I'm working with Pivot tables, and have run into a issue with counting unique cells, when there are multiple like cells. Here is an example
Account
Sally
Joe
Sally
I need to know how many accounts there are (answer=2)
When I use Pivot table, Count of Accounts, it returns a count of 3.
I have created a pivot table and want to get a count of values in a specific column. I have a list values in column X of my Data, then in column Y their is Y/N answers.
Colour
In Stock
Red
Y
Blue
Y
[code].....
I would like to count these items so they are constantly updated in my pivot.
Colour
In Stock
Out of Stock
Red
2
0
Blue
1
1
I am trying to find a way to count the total number of pivot fields in a pivot table so I can remove ghost pivot items that are no longer in the pivot table data. My code for this subroutine is as follows;
Sub RemoveGhostPivotItems()
Dim ghost As PivotItem
Dim pt As PivotTable
Set pt = ActiveSheet.PivotTables(1)
pt.ManualUpdate = True
For Count = 1 To 10
On Error Resume Next
For Each ghost In pt.PivotFields(Count).PivotItems
ghost.Delete
Next ghost
Next Count
pt.ManualUpdate = False
End Sub
My code makes an assumption that I have 10 Pivot Fields or less. It would be nice to actually know the number of Pivot Fields so my "For Count" Loop would be more efficient. In otherwords;..............
how I stop the following code from producing both the sum and count of the data field.
Set Pt = PTCache.CreatePivotTable(TableDestination:=PTOutput.Cells(1, 1), TableName:="PivotTable1")
With Pt
[Code]....
I think the count part (not sure of correct nomenclature) is automatically being generated by the create pivot method and I am not sure how to switch it off.
I have created a pivot table from a spreadsheet that had around 27 rows for each employee (i.e: each paycheck the employee received). The pivot table turned out great, but I need to know how to make it count how many employees are in each department and show it in the table.
View 9 Replies View RelatedMy requiremntis to get the number of count for the specific pivot data column.
In the EXCEL I am selecting "reason" and "reason_details" as the " range" and creating a Pivot table based on it.
The resulting PT is not giving me count for each set.
In the attached Excel. I have DATA sheet and PT sheet ( whih is created by Pivot ) and
Required PT. My desired requirement is in the Worksheet 'REQUIRED PT".
How can I use a macro to count the number of 0 values in a particular column (one of the Values columns) of a pivot table?
I'd like to use the .PivotTables(1) if possible (rather than referring to the whole sheet range column).
the attachment is a sample spreadsheet of what i am trying to do. I would like to create a pivot table so that for each site I can list all of the organic suites individually. Then show a count of only 1 for each site, even when there are several counts for each site. And then for this to be related to a cost of each of the suites so that I can get a total cost for each site.
eg:
site name
organic suites suite cost
o1 x
o2 y
o3 z
Total A
etc
Is there a way to average and counta the values in the row of a each category in pivot table?
Example
Pivot Table
Fruits
Grad Total
China
UK
[Code]....
Is this possible?
Fruits
Grad Total
China
UK
USA
UAE
[Code]....
Is it possible to create a Sum of Count Calculation on a Pivot Table?
View 6 Replies View RelatedI would like to have a pivot table that will count the number of responses I get for a certain question
For example on the attached book I would like it to look something like:
a
blue 1
red 1
yellow 1
green 1
aa
green 2
yellow 1
and so on, I am sure this is possible just not sure how to make it happen.
I have the following data:
TRX_IDQTYCUST_ID892486021-67.991623230892486140-35.411623230892486378-29.271623230892486515-60
.711623230892488006-69.081623230892488082-43.261623230892486668-31.091623230892486794-27
.0562118898892546057-42.829337675892487417-19.331623230892487513-33.251623230892488890-33
.61719407892543537-13.891623142892544321-11.021623142892487602-18.921623230
Would like to know the number of unique customers (CUST_ID) have purchases and the sum of those purchases and how many transactions:
CUST_ID Sum of QTY Count of Transactions
50 $2000 1500
I cant seem to find how to do unique Cust using a pivot table - it just gives me a count of cust which is the same number as the number of transactions.
The pivot table has only two columns, the first is the identification number and the second is the count of the identification number. I am trying to get a count of the number of identification numbers, not how many times it was entered in the spreadsheet (some numbers are entered more than once on different days). It currently looks like:
Column A Column B
00000001 1
00000002 1
00000003 2
00000004 1
00000005 3
Grand Total 8
I'm trying to arrive at 5 for the answer, so that each number is only counted once even if used more than once.
I have 2 columns. One with a store number. The other with an item. I need to get the count of each item for each store. So:
Store, Item
1, Cashier 1
1, Cashier 2
1, Cashier 2
1, Photo PC 1
1, Cashier 1
1, Cashier 2
2, Photo PC 1
2, Cashier 1
2, Cashier 2
2, Cashier 1
2, Photo PC 2
2, Photo PC 2
2, DriveThru 1
3, Cashier 1
3, Photo PC 1
3, Photo PC 1
3, Photo PC 2
I would like to get to
Store, Cashier 1, Cashier 2, Photo PC 1, Photo PC 2,
1, 2, 3, 1, 0
2, 2, 1, 1, 2
etc....
How can this be done?
I am trying to calculate a ratio for Hours per Ticket by month. I have a pivot table that COUNTS tickets and SUMS hours per month. I was hoping to create a calculated field to the jist of COUNT(Tickets) / SUM(Hours), but this does not work because calculated fields aggregate data.... I was hoping to keep it all in a pivot table so that I can still use slicers.
Pivot Table:
Rows: Years, Months
Values: Tickets (Count), Hours (Sum)
Month
Tickets (count)
Hours(sum)
Throughput (Calculated)
2013
Apr
65
22
2.97
[Code] ..........
I have a spreadsheet with several records for each person's name.
I want to have pivot tables based on various columns, with the data field being a count of unique occurrences of a person's name.
When I set up a basic Pivot, it counts each occurence of the person's name.
I started a pivot table for our budget and on the left side I have the account names and about 4 columns of applicable account codes to which I turn on and off when needed. On the right side I have all the budget numbers divided by quarter and halfs. On the right side, I can drop any list of numbers and it does the sum but for some reason, when I drop my 4th quarter numbers, it gives me a count and not sum. How do I change it to sum?
Second problem: I have grand totals number going down the columns meaning I have a sum of all my 1st Quarter numbers but I do not have them going across each line on row. How do I add that?
Third problem: I forgot a list of account codes to be put on the left, how can I add it?
I have a worksheet with a list of employees and the workgroup they belong to, along with other data like manager, start dates, etc. Recently a couple of the workgroups were duplicated (change in managers), so these employees are showing up on two rows even though the workgroup has the same name. The only differences in the two rows are the workgroup effective start and end dates. I need to be able to count, in a pivot table, the number of unique employee/workgroup combinations there are per workgroup. I can add columns to the sheet, but it's a dynamic set of data that will grow each time it's refreshed...
View 9 Replies View RelatedI can not get my Pivot Chart to count, sort and categorized my data. I have included a sample file for your viewing. I basically want the data in cells C2:E18 counted, sorted and totaled by categories and locale. I thought the pivot charting was simple, but I'm having quite a challenge with this one. The pivot chart data should reflect as my sample indicates in cells E24:K27
View 3 Replies View RelatedI'm trying to create a pivot table that will count how many employees have completed a Learning Plan. This task becomes complex (for me) because each learning plan has multiple Courses, each Course has a status of "Completed" or "Incomplete". A Learning Plan would only be considered "Completed" if all the courses within that Learning Plan were completed. In doing some research, it looks like I'll need to create another column of data, that shows per employee, per Learning Plan, if the entire Learning Plan has been completed, but I'm not sure of the best way to go about this. Please find SampleData attached.
View 5 Replies View RelatedI have a pivot table that has this structure:
product-id fecha entrega SUM of quantity
Q-NATA90 22-jun 15 13-jul 15 03-ago 15
Q_nata is product code (fields)
22-june, etc are the dates of the individual orders (fields)
15 is the amount of each order (data)
I tried to set an offset function in a cell outside the table that, refers to the first DATA cell (upper 15) and returns the date of the order, like this:
=DESREF(IMPORTARDATOSDINAMICOS("cantidadoriginal";$A$3;"producto_id";"G-CLA2775M";"fechaentrega";185);0;-1;1;1)
*DESREF is offset in spanish, importardatosdinamicos is IMPORTDYNAMICDATA or something like that.
But excel tells me thereīs an error in the formula and it doesnīt let me use it...I canīt find the error.
should i use pivot table or transpose function ...
View 9 Replies View RelatedResouce Capacity Management .xlsx
How do I make my Pivot Table count/Sum the Threshold of each resource within department is within our 80% to 120% threshold?
I have a source data tab laid out like this:
QC Date.......Policy#......Associate.......Pass/Fail......1stError.....2ndError.....3rdError
QC'ers can enter up to 3 different error types committed on a single failed policy, thus the reason for 3 error fields, even though all 3 fields offer the same value list selections (ie ErrorTypeA, ErrorTypeB, ErrorTypeC......). A policy, whether it has one error or three errors assigned, should only count as a single fail against the associate.
My problem comes into play when attempting to pivot the data. I would ideally like to see the pivot table in this format:
(filter)Associate
(filter)QC Date
...
ErrorTypeA.......Count
ErrorTypeB.......Count
ErrorTypeC.......Count
ErrorTypeD.......Count
Where the "count" is the total number of occurances of that error type across all three error fields - 1stError, 2ndError, 3rdError.
But since 1st/2nd/3rd error fields are different columns, I am unable to do a single count.
My pivot ends up looking something like this:
1stError.....ErrorTypeA.......Count
1stError.....ErrorTypeB.......Count
1stError.....ErrorTypeC.......Count
1stError.....ErrorTypeD.......Count
Then repeated for the 2ndError and 3rdError fields.
I have attached an example of what i am trying to do. I can work out how to calculate unique entries by putting in a formula under a pivot table, but is it possible to select an option in the pivot table settting which will give this result?
View 2 Replies View RelatedHow can I change my Pivot Table Field List to produce Sum of the values rather than Count of Values?
View 1 Replies View RelatedI have a simple pivot table that is types by state. I want to know how many types are in each state. In the attached image the answer for Alaska is 5, for Arizona 5, for Arkansas 1, etc. How do I get Excel to tell me that for each state?
I'm using Excel 2010. I have PowerPivot installed but really don't know how to use it yet.
I have data that has a customer name and the month that they were taken care of" (of course not spaces
Customer Month
Smith January
Smith January
Mark January
Suzy January
Smith February
Mark February
I want a pivot table to say:
Month #customers
January 3
February 2
but when I do the count it adds the total number of customer names and gives (it is counting smith twice in January
Month #customers
January 4
February 2
I was reading something about doing the count (so it shows 4) and then doing an index within the count but I keep just getting 1 as the value (for both months).
I tried doing a formula in the document that said =IF(ISERROR(MATCH(A2,$A$1:A15,0)),1,0). basically looking to see if the name is above the location I am looking at and if it is to put a 0 if not put 1 and then do a sum of that column....trouble is that when a customer has orders on more than one month, the second month is coming up with a 0 instead of a 1 (and this happens quite often).
I am not sure what to do. if the customer shows up in more than one month I want them to count towards the unique count of both january and february...we look at each month separately.
I've recorded a macro that clears a worksheet, fetches data from an Access Table and then creates a new pivot table. The Pivot Table Fields are summarized by "sum" and this worked the first few cycles for the macro. Now it is returning the Pivot Table Fields summarized by "count". Can an option be inserted into the existing code to specify "sum"? Here is the
ActiveWorkbook.PivotCaches.Add(SourceType:=xlDatabase, SourceData:= _
"'raw data'!R1C1:R205C12").CreatePivotTable TableDestination:="", TableName _
:="PivotTable14"
ActiveSheet.PivotTableWizard TableDestination:=ActiveSheet. Cells(3, 1)
ActiveSheet.Cells(3, 1).Select
ActiveSheet.PivotTables("PivotTable14").SmallGrid = False
ActiveSheet.PivotTables("PivotTable14").AddFields RowFields:=Array("Name", _
"FIELD_ASM_USER_NAME", "Data")
With ActiveSheet.PivotTables("PivotTable14").PivotFields( _
"SumOfSumOfSumOfCYYTD_SHARE_QTY")
.Orientation = xlDataField
.Position = 1
End With..................................
I have data set up like the example but then for 1797 lines.
D39BKYes
D39BKYes
D39BKYes
D39BKYes
GHFLBNo
R80FANo
R80FANo
[code].....
What I need to get in a pivot table is: two columns or rows (Yes / No) and the unique count of the code.In this case is should show Yes: 2 and No: 3
