Copy And Pasting A Dynamic Range From One Sheet To Another?
Aug 5, 2014
I'm trying to copy a range of column headers from one worksheet and paste them in another using a macro
The source range starts at Q1 and runs along row 1 for a variable number of columns each time.The destination cells start at B1 and will run along row 1 for the same number of columns.
I've got as far as counting the number of source columns
I am trying to paste a single cell value to a range that will vary according to row counts in two different columns. I'm pasting in column B so I want to use .Range("B" & BRowCount) as my starting value. I then want to paste the value down column B until I reach the last used row in column C (i.e., .Range("B" & CRowCount)). None of the paste range code that I am trying seems to work.
Code: With CS BRowCount = CS.Range("B65536").End(xlUp).Row BRowCount = BRowCount + 1 .Range("B" & BRowCount).PasteSpecial Paste:=xlPasteValues .Range("B" & BRowCount).Copy CRowCount = CS.Range("C65536").End(xlUp).Row '---->Paste Code Inserted Here End With
The CRM application that we use provides output in an excel sheet "Table View 1". I want to be able to copy the data that is dumped to a sheet to another sheet. The requirements:The data output range is different. Sometimes it is 4 rows and sometimes it is 25 rows. I want a mechanism where based on the output, the formula/macro automatically copies the information to the new sheet.The first 2 rows need to be excluded when the copy is being made.
I am trying to copy a range of valid cells "non-blank" from "sheet_a" ,"sheet_b" ,"sheet_c" to "sheet3" i was successful to copy from one sheet only. how to copy from all the sheets listed from the same workbook.
following is the VBA code i am using
Sub CopySample() Dim shSrc As Worksheet Dim shDst As Worksheet
I need a macro which goes thru the columns A to K, picks up the value in the filled cells and paste them all in 1 column on another sheet, like sheet2 A1 onwards. Attached is an example of the file.
I am using the following code to paste an excel generated chart into ppt. How do I adapt it such that it only pastes the charts from sheet2 and not the entire workbook?
Dim ws As Worksheet ThisWorkbook.Activate For Each ws In ActiveWorkbook.Worksheets ws.Activate If Left(ws.Name, 5) = "Sheet" Then Range("B2:G" & ws.UsedRange.Rows.count).Copy Sheets("Rev New").Range("B1").Insert xlDown End If Next ws End Sub
So far I have this as a code but it seems to only paste the last sheet at the top ....
On Sheet1, Row 2 I have my columns named January-December, which correspond to the names of the other 12 sheets in my workbook. I want to test and sum the same range of cells in each sheet by simply coping and pasting the formula. I am using INDIRECT and SUMPRODUCT, but is there a better way? It seems to have caused the sheet to run slowly. Perhaps it's just the amount of data. Here is an example of the formulas I am using:
I've searched and tried some similar examples but cannot find a fit that works. I have two columns of data on the same worksheet- IO2 & IR2 (3 columns apart) that will have varying end lengths. I need to combine these into one column on a different tab ( cell A8)- one on top of the other. When it gets to the first blank cell I want it to stop and grab the second column till it gets to the first blank cell. Note-these columns need to stay in the current order but format will not matter. It sounds so simple but I cannot make a formula or macro do what I need it to. I would prefer a macro because the workbook is already so slow.
There is a second part too (but I couldn't even get past the first!). Once the above is done. I will actually have the process repeat and return two different columns next to each other. I then want to reference these two columns and a month and find the correlating set of date in the first worksheet and bring it over. Here is the current macro I was trying (for part 1) but I can only get 1 column returned.
Sub FCST() Dim improw As Long, impColumn As Long, MyCell Dim ws1 As Worksheet, ws2 As Worksheet Dim improw2 As Long, impcolumn2 As Long Application. ScreenUpdating = False Set ws1 = ActiveWorkbook.Sheets("Marketing") Set ws2 = ActiveWorkbook.Sheets(" Forecast") improw2 = 8 impcolumn2 = 1 impColumn = 249 Do Until impColumn = 252 improw = 2 Do Until improw = 11078 'this is the number of possible entries in each column.........................
i have a range in a worksheet called "worksheet1" i need to copy and paste this into a workbook called "princiapl.xls. the range is dynamic but columns are always the same from A1 to G1 however the rows will change how do i copy and paste this into the other workbook
Basically in sheet 1 column A I have a long list of part codes. This is an ever expanding list so I assume I need to make it a dynamic range. This list has duplicate entries of certain part codes which is fine. I need to keep sheet 2 up to date with these part codes but I don't want duplicates on this sheet. I was then going to use vlookup to derive some but not all information for the part from sheet 1. I would also like the vlookup formula to expand as new parts are added to sheet1 and then subsequently copied to sheet2.
I have a sheet that gets updated from external source. For e.g. the B2 cell of sheet updates the date and C2 cell updates the value as on that date from the external link. Since, the value of the cells gets updated every time I open the sheet, I want to copy the value of cells to another sheet in chronological order ,when the file gets opened in different dates, so that I can present data in dynamic pie chart.
We have 2 dynamic ranges (input, output) on different sheets (sample data below).
Sheet1> Input Dynamic range 5 columns
Sheet 2>Output Dynamic range 4 columns - Include only rows IN=1 - Sorted by LEVEL (BIG to SMALL) and BUY (SMALL to BIG) - Keep duplicates
What formulas should I place on Sheet2 avoiding Pivot tables or VBA?
Sheet1> Input (16 data rows) A B C D E Level Buy Sell Firm IN 16620 4.00 null F1 OUT 16610 5.10 0.80 F1 OUT 16600 11.40 6.60 F1 1 16590 24.50 18.60 F1 1 16580 44.90 37.10 F1 1 16570 66.90 59.60 F1 1 16560 84.40 78.70 F1 1 16550 95.00 90.30 F1 1 16540 99.80 95.60 F1 OUT 16530 100.00 98.00 F1 OUT 16611 6.66 0.497 F2 OUT 16600 9.09 1.96 F2 OUT 16589.1 20 12.5 F2 1 16578.2 41.66 33.33 F2 1 16567.3 73.33 65.21 F2 1 16556.4 90.9 84.61 F2 1 16545 98.5 91.66 F2 OUT
Sheet2> output (10 data rows) A B C D Level Buy Sell Firm 16600 11.4 6.6 F1 16590 24.5 18.6 F1 16589.1 20 12.5 F2 16580 44.9 37.1 F1 16578.2 41.66 33.33 F2 16570 66.9 59.6 F1 16567.3 73.33 65.21 F2 16560 84.4 78.7 F1 16556.4 90.9 84.61 F2 16550 95 90.3 F1
I have a range of cells with data from one day. This range is "C36:K63"
Each day, the prior day's range needs to be copied and pasted into a new range that begins two rows below where the prior day's range ends.
Thus, day two should copy "C36:K63" into a new range: "C65:K92"
As you can tell, the rows will change each day, but the columns will always remain the same.
How can I create a macro that allows a user to copy data from the most recent range and paste it into a new range?
i.e. if there is no data in C65:K92, the macro should copy the data from C36:K63 and paste it into C65:K92. Then, the next day, the macro would copy the data from C65:K92 and paste into C94:K121.
Some of you may have seen my 2-dimensional Date Range Criteria thread . By request, that thread has been closed and I am opening a new one on a related, but infinitely more complex note.
The solution to the previous thread worked, but not well with my project. I'll go a little more in depth into how my project works, and try not to be too detailed and irritating.
I am trying to create a homebrew Learning Management System for some of the Training courses that my department offers. I've posted here a few times on the same project, and the advice from all previous posts has been excellent.
What I have so far allows users to input all of the relevant information about a participant, and then keep track of the dates when they took a particular course. They input this information with a Userform. This data goes into a Participant Master List, which is where the majority of the functions take place. There is a Workings sheet set to xlVeryHidden, which houses some other information, including results for searches, and finally there is the Report Template--the source of my original question.
The original question was how to make a formula that would track how many people from each department and site have attended training within a date range. That question was answered in the 2-dimensional Date Range Criteria of the report.
What makes it potentially more complicated is that a user might want to generate two or three reports at the same time to compare side-by-side. I'm pretty sure I can make something that will do this, and allow it, but the way it's looking could be really complicated--extreme headache, and a lot of VBA coding.
I have a query on retrieving the result from a set of range from other sheet.
Query: In the Sheet1 Column B has to take first two words from the Column A & lookup the matching results from Sheet 2. (The search range should be the first two words of each cell)
Result: The complete sentance in the Cells (First Two words) should get placed in the Sheet1 Column B
Example: The Expected result should be as mentioned below. (Blue in color should be the results)
Sheet1A BC1NameResults2abc def fkfeabc def words3ghi jkl kikgN/A4mno pqr stu lkasmno pqr must work5 Don't give my book don't give up6vwx yzyvwx yzy not7xwv uts rqpxwv uts yes8omn lkjN/A9ihg fed cbaN/A
Sheet2A BC1Lookup Data2abc def words3xxxghi jkl4yes you have to5don't give up6no you will not7mno pqr must work8vwx yzy not9Excel work10xwv uts yes11omn mre lkj12ihg not fed 13not work14
I am having a few problems with dynamic named range in excel 2000.
When adding new data to the range, excel extends the range correctly, but only copies some of the formula correctly. It does not copy the formula that references a cell from another line.
I am trying to create a excel spreadsheet and have a formula =e10-e9, which does not copy down.
Hi. Does anyone know a formula to copy a selected range of cells on sheet one to a range on sheet three when a check box in checked. Ex. copy range a4:j4 on sheet one into a4:j4 on sheet three once the check box for on sheet one is checked?
I have an excel workbook which requires us to enter the log details of some sites and then a report is generated using these logs (report attached) . [URL] .......
I want that excel should automatically identify the site and calculate its outage with the following formula:
Outage %age= Total Outage(min)/100.80 and add it in the respective column while identifying the outage.
e.g. if outage is of power then the calculated %age outage should be pasted in the power outage column in front of the respected site.
e.g. in the sheet attached above the first row in the first sheet states that SKU2326 was down for 50 mins
Now %age outage will be Outage %age= 50/100.80 Outage %age=0.496
Now as the outage is related to power so this outage should go into power column in sheet number 3 labelled as "Network Total Up time Week#17"
Now the next time SKU2326 becomes down it should be added with this 50 mins and the outage calculated as presented above.
Need a code using application.inputbox to get a range, then use that range to copy and paste the range's link and format to a different sheet? The specifics don't matter, I just can't figure out the syntax. Here is what I have currently:
I want to do is add data into Sheet A each day then press a button which will copy the data in a range and paste it into Sheet B, but I want to create a list of all data so I need it to find the next empty cell and start the paste from there (if that makes sense).
I want it to create a data base on one sheet from a daily import, I have a code to copy one cell to next empty cell but dont know how to duplicate it to a range.
I hope I have given you enough info this is what I have done so far
Public Sub CopyData() Dim ws As Worksheet, bi As Byte, vData(1 To 1) Set ws = Sheets("A") For bi = 1 To 1 vData(bi) = Application.Choose(bi, ws.Range("A1"))
I have a sheet named "Fittings Summary" with an export button. I need some code that will copy range A1:G38 of the fitting summary sheet then open a dialogue box asking for the following "Please Enter Tag No" once a tag number is entered I would like a new sheet to be created in the same workbook named with the tag no entered previously then the copied cells pasted into it. I would like to keep the formatting of the cells but not the formulas within.
I would appreciate if someone can help me figure out a macro that will copy range (A3:T112) from "Step 1" sheet to next available row in "Step 2" sheet.
Basically I have three sheets. MAIN, Sheet 1 and Sheet 2
Sheet 1 and 2 are in the same format
A3 down is a list of country names and then B3:I71 contains the data im interested in.
I've been trying to create a function that looks at B3:i71 to see if any cell in that range contains a value greater then $0.00. If it does then the row that contains the cell with a value greater then $0.00 (between col A to K) should be copied to sheet MAIN from cells B3 down. This should ultimatley produce a list of data for any row containing a value greater then $0.00. This process should then be repeated on Sheet 2 and should join the list below sheet 1.
I have a range which will change in size & in content, & I want this to be a Named Range at whatever size it is.
Reason I want to is because I want to make a Validation List with this dynamic range. I also want a Validation list which lists the content of 2 or more dynamic ranges which may or may not be on the same worksheet - is this possible?
i.e. First dynamic range: called "Milestones" at A11 Second dynamic range: called "Activities" at A25 & make a Validation list that will list content of both
