Pasting Data To Dynamic Range Using VBA
Aug 3, 2012
I am trying to paste a single cell value to a range that will vary according to row counts in two different columns. I'm pasting in column B so I want to use .Range("B" & BRowCount) as my starting value. I then want to paste the value down column B until I reach the last used row in column C (i.e., .Range("B" & CRowCount)). None of the paste range code that I am trying seems to work.
Code:
With CS
BRowCount = CS.Range("B65536").End(xlUp).Row
BRowCount = BRowCount + 1
.Range("B" & BRowCount).PasteSpecial Paste:=xlPasteValues
.Range("B" & BRowCount).Copy
CRowCount = CS.Range("C65536").End(xlUp).Row
'---->Paste Code Inserted Here
End With
View 4 Replies
ADVERTISEMENT
Aug 5, 2014
I'm trying to copy a range of column headers from one worksheet and paste them in another using a macro
The source range starts at Q1 and runs along row 1 for a variable number of columns each time.The destination cells start at B1 and will run along row 1 for the same number of columns.
I've got as far as counting the number of source columns
PHP Code:
Dim LastDate As Long
LastDate = Sheets("Edited data").cells(1, Columns.Count).End(xlToLeft).Column
how to paste to a changing number of columns
PHP Code:
Sheets("Edited data").Range("Q1", cells(1, LastDate)).copy Destination:=Sheets("Variety Total").Range("B1", ????)
View 2 Replies
View Related
Apr 8, 2014
How might the code below be changed to handle any number of rows? Right now it's set (from a recorded macro) to go down through row 237, but I need it to sort anything from just a few to maybe a thousand.
Cells.Select
ActiveSheet.Sort.SortFields.Clear
ActiveSheet.Sort.SortFields.Add Key:=Range("C2:C237"), _
SortOn:=xlSortOnValues, Order:=xlAscending, DataOption:=xlSortNormal
ActiveSheet.Sort.SortFields.Add Key:=Range("B2:B237"), _
SortOn:=xlSortOnValues, Order:=xlAscending, DataOption:=xlSortNormal
ActiveSheet.Sort.SortFields.Add Key:=Range("K2:K237"), _
[code]...
View 5 Replies
View Related
May 5, 2006
I am trying to create a dynamic range for a list that I have. I also want to create an extra empty cell at the bottom or top to type in text that I need only once in some special cases. I named the list and changed the reference to =offset(Sheet1!,$A$2,0,0, counta(sheet1!$A$A),1). The data starts from A2. However when I used Data> Validation>List to see the data, I am always missing the last row in the list.
View 3 Replies
View Related
Aug 31, 2006
I have created a chart that automatically expands as more data is added. This works great by using named ranges in my Chart's Series' Values and Axis Label fields. The named ranges use the Offset function.
The problem I am having is applying this same technique to to same chart to vary the number of series that I want to chart. I created a name range, using the offset function. But when I add the name to my Data Range formula, it will not stick. It changes the number of series displayed correctly when I add the name. But after I click OK on the Source Data dialog box, the data range reverts back to the address supplied by the name range variable; it does not retain the name range variable itself. Can Chart Data Ranges not contain a name range variable, especially when name range variables are used in the series formulas?
View 5 Replies
View Related
Mar 13, 2007
I have a pivot table based on a sales sheet called "Datasheet". I have created the pivot table using a dynamic name as below =OFFSET(DataSheet!$A$1,0,0,COUNTA(DataSheet!$A:$A),12). My problem is that I have 11100 lines of sales data but the when i refresh my pivot table it only seems to be going down to row 10979. Therefore missing out some of the data. Is there a max number of lines for a dynamic named range or is my formula wrong in any way
View 3 Replies
View Related
Feb 14, 2014
I have a spreadsheet that I have setup to have raw data pasted into. Long story short, it pulls the maximum reading for a given 5 minute period and returns the highest value for each 5 minute increment where there was a reading. It does this for all of the different dates entered, returning a separate data table for each date.
What I now need is to graph the data on a line chart. Since the number of time values can be variable, I have to include the entire range (for example A3:B5002). When I graph this out, it has all of the data clumped up at the beginning and flatlines for 99% of the chart.
I tried building dynamic named ranges using offset, but that seems to yield similar results once charted.
See the link below where I've dumped some sample data in (it wouldn't let me upload due to the size and I can't upload only part of it without breaking the whole thing). The data I need to chart is from columns A&B on the GraphData sheet. Sheet 1 contains the chart I have been trying to use. The endgame of this is to have the end user paste in their data and *POOF* charts.
My only restriction is that I cannot have Macros/VBA.
[URL]....
I tried following this post and using NA() instead of ""...no dice, it just puts #NA at the bottom labels instead of spaces.
View 3 Replies
View Related
Feb 21, 2011
The CRM application that we use provides output in an excel sheet "Table View 1". I want to be able to copy the data that is dumped to a sheet to another sheet. The requirements:The data output range is different. Sometimes it is 4 rows and sometimes it is 25 rows. I want a mechanism where based on the output, the formula/macro automatically copies the information to the new sheet.The first 2 rows need to be excluded when the copy is being made.
View 6 Replies
View Related
May 28, 2014
I have a range of cells with data from one day. This range is "C36:K63"
Each day, the prior day's range needs to be copied and pasted into a new range that begins two rows below where the prior day's range ends.
Thus, day two should copy "C36:K63" into a new range: "C65:K92"
As you can tell, the rows will change each day, but the columns will always remain the same.
How can I create a macro that allows a user to copy data from the most recent range and paste it into a new range?
i.e. if there is no data in C65:K92, the macro should copy the data from C36:K63 and paste it into C65:K92. Then, the next day, the macro would copy the data from C65:K92 and paste into C94:K121.
View 2 Replies
View Related
Nov 30, 2006
I am attempting to use a dynamic named range in a chart data series as described in Excel Hacks (Hack #42 and Hack #52).
Using Insert|Name|Define I have created a named range called CashFlowSaleChartDataRange that is set to the following value:
=OFFSET('Cash Flow-Sale'!$O$10,0,0,NumFlows,1)
When I subsequently assign a reference to this named range in the data series dialog it will accept the answer and my chart will adjust to reflect the updated range. However, if I return to the data series dialog, I now see the range address returned by the OFFSET function rather than the named range reference.
View 2 Replies
View Related
Jun 16, 2008
I've read through every thread I can find about dynamic named ranges as source data for a chart. It seems as if everyone can get it to work but me. I have a chart on one sheet that needs to update dynamically from data on another sheet when a button is clicked. Here's my code that runs when I click the button:
Sub Update_Center_Chart()
Sheets("Center Data Chart").Select
ActiveSheet.ChartObjects("Center Data").Activate
ActiveChart.SetSourceData Source = Range("CenterData")
End Sub
I get the error message: "Type mismatch." The data is in B1:F2 on a different sheet. The formula in the named range, "CenterData" is this:=OFFSET('Center Data'!$B$1,0,0,COUNT('Center Data'!$B:$B),4). The data will expand by 1 row every time.
View 5 Replies
View Related
Dec 22, 2009
I have a range which will change in size & in content, & I want this to be a Named Range at whatever size it is.
Reason I want to is because I want to make a Validation List with this dynamic range. I also want a Validation list which lists the content of 2 or more dynamic ranges which may or may not be on the same worksheet - is this possible?
i.e.
First dynamic range: called "Milestones" at A11
Second dynamic range: called "Activities" at A25
& make a Validation list that will list content of both
View 9 Replies
View Related
Apr 19, 2013
I have data that resembles (I have also attached an example workbook as well if that is easier)
Column A.................Column B................Column C..................Column D.............Column E................Column F
Year.......................Quarter...................Month..................Product-Code...........[data A]................[data B]
2013.........................Q1.........................Jan........................SD-21...................13%......................0.05%
2013.........................Q2..........................Apr........................NV-12...................7%.......................6%
etc
I am hoping to have, on another sheet, a series of dependent drop boxes- Year, Quarter, Month, SKU- which after selecting then displays 'dataA' & 'dataB'.
So you could select- List 1: 2013 ----> List 2: Q1 ----> List 3: Jan ----> SD-21.................and then 13% and 0.05% are displayed.
The data will be continuously added to and so needs to be based on a dynamic data range.
I know that a pivot table is the perfect way to do this, however my bosses have requested that I do not use that format so it is easy for all staff to access.
So I think I need to construct some sort of dashboard sheet, I have experimented with OFFSET from other posts, but so far have had no joy.
View 14 Replies
View Related
Feb 11, 2014
Selecting the range from Multiple Column data.
Currently, it is:
[Code]....
I have data from columns A:E
View 4 Replies
View Related
Jun 25, 2014
code to take jobs that are done on one spreadsheet and send them to the next available row of a specified range on another worksheet. I am also looking to incorporate a way to delete the empty rows that are left behind.
I have already made code to select the completed jobs, but am still unsure how to approach the next part. I can't even paste the selected range to another sheet without errors from range sizes.
The following code is done up to the point where I cut my selection.
Sub Update()
Worksheets("OpenGen").Activate
Dim c As Object
Dim rngA As Range
[Code]....
View 5 Replies
View Related
Jun 24, 2009
I have a question on the above but can't seem to find a solution. There are two ways that I can find for dealing with dynamic lists via data validation:-
1) Offset and match, cavet being the data must be sorted a-z
2) Have lists for each potential selection
Is there any way to get around 1 without having to do 2? E.g. Got two columns of data, unsorted, and a list from which the user can choose from. The user chooses from the list in first cell, in the second cell require the dynamic list to return all the values accordingly?
View 5 Replies
View Related
Mar 27, 2014
I often end up in a scenario where I want to be able to move text from one column into another using a formula, which involves pasting a formula down a filtered range... E.g. Column A contains both ID numbers & dates, I want to move ID numbers into Column B, so I apply a filter to all ID numbers using a formula "=A1" and paste it down the filtered range.
It becomes an issue when there is greater than 50 - 60 thousand rows - excel throws an error "selection range is too complex" and disregards the filtered range.
Only thing I can think of would be a VBA script to automate pasting a formula in blocks of 50,000 rows.
View 6 Replies
View Related
Jan 15, 2009
Here's what I want it to look like:
Here's Macro Code I have thus far: ....
View 9 Replies
View Related
Jun 10, 2009
VBA to find the next appropriate blank cell in column "A" when copying ranges of varying sizes and pasting them in a new worksheet one after the next.
Currently I have recorded a macro that uses the code below to get to this location, but I am worried this will break when I get new data of a different range size;
Range(Selection, ActiveCell.SpecialCells(xlLastCell)).Select 'my initial range selection
Selection.Copy
Windows("myfile.csv").Activate
ActiveSheet.Paste
ActiveCell.SpecialCells(xlLastCell).Select 'finds last cell of my paste
Range("N69").Select 'I hit the down arrow once to get to new blank row
Selection.End(xlToLeft).Select 'to go to begining/col A of new row for next paste
I have tried playing around with
ActiveCell.Next
but can't get it to work.
View 3 Replies
View Related
Jun 24, 2013
I have a matrix of coordinates in sheet ("layout") (eastings - V4:BR4, northings - U5:U100). I'm trying to run through each northing (row value U5:U100), for every easting (V4:BR4), by writing the coordinate value to sheet("ISO_model"), cell K18. Within the sheet (ISO_model) there is a model which gives an output in cell HA500. I'd like to write this output (for the specific easting and northing) back into the sheet ("layout"), so that I then have the x,y, z values to create a contour plot.
I've tried to start the look through the row of eastings, but it is not working.
Sub noise_contour()
For Each Cell In Range("V4:BR4")
'write coordinate into the model
[Code]....
View 5 Replies
View Related
May 31, 2006
breeze.
Here is my situation:
X Y Z
Oct Nov Dec Jan Feb Mar Apr May Jun Jul Aug Sep
A
B
C
The above format is how I want my spreadsheet to look like. On another sheet within the workbook, I have a chart with some control options that allow me to vary X, Y, Z (I can vary either of these individually). Anytime I vary any one of X,Y,or Z, then the values in A,B,and C all change. This is what I am looking for, a Macro that will allow me the opportunity to everytime I change or vary an option (X,Y,Z), I can hit "Save Scenario" and the new values will be appended to my "Report" sheet. The values of A-C and X and Y are kept on a sheet entitled "FY 07". X is maintained on a sheet called "Inputs". So in all, X,Y, Z and A,B,C are all copied for each scenario.
View 9 Replies
View Related
Apr 3, 2008
Im sorting a dynamic range as mentioned in this Sorting a Named Range. My range is called drWarningTypes and is defined as:
=OFFSET(DataSource!$A$2,0,0, COUNTA(DataSource!$A:$A)-1,1)
When there is only one cell in the range, then running the following sort function includes A1 also in the search (and also adjoining columns).....
View 9 Replies
View Related
Jun 3, 2006
I have a workbook with a database of 15 different products. We receive information with current prices for each of the 15 products on a weekly basis. This info comes in one single worksheet. I have created a different file with one worksheet for each product to track price behavior over time. I need to update these database everytime I get a new report. What I was trying to do is to develop a Macro to copy the data from a "Master" worksheet that includes all 15 products info to the respective worksheet for each product. Information is sorted in columns having the most recent date in the lowest column. I would need the Macro to copy the new data below the last price for each product. I would copy the data into the "MAster" worksheet, then run the Macro who would copy each row and paste it in its respective worksheet in the row rightafter the previous one.
View 4 Replies
View Related
Feb 2, 2010
On Sheet1, Row 2 I have my columns named January-December, which correspond to the names of the other 12 sheets in my workbook. I want to test and sum the same range of cells in each sheet by simply coping and pasting the formula. I am using INDIRECT and SUMPRODUCT, but is there a better way? It seems to have caused the sheet to run slowly. Perhaps it's just the amount of data. Here is an example of the formulas I am using:
=SUMPRODUCT((INDIRECT("'"&B2&"'!$B$3:$B$200")=$A$2)*(INDIRECT("'"&B2&"'!$C$3:$C$200")="Yes")*(INDIRE CT("'"&B2&"'!$E$3:$E$200")))
This gives me the intended result. B2 in this case is January. C2 is February and so forth.
View 3 Replies
View Related
Jul 15, 2014
I have a column of data that keeps getting new information in it. what i need is a named range that i can use for a chart, first point in the named range will be the first value in the column, second point will be avg. of point 1 and 2, then 3rd point will be avg. of 1,2,3 etc.
View 1 Replies
View Related
Oct 28, 2009
I am trying to get to grips with the dynamic ranges for pivot tables. I have named a range data and in the refers to section put:
=OFFSET(Sheet2!A1,0,0,COUNTA(Sheet2!A:A),COUNTA(Sheet2!1:1))
I was hoping that then when i go to data > Pivot table and it asks for the range i could put =Data but it tells me that the range is invalid. I have attached a copy at the bottom.
View 3 Replies
View Related
Sep 13, 2007
My searches have not produced anything that I could apply to this situation.
I'm trying to write VBA that would:
1. Search a Workbook for Dynamic Ranges.
2. When a Dynamic Range is found the code would:
A. Determine the current coordinates for the range.
B. Change the "Refers To" value From "=OFFSET...." To "=Worksheet_Name $Column$Row:$Column$Row"
3. Save Changes.
4. Close File.
My apologies but I have very little experience in writing VBA. I understand about variables, arguments, and IF/THEN but just enough to use functions within Excel.
View 9 Replies
View Related
Nov 6, 2008
I am copying some data from one workbook and pasting the data into another workbook depending on certain criteria (using autofilter) using excel VBA. For only One column i need to multiply data by 100 (i.e. convert it into percentage) For example column A in source worksheet has all values and i will paste it in column D of target worksheet. But before pasting i need to multiply the data by 100 so column D in target worksheet has values in %.
View 3 Replies
View Related
Feb 1, 2009
I am using 'Dim' to define a string for SheetName, a variable.
I have tried with no success various ways to try and paste data to a sheet with this variable.
I know the variable is correct as I am using it to make a new sheet then rename it and also move it.
View 9 Replies
View Related
Jun 25, 2009
I have a range that changes the data constantly, I have to watch that data changing. I am trying to work on a macro that copy that data and paste to another sheet. What would be the code to find the next empty row and paste my data there.
Data is in Sheet1, range A17:E32... and it needs to be pasted in sheet2 starting in F2.
View 4 Replies
View Related
