Formula That Multiplies 32 Row Offsets
Apr 14, 2008
I have now a formula that multiplies 32 row offsets. The no of rows of offsets are in CN31:DS31 and the references for the offsets are in DY$71:FD$71. The row offset values range from 1 to 11.
=OFFSET(DY$71,CN31,0)*OFFSET(DZ$71,CO31,0)* ... *OFFSET(FD$71,DS31,0)
There are close to 800 characters in the formula. I want to expand this to a multiplication of 100 factors. This would not fit in one formula, and creating more formulas is tedious and possibly subject to errors. It should be efficient, since this formula occurs 12000 times in my spreadsheet.
View 9 Replies
ADVERTISEMENT
Jun 10, 2013
I have a data entry field on a form that is formatted for percentages. Sometimes when i key in "10" it will correctly convert it to "10%" but other times it randomly converts it to "1000%". When the error occurs, I'm able to correct it by re entering the value a few times until it displays correctly as "10%".
View 2 Replies
View Related
Apr 13, 2007
In short I have two sheets.
Sheet1 ("Test") has 8 columns with the Customer # in column A.
Sheet2 ("Evaluations") also has 8 columns. Customer # in Column A and date of service in Column B.
What I would like the macro to do, is to read through the customer column on Test, then for each customer, paste ALL dates of service from the "evaluation" sheet. Customers have multiple evaluations, so it pastes the first one into the 9th (I) column, the next into column J, etc.
The end product is a "Test" sheet with one customer on each line. Columns I and beyond have all service dates for that customer.
It seems like the below code should work. For some reason, it throws about 100 evaluations onto the first customer, even though they only had one.
or error corrections?
Sub Test()
Dim csr, incrmt
Dim d As Range
View 9 Replies
View Related
Apr 4, 2008
I'm trying to figure a way to calculate numbers in arrears as a part of a sum/average/stdevp.
What I've done so far is create a named range called "x_values" that dynamically adjusts itself to the dates given. What I'm trying to do is create a range that finds the avg of each "X_VALUE", and the previous X_VALUE before it.
I tried =offset(x_values,0,0,roll_factor,1) to do the offsetting; but it just starts at the very top of my range .....
View 9 Replies
View Related
May 10, 2006
I am trying to learn how to use offsets for dynamic charts and having trouble getting the formula to pick up the correct values.
View 3 Replies
View Related
Mar 31, 2009
I am trying to copy three columns of information from sheet1 into sheet2.
When pasted I need the information to be spaced or offset as per below sample.
Sheet1
HTML ABCDEF
1#AnimalDescription
21Dogfour legged fur ball
32Catother four legged
43Horsegsdfgdfgdbfb
54Snakedfgegergeg
65Ratlkjlmlbnm,
76Birdtshgjmgjkk
Sheet2
HTML ABCDEF
1#AnimalDescription
21
3Dog
4four legged fur ball
52
6Cat
7other four legged ...................
View 6 Replies
View Related
Oct 7, 2009
I was wondering if there is a formla that will delete a formula when it has done its calculation, or stop the formula from constantly updating.
I've got a formula
=IF(COUNTA(A1)=1,TODAY(),"")
When something is typed in Cell A1 the cell with the formula will input todays date.
Is there a formula that will stop this formula from updating, as when you go into the file on a different day the date would have been updated.
View 6 Replies
View Related
Jul 30, 2014
I have a situation where I have to curve fit data, this can lead to different formulas being used with varying constants.
Is it possible to pickup a TEXT based formula and related constants from other cells, and then place this into another cell as a functioning formula. For Example
Cell A1 contains the formula as a text string whether it be y=a+bx+cx^2, or y=a+b/x, etc
Cells A2:A6 contain the individual constants, a, b, c, etc
I would then want the VBA to read the text based formula and put it into an output cell as a functioning excel formulae.g
In cell B10: =a+b*A10+c*A10^2
I understand picking the constants up and putting the formula should not be too much of an issue, however trying to insert the variable form of the curve fit is the part that I am struggling with, and am unsure if possible.
View 2 Replies
View Related
Dec 22, 2009
Here is the scenario:
A B C D
BananasApplesOrangesTotal113=A1+B1+C1
I need to reference the formula in D1 with the cells headers names.
In a perfect world, it would take
=A1+B1+C1:
and produce:
=Bananas+Apples+Oranges
View 9 Replies
View Related
Mar 27, 2014
I have an existing formula in a cell linking back to a start date only. determining how to add an additional formula to exclude weekends, and possibly holidays.
View 2 Replies
View Related
Aug 24, 2014
I am trying to use a combination of Concatenate and IF formula to produce an email.
My input.
D4: First Name:
D5: Middle Name:
D6: Last Name:
D8: Organization:
Once all these are filled, I want the formula to produce a result like
FirstName.M.LastName@Organization.com
I have used the following formula.
[Code] .....
Problem is if there is a middle name the formula works fine, but in case where there is no middle name, it produces the following result.
FirstName..LastName@Organization.com
How do I remove the additional (.) in cases where there is no middle name.
Attached File : Email Generator.xlsx
View 3 Replies
View Related
Apr 23, 2009
I'm having some trouble trying to get excel to input a formula into a cell. I'm still a novice at VBA right now, so I don't think my problem will be too much of a brain buster.
I want a formula in Cell A6 (and I already know it correctly works) in this format: =E6&VLOOKUP(I6,'FA-Fund Data'!B$1:C$2000,2,FALSE)&J6
View 3 Replies
View Related
Jul 22, 2014
Is it possible to write a formula that skips x number of cells and have the formula autoincrement as usual. For an examples lets say I want to skip 3 cells and I have entered in the cells listed:
A1= "1"
A2= "2"
A3= "3"
Then I type in the simple formula in the cell
B1= "=A1"
and then drag down but it skips 3 cells so then
B5= "=A2"
B9= "=A3"
If it didn't skip then
B1= "=A1"
B2= "=A2"
B3= "=A3"
this is just an example as I will be writing more complex formulas and need some thing that I can write into the formula so that it skips.
Something similar to this B1 "=A1(skip3cells)"
View 4 Replies
View Related
Jul 16, 2007
I would like to copy a formula in a cell and then paste only the text of the formula, but I can't figure it out. Basically, I would like to avoid going into the cells and absolute referencing or hitting F2, then copying the text.
When I hit "Ctrl C" to copy the cell, then hit "Alt/E/S/F/Enter" to paste the formula, it is just like a regular copy/paste formula-wise in that the references move.
View 10 Replies
View Related
Apr 9, 2009
I have some student marks in columns B to F. If some one get below 40 marks he fails and the subject in which he has been failed will come in Remarks column. If he has passed in all subjects remarks column will show Pass.
To bring failed subject initial in Remarks i have to create 5 additional column and then thru Concatenate i joined them.
Is There any formula to show fail subject in Remarks column without creating 5 additional columns?
View 14 Replies
View Related
Aug 12, 2007
This task joins a string together based on a number of characters per cell in the range.
I want to isolate one range, Col N, and add an IF condition to it.
There may be other issues preventing this from happening, e.g. the number of IF that exist in the complete formula. I will isolate the current cell and its requirements and then post the entire formula at the end for reference....
View 9 Replies
View Related
Jan 31, 2008
I am looking to average a range of cells which won't always be the same size. How do I create a formula array that will omit empty cells in my formula.
View 9 Replies
View Related
Jun 1, 2006
I recently added a formula to a spreadsheet with som complicated formula. It worked ok and I saved the sheet. Now it takes 5 minutes to open the sheet and when I try to do anything,like delete the inserted column the program locks up giving a no responding message. I can do without this column if I have to.
View 4 Replies
View Related
Feb 23, 2008
I am using vlookup to get a cell value from another sheet, but if the cell has "&" or "/" I need to substitue "&" and "/" with "and" so that the cell can be added later to a url.
i am using =VLOOKUP(a1,Sheet2!A1:W17968,6) to get the value of a1 in sheet 2 and return the value of column 6
this will return "Audio Cables & Leads" but i need it to say Audio Cables and Leads
I need the formula to also check and replace "/" with "and" as well so cables/wire will be Cables and wire
View 9 Replies
View Related
Dec 19, 2012
I have a spreadsheet that contains a list of dates: What I need is a formula that will count the number of cells that hava a date more than 6 months old. I also would like the field automated so I don't have to change the date manually every day.
=COUNTIF(S5:S593,"<2012/06/18") This formula will give the correct read out, but I must change the date manually.
My attempts at adding a =today() command in place of the date result in 0 being the result (not correct)
This is what I have tried: =COUNTIF(S5:S593,"<"=TODAY()-"183")
View 8 Replies
View Related
Apr 3, 2014
In my attached spreadsheet example below, in the Rollup Data sheet, I have a formula (Cell: C17) that will give me the actual cost totals that has been invoiced on WBS Element (DWRRI-BW096-231) for a total of $35,004.81.
What I need the formula do is run a redundant check procedure on my new WBS Element (DWRRI-BW096-231) actual cost total formula in the Rollup Data sheet (Cell: C17) against/vs. what the SAP system provides in the raw SAP Excel export contained in the PTD-Actual Cost sheet for the WBS Element (DWRRI-BW096-231) actual cost total of $35,004.81 (Cell: F9) that's highlighted in the yellow row.
In the Rollup Data sheet (Cell: C18), I need this formula to perform a similar function the as the previous formula above it (Cell: C17), but it this formulas function (Cell: C18) would have a separate operation that would only look for and return the single/sole WBS Element (DWRRI-BW096-231) actual cost total contained in the PTD-Actual Cost sheet (Cell: F9).
In the Rollup Data sheet I could then compare my two WBS Element (DWRRI-BW096-231) actual costs totals, the first from the automated addition of all the individual matching WBS Element actual costs into an actual cost total (Cell: C17), the second (new formula I'm requesting) from the matching and return function of the single/sole WBS Element actual cost total (Cell: C18).
So, if the two separate WBS Element actual cost totals (Cells: C17 vs. C18) both equal $35,004.81, the formula in C17 is a success and has correctly identified and added all the actual costs contained in the PTD-Actual Cost sheet, but if the two separate WBS Element actual cost totals (Cells: C17 vs. C18) both do not equal $35,004.81, the formula in C17 failed for some reason and has not correctly identified and added all the required actual costs contained in the PTD-Actual Cost sheet.
How to Add Total $ Value Formula into an Existing SUMIFS Formula.xlsx
View 2 Replies
View Related
Aug 7, 2014
I am trying to create a graph of my data at the end of each month. The graph will show a count of the number of instances of each category in the data.
For example:
A1 =TODAY()B1 =MONTH(A1)
Column A from A3 down = 1,2,3,4,W,H,L
Column I between I2 and I140 = multiple instances of 1,2,3,4,W,H,L
July
=IF($B$1=7,(COUNTIF($I$2:$I$140,$A3)),"0")
=IF($B$1=7,(COUNTIF($I$2:$I$140,$A4)),"0")
=IF($B$1=7,(COUNTIF($I$2:$I$140,$A5)),"0")
=IF($B$1=7,(COUNTIF($I$2:$I$140,$A6)),"0")
=IF($B$1=7,(COUNTIF($I$2:$I$140,$A7)),"0")
=IF($B$1=7,(COUNTIF($I$2:$I$140,$A8)),"0")
=IF($B$1=7,(COUNTIF($I$2:$I$140,$A9)),"0")
=IF($B$1=7,(COUNTIF($I$2:$I$140,$A10)),"0")
My problem is that when it comes around to August or the next month, I want the final count of July to be fixed/frozen so it won't change from the 1st of the month. I can then use the July column's data for my graph.
Can a formula convert itself into a value or freeze itself after certain criteria has been fulfilled?
View 7 Replies
View Related
Oct 22, 2013
i have two excel files which are data and master..both files will be use for salary calculating.. the vlookup formula will be use in master files for dragging the salary data from Data files..the formula as follow VLOOKUP(B4:B225,'D:Salary[Data.xls]AUG'!A$1:F$65536,6,FALSE))
the vlookup working fine to me.. but my problems is i want the data to be auto calculated when they have same value in two columns.. or if the name is similar/match in two columns (one for salary and another one for overtime), the salary should be auto calculated.
Data files will contain of these:
a:Employee ID
b:employee name
c:Employee salary/Overtime
Master files will contain of these:
a:Employee ID
b:Emplyee Name
c:Employee Nett Salary (that will be dragging from Data files)
is there any formula that i can used to combined with my vlookup formula?
View 4 Replies
View Related
Feb 4, 2014
2 formulas that I need for my work (related with linear recurrences; this is serious work). First, I would like to know if is it possible to write a formula (or a set of formulas) that allows to write in a first column, in the first cell, the number 1 and in the following m cells, m distinct numbers chosen in a set S of n numbers (n > m); in the second column again the number one, and another set of m distinct numbers chosen in the same set S (here the order of the elements matters which means that the set {1,2} can be written as (1,2) and (2,1)). And I would like to do this until all the choices of m (ordered) numbers chosen in the set S are exhausted. Example: S = {2,3,4} which means that n=3. Suppose m=2. Then the columns would be
111111
223344
342423
The second formula I'm searching is (I think) a logical formula. What I would like is a formula that checks if the numbers in a fixed number of consecutive cells of a column are distinct and also non-null. If that's the case the formula should assign TRUE and if (at least) two cells are equal or (at least) one is zero, it would assign FALSE.
View 2 Replies
View Related
Mar 5, 2014
I'm wondering if it's possible to write a formala that if a certain condition is met, performs a formula referenced in another cell. For example: Column A contains a list of formulas. In column B is the condition, let's use Work Type as an example. The result (or the formula I need) would be in column C. So if the work type is "Type1", then the formula in the corresponding column C cell would perform the formula in cell A5. If the work type is "Type8", then the formula in the corresponding column C cell would perform the formula in cell A2.
Is this possible to do without VBA?
View 6 Replies
View Related
Dec 19, 2008
I currently use the following formula: =workday(H21,H23,J20:J34) which calculates my date based the date entered in cell H21. While testing I realized that I needed to add another variable to the formula for a specific scenario. When my Date in H21 is less than todays date I require another workday formula to be calculated. How can I add this if statement to the existing formula?
View 2 Replies
View Related
Feb 2, 2009
I need to create a formula that looks at 2 adjacent cells. If both cells show 'YES' then I need the 3 cell to show 'YES'. If either/both of the 2 adjacent cells are blank then the third needs to be blank.
View 2 Replies
View Related
May 29, 2009
To get cell to display results of formula I must edit (F2) and hit enter. Is there an easy way to do this in bulk rather than editing and hitting enter on hundreds of cells?
Example of formula:
=IF(COUNTBLANK(K2)=1,"",CONCATENATE("*** ",K1,": ",K2," "))
View 5 Replies
View Related
Sep 16, 2009
I want to use the If formula but want the value if true/false to be another formula, not just a set value. Here's what I came up with (obviously wrong, please excuse my lack of experience) =IF(D2>C2,"=(D2-C2)*5","=((60-C2)+D2)*5 ")
View 2 Replies
View Related
Oct 1, 2009
I have two cells. The first cell has the formula:
=CONCATENATE("D",TEXT(MATCH($B$6,'Zip Ranges'!$D$1:$D$157,0)+1,"0"))
which results in a col and row number (such as D65).
The second cell has the following formula:
=INDEX('Zip Ranges'!$A:$B,MATCH($B$6,'Zip Ranges'!D1:$D$157,0),2)
^^
I wish to replace the 'D1" in the Match function with the results of the first cell's formula.
I assume Indirect would work, but I don't know how to code the formula to use it.
View 4 Replies
View Related
