Paste Values To 1st Blank Row Of Column In Different Worksheet
May 15, 2007
I have a template with data only in column B, with fields going down the rows. I'd like to copy B2, B4, B6...B24 to the next blank row (so the values need to be transposed to a row vs. column) in a Consolidated Workbook. Here's what I have so far:
NextRow = Worksheets("Sheet2"). Range("A1000").End(xlUp).Row + 1
For a = 2 To 24 Step 2
Worksheets("sheet2").Cells(NextRow, a / 2) = Cells(a, 2)
Next a
Except that the formula above pastes the first value in column B of sheet2, any ideas on how to get it into column A? Worksheets("sheet2").Cells(NextRow, (a / 2)-1) = Cells(a, 2) gives an error. Also, instead of sheet2 in the same workbook, I need to paste the data into sheet2 of a different workboook (i.e. Main, located in My Documents.)
View 2 Replies
ADVERTISEMENT
Apr 20, 2009
I'd like to have done is to have a blank column inserted between columns W and X(these values change so the VBA statement should reference the end of the columns) and the values that are now in column Y(April 17th values) pasted as values into the now empty column X. I would like to do this for tabs Ann-Sheet 2. I'm having a bit of trouble with setting up the loop that would go through the desired sheets.
View 4 Replies
View Related
Jun 28, 2009
I have a little bit of problem with lookup function. When i paste values from another worksheet (paste special, values) in a cell which is lookup value i get #N/A. These values are numbers. When i put '7 for example i get the values i want from lookup table. I have a lot of these cells and its tedious job to put ' in front of every value. Is there a quicker solution?
View 3 Replies
View Related
Apr 13, 2007
Sub simplecopypaste()
Workbooks.Open Filename:="G:DATAWork for JCdata source.xls"
Range("B2:E2").Select
Selection.Copy
Windows("Data Destination.xls").Activate
Sheets("Sheet1").Select
Range("A2").Select
ActiveSheet.Paste
End Sub
This should open my file, find the relevant data and copy it to the worksheet that contains the macro. At present I can have it paste to the first cell however in future the first cell will have data and as such i need it to paste to the first blank cell in column A. any ideas on how to do this, do i need to get excel to scan from the bottom cell up until it finds a cell with data then paste below it? if so how do i do that.
View 9 Replies
View Related
Oct 4, 2013
In sheet "diary" I have data in certain rows in column A8:C10000 that contains values if a certain condition is met. I need a vba to copy and past only non blank cells in column D8:F10000. I first wrote a formula with index but it takes too long to caculate.
View 9 Replies
View Related
Jun 11, 2014
So I have two cells D15 and C15.
I simple want to copy there values (There paste links)
And paste them into the next blank row between D/E17/ and D/E26.
View 1 Replies
View Related
Aug 30, 2008
I'm trying to copy the non blank cells in an area ("B120:K239"). and special paste (values only) to the next blank row of the actual work area (3 pages) within the worksheet. The area that this needs to paste to is between("B10:K29, B44:K63, B78:K97"). Problem is that if there are more rows to be copied and pasted then there are open rows on the first sheet it gives an error due to the rows outside those areas having different formats (merged cells and that)
Question: Is there anyway to special paste between ranges? I've tried to hide the inbetween rows and that still doesn't work. Could it be possible to add something to this code to ignore hidden rows or to only paste to visible rows?
Sub Special_Paste ()
Application. ScreenUpdating = False
With Range("B119")
. AutoFilter Field:=2, Criteria1:="<>"
With Range("B120:K239")
Application.CutCopyMode = False
.Copy
With Range("30:43")
.EntireRow.Hidden = True
With Range("64:77")
.EntireRow.Hidden = True
Dim NextRow As Range
Set NextRow = Range("B97").End(xlUp).Offset(1, 0)...............
View 8 Replies
View Related
Jan 11, 2013
i need the vba code to
paste into last blank cell of column A
View 1 Replies
View Related
Jul 27, 2006
I want to cut a range from one worksheet, and then paste it at the end of a column in another worksheet.
I have tried this
Sheets("Latest Results").Select
Range("b5:b500").Select
Selection.Cut
Sheets("Archived Results").Select
Range("A500").End(x1up).Offset(2, 0).Select
Selection.Paste
View 9 Replies
View Related
Sep 9, 2013
The Room ID values in Column A are associated with the Room values in Column B. I'm trying to move the values in Column A Room ID to Column G Room ID by having excel look up value in Column C Room or Area #, compare it to Room, associate that with Room ID and automatically fill in Column G Room ID. There are 1000s of these so it's not possible to do it by hand.
I attached a picture where i had 2 different workbooks. In reality, I'm working off of 2 worksheets within a workbook.Excel Question.jpg
View 7 Replies
View Related
Apr 2, 2003
I am having problems finding a way to copy the contents of a cell and paste the content to a different worksheet on the first blank cell at the end of a column/row.
View 3 Replies
View Related
Jan 15, 2012
I am trying to create a sub that:
1) Copies the values of a worksheet/group of worksheets from one workbook and
2) Creates another workbook titled as Today's date (i.e., Workbook_011512)
3) Pastes these sheets into the workbook and
4) Deletes a specified row (i.e., if Column A says "cat", delete that row)
5) Reformats in the same alternating pattern as before (this sometimes gets messed up when the row gets deleted).
My data is formatted with alternating colors in a couple worksheets, and looks kind of like this:
dog 1 2 5
dog 1 2 3
cat 1 2 2
dog 3 4 5
Median 1 2 4
dog 1 4 6
giraffe 3 5 6
cat 3 6 2
Median 3 4 6
etc etc.
View 2 Replies
View Related
Jan 4, 2012
I have a perplexing problem. I created code to copy a worksheet that has the correct page setup and then copy/paste special to get just the values, not the formulas from the master sheet. It works standalone - the copied worksheet after doing the paste/special just has the data along with the master sheet's original page setup. When I include the code within a For Each... loop, it only copies the worksheet and I get the formulas. What is different between the two approaches that would cause the loop code to not do the paste/special values?
Code that works:
Application.DisplayAlerts = False
Application.CutCopyMode = False
Sheets("PerfCompDashDistrict").Activate
Sheets("PerfCompDashDistrict").Select
Sheets("PerfCompDashDistrict").Copy Before:=Sheets("Store")
[Code] ........
Code doesn't work:
For Each DistrictCell In DistrictRange
Sheets("PerfCompDashDistrict").Range("c4") = DistrictCell
Calculate
Sheets("PerfCompDashDistrict").Activate
Sheets("PerfCompDashDistrict").Select
Sheets("PerfCompDashDistrict").Copy Before:=Sheets("Store")
[Code] .....
View 2 Replies
View Related
Apr 4, 2014
Someone created a macro for me that creates and names worksheets based off of a list on my first worksheet "Summary". I would love to be able to then have the list of titles on Summary sheet be in cell A1 on each of the worksheets that I had created.
Here is the macro for creating all of the worksheets w/ names -
[Code] .....
View 6 Replies
View Related
Sep 3, 2007
I am trying to find a way of copying values from cells that are linked to another workbook and paste them to another sheet in same workbook to the end of last row entry. This needs to be done via VBA from a button. There are 35 rows and 9 columns linked to another workbook and they don't always have values (depending on source workbook). To cycle thru each row and copy if they have values and paste them to end of last used row on another sheet.
View 6 Replies
View Related
Jan 19, 2012
I have data in some of the cells within range A26:A39
These cells are populated via an IF function on another worksheet. Even though the cells appear blank (as in the value returned is ""), there is a formula in these cells. I think it's called formula blank?
I am looking for a way to copy the data from the cells within the range which are not blank (ie: not = "") and paste this data elsewhere on the sheet in a list with no blank spaces in between.
I anticipate that there will be 4 non blank cells within this range.
Ideally I would have data from the nonblank cells copied and pasted to cells
A40
A41
A42
A43
View 5 Replies
View Related
May 27, 2014
I am looking to see if is possible to copy and paste a worksheet and then remove data( only values not Text) and also not removing formatting and formulas
View 1 Replies
View Related
Aug 30, 2007
I have three sheets in my excel workbook. In second sheet, I have a simple If condition that checks to see if new items from Sheet1 meet a condition (eg, if startdate from sheet1 = today()). I am trying to copy the cells from column A and paste the values in my other sheet. I want it to append after the last cell in column A of my sheet 3.
Sub CopyNewCRs()
Sheets("Sheet2").Select
Range("A2").End(xlDown).Select
Application.CutCopyMode = True
Selection.Formula = Selection.Value
Worksheets("Sheet3").Activate
Sheets("Sheet3").Select
Set myRange = Sheets("Sheet3").Range("A2").End(xlDown).Offset(1, 0)
Worksheets("SDP_CR_Status").Range("myRange").PasteSpecial xlPasteValues, SkipBlanks _
:=True, Transpose:=False
End Sub
View 5 Replies
View Related
Aug 18, 2008
whats the most effiecient way to find all values under column B2 and all values in column O2 and paste them in column U2?
View 9 Replies
View Related
May 18, 2006
I have four worksheets with columns for different months (including future months) with a mixture of values and formulas. What I need to do is to be able to copy....paste values all the data (excluding the cells with SUM totals) which relates to a column which is less than the current month date. In other words, if today's date is the 15th May 2006 for instance, I need all columns relating to Jan, Feb, Mar and Apr to be copied and pasted as values in the same cell they are currently in. If the date was the 26th June 2006 I would need this to occur for the columns relating to Jan, Feb, Mar, Apr and May only. Hopefully you are following my logic? FYI - a formula for the current date is stored in another sheet.
I have attached an example sheet for you to have a play with. If any questions please let me know.
View 9 Replies
View Related
Jun 23, 2014
I am using the code below in Excel 2013.
Sub Test()
For Each Cell In Sheets(1).Range("J:J")
If Cell.Value = "131125" Then
[Code]....
This works great except that it pastes formulas. I would like to paste values only. I've tried
" PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _ :=False, Transpose:=False" and it gives me an error.
View 3 Replies
View Related
Mar 13, 2014
I have a data set with the weeks of the year as my column headers and a value of 1 (from a pivot table) in a distinct row value (removed for privacy) showing whether it existed in a given week based on pre defined criteria. What i need to do is ID the first (from the left) non blank cell in each row and then return that cells column header. I then need to do the same for the last (from the left) non blank cell in each row and then return that cells column header. On the attached I've put values in column N and O to show an example of what I need to return using a formula.
View 7 Replies
View Related
Sep 30, 2006
I got 3 columns of cell values as follows:
Demo 1
COL A COL B COL C COL D
_ 12 14 16
_ 32 12 18
_ EA LW RA
Demo 2
COL A COL B COL C COL D
12 12 14 16
32 32 12 18
EA EA LW RA
14
12
LW
16
18
RA
Can data of the 3 columns be copies (by vba code) to the blank col A in the exact sequence as shown in Demo 2?
View 2 Replies
View Related
Apr 9, 2009
How do I transpose the values in a column of cells (so the value in the topmost cell in the old column becomes the value in the bottommost cell in a new column)?
View 6 Replies
View Related
Mar 24, 2014
getting a vba formula to copy values from two columns and paste it in 3rd column on the click of a button.
For example:
if I have 3 rows filled in column A and 5 rows filled in column B then i need a formula to copy 3 rows in A and 5 rows in B and paste it to column C. so column C will have 8 rows now.
The number of rows the value can be entered can vary. [ example: sometimes we may have 6 rows filled in A 2 rows in B ]
View 9 Replies
View Related
Mar 18, 2009
I know it's very simple; I'm obviously a beginner. What I would like to do is to have an input box prompt me and then take these values and paste them into columns. One value for each column. Ideally what I would like to have happen is for the values input into the inputbox to be pasted to specific cells. I have attached an image for reference. The beginning of the range B10 and C10 will be fixed but the ending cell range B14 and C14 will be variable based on the number of entries; essentially one less than the total number of forms on row 15.
View 11 Replies
View Related
Oct 12, 2009
1. In this formula in column C, below, i have A2 as the look up... sometimes this will be A3 , A7 or other... how can i vary this formula? I've tried it all ways.
Range("C2:C" & LR).SpecialCells(4).Formula = "=VLOOKUP(A2,Data!$A:$B,2)"
It need to be inserted based on the first cell in column A which has a value.
2. after this has done its thing... how can i paste the values to ONLY those cells which have been affected by the formula. I don't want to copy, paste special the whole column as there are sub total and other exciting things included.
View 9 Replies
View Related
Oct 26, 2009
My macro's function is to paste the workdays of an entire month in a specific row of a worksheet. Everything seems to work except using a number to reference the column in which to store the values. I've searched the web for over an hour and found two "solutions":
1. write a function to convert column number to a letter
2. utilize Cells object
#2 seemed more efficient but the function is giving me the error: "Runtime Error: '1004': Method of 'Range' of object "_Worksheet' Failed"
View 4 Replies
View Related
Jun 1, 2012
I am trying to work out some code that will allow me to search worksheet2 to find the last filled cell in column A.
I would then like to copy the contents of the cell.
Then past this data into the first empty cell in a column in worksheet2
View 1 Replies
View Related
Oct 13, 2006
I am working on formatting a spreadsheet report where the values will change in column A. Here is what I would like to do via a Macro. Compare the cells in column A (e.g., compare A2 to A3, compare A3 to A4, and so on). If the values between the two cells in column A are different, insert three blank rows and set the active cell to the next cell following the blank lines. Example:
if cell A5 is different from A6, insert three blank rows below row 5 and new active cell is now A9 and the comparison would start again. I have been trying to code the macro for this but with no success. Here is the macro I have been working on.
Sub Macro1()
Const NumRow As Integer = 3
Dim StartCell As Range
Dim RowNR, NewCnt As Long
Dim RowCount As Long
Dim Count As Long
Dim intRow As Integer
Dim bFmtComplete As Boolean
RowCount = Application.WorksheetFunction.CountA _
(Range("A1", Range("A" & Rows.Count).End(xlUp)))
bFmtComplete = False
RowNR = 2
Range("A1:J1").Select
' Rows("1:1").Select
Selection.Copy................
View 4 Replies
View Related
