in column G spanning for roughly 1700 rows. Sheet 2 has corresponding ID numbers in column EO. The data I need to copy over is in columns EP and EQ on sheet 2.
So I'm trying to build a macro to compare the values in Sheet1_Column_G to those on Sheet2_Column_EO and when a match is found, copy the value in EO and the adjacent entries in columns EP & EQ over into columns X, Y, and Z on sheet 1.
Couldn't get a VB function together to save my life so I tried working with MATCH & INDEX and didn't get very far either. I've included my current function below.
I have a list of data in columns Q R S and i need to in between each line insert the data from columns D E F underneath and then underneath that the data from G H I
so bascially i have a list at the moment like this
Q R S
[Code]....
There is 2 sheets in total , 1 i need to inc 1-1 draw as above and the other sheet to be exc the 1-1 draw . I have attached an example of what i am trying to achieve . can offer as i have had this on excelforum.com with over 150 views and no solution
I have 2 worksheets, A and B. In both worksheets there is common data in column A (account ID). I would like to find a way to return all of the data for the matching row in worksheet B and have it pasted into the matching row in worksheet A.
So in the example below, I am looking for a function that will match on Account ID in both worksheets and then paste the results from Dataset 1, 2 and 3 into the row with the matching Account ID in worksheet A.
Worksheet A Account ID Column to paste matching rows from Worksheet B
1
2
Worksheet B Account ID Dataset 1 Dataset 2 Dataset 3
I have a worksheet (Data) that lists when pupils are in for Nursery sessions during the week. If they are in they have a 3 (hours) by their name in the relevant columns.
In the AM worksheet I now need to pull through a "register" so under each daily heading I need to pull through everyone that has a 3 next to their name under Monday AM / Tuesday AM / Wednesday AM etc. from the Data sheet. However, I don't want it to copy any blank cells. I then need to do the same for the PM sheet.
I need a macro that will examine column A starting at A2 and working its way down copying the data in the first cell (A2) and then delete that row. If the next cells are empty (usually the next 5 cells) it should paste this copied value in each of the empty cells until it comes to the next cell with data in it. At this point it should copy this next value and delete the subsequent row and copy this value in each of the empty cells directly following (again, usually 5) until it finds the next cell that has data in it. At this point, again the whole process begins again repeating it self until it comes to the end where no more data is.
