Option Button Selection Changes Value Of Text Boxes
Oct 2, 2012
I have a userform that has 3 option buttons (1, 2 & 3) each of these option buttons have a Label next to them, Label (1, 2,& 3) next to that I have 3 textboxes that are formatted for currency. Each label represents a dollar value $10.00, $20.00 & $30.00
OptionButtom Label TextBox
1 Month Member x $10.00 $.00
2 Month Member x $20.00 $.00
3 Month Member x$30.00 $.00
When one of the OptionButtons is selected I want the corresponding label dollar value to be multiplied by the OptionButton and that value placed in the TextBox
i.e. if OptionButton 1 is select the TextBox would have a value of $10.00
if OptionButton 2 is selected then TextBox would have a value of $40.00
if OptionButton 3 is selected then TextBox would have a value of $90.00
Lastly, if 1 Option Button is selected and then changed to another of the 2 buttons, the TextBox value would reset to $.00
I have a workbook with 2 sheets. Sheet1 has a textbox and 2 option buttons named "north"and "south", and 2 command buttons named "send"and "retrieve". Also a lot of other boxes, but they're not relevant.
I enter a unique number in the textbox, press one of the option buttons and press "send". All data is now written in sheet2 in one row.
this all works ok.
Sometimes I need to change some data, so I enter the number in the textbox and press "retrieve". I get all the data back on sheet1, except the option buttons don't change correct. If on sheet2 the value = "north" I would like optionbutton1 to have the black dot and if the value="south" optionbutton2 should have the dot.
Now it's like they are on strike. they just don't react folowing the value of sheet2,collumn G, row "x".
I have done much searching, found some relevant, similar postings, but I have not been able to make it work for my code. I want to have multiple option buttons and have a macro determine which one is selected. One similar posting had macros run from the clicking on the option button, but I want the macro to determine which is clicked and then return some functions. From my research...this is my code.
Sub temp() If OptionButton1.Value = True Then Range("C1").Select Selection = "OB1" Else 'assuming two buttons and first is false Range("C1").Select Selection = "OB2" End If End Sub
This gives me an "Object Required" error on the first line of the code.
How do I get the listboxes to pre-populate based on the Userid and Option Button selection? Furthermore, write back to the correct cell once the selection has been made?
How can I get the combobox to remove blanks in the Userid? (if each cell in row2 has to be populated then so be it)
I want to populate the values of two textboxes that we will call TextBox5 and TextBox6 from columns W and X of a spreadsheet called "PowerAnalysis" when a selection is made form ComboBox5.
The ComboBox5 works perfectly now. I just need it to populate the other two text boxes.
All the data resides in the same row on the same sheet of PowerAnalysis when the selection is made in ComboBox5.
I hope I have been able to give a clear picture of what I am wanting to do.
If the user selects French (radio button selection), I want to swap out the existing English text for French and vice versa. One large text box with several paragraphs. Can Excel do this?
I have a form that contains a group box with option buttons, and for clarity's sake, next to it another group box, also with option buttons. So, I can choose 1 option in one box and another option in the other box at the same time. I'm sure you heard me coming a mile away, but here it goes anyway: how can I link the two group boxes (and option buttons) so I would only be able to choose 1 option out of both boxes?
I have a form with at about 1200 checkboxes and I need to make them behave as radio buttons. What I mean is that just one box can be selected in a group of boxes.
Lets say i want to group all 1200 boxes in 400 groups, with 3 check boxes in every group. I want user to be able to select just one check box in every group.
I have a workbook with various "in cell" validation selection boxes.
All worked well, but now the width of de dropdownbox is very big, stretching over several cells. The cell width is 70 pixels, but the dropdown box is 500 width.
I tried new validation, but no matter where I place a validation of what list I use in validation the width of the dropdown is always over 500 pixels? How to change that?
I want to set up a cell so that when the cursor is on the cell a drop down option appears allowing the selection of a yes or no to be shown in the cell. What's this called and how do I set it up?
I have a group of 3 Option Buttons that are grouped by a Group Box. I added another Option Button and placed it in the third position, moving the button that was originally third to the bottom. When I select the fourth button (that was originally the third of three) it still returns a 3 in the linked cell, and when the new button (placed in the third position) is selected, the linked cell returns a 4. How do I change the order that the linked cell sees? In the attached spreadsheet, the Group Box in question is the Pricing Method on the Tow worksheet.
I have 3 input boxes on my sheet. They are T10, T12, T14. Right now I click with mouse, but is it a way that I can use tab key to jump from one box to another?
I'm trying to replace a bunch of checkboxes on a sheet with a bunch of Form Control Option Buttons. The problem I'm having is every option button I add seems to be grouped with all of the rest of my option buttons. If I add buttons 1 & 2, I need those 2 grouped together, and when I add 3 & 4, I need those grouped together. Currently it's grouping all 4 buttons together so 1 - 4 are linked, but I need 1 & 2 linked together, and 3 & 4 linked together. I've tried grouping, but it still doesn't function how it ought to.
I have a worksheet where the user selects between two option controls, which are mutually exclusive. when they toggle an option, a user form pops up, depending on which option they selected, and askes them for a number, which is used in a calculation elsewhere in the page. The user form has a cancel button, in case they decide to back out. If they cancel, I want the option buttons to reset back to their original state.
The problem I'm having is that when I code it, if you select cancel on the user form, it causes the option to revert back to it's previous state, but that triggers the selection of the option again, which pops up the form, making a neverending loop! Is there a better way to do this? I tried it with a toggle button, with the same results.
I have user form with 5 OptionButtons in one group called Group1 and another 5 in Group2.
I need that those 5 OB in each group had value from 1 to 5 and then user selects one OB it will inset that value (not TRUE or FALSE) into cell and same with Group2.
Private Sub CommandButton1_Click() Cells(ActiveCell.Row, "E").Value = Need value of Group1 Cells(ActiveCell.Row, "D").Value = Need value of Group2 End Sub
I am looking for Multiple IF formula that linked with options button.
If D10=True 16+(C12*2.10) If D11=True 14+(C12*1.6) If D12=True 12+(C12*1.3) If D13=True 10+(C12*1.15) If D14=True 16+(C12*2.10) From D10 to D14, there is always one True and others are false.
Working on a project for a client, and I have two option buttons set up on the spreadsheet, grouped together with a frame and linked to the same cell. Working on the sheet on my computer, the button on the left gives me a value of "1" and the button on the right is "2". When I email the spreadsheet to my client, the buttons reorder themselves, so that the button on the left gives him a value of "2" and the button on the right is "1". Is there a way to prevent this?
I am trying to make an option button visible only when a cell has a value, I understand that this will have to be done in VBA. So I have a value in C10 on page "Edit" and I only want my option buttons to appear when this cell has a value.
In ThisWorkbook Userform2 is triggered upon a double click
Private Sub Workbook_SheetBeforeDoubleClick(ByVal Sh As Object, ByVal Target As Range, Cancel As Boolean)
UserForm2.Show End Sub
Userform2 has Frame1 (Option Buttons 1-6) and Frame2 (Option Buttons 7-12)
Private Sub OptionButton1_Click()
Call ProjectBuildings Range("A1").Select End Sub
Private Sub OptionButton10_Click()
Call BondIndustrial Range("A1").Select
End Sub
The user can click away and things work great. The macros that are triggered search a number of Workbooks and individual Worksheets looking to select either of two (hence the two Frames) specific items.
If the user clicks any Option Button in Frame 1 (works) then any Option Button in Frame 2 (works) then goes back to the same Option Button in Frame 1 (nothing) I have a problem.
How do I clear the first Option Button in Frame 1 after the user selects another Option Button in Frame 2?
I am trying to create a command button in Microsoft Excel (Office 2000) that enables me to reset the check box status for a worksheet from checked to unchecked. The worksheet contains approximately 50 check boxes and is meant to be reused. Is this possible? If so, how can I program it to do so?
I am working on a grading sheet for our company. I would like users to choose from an option button choice (A, B, C, D, F) for each grading category and I would like to write that to a sheet that corresponds with the graded person. The form will have next and previous buttons to move through the grading process - when previous is chosen I would like the option buttons to populate what was stored in the data sheet. I think I can mottle thru the code individually but with 60 option buttons it may take quite some time.
Can I call an option button choice by "Group"? I started coding individually, but it will take a lot of code - surely there is a more efficient answer. A picture of my form is attached at the bottom of this post.
VB: Private Sub OptionButton1_Click()Dim Grade As String If Me.OptionButton1 = "A" Then Grade = "A" Else Grade = "" End If
I have two option buttons on a user form, one for a temperature of <250 & one for a temperature >250. I want the option button >250 to be greyed out or have it so that you cannot choose it & option button <250 selected if a certain criteria in a list box is selected. The list box is called Valve_Model & the criteria i want it to work on is if the valve model HPBV Soft is selected & HPBV Soft AC.
All I want to do is create a group of 3 option buttons in an excel worksheet for a user to select one of two farm programs or none. (CIG or MRP or None) When a user makes a selection either CIG or MRP or None appears in a designated cell. I even used code in the VB editor help but it only shows how to operate one button (which is absurd.) I found an example using 2 buttons, but that wouldn't work either. Found a tutorial using 3 buttons and that wouldn't work. Is this a conspiracy? Every time I try to find help to do something simple in excel lately I hit a brick wall.
