Open A Pdf File In Macro Code
Aug 11, 2004how to open a pdf file (located: "C:myfile.pdf") in macro code?
View 4 Replies
ADVERTISEMENT
Macro -open The Look In List” And Stop So I Can Pick A File To Open
Oct 18, 2008I want to create a macro that will “open the look in list” and stop so I can pick a file to open. I’ve tried to use “record a macro” and “ctrl-o”, but the record a macro won’t stop until I pick a file or cancel the file list. I also tried to use “o” in the short cut key box
View 5 Replies View RelatedOpen File Code
Sep 11, 2007In the attached file, I have a code to open several files which have the same format, sheet name. The copy and paste the contents to the attached file.
It’s ok to open the first file. But it got problem to open the remaining file. The warning says it can not find the file name even the file exits.
Code To Open A Read Only .xl File
Jan 11, 2007I have a read only excel file which I want to interrogate in another report.
I'm writing some code to open the file but I'm not sure how to get past the password/read-only prompt when opening the file.
My code is:
Workbooks.Open Filename:= "C:Sales2006.xls"
I assume it's possible to write some code to get past the prompt. I have checked the help files which do seem to indicate it's possible to specify a read only property but it doesn't say how.
Code To Open Html File
Apr 22, 2007I need vba code to open a HTML file when i click a button in microsoft excel.
View 2 Replies View RelatedMacro To Open File Saved In Same Location But File Name Changes With Each Date
Feb 8, 2013I do routine tasks every day which involves opening 3 different files and pasting data into my main file. The data is always in the same format, and the 3 files are saved in the same location (3 different folders through). The 3 files are saved each day and the naming convention is constant, with only the date changing. For example, the files are always saved in C:My Documents and the files are called test_05.02.2013.xls. Tomorrow the file will be called test_06.02.2013.xls and so on.
So each day I will be rolling a file forward and I want to bring in the info from each of these files based on the new day.
How to do 1, and I will do the others (because the concept will be the same).
VB Code To Open A File That User Chooses
Mar 11, 2008I'm trying to write a macro that will bring up the "File Open" dialog box, and allow the user to navigate to the directory where the file is located. It won't be the same file every time, and the files will likely have different names.
View 14 Replies View RelatedOpen File And Text Import Code
Nov 26, 2008I am writing some code to open up a file and use the text import as the files are data files. i currently have
View 4 Replies View RelatedVBA Code To Open File Using Variable Date?
May 29, 2014I need a code which will open up a previous days file. I have the code to pick the correct file but I am stuck because the folders are multiple levels down to year then month.
Eg. Folder Name > YYYY > Month
So i need to have a code which can look in to the relevant folder based on the current date and then be able to open the file i need.
I.e. today is 29May so i need the code to open the 2014>May folder.
For 1st day of month I would need it to open last months folder I.e. 01June Open May folder
Open The File Only Based On The Initial Code
Jun 5, 2009I have files saved as a code, then a customer name. I'm trying to write some more code to open the file only based on the initial code.
For example the file name is X090000 TEST
This doesn't work;
Open("V:\\\" & oldFileName & "*" _
& ".doc")
Open File Macro, Error - Incrementing File Name
Feb 2, 2007When it opens the desired file, it increments the file name by 1 each time it is opened (via the macro).
Example;
The first time it is opened you see the file name in the header read "P'Binder L&T Pages" for a moment, then it changes to "P'Binder L&T Pages1"...
I close the file and open it again (via the macro), and see the file name in the header read "P'Binder L&T Pages" for a moment, then it changes to "P'Binder L&T Pages2"...
The file name continues to increment on every opening until the PC is rebooted, then it starts at 1 again.
Sub OpnLTpages()
Dim wb As Workbook
Dim AlreadyOpen As Boolean
AlreadyOpen = False
For Each wb In Workbooks 'Scan open workbooks
If wb.Name = "P'Binder L&T Pages.xls" Then ........................
Excel 2003 :: Macro To Open Folder Then User Selects File Then Macro Continues To Run
Nov 6, 2011I use Excel 2003 at work. I'm looking for some code that will Open a folder and then lets the user to select a file then continues to run the macro.
The file name they select will look similar to this K2271011.504 or K3011111.201
Macro Coding: Add A Code To The Sort And Paste Macro That Will Open The Second Spread Sheet
Jul 21, 2007I am making a spreadsheet that sorts and pastes, but I need to know if I can add a code to the Sort and Paste Macro that will open the second spread sheet needed without just already having it open and using the
Windows("estimate sheet one.xls").Activate
Open File Macro: Same Directory As Macro Workbook
Nov 17, 2006I created folder on my desktop to hold various documents. I have master excel document which contains forms and command buttons that open documents from same folder. Is there a way to change code instead of having full file path to specify current directory. I'm worried that if I move this folder to another location then my open file button will not work since location is changed.
Also when I open with command button word document, I have a button on word document to close. I can close document but word application is still active. Can I close word application with the document at the sam time. This is the code I'm using: "ActiveWindow.Close"
Open File With Macro
Dec 29, 2007I was wondering what the code is to open a file (already specified in macro) when you run a macro
View 3 Replies View RelatedMacro Needs To Run Each Time I Open The File
Oct 21, 2008I need a Macro to run when a file is opened through a macro on another workbook. The code I have for the workbook that open's the file is:
PHP
Sub opensaveclose()
Application.Workbooks.Open ("C:...testfile_revised.xls")
Sheets("Call Report").Select
End Sub
Private Sub runmacro()
Application.Run ("RefreshStats")
End Sub
Autostart Macro When Open The File
Mar 12, 2009how to produce an autostart macro, so when i open the excel file it will go straight to a specific worksheet, or is there another easier way of doing this ?
View 2 Replies View RelatedMacro That Will Open The File Path
Dec 10, 2008hi, i need a macro that will open the below file path, and when i select the file i would like the macro to copy the active sheet from the source file being opened from range A2:L10000 and then paste special values to destination CELL A16 of the activesheet of the workbook.
I would like the date format for the below to be generic so it will apply for all months and years.
S:RECSBANKRECNominees200812-2008
Macro: Check If File Open
Dec 19, 2006I have a form in Access with a button that opens an Excel file. I think I've seen vba code to tell if a specific Excel file is open already. What I'm looking for is a way to tell if an Excel file is already open when you don't know the filename of the Excel file. Is that possible? Or at the very least is there a way to be able to tell if Excel is already open?
View 4 Replies View RelatedFile Open Dialogue Box To Open In (Directory Of Tool File)
May 31, 2013I have a tool file which contains Excel VBA codes. When I click button it asks to select a file. I want that anytime I click the button the dialogue box should open in the folder containg the tool.,
View 1 Replies View RelatedVBA Code To Run Macro In All Open Workbooks
Mar 12, 2014I have a macro to get copy of sheet named "Doc Info" from workbook File 1 to active workbook.
I could do it for one file on any active workbook.
But what I would require is, upon executing this macro , i want this macro to get executed in all open workbooks( could be any numbers ).
I want to move copy of sheet from File 1 to all open workbooks ( which i am doing it manualy for every file )
All these open workbooks could be from any folder , wont be in same folder.
So logic is to execute my macro apply in all open workbooks in my computer.
Below is the code and i have attached file for test
HTML Code:Â
Sub Copysheet()
Dim wSht As Worksheet
Dim wBk As Workbook
Dim wBk1 As Workbook
Set wBk = ActiveWorkbook 'Workbooks("File 2.xls")
Set wBk1 = Workbooks("File 1.xlsm")
Set wSht = wBk1.Sheets("Doc Info")
wSht.Copy before:=wBk.Sheets(1)
End Sub
Macro Code - Open As Read Only
Jan 21, 2009below code
Sub Collect_OS_Data()
With Application
.ScreenUpdating = False
.EnableEvents = False
End With
Dim fso As Object, fld As Object, fil As Object, fldPath As String, wbSrc As Workbook, wbCur As Workbook
fldPath = "Q:PublicPAYMENTS Q&RREPORTSSuspense Activity BUSINESSOngoing - Suspense BUSINESS - Activity Reports"
Set wbCur = ActiveWorkbook
ActiveSheet.Name = "Raw Data"
Set fso = CreateObject("Scripting.FileSystemObject")
Set fld = fso.getfolder(fldPath)
On Error GoTo ErrHandler
For Each fil In fld.Files
This opens all spreadsheets within a folder and takes the data i require out of each one and pastes to a new workbook, however the files are password protected. Can you add into the code to open each spreadsheet as a readonly copy and paste data and then close without a save prompt or denying the save prompt ?
Open Web Page Via Macro Code
Feb 24, 2008I have been looking for some VBA code that simple, when it runs, opens a browser and a specific, hard coded website. Is this possible in VBA?
View 2 Replies View RelatedOpen Web Page Macro Code
Mar 5, 2008I am currently using the following code in order to open a web page by clicking a button:
Private Sub Timetable18_Click()
ActiveWorkbook.FollowHyperlink Address:="http://journeyplanner.tfl.gov.uk/user/AHF/JP15__00006e8e.pdf"
NewWindow = True
End Sub
However, when this is executed it returns the following error:
Run-time error '-2146697210 (800c0006)':
Method 'FollowHyperlink' of object '_Workbook' failed
Clearly, I'm doing something wrong. I wondered if it had anything to do with the fact that the webpage I'm trying to open is a pdf and not html or similar, but this doesn't appear to be the issue.
Open/Add New Workbook Macro Code
May 12, 2008I am trying to write code to open a new (blank) workbook while in an existing workbook (I am then going to pass data between the two which is easy). When I try to record the code to get the syntax for opening a new workbook it will not record any code. I also need to name the new workbook based on text in a cell in the existing workbook. I just saw before posting this that the code;
workbooks.add
will open a new workbook now I just need to name the new workbook based on text in my existing workbook.
Macro To Close One Excel File And Open Another?
Jul 18, 2014I have created several excel files as I cannot open them all at once since they are too large. So I have to open one excel file whilst closing another.
part1
part2
part3
part4
part5
I want a macro that opens the excel file part 1 and part 2. Then it should close part 1 and after closing part 1 it should open part 3. Once part 3 is open, part 2 should be closed and when part 2 is closed part 4 should open. When part 4 is open, then part 3 should be closed and part 5 should open.
Error In Macro That Checks If The File Is Already Open
Mar 26, 2009I thought that I had this working completely, but the test to see if the "file is already open" isn't working.
Something is wrong with my example.
I have marked in the code where the problem is. Everything else works. It's marked as such: ...
Create A Border Macro When Open The File
Jul 26, 2009I have recorded a macro which will create the border for me when the file is opened, but it turned out too long. if someone can show me how to reduce the codeing. I have the attached file.
Range A5 to E20 thin Border all sides and thick border allround (16 rows)
Range A21 to E36 thin border all sides and thick border allround (16 rows)
end range is A356.
How Do I Get A Certain Macro To Run Anytime I Open Any Excel File
Sep 3, 2009I want to put in an if-then statement in a macro that will check to what kind of report i open so it will automatically know what to do with it. Where do I put that macro? I tried it in auto_open in my personal.xlsb file but it stops before the file actually opens.
View 9 Replies View RelatedVBA Macro To Find Specific File & Open
Nov 16, 2008I've got a VBA macro set up in one Master excel file that manipulates a number of other files. Both the Master and the other files are all in a folder which is currently called C:Documents and SettingsusernameDesktopPipeline and my VBA script has this defined as the filepath and works exactly as I need it to. I will be moving the folder "Pipeline" to a shared drive on my server so my staff can access it, and will be sending it to colleagues who will be installing it on their own servers so they and their staff can use it. Is there a way to amend the code so that the VBA in the Master file looks in the folder in which it is locate, "Pipeline", no matter what the filepath leading to the "Pipeline" folder is?
View 8 Replies View Related