I want to cut a range from one worksheet, and then paste it at the end of a column in another worksheet.
I have tried this
Sheets("Latest Results").Select
Range("b5:b500").Select
Selection.Cut
Sheets("Archived Results").Select
Range("A500").End(x1up).Offset(2, 0).Select
Selection.Paste
i need the vba code to
paste into last blank cell of column A
I am having problems finding a way to copy the contents of a cell and paste the content to a different worksheet on the first blank cell at the end of a column/row.
View 3 Replies View RelatedI need a macro to find the last cell in the column, then copy the formula to the next blank cell. Then, it goes back to the last cell (above) and paste's values. Then, go to the next column and repeat the process. I can do this but have to call each cell separatly...however, I would like to do it in a loop to simplify things. It would be great to even be able to just set the start and ending columns. Here is my current code:
Dim rng As Range, aCell As Range
Set rng = Range("C8, D8, E8, F8, G8, H8, J8, K8, L8, M8, N8, O8, P8, Q8, R8, S8, T8, U8")
For Each aCell In rng
Selection.End(xlDown).Select
Application.CutCopyMode = False
[Code] .......
It does not go to the next column, instead it stays in the same column and repeats the process.
In sheet "diary" I have data in certain rows in column A8:C10000 that contains values if a certain condition is met. I need a vba to copy and past only non blank cells in column D8:F10000. I first wrote a formula with index but it takes too long to caculate.
View 9 Replies View RelatedI have a template with data only in column B, with fields going down the rows. I'd like to copy B2, B4, B6...B24 to the next blank row (so the values need to be transposed to a row vs. column) in a Consolidated Workbook. Here's what I have so far:
NextRow = Worksheets("Sheet2"). Range("A1000").End(xlUp).Row + 1
For a = 2 To 24 Step 2
Worksheets("sheet2").Cells(NextRow, a / 2) = Cells(a, 2)
Next a
Except that the formula above pastes the first value in column B of sheet2, any ideas on how to get it into column A? Worksheets("sheet2").Cells(NextRow, (a / 2)-1) = Cells(a, 2) gives an error. Also, instead of sheet2 in the same workbook, I need to paste the data into sheet2 of a different workboook (i.e. Main, located in My Documents.)
I'd like to have done is to have a blank column inserted between columns W and X(these values change so the VBA statement should reference the end of the columns) and the values that are now in column Y(April 17th values) pasted as values into the now empty column X. I would like to do this for tabs Ann-Sheet 2. I'm having a bit of trouble with setting up the loop that would go through the desired sheets.
View 4 Replies View RelatedI have a spreadsheet where the value in cell A2 can change daily. I need a formula or macro that will allow me to copy the value in cell A2 and paste to B2, but if B2 is not empty, paste to C2, and if B2 and C2 are not empty, paste to D2, etc.
View 9 Replies View RelatedIn a column, there are data, but in between of each data in a column, there are many blank cells. I would like to do a copy and paste of the first data, and paste it in the same column column, while the cells are blank, and stops when there is a cell with a data, which is different than the previous one, and do the same again and again.
View 4 Replies View RelatedI am looking for a macro that will open a file called File1.xls highlight only the cells in columns A:B that have content, then toggle back to another file called File2.xls, scan columns A:B, find the next blank cells within A:B and paste.
Here is a sample of what i am looking for:
Macro to scan File1.xls and find & copy only cells in columns A:B that are not blank.
File1.xls
_|__A_ |__B_|
1|_text|_text| (Copy)
2|_text|_text| (Copy)
3|_text|_text| (Copy)
4|_text|_text| (Copy)
5|blank|blank| (DO NOT Copy)
Toggle to File2.xls, scan columns A:B, paste content copied cells from File1.xls in next blank cells in columns A:B of File2.xls.
File2.xls
_|__A_ |__B_|
1|_text|_text| (Pre-existing text)
2|_text|_text| (Pre-existing text)
3|blank|blank| (Paste Row1 from File1.xls)
4|blank|blank| (Paste Row2 from File1.xls)
5|blank|blank| (Paste Row3 from File1.xls)
6|blank|blank| (Paste Row4 from File1.xls)
I have a Worksheet that is manually populated with file names into the 2nd cell of each column for columns A through D.
I need a macro that will loop through each column, starting at B2, c2 etc, and copy each value, and then paste it into the first available blank cell in column E
Before
YesterdayToday10108595101085661010859510110182
After
ALL10108595101085661010859510110182
Ive tried a few combinations of code, but nothing seems to be working.
Sub simplecopypaste()
Workbooks.Open Filename:="G:DATAWork for JCdata source.xls"
Range("B2:E2").Select
Selection.Copy
Windows("Data Destination.xls").Activate
Sheets("Sheet1").Select
Range("A2").Select
ActiveSheet.Paste
End Sub
This should open my file, find the relevant data and copy it to the worksheet that contains the macro. At present I can have it paste to the first cell however in future the first cell will have data and as such i need it to paste to the first blank cell in column A. any ideas on how to do this, do i need to get excel to scan from the bottom cell up until it finds a cell with data then paste below it? if so how do i do that.
I have checked archives, some similiar but not quite what I want.
In code below I want the output instead of going offset one column to right in same row to go one column to right into the next blank cell.
This loop is overwriting the first cell in range and not writing to the first blank cell in range.
For Each cnote In NOTE
If Trim(cnote).Value = "" Then
cnote.Value = notes.Value
Exit For
Else
End If
Next cnote
If I take out the exit for , it copies to all cells in range.
Data range is A2:A301. From this range sometime all and sometime selected data is required to be copied in another column for example C2
downward. What is needed: select the range from A2:A301 with an input box then the required data to be pasted in C2 downward but with a blank cell after four cells.
C2
C3
C4
C5
blank
C7
C8
C9
C10
blank
and so on.
I'm doing it Ctrl+C n Ctrl+V but that is very time consuming.
I want to copy the data in "Sheet1" without the header and paste it in "Sheet2" but only paste it in the first blank cells because i sometimes have data in "Sheet2". i would also like to paste it as paste special method when pasting. See attached for details.
View 7 Replies View RelatedHow to copy paste data without replace existing data or keeping existing data?
it's possible??
What can I add to the macro I already have in place (below) to accomplish what I'm looking for (2 parts)? ...
1) I need to copy everything (formulas) that is in C7:F7 and paste it down to all "active" rows - I'm defining an active row by any row where column A is not blank.
2) I need to copy everything (formulas) that is in Q7:AF7 and paste it down to all "active" rows - I'm defining an active row by any row where column P is not blank. (You'll notice by the screenshot that there will be blank cells in column P mixed in with non-blank cells.)
Code:
Sub AdminTool()
'
' CreateAdminTool Macro
'
'
ActiveWindow.Zoom = 90
Rows("1:1").Select
Selection.Insert Shift:=xlDown, CopyOrigin:=xlFormatFromLeftOrAbove
[Code] ...........
I am looking for a Macro that will search a column for blank cells, and when one is found will add text to the same row in another column. For example: The below is a spreadsheet. I am trying to find something that will search through column "C" in this case and add text (of my choice) to Column "A" if the cell is Blank. So Since cell C1 is Blank then Type "ERROR" is cell A1.
A B C D E
1 X X X X
2 X X X X
3 X X X X X
4 X X X X
5 X X X X
the situation is i have a sheet, contains like 500 cells, from A1, to T500, some of the cells are blank, then i figure that from cell A1 to E500 not all the words in capital, so i make it with upper on the2nd sheet, then, i copy + paste value back to the first sheet (A1 to E500)
i get wht i want, but why it's like there's no blank cells anymore on my worksheet.
like you know, if u want to jump from a filled cell to the blank cell, you would hit Ctrl + Down, it jump to the very end of the datas that i paste value before.
so when i hit Ctrl + Down from A1, it jumps to A500, meanwhile the filled cells only 10 cells.
A
B
1
Name
Action
2
Joe
Created
3
Bob
Approved
4
Cindy
5
Jane
6
Dave
7
I want to copy a cell from a column and paste it to next column and up one row. My current data looks like this:
DATA
1234
I want to make it look like: DATA 1234
I'm working on this macro that copies data on sheet1 from A2:AI2 till the last non-blank row in the same range i.e. A:AI and paste it on sheet2 in the first blank row. However, my code keeps picking up A1:AI1 from sheet1 as well and pastes it on sheet2 just before the data that I actually want to paste. Here's my code:
[Code] .....
i need a code that moves down a column and for every empty cell in the column the cell to the left is cleared and then it moves on to the next cell down. the column is not always the same and will start from a selected cell, and the column will contain no more than 5 rows
View 3 Replies View RelatedI want to get the text inside the cell which is to the left of the first blank cell of a column.
I show the problema in the attach imageSin tÃtulo.jpg
I have a data in a column B, from B17 to B1000. the data looks like:
0.1
0.5
20
15
16
20
10
I want to get the last non-blank cell (in the previous example = 10), and the one before it (20), and the one before it (16).I mean I want the last three non-blank cells. I used =INDEX(B17:B1017,MATCH(9.99999999999999E+307,B17:B1017)) to bring the last non-blank cell. I'm using excel 2003, but it's OK to use Excel 2007 if it will solve the problem.
I have a range name called 'Dates' that I need to copy to another column, however in the range name not all cells are populated (however there is a formula that specifies if a cell is blank).
I am trying to record a macro that will take me to the next blank cell in the column I am copying to, but when I go to a cell at the bottom of the column then press 'End' and the up arrow I am taken to the cell that is the equivalent of the bottom of the range 'Dates', even though this is not the next blank cell.
How can I get it to go to the next blank cell in this case?
I want to copy a changing value from a cell (A3) to the next blank cell in the column creating a list of numbers for a total.
View 3 Replies View RelatedI need some VBA code that will allow me to copy the prior columns cell value into the current row if the cell is blank. More specifically if there is a blank cell in column D, then copy the adjacent value in column C to the cell. Hope this makes sence. I've attached a sample spreadsheet that shows my desired output.
View 3 Replies View RelatedIs this possible using code: Copy Cell A1 and Paste in first empty Cell down Column D. This would be connected to a command button. Both Cell A1 and Column D are on the same spreadsheet.
View 3 Replies View Related