I have a little bit of problem with lookup function. When i paste values from another worksheet (paste special, values) in a cell which is lookup value i get #N/A. These values are numbers. When i put '7 for example i get the values i want from lookup table. I have a lot of these cells and its tedious job to put ' in front of every value. Is there a quicker solution?
I have a perplexing problem. I created code to copy a worksheet that has the correct page setup and then copy/paste special to get just the values, not the formulas from the master sheet. It works standalone - the copied worksheet after doing the paste/special just has the data along with the master sheet's original page setup. When I include the code within a For Each... loop, it only copies the worksheet and I get the formulas. What is different between the two approaches that would cause the loop code to not do the paste/special values?
I have a template with data only in column B, with fields going down the rows. I'd like to copy B2, B4, B6...B24 to the next blank row (so the values need to be transposed to a row vs. column) in a Consolidated Workbook. Here's what I have so far:
NextRow = Worksheets("Sheet2"). Range("A1000").End(xlUp).Row + 1 For a = 2 To 24 Step 2 Worksheets("sheet2").Cells(NextRow, a / 2) = Cells(a, 2) Next a
Except that the formula above pastes the first value in column B of sheet2, any ideas on how to get it into column A? Worksheets("sheet2").Cells(NextRow, (a / 2)-1) = Cells(a, 2) gives an error. Also, instead of sheet2 in the same workbook, I need to paste the data into sheet2 of a different workboook (i.e. Main, located in My Documents.)
Someone created a macro for me that creates and names worksheets based off of a list on my first worksheet "Summary". I would love to be able to then have the list of titles on Summary sheet be in cell A1 on each of the worksheets that I had created.
Here is the macro for creating all of the worksheets w/ names -
I am trying to find a way of copying values from cells that are linked to another workbook and paste them to another sheet in same workbook to the end of last row entry. This needs to be done via VBA from a button. There are 35 rows and 9 columns linked to another workbook and they don't always have values (depending on source workbook). To cycle thru each row and copy if they have values and paste them to end of last used row on another sheet.
I am looking to see if is possible to copy and paste a worksheet and then remove data( only values not Text) and also not removing formatting and formulas
Sub Test() For Each Cell In Sheets(1).Range("J:J") If Cell.Value = "131125" Then
[Code]....
This works great except that it pastes formulas. I would like to paste values only. I've tried " PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _ :=False, Transpose:=False" and it gives me an error.
The Room ID values in Column A are associated with the Room values in Column B. I'm trying to move the values in Column A Room ID to Column G Room ID by having excel look up value in Column C Room or Area #, compare it to Room, associate that with Room ID and automatically fill in Column G Room ID. There are 1000s of these so it's not possible to do it by hand.
I attached a picture where i had 2 different workbooks. In reality, I'm working off of 2 worksheets within a workbook.Excel Question.jpg
I tried both IF and LOOKUP and failed. I'm trying to search for values from one worksheet and identify whether or not those values exist in another worksheet. I attempted the following lookup in field A2:
=LOOKUP(B2,Sheet3!A$2:A$914,Sheet3!C$2:C$914)
B2 (thru B5000 or so) contains values I want to search for; sheet3!A$2:A914 is where I want to look and column C of that same sheet, entered the text "Yes" in an attempt to have the results list "Yes" for hits and N/A for misses. (All fields are text.) I copied the formula all the way down the sheet in column A. The result it is returning is N/A in A2 and Yes in A2 -to the bottom, which is incorrect.
Attached is my code, pay attention to the bold part. I want the sourceSheet to be copied as a sheet and pasted in the targetSheet (the Sheet2 of "NewBook") but I want it pasted asvalues. Here is the specific part which needs to be looked at...and below is the full code.
VB: Set sourceBook = Application.Workbooks.Open(sourceFilename) Set sourceSheet = sourceBook.Sheets("Current") Set targetSheet = NewBook.Sheets("Sheet2")
I've been tackling this data capture/paste issue for a week or so. I found the string below which does provide a good foundation for my challenge. But, my basic level of understanding macros limits my modifications to meet my needs.
[URL] ......
I have 20 worksheets in my master file corresponding to Excel files individual associates will update weekly. After the associates have updated their individual files for the week, I want to capture the data entered and paste values into a master file containing a worksheet for each associate (sharing the same name as the individual associate file). All of these files are housed on team SharePoint sites.
I need a macro to perform several steps after clicking a "Run Update" macro button in the master file: Open individual associate fileIn master file, search for each Initiative listed in column B (starting cell B3) in the individual associate file (in column B starting at cell B11)If Initiative is found in individual associate file, copy adjacent data in columns D:J for the respective rowIn master file, paste values to the corresponding Initiative row for the corresponding week's worth of dataIf Initiative is not found in the individual associate file, move to the next Initiative listed in the master fileRepeat these steps for each individual associate file
Linking would be the easiest way to accomplish this if I wanted to have a multitude of weekly individual files for the associates. However, I'd rather each associate have one file for them to update (basically overwriting their previous week's entries).
I need to ensure the paste values corresponds to the appropriate day of the week. In simpler terms, if the date in the individual associate file in cell D9 reads Oct 1, 2012, the data captured from that row needs to be pasted to the corresponding row/column in the master file that reads the same date.
Paste can this be set to default to Paste Special Values only ?
I have a sheet with a number of lists validated drop down boxes. The sheet is networked and works fine.
Problem other users as they are entering information into the required cells they are copying and pasting. Then the inevitable occurs they paste data into the wrong cells the validation from the original cell is pasted as well. Is there a way I can set paste special values only to be the default for the full sheet.
I have worksheet 1 and worksheet 2. I have a different list of names in column A in both worksheets. Some of the names in worksheet 1 are in worksheet 2, but only a partial list. Worksheet 2 names are not in any kind of order and the rows do not match up with worksheet 1. In worksheet 1, column B is filled with each person's email address. In worksheet 2, column B NEEDS to be filled with each person's email address.
Is there a way for me to take each name, sequentially, on worksheet 2 and find that same name in worksheet 1, then pull the email address from column B (beside the name) and copy it to that cell in column B of worksheet 2?
I have been trying to write a macro so that any rows with a 'Y' in column I in worksheet 'delivery' are cut and pasted into the first blank row of another worksheet 'archive'. I realise that this is similar to previous posts here and have spent all day trying to get it to work using your previous advice but I can't get it to work.
Starting with one worksheet with end date as one of the columns. I filtered the worksheet with end date > (certain date) and copied the results to a second work sheet.
The original worksheet has all courses with end dates from 1998 to 2009. The second worksheet has all courses with end dates > 2004.
How do I find out which courses have end < 2004. But do not also have an end date > 2004.
What I am trying to do is determine which courses are not longer being used since 2004.
Sheet linked from external file, new data coming daily. How to copy Values of cells from B4 till B-empty to C column? The attached file has a properly displayed data.
I currently have created a database (sheet two) with information including ID # (VH-XXXXX) in Column A and all the necessary information related to that unique Item. What I would like to do is search based on the ID number, have it filter, then copy and paste the row into another worksheet. Is this possible? I am relatively new to VBA and have written codes for copy and pasting rows, but never with an autofulter.
I have to edit the following test to have the possibility to insert in the new row,new VALUES. These data are in a different sheet where I'm working but in the same file xls.
with a macros to search for a certain value through an input box, and once that value is found, I need its corresponding row to be cut and pasted into the next available row in its corresponding sheet, and then the remainging rows to be shifted up.
For example, in column B of sheet 1, I have trap ID's. I need an input box that will search for the 'trap ID' that I enter, and then cut that row and paste it into its corresponding sheet. I will have numerous other sheets with different titles, so I was hoping to add the sheet to transfer the row to in the inputbox. I have found and modified a code, but cannot quite figure out what im doing wrong. I have attached my current code.
I'm in need of a macro that can look for a specific text in a column, cut the entire row and paste it in a new worksheet.
Row 0Column AColumn BColumn C Row 1XXXX Blue XXXX Row 2XXXX Green XXXX Row 3XXXX Red XXXX Row 4XXXX Green XXXX
Based on the above example I would need a code that look for "Green" in Colum B and Cut and paste that to a new sheet called "Green". I also need to add something that will copy the first row (Row 0 or header) to the new sheet. So far I'm able to find green and copy it but I can find a way to delete from the original worksheet.
1) How can I have the results paste only columns("A:N"). I have informantion in column P on sheets("PAS Codes") and right now this code move the requested colums, but wipes out what I had in column P. I tried to modify Range("A" & LRF + 1) to Range("A2:N" & LRF + 1), but that only copies one row.
2) I can only run this macro when sheets("PAS Codes") is active. How can I have it run no matter what sheet is active? I have the macro in a standard module.
Sub CopyPasCodes() Dim i, LR, LRF As Long LR = Worksheets("PAS Codes").Cells(Rows.Count, "N").End(xlUp).Row Worksheets("Sheet2").Range("A2:N" & LR).Clear
With Worksheets("PAS Codes") For i = 1 To LR If Cells(i, "N").Value = Sheets("Sheet1").Range("C1") Then LRF = Worksheets("Sheet2").Cells(Rows.Count, "N").End(xlUp).Row Rows(i).EntireRow.Copy Sheets("Sheet2").Range("A" & LRF + 1) End If Next i End With Worksheets("Sheet2").Columns.AutoFit Worksheets("Sheet2").Columns("E:N").ColumnWidth = 5.43 End Sub
I am trying to cut a row from one worksheet if a value in a cell is a negative number and paste the entire row to another worksheet in the same work book. I would like for the code to evaluate each cell in a range and if it is a negative number cut and paste that entire row into the worksheet called credits. I am very new to VBA. Below is the code I am trying to use:
Going around in circles. I have managed to piece together some VBA from the forumns to show some information in a MsgBox, I now want to past that same data and possibly more into a worksheet called "Status of an App" in Cells A2, B2, C2 etc.