I have a form in Access with a button that opens an Excel file. I think I've seen vba code to tell if a specific Excel file is open already. What I'm looking for is a way to tell if an Excel file is already open when you don't know the filename of the Excel file. Is that possible? Or at the very least is there a way to be able to tell if Excel is already open?
View 4 Replies
I have two workbooks. One is a no-nonsense form interface that my bosses will use to enter safety information. I'll call this workbook "Form". This file is stored locally on each of their computers. The other workbook is stored on a common drive. I'll call it "Master".
When my bosses fill out the Form and click "Submit", the Master file is opened, and certain cells are populated based on information entered in the Form. This is the code I am using to make this happen:
I want to create something like this: macro checking if file aaa.csv isn't open, if it is macro should stop and show message box "Close aaa.csv", and if file isn't open it should continue to work.
The file aaa.csv is stored in the same folder as workbook with my macro.
I have an application that requires users to download a file from a location that is then imported at their execution into the application. I've done my best to counsel users to download the file to their desktop (for ease of locating) and to stick with a standard filename so that there are no errors. Some of these people just don't take direction well, will save the file wherever, or save the name inappropratly, or worse, open up multiple copies of the same file corrupting the name: ie: FileName.xls, FileName.xls(1), FileName1.
View 5 Replies View RelatedI am just wondering if there is a way of checking if the workbook that is currently open is the only one that is open, as I have been asked to make my code exit the application if this is the case rather that just close that one file.
View 6 Replies View Relatedway to find out if an Excel file is open from PowerPoint. I know there are ways to open the Excel file, but you can get a warning message if the file is already open. So I want to check to see if it is open first before I go to the code that opens it.
View 9 Replies View RelatedI have a command that opens up another workbook. This workbook is sometimes open on another computer, so that the book opens up on my computer in write-protected mode (shows in the top of the window). Usually, when opening other books through the Excel functionality, a message box appears if the file is open and warns that the file is in use by another user. However, with the code I have at the moment, this is not the case when I try to open with my command. See code below:
Private Sub cmdOpenBook_Click()
'Open book
ChDir "I:DevelopmentSpecialUtvikling"
Workbooks.Open Filename:= _
"I:DevelopmentSpecialUtviklingJointApp.xls"
End Sub
Is there any way of displaying a msgbox warning when opening another file through VBA?
I have a program that opens an excel-workbook, I first check whether the file is opened by another user(open for read-write). This works fine, but I'd like to know which user has the file open with VBa code. ex.
workbooks.open ....
if open
then msgbox " Book opened by user"
end if
So it's the same as you open an excel(with your windows explorer) on a network and you get the message that the file is already opened by the user....
the Data Grabs and pastes perfectly now but the Macro copies the data from the open file - the problem is that every day the filename (eg stats_01_02) changes according to the date so what I want to know is how to have the macro copy the data from an open file using just the first part of the filename.
View 5 Replies View RelatedI did a macro on my mac to transfer a sheet from one workbook to another worbook. It works very well when the destination workbook is open. Therefore I wanted to add some piece of code to check if the destination workbook is open. If not then I wanted the macro to open it before tranfering the sheet. Here is the code I´m using for tranfering the sheet
Sub Transfer_Sluttet()
If ActiveSheet.Index <> Sheets.Count Then
Application.DisplayAlerts = False
Set ws = ActiveSheet
Sheets(ws.Index + 1).Delete
ws.Move Before:=Workbooks("Sluttet.xls").Sheets("sheet2")
'Moves active sheet to beginning of named workbook.
'Replace Test.xls with the full name of the target workbook you want.
Application.DisplayAlerts = True
End If
End Sub
This is the type of macro I useually use on my pc to check if a workbook is open and if not then open it
If IsWorkbookOpened("Filename.xls", "C:Documents and ..................
I want to create a macro that will “open the look in list” and stop so I can pick a file to open. I’ve tried to use “record a macro” and “ctrl-o”, but the record a macro won’t stop until I pick a file or cancel the file list. I also tried to use “o” in the short cut key box
View 5 Replies View RelatedI am looking to check if its open, if it is, then copy the row, if not, then close it.
I am still new to vb, so learning as I go, but looked at many other posts, and there are so many ways i have seen to open one, I'm not sure which is the best, and none that I have seen show me if they check if its open.
I do routine tasks every day which involves opening 3 different files and pasting data into my main file. The data is always in the same format, and the 3 files are saved in the same location (3 different folders through). The 3 files are saved each day and the naming convention is constant, with only the date changing. For example, the files are always saved in C:My Documents and the files are called test_05.02.2013.xls. Tomorrow the file will be called test_06.02.2013.xls and so on.
So each day I will be rolling a file forward and I want to bring in the info from each of these files based on the new day.
How to do 1, and I will do the others (because the concept will be the same).
When it opens the desired file, it increments the file name by 1 each time it is opened (via the macro).
Example;
The first time it is opened you see the file name in the header read "P'Binder L&T Pages" for a moment, then it changes to "P'Binder L&T Pages1"...
I close the file and open it again (via the macro), and see the file name in the header read "P'Binder L&T Pages" for a moment, then it changes to "P'Binder L&T Pages2"...
The file name continues to increment on every opening until the PC is rebooted, then it starts at 1 again.
Sub OpnLTpages()
Dim wb As Workbook
Dim AlreadyOpen As Boolean
AlreadyOpen = False
For Each wb In Workbooks 'Scan open workbooks
If wb.Name = "P'Binder L&T Pages.xls" Then ........................
I use Excel 2003 at work. I'm looking for some code that will Open a folder and then lets the user to select a file then continues to run the macro.
The file name they select will look similar to this K2271011.504 or K3011111.201
The other day, I had posted a macro, which copies one of the sheets from a workbook, on to a blank sheet, and then saves it with a name obtained from the value of cell E7. I required certain modifications to it, before I could implement it.
You will find it here and the code looks like this:
I have a spreadsheet with a macro that saves a backup s/s to a particular folder, but the problem I have need the macro to check the filepath is that of the original s/s before running.
Its so that when people take copies of the main s/s and save them to their desktop I dont want the copies being saved in the backup folder
macro is below
Private Sub Workbook_BeforeClose(Cancel As Boolean)
If ActiveWorkbook.ReadOnly Then Exit Sub
If MsgBox("Do You Want To Save A Backup?", vbYesNo) = vbNo Then Exit Sub
Dim fso As Object
Dim objFiles As Object
Dim myWkBk As String
Dim myFName As String
Dim BkUpDir As String
Dim CountFiles As Integer
Dim mydate As Double
BkUpDir = "k:singstatappealsappeals trackerBackups"
Set fso = CreateObject("Scripting.FileSystemObject")
Set objFiles = fso.GetFolder(BkUpDir).Files
On Error Resume Next
'the actual counting of files takes place here.
If Err.Number 0 Then
CountFiles = 0
Else
CountFiles = objFiles.Count
End If
If CountFiles > 4 Then
MsgBox "You have " & CountFiles & " saved workbooks. Perhaps you should delete some?"
End If
mydate = Format(Now(), "ddmmyy")
myWkBk = ActiveWorkbook.Name
myFName = ActiveWorkbook.FullName
fso.CopyFile myFName, BkUpDir & mydate & myWkBk
End Sub
I created folder on my desktop to hold various documents. I have master excel document which contains forms and command buttons that open documents from same folder. Is there a way to change code instead of having full file path to specify current directory. I'm worried that if I move this folder to another location then my open file button will not work since location is changed.
Also when I open with command button word document, I have a button on word document to close. I can close document but word application is still active. Can I close word application with the document at the sam time. This is the code I'm using: "ActiveWindow.Close"
I was wondering what the code is to open a file (already specified in macro) when you run a macro
View 3 Replies View RelatedI need a Macro to run when a file is opened through a macro on another workbook. The code I have for the workbook that open's the file is:
PHP
Sub opensaveclose()
Application.Workbooks.Open ("C:...testfile_revised.xls")
Sheets("Call Report").Select
End Sub
Private Sub runmacro()
Application.Run ("RefreshStats")
End Sub
how to produce an autostart macro, so when i open the excel file it will go straight to a specific worksheet, or is there another easier way of doing this ?
View 2 Replies View Relatedhi, i need a macro that will open the below file path, and when i select the file i would like the macro to copy the active sheet from the source file being opened from range A2:L10000 and then paste special values to destination CELL A16 of the activesheet of the workbook.
I would like the date format for the below to be generic so it will apply for all months and years.
S:RECSBANKRECNominees200812-2008
how to open a pdf file (located: "C:myfile.pdf") in macro code?
View 4 Replies View RelatedI have a tool file which contains Excel VBA codes. When I click button it asks to select a file. I want that anytime I click the button the dialogue box should open in the folder containg the tool.,
View 1 Replies View RelatedI have created several excel files as I cannot open them all at once since they are too large. So I have to open one excel file whilst closing another.
part1
part2
part3
part4
part5
I want a macro that opens the excel file part 1 and part 2. Then it should close part 1 and after closing part 1 it should open part 3. Once part 3 is open, part 2 should be closed and when part 2 is closed part 4 should open. When part 4 is open, then part 3 should be closed and part 5 should open.
I thought that I had this working completely, but the test to see if the "file is already open" isn't working.
Something is wrong with my example.
I have marked in the code where the problem is. Everything else works. It's marked as such: ...
I have recorded a macro which will create the border for me when the file is opened, but it turned out too long. if someone can show me how to reduce the codeing. I have the attached file.
Range A5 to E20 thin Border all sides and thick border allround (16 rows)
Range A21 to E36 thin border all sides and thick border allround (16 rows)
end range is A356.
I want to put in an if-then statement in a macro that will check to what kind of report i open so it will automatically know what to do with it. Where do I put that macro? I tried it in auto_open in my personal.xlsb file but it stops before the file actually opens.
View 9 Replies View RelatedI've got a VBA macro set up in one Master excel file that manipulates a number of other files. Both the Master and the other files are all in a folder which is currently called C:Documents and SettingsusernameDesktopPipeline and my VBA script has this defined as the filepath and works exactly as I need it to. I will be moving the folder "Pipeline" to a shared drive on my server so my staff can access it, and will be sending it to colleagues who will be installing it on their own servers so they and their staff can use it. Is there a way to amend the code so that the VBA in the Master file looks in the folder in which it is locate, "Pipeline", no matter what the filepath leading to the "Pipeline" folder is?
View 8 Replies View Related1. Open a text file from a directory on my computer
2. Feed the data into a Excel spreadsheet
3. Parse the text from the text file into columns
an example of some of the stuff in the text file (its all fake btw )
192.168.1.216,,,
J2MARTIN,20/08/1999,8:57:27 a.m.,
372,http://www.microsoft.com/isapi/redir.dll?,,
192.168.1.216,,,
J2MARTIN,20/08/1999,8:57:27 a.m.,
326,http://home.microsoft.com/,,
192.168.1.216,,,
J2MARTIN,20/08/1999,8:57:29 a.m.,
37014,http://www.msn.com/default.asp?,,
Is it possible to feed all this data into excel into seperate rows and then start parsing it into columns of
IP Username Date Time KbUsage URL
