I have a data entry field on a form that is formatted for percentages. Sometimes when i key in "10" it will correctly convert it to "10%" but other times it randomly converts it to "1000%". When the error occurs, I'm able to correct it by re entering the value a few times until it displays correctly as "10%".
View 2 RepliesI have written code for a userform, and after I enter in valid data, the cursor will not move on to then next field. I cannot even click on another field with my mouse. I changed some of the code around to add validation to it, and now I am unable to move on once a valid entry has been made. If the user enters in the value "9999" the userform works just fine, it only freezes when they attempt to enter in an employee number. I've tried a few different ways to resolve this, but nothing is working. This is the code I have written.
[Code] .....
I want to create a UI form to allow users to upload data. The data will be tabular (1 column per data field, one row per item). There will be more fields than I need, and the fields will not be named, so I need the users to select which column each field is in (with up to 20 fields). What do you think is the best control / combination of controls to use for this.
View 3 Replies View RelatedI have a percent 3.14%, that I want to show 15, 20 and 25% above and below that percent. I am showing below the results and then formula. The top calculation results in the same on both the left and right. However the -15,-20, -25% results are different. Which is correct.
3.14%
20% +/-
3.14%
0.63%
or
6.28%
1.57%
2.51%
[code].....
basic math, but I don't understand why the results are different.
I have now a formula that multiplies 32 row offsets. The no of rows of offsets are in CN31:DS31 and the references for the offsets are in DY$71:FD$71. The row offset values range from 1 to 11.
=OFFSET(DY$71,CN31,0)*OFFSET(DZ$71,CO31,0)* ... *OFFSET(FD$71,DS31,0)
There are close to 800 characters in the formula. I want to expand this to a multiplication of 100 factors. This would not fit in one formula, and creating more formulas is tedious and possibly subject to errors. It should be efficient, since this formula occurs 12000 times in my spreadsheet.
I have a simple formula ='info page'!b2&'info page'!b5 in places that on my sheet adds a company prefix to a item number, prefix in b2 and item in b5, we have a client that we cant use prefixes but now when I leave the field blank its giving a zero and thats not good either. I'm pretty sure an IFERROR or something will work but can get the syntax right.
View 5 Replies View RelatedI'm trying to track how complete a project is by checking if cells contain data, and if they do the percent in cell 'Y4' would increase.
I have 6 cells which represent milestones and if they contain data then they would add a certain percent to cell 'Y4'.
Cells B13 & R13 would have a weight of 15% each
Cells J13, J21 & J30 Would have a weight of 20%
Cell L34 would have a weight of 10%
Is there any way that if these cells contained any data that I could add that percent to the total in 'Y4'?
I am trying to count the number of times that data is in a field and in any field the date is greaert than today's date. This date field could be blank and that is where I am having the problem.
Example
See Attached
I have a cell that calculates an etch time, eg 41.88. The cell is formatted to give me whole numbers and quarters only so that the operators input is made easier, in this case 42.
When I use a macro to copy this to another worksheet, although it appears as 42, the actual cell data is 41.88. Anyway I can get the actual cell data to be 42?
I have data which needs to be formatted with a thousand separator as below.
400.00
1,000.00
250,000.00
How can I do this without it displaying as below
,400.00
I do not want it reflected in the case of hundreds.
I have a graph that pulls data from a toggled list. Values include currency, percentages and general numbers. The data is set up as text to report as currency, percentages and general numbers. Is it possible to have a graph read these text values?
View 1 Replies View RelatedReceive worksheets with data in different layouts that needs to be moved into formatted worksheet with unique layout and field size to import in to Access database.
Example of formatted table layout ....
I ran a very simple code that conditionally formatted red any cell sum greater than 12. The macro worked all the way to the end - about 15k rows. After saving and re-opening file only the first 1603 lines had the formatting and the rest did not. Several attempts end with no change in results.
I did the programming in Office 97 but edited and ran it on Excel 2002.
I'm trying to lookup data in a cell formatted as time, the array is also formatted as time but I continue to get the #N/A. Is there a certain format that I should use?
View 9 Replies View RelatedI'm trying to lookup data in a cell formatted as time, the array is also formatted as time but I continue to get the #N/A. Is there a certain format that I should use
View 6 Replies View RelatedPart of my work involves the transfer of thousands of lines of Excel data into FileMaker and then exporting this data to Word where it is finally formatted for publication. What I'd ideally like is to skip the FileMaker step and simply have it so that I import all the data from my Excel file into a Word document in one swoop. The problem is that the eventual export can't feature tables, it would be the icing on the cake for the data to remain as formatted, and the data needs to read line<space>line<space>, vertically.
Essentially, I need to know how to take this from Excel ..
this1.jpg
And turn it into this in Word ...
this2result.jpg
In the following extract, I would like to have today's date placed into Col K when an entry is made into Col J.
Entry into Col J is from a validation list of 3 options. What I desire is that when one of these options is selected ("Complete"), then I would like today's date to be written into Col K.
Currently Col K has a validation list which comprises dates from 1st of each month from July to June.
I need a fixed date as text preferably, so was thinking the VBA function "Date" on a Change Workbook Sub.
The information is currently part of a Table in Excel 2007 that has about 500 records.
IdeasList
*
J
K
2
Status
Month Completed
3
In Progress
*
4
Complete
Jul-13
5
*
*
6
*
*
Data Validation in Spreadsheet
Cell
Allow
Datas
Input 1
Input 2
J4
List
*
=ValidationList_Status
*
K4
List
*
=ValidationList_Months
*
I have a percentage in R3.
If I make an entry in D13 then I want the R3 to be duplicated into C27 otherwise C27 should be 0.
I have a macro that imports a report. If the Charge Type in column A is BTOREPLX, I need to prefill the field next to it in column B with the text "REPLX", e.g. "REPLXCDROM". I've attached an example of the report.
View 5 Replies View RelatedIn building my pivot table my data that I want to show in the column area is showing up as rows stacked on top of each other. In the column section I'm trying to show Total Budgeted Amount next to Total Actual Amount but on the layout it's showing the two stacked on top of each other is there some kind of hidden key that I'm missing?
View 3 Replies View Relatedhow to mimic SELECT TOP 90 PERCENT from Access in Excel?
I can't use the percentile function because it interpolates the value if you don't have the right multiple of values in your array.
I have a spreadsheet that determines what percent increase over a previous quarter. The values can be negative or positive; however, I have one entry that I'm trying to divide zero by a number which results in the #DIV/0! error message. I rather have it say -1000% since that is the value I'm looking for. I now how to deal with a simple division by using an IF statement such as IF(B1,A1/B1,0), but this one is throwing me a curve.
The attached spread sheet is a quarterly percent increase over the last one. In the example, N00377 represents a machine in cell D14 and D17, where cell D17 is the last quarter, and I'm comparing it to cell D14 which should show an increase or decrease in cell F.
I have a set of data that is meant to distribute a certain number of items to different groups.
I have 10 groups, some will get more than others depending on previous usage. The problem is that I need the percentages to be in whole numbers and the total percentage needs to be 100%. I tried rounding but it doesn't work. Here is an example from one item's line.
Group#,1,2,3,4,5,6,7,8,9,10
Dist %,.1,0,.04,0,0,0,0,0,.87,0
These are rounded and it comes out to be 101%.
I want to find the percent of increase over last year. If last year was 100 and this year is 500 then the percent would be 500%. However things get tricky if last year was -100 and this year is 500 or if last year was 100 and this year is -500 then it get's screwy and I'm not sure what formula to use to handle any situation.
View 9 Replies View RelatedThis is what I have
Rate Hours =basePay plus 6% plus 7.1% total
$50.00 10 $500.00 $530.00 $567.63 $567.63
What i want to have is one cell that I can Total everything.
I want my spread sheet to display just rate, hours total
I am having troule making the formula to display everything in the total cell
I need a formula to show percent value in a certain way in cell D1
formula is
C1 = B1-A1
but I am stuck to get the percent syntax in formula bar right.
D1 = PERCENT OF B1-A1
Example1
A1 B1 C1 D1
52.5-2.50-50 % ( RED/NEGATIVE PERCENT)
Example2
A1 B1 C1 D1
2.552.5050% ( BLACK/POSITIVE PERCENT)
Example3
1037.00-70% ( RED/NEGATIVE PERCENT)
3107.00 70% ( BLACK/POSITIVE PERCENT)
Somehow I seem to think I need to use the Value of C1
( which is required btw) to get a percent in D1, but not sure how it
would go in one complete formula in D1
I am working on a project and would like to see if there is a solution for it. i have a workbook that has data entry that is summarized at a master level but I need to automatically use a formula to update another sheet after clicking an udpate button. The data from the data entry sheet needs to be allocated to all the lines that has the same master item based on the formula. A test workbook is attached ...
View 1 Replies View RelatedNow that the calculations are working, with the press of a button, I need to be able to select a range of dates and copy all lines within the range to a seperate sheet with the desired name under the same headings they currently reside under. I have included some modified code that is being used in another spreadsheet that was created for me, but I do not pretent to understand all of it and I no longer work with the creator of the spreadsheet. How do I use a button to open the form for date selections and entering the name of the new sheet, and then use the start button on the form to begin the matching and copying to a new sheet? If there is an easier way I am all for that too.
View 14 Replies View RelatedI have a tab called 'Tab1' in which I have column called 'Col1' and 'Col2'.
I have another tab called 'Tab 2' with columns 'ColA' and 'ColB'. When I enter a text in Col1(Tab1) I would like that text to be compared to data in 'ColA' from Tab 2 and when match found then get the corresponding value from ColB and autopopulate it in Col2 of Tab1.
in coverting these fields into a date field.
Example 91306 to 060913
I have encloed the file.