I have a graph that pulls data from a toggled list. Values include currency, percentages and general numbers. The data is set up as text to report as currency, percentages and general numbers. Is it possible to have a graph read these text values?
View 1 RepliesI have recently found that when I copy ranges (usually containing formulas), I only have the option of copying these ranges as text ( or vales). I can no longer copy formulas , (or formats, col width etc) in my excel worksheets.
This problem has only recently occurred and applies whether i have one or many spreadsheets open.
I have a spreadsheet where i do need to count cells values that are formatted as text but i do need to ignore the real text in some cells, in this formula i do need to add values depending of the adjacent cell.
I have attached a example : New Microsoft Excel Worksheet.xlsx‎
I have written below code
Sheet1.Cells(1,2)=Shett2.Cells(2,1)
and my sheet1 cell has a value which is bolded and after running above code the sheet2 cell is displaying unbolded value
how to copy the format as well
Is it possible to sum cells that contain numbers converted to text? I used TEXT function to convert them because I needed to format them (to display three decimal digits, if number < than 0.05, three digits otherwise). But now SUM Formula doesn't work.
View 4 Replies View RelatedI have two columns with entries consisting of numbers. I'm trying to match between the columns but some names dont match because of the formatting.
Example
065 matches 065 (I have that green triangle on the cell that indicated "The number in this cell is formatted as text")
However 120 doesn't match with 120 (only one of them have that green triangle)
I tried to format all the cells as text at it seems the match only works when the green triangle is available. The green triangle seems to only show its self when I double click on the cell. I have thousands of entries so that doesn't work. I also tried to use the "Text to Columns" but it coverts entries like 002 into 2 which I dont want.
I want to be able to "count" apples and oranges. Is there a way to record a particular text in a text formatted cell and count it. e.g. 10 cells, 3 say "apples", three say "oranges", 4 say "plums". I want excel to keep track of the three types of fruit when I change them and give me a running number of each.
View 2 Replies View RelatedI want to find strikethrough text and replace it with blanks. In my sheet there are cells that contain both strikethrough and normal text. I tried using the 'Find and replace' tool, specifying the format. I've attached a picture with the settings from the Replace window.
The problem is that Excel finds the cells that contain strikethrough text, but replaces with blank ALL the cell content. I would like to replace only the strikethrough text from the cell and leave the normal text as it is!
I am in need of a formula.
I am subtracting one number from the other and if the result is negative, “Short” otherwise “Add”, I want to use subtracting result in the formula. So for example A1 has 50,000 and A2 has 40000 so the formula in cell A3, should say add $10,000.
Or something like this, =IF(A1-A2>0,”ADD”,”SUBTRACT”,”&TEXT(A1-A2,”$#,##0.00”)
The solution below to look up numbers in an array formatted as 10 characters as text.
=VLOOKUP(TEXT(A1,"0000000000"),LOOKUPTABLE,2,FALSE)
This has worked well except now I have received the data and the text I want to lookup has been reformatted (previously leading zeros) to the number with trailing spaces, still a total of 10 characters but the above formula no longer works. Is there an easier workaround other than using "Find" to locate the position of the first space.
I had a hard time to put a suitable title to this query, not sure if above is good enough for my query. I am entering combination of text and number in a cell using a formula. I am wondering if it is possible to add formula which can format number such that it is displayed in accounting format. Example:
Expected output = Trial 1,000
Using this formula
="Trial "&Sheet1!A1
where A1 in Sheet1 = 1000
Output is Trial 1000
I have a series of conditionally formatted cells which turn the text in them to red if the value is less than 40. This works fine.
Occasionally however a value of less than 40 will need to be entered along with the letter 'v'.
ie. 39v
I'd still like this to be coloured red, but it's obviously coming out as black.
Is there a way to sort this out?
edited to add : Im actually using a separate cell to enter the value 40 (as the value can change).
How to change a "ddd' formatted cell and change it to a text string (even if you have to use another set of cells)?
I have 3 columns of cells A,B,C.
Column A has dates in it.
Column B has the "ddd" format of the A cells (takes date from A cell and turns it into the day of the week...ex:2/17/2012 into "Fri")
Column C is the one I want to formatt whatever is in the B column into a string, such as "Fri" but with it being text instead of "ddd" formatted.
To input high volumes of dates I change the number format of cells to "00/00/00" so I can key mm/dd/yy without having to hit the slash key. In order to convert these values into an actual date, I've been using the =TEXT function because it allows me to format the text as "00-00-00" which preserves the numbers but inserts a hyphen between each set. From there I use text to columns to break each pair into its own column, and use the =DATE function to combine all 3 into a date.
Is there a way to automate this conversion process in VBA? Alternatively, I'd be open to a different method to input dates in the mm/dd/yy format without having to press the slash key.
How can I interrogate the contents of a cell to determine whether or not it contains a number formatted as text? I intend to run a .value = .value over each such cell to convert it to a number format, but I only want to do this to relevant cells.
View 9 Replies View RelatedIs it possible to delete the work 'Strike' purely based on it's formatting I.E: as having a strike through set against it?
Im thinking it's not! I know you can use 'Find and Replace' for single cells with single words in, but not out of a sentence?
I was wondering if anyone could tell me how to do away with the "Exponential" appearance of numbers (in Excel) when they are formatted as text. I am working with National Stock Numbers and there are no required computations based on them being formatted as a number ... AND ... one of my constraints is that they are required to be formatted as text when imported into an Access database ...
View 5 Replies View RelatedI am trying to get a single cell to display the following:
Last Updated: 3/18/2008 15:08 (GMT+2)
Entering =NOW() in a cell displays the date and time as required.
But entering ="Last Updated: "&NOW()&" (GMT+2)" displays the date and time as a serial number. Formatting the cell to Date does not change the serial number to date and time format.
The only way I have found to get the desired result is to use =NOW() in another cell (F13), format that cell to general to get the date/time serial number, then use ="Last Updated: "&TEXT(F13,"m/d/yyyy h:mm ")&" (GMT+2)" in the required destination cell.
As I said this works, but it strikes me as an inefficient method. Is there a formula I can enter or formatting I can apply to get the desired result without using an addition cell?
The result needs to be in a single cell. Splitting text and date/time into 3 adjacent cells will not work with my worksheet setup.
I have an issue with long numbers (16 digits). To display them correctly in excel I formatted the cells as text. This part works fine, but now for some reason conditional formatting marks different numbers as duplicates.
In my case 3081281170122602 and 3081281170122601 are considered as duplicates by excel.
See the file attached. duplikaat.xlsx
how to convert number into text (acutal formating)
Eg. : 150500
One Lac Fifty Thousand Five Hundred
I am trying to figure out how to create a Macro code in Excel that will delete text file page breaks. Each page break starts with a square in column A and ends with the word continued in column D. I've tried several times, but when I test the code and I highlight the section to delete, it only deletes those specific rows next time. How can I get it to delete the rows from the square to "Continued" throughout the document without making reference to specific cell numbers?
View 3 Replies View RelatedIs it possible to keep ending zeros in cells that are formatted for Text or General?
I have a column with numbers like the following: 264400
I need to format this number for three decimals so it will look like the following: 264.400
I need the column to be formatted for either Text or General. Currency breaks a system.
I have an Excel 2010 spreadsheet that I am using to save several numbers all in the same column. These numbers can range from the several thousands up to billions. The formatting I am using for these numbers is Number (using 1000s separator).
number_forma.png
I am also using the spreadsheet to generate a text string for each of the numbers. I don't want the text string to show the number as it is, I want to shorten the number by only showing the first few digits followed by a "B" for billion, "M" for million, or "K" for thousand. For example, in the text string I want to show 1,600,000 as 1.6B.
In order to shorten the number I use the cell in the column to the right of each number. This cell uses the following custom formatting (which I found by doing a Google search): [>999999999.999]#.0,,,"B";[>999999.999]#,,"M";#,"K";
custom_format.png
As you can see the formatting is quite complex (at least for me it is) but it does what I want it to do.
Here is a screenshot of what the original and custom formatted cells look like:
custom_formatted_cells.png
As you can see the custom formatting works and does exactly what I wan
The next column (after the custom formatted number) is where I put the generated text string for each of the numbers. As I stated above, I want the generated text to use the shortened version of the number (e.g. 1.6B).
To generate the text I use the CONCATENATE function with a reference to the cell containing the shortened number as one of the arguments. For example:
CONCATENATE("SOME STRING ", B1)
Where B1 is the custom formatted cell.
The problem I am running into is, the text that gets generated doesn't show the shortened format of the number, it shows the full number. Here is a screenshot demonstrating what is happening:
concatenate_formula.png
As you can see the generated text is "SOME STRING 1600000000". This is not what I want. I want the generated text to be "SOME STRING 1.6B".
I think I understand what's going on. When the CONCATENATE function references a cell it takes the actual value of the cell and ignores any formatting. (I suppose formatting is just the way you see the data, not how underlying functions receive the data.)
My question is, how can I re-write the CONCATENATE function (or use another function, etc. available to me) to use the formatted version of the cell?
*UPDATE* I have attached my spreadsheet as an attachment to this post (tackyjan_excelforums.xlsx). Please note that it was created and saved using Excel 2010.
I have a cell that calculates an etch time, eg 41.88. The cell is formatted to give me whole numbers and quarters only so that the operators input is made easier, in this case 42.
When I use a macro to copy this to another worksheet, although it appears as 42, the actual cell data is 41.88. Anyway I can get the actual cell data to be 42?
I have data which needs to be formatted with a thousand separator as below.
400.00
1,000.00
250,000.00
How can I do this without it displaying as below
,400.00
I do not want it reflected in the case of hundreds.
Receive worksheets with data in different layouts that needs to be moved into formatted worksheet with unique layout and field size to import in to Access database.
Example of formatted table layout ....
I ran a very simple code that conditionally formatted red any cell sum greater than 12. The macro worked all the way to the end - about 15k rows. After saving and re-opening file only the first 1603 lines had the formatting and the rest did not. Several attempts end with no change in results.
I did the programming in Office 97 but edited and ran it on Excel 2002.
I'm trying to lookup data in a cell formatted as time, the array is also formatted as time but I continue to get the #N/A. Is there a certain format that I should use?
View 9 Replies View RelatedI'm trying to lookup data in a cell formatted as time, the array is also formatted as time but I continue to get the #N/A. Is there a certain format that I should use
View 6 Replies View RelatedI have a data entry field on a form that is formatted for percentages. Sometimes when i key in "10" it will correctly convert it to "10%" but other times it randomly converts it to "1000%". When the error occurs, I'm able to correct it by re entering the value a few times until it displays correctly as "10%".
View 2 Replies View Related