Pop Up All The Time When Enabling Macros
Feb 10, 2010
I have a workbook with that contains macros on a worksheet. When I open the worksheet, I sometimes forget to enable the macros.
Questions
1.Sometimes I get the message about macros being in the file that I'm opening and sometimes I don't - I don't understand why it doesn't pop up all the time and be consistent.
2. If I don't get the pop up screen or if I do but forget to enable the macros, I get reminded when I try to run a macro. For example, I have a check box and try to check it but I get the message that the macro has to be enabled. So I enable it, but the macro doesn't run. I have to uncheck and then recheck the box to get it to run.
View 9 Replies
ADVERTISEMENT
Aug 26, 2009
I have an Excel 2003 program that contains macros. One of the macros hides certain command bars and disables the worksheet menu bar. On close the opposite is true. The problem is, if a user uses the disable macros when opening then the worksheet menu bar and other command bars are still available. I would like to hide all of the data sheets and display another sheet that would normally be hidden displaying a message that the macros have to be enabled for the program to work correctly if disable macros is chosen. When the enable macros are used I would like the Error page to be hidden.
View 6 Replies
View Related
Feb 11, 2010
I recently reformatted my hard drive. When I re-installed Office 2007, I was unable to run a Workbook that has a Macro in it. First, I went to Add-ins and added the Solveradd-in. When I opened the workbook, I enabled Macros. However, all I get is a maessage saying that the MVB did not compile. I know there are some things you have to do to solve this, but I cannot remember the procedure I went thru 2 years ago to get this to work. Does anyone know what steps I must take?
View 8 Replies
View Related
Apr 21, 2009
i am trying to work out why i always have to enable macro's when i open some of my files that i have macros in, as i save them as enable macro file. I run excel 2007
as there are files i want to open without clicking on the enable button.
View 3 Replies
View Related
Feb 17, 2010
I am using the code below to open multiple workbooks in their own instance of Excel.
On my system, as well as most of the ones I've tested it on, enabling macros in the "parent" workbook, i.e. the one that contains the code, leaves them automatically enabled in the new session of Excel, as though the settings are carried over.
However, recently I've found a few systems where this is not the case. Enabling macros in the parent workbook opens the others, and then I have to enable macros again in each of the new sessions. Is there a way to fix this? All of the systems mentioned above have macro settings set to "disable with notification" and this cannot be changed.
View 6 Replies
View Related
Aug 25, 2006
if you open a workbook & choose not to enable macros, is there any way to later change your mind & set macros to enabled without having to close & reopen the workbook?
View 9 Replies
View Related
Jun 17, 2014
Is it essential to enable macros in whatever the pc i use, if i am interested in using a form which i created in a different pc with macros. is there a way to avoid this. because each and every time i dont want to change the settings in excel in other pc. the form which i create will be filled by my colleagues and they have to send it back to me.
View 2 Replies
View Related
May 13, 2007
I have a sheet which needs to run a macro only if certain selected cells are TRUE. The TRUE cell indicates that my colleagues have updated their spread sheet. So then i can go run my macro. But i would like to automate this process. What code would I need to Automate If cell a1 = TRUE run macro? and IF cell A! does not = TRUE do nothing? Bearing in mind this will be all run with Reuters in the background.(which is VERY annoying)
View 9 Replies
View Related
Mar 27, 2008
The code from this page works perfectly when I am running one macro at a set interval: [url]
However, when I try to run multiple macros at different set intervals the order of execution gets messed up.
For example, I need macro1 to run at 00:00:30, macro2 at 00:00:45, macro3 at 00:01:00, then macro1 at 00:01:30, macro2 at 00:01:45, macro3 at 00:02:00 and so one.
View 4 Replies
View Related
Mar 13, 2013
I have a 5K Excel 2010 workbook with VBA code that until yesterday, took about 30 sec. to run.
Today, after installation of WIndows7 Home Edition automatic updates, the running time has increased to about 4 min.
View 6 Replies
View Related
Nov 11, 2008
I have a worksheet that I protect from cell deletions by disabling the command function for 'delete' using the following
CommandBars.FindControl(ID:=292).Enabled = False
I execute this code in two subs:
Private Sub Worksheet_Change(ByVal Target As Range)
CommandBars.FindControl(ID:=292).Enabled = False
...
and
...
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
CommandBars.FindControl(ID:=292).Enabled = False
...
all fine and good, works great only problem is...
once disabled this function is NOT re-enabled when I leave the workbook.
When the sheet deactivates I run this:
______________________________________________________________
Private Sub Worksheet_Deactivate()
CommandBars.FindControl(ID:=292).Enabled = True
End Sub
____________________________________________________
that works fine while I am changing worksheets within the workbook.
But it doesn't do for this function to remain disabled even after I close the workbook and then it's disabled in all the other workbooks.
What I need is to have the code re-enable this function when the workbook closes or when I activate a different workbook so that the function is only disabled within the specific worksheet of the specific workbook and it remains enabled everywhere else ESPECIALLY after I close that sheet and workbook where I have it disabled!
I tried this:
______________________________________________________________
Private Sub Workbook_Deactivate()
CommandBars.FindControl(ID:=292).Enabled = True
End Sub
____________________________________________________
View 9 Replies
View Related
Feb 17, 2007
I have a userform with, amongst other controls, a ListBox1 and a CommandButton1.
I have set the CommandButton1 to enabled = False in the properties and need it to be enabled when at least 1 item in the ListBox is selected (the ListBox is multiselect).
I have the following code, but it is not working.
Private Sub ListBox1_Click()
CommandButton1.Enabled = True
End Sub
Both controls are in the same userform and the names correct.
View 6 Replies
View Related
Mar 23, 2007
I have a shared workbook with four buttons executing different macros. Problem is that some of the users should only be able to use two of the buttons. To avoid that they accidently press the "restricted buttons" i would like a password (or keyboard shortcut) to enable these.
View 9 Replies
View Related
Jan 6, 2009
I need to use to prepare for analysis a large set of individual participants' Excel data files collected using a psychological reaction-time experiment (a modified Stroop task). This experiment was created using a program called Superlab by Cedrus, so I posted an inquiry at the Superlab forum [url]. Their tech support suggested I might need to use macros in Excel but couldn't offer further assistance. I'll try to briefly describe (a) our Stroop task, (b) the operations I'm trying to carry out, and (c) the format of the individual Excel files,
Our Stroop task: The participant gets some instructions and practice trials, then a series of stimulus words are presented one word at a time in the center of a computer monitor in one of several colors. Word presentation order is randomized for each participant. The participant must press a key corresponding to the color of each word as quickly as possible. For each keypress (including the spacebar, pressed on instructions screens), the reaction time (in msec) is recorded in their Excel spreadsheet under the 'Reaction Time' variable. The 'Error Code' variable indicates whether the participant pressed the correct (C) or incorrect (E) color key in each trial. There are 8 types of words for a total of 48 trials. (Actually, 4 sets of emotion words and 4 sets of control-animal words, each set composed of 6 words each. The task basically measures how much peoples’ attention is captured by emotionally relevant cues in the environment.)
For each participant's data, I need an efficient way (macros?) to:
(1) clean it [i.e. discard or ignore the instruction & practice trials as well as trials where the participant was too impulsive (reaction time < 100 msec), too distracted (rt > 3000 msec), or gave the wrong color response (Error Code= E)]
(2) determine whether enough valid trials remain for further analysis (>39 trials), and if so:
(3) calculate a mean reaction time score for each of the 8 word types [where denominator for each word type is based on # remaining (non-discarded) trials for that word type]
(4) merge each participant's summarized data as single rows in a common spreadsheet (for importation and further analyses in SPSS), like this:
---------------------------
ID#...... MeanRTW1.......MeanRTW2...... (etc. for word types 3-8)
101.......1056................2013...............
102.......2148................2594...............
103...
---------------------------
Excel File Format: I've attached a sample file, and here's a simplified overview of a spreadsheet (irrelevant columns and some rows removed). First the ID number is recorded (e.g., 393E), then some unnecessary junk (exp name & date, intro, practice, instructions), then data for the 48 actual trials of interest:
-------------------------------------------
........A...............B..................C.................D............
1 393E
2 stroop.xpt
3 Wed Jan 1, 12:33:00 2008
4
5
6 Trial Name.....Trial No..... Error Code.....ReactionTime
7 introduction..... 1................C............561243
8 practice.......... 2................C............... 2062
9 red-worried........14.............C................1001 (*the first practice trial)
10 (9 more practice trial rows, deleted here)
19 instructions........3..............C................5000
20 red-chicken......19..............E............... 1205
21 blue-tense.......32...............C.................782
* (46 more actual trial rows, deleted here)
--------------------------------------------------
To clarify:
-The variable 'Trial Name' indicates nominally what stimulus was presented for each trial.
-The variable 'Trial No.', indicates the unique numerical marker for each stimulus word. (It probably should have been labeled 'Word Type'. It doesn't reflect the order of stimulus presentation. E.g., the word "tense" is always 'Trial No.' 32 for all participants, regardless of when it presents.)
-A subset of actual trial words (e.g., worried) were also used for the 10 practice trials. Thus, the 10 practice trials must first somehow be discarded or flagged to be ignored before calculating average reaction times for the remaining 48 actual trials.
View 14 Replies
View Related
Feb 14, 2014
I am trying to edit the data in the actual pivots rather than editing in the data source. i know there is vba code to enable pivot table editing.
How to enable this.
View 2 Replies
View Related
Apr 4, 2014
I bought a Surface 2 tablet. When I go to "settings" in the Trust Center it does not show any option to enable Active X.
View 3 Replies
View Related
Mar 25, 2012
I have some command buttons on a worksheet that I would like to disable, preferably make not visible, until a specific person logs in. I already have code to display worksheets, or hide them, depending on who is logged in. I would like to just add this code to the end of the login procedure, to make these buttons only visible when that person is logged in.
View 3 Replies
View Related
Mar 3, 2013
Here i am attaching the excel sheet where macro is enabled. I have added macros in last spread sheet (Consolidated) everything is working fine. Whats messing is i have copied a macro for the entire workbook, which will disable Copy/Pase/Cut option to all engineers. But problem is its disabled for me as well, every time i have to delete the code for copy/cut options. I just want cut/copy option in the last worksheet (Consolidated) where i can get all the result with out touching the rest of the sheets.
View 3 Replies
View Related
Apr 2, 2014
I have a sheet with around 3,000 rows of data. I need to be able to enable/disable different comibinations of three checkboxes based on the value of a cell in column D as follows:
If Band says £0k - £75k then all three check boxes should be disabled
If Band says £75k - £250k then the Step 1 check box should be enabled but the Step 2 and Step 3 check boxes should be disabled
If Band says £250k - £500k then the Step 1 and Step 2 check boxes should be enabled and the Step 3 check box should be disabled
If Band says £500k plus then all three check boxes should be enabled
When a checkbox is disabled I'd like it to appear visible but greyed out so it is obvious the option is not available, maybe via conditional formatting. I don't know if this can be achieved within any code rather than having to manually add conditional formatting afterwards?
I've attached a sample to demonstrate. Is this possible to achieve? I'm open to alternative approaches as well if this makes things easier to do. The mere idea of adding 9,000 plus check boxes if already scary!
View 8 Replies
View Related
Mar 18, 2014
A coworker just ran something by me that i'm quite frankly baffled by. After running a macro, the undo function becomes disabled up to the point of when the macro was ran. I've done a quick search through the forums and can't seem to find this question so i thought i'd ask.
Is there an option to toggle somewhere or 3rd party addon that keeps Undo enabled after running a macro? On a similar topic for my own curiosity, what's the reason that it disables?
View 3 Replies
View Related
May 8, 2012
I'm looking for enabling an excel file with a password that prevent it to be copied on an another drive.
View 1 Replies
View Related
Mar 24, 2014
I want a specific workbook to be always on manual but when I open other workbooks I want them to remain on automatic even though the first workbook is set on manual through vba code. Is that possible to be done?
This is the code I run:
Private Sub Workbook_Activate()
With Application
.Calculation = xlManual
.MaxChange = 0.001
.CalculateBeforeSave = False
[Code] .....
I know that Application. Calculation refers to all open workbooks but I don't know the code to specify the manual calculation to this workbook only while others are open.
View 7 Replies
View Related
Jul 28, 2008
I have a user that keeps a maintenance log in an Excel worksheet and sends an updated copy once a week to a board member. Two weeks ago, the board member started complaining that he was prompted to enable/disable macros on opening and became worried when my user stated that no macros were used in the book. He is now concerned that we have sent him a virus.
I know the file is clean because I've scanned it, and when I look at the file in VB, there are no modules or classes present just the Sheets 1-3 and the ThisWorkbook file. None of these objects have any code in them. My user does have some macros in PERSONAL.XLS but they are not used in the workbook in question.
No one else gets the prompt for enabling/disabling macros. Even if I set my security to prompt for any macros, I get no message. I'm convinced that there must be some setting in his Excel that is causing this individual to get this message. Is there anything else other than a macro that would cause this?
View 9 Replies
View Related
Jul 23, 2005
What is the commands or script for deleting a macro automatically using
another workbook macro.
View 9 Replies
View Related
Jul 14, 2008
Is there a way to hide a macro from the list where you choose which to run, but not in the VBA editor? The userbox I just created calls upon 2 different macros, and has a macro to bring up the userbox. I need a way to hide the macros in Module3 from selection, but keep the macros in Module4 available to choose to run.
View 9 Replies
View Related
Dec 19, 2008
I have a worksheet which contains START TIME in column A, then TIME USAGE in column B and END TIME in column C. User enters start time, followed by the number of time usage in minutes, how could i possibly display the end time automatically in this scenario? how do you add the entered time usage to the start time to display the end time? Say if I enter 1:00 AM at start time and 00:15 minutes on time usage, how can 1:15 AM be displayed on the end time automatically?
View 2 Replies
View Related
Dec 14, 2009
I have two macros. Macros 1 opens another excel file, counts the number of rows it has, inserts that number of rows into the master file and then copies the data over. Key code as follows (x3 for 3 worksheets)...
For k = 1 To numrows
Selection.EntireRow.Insert
Next k
Macros 2 'cleans' the appended data by systematically going through each row, checking if certain cells have data, and if not deletes the rows. Key code as follows (x3 for 3 worksheets)...
For l = lastrow To 12 Step -1
If WorksheetFunction.CountA(Range("B" & l & ":C" & l)) = 0 Then
Rows(l & ":" & l).Select
Selection.Delete Shift:=xlUp
edelrows = edelrows + 1
End If
Next l
Here's the weirdness. macros 1 runs fairly quick the first time out (few seconds). Macros 2 takes about 2 minutes to run (which I'm fine with). However, when I run macros 1 AFTER running Macros 2, Macros 1 goes from taking a few seconds to a few minutes.
View 11 Replies
View Related
Apr 13, 2007
how to use excel 4 macros. I do not even know where to put them. I have inherited some spreadsheets that have both Xcel 4 Macros and vba macros in them. (Well, I get a warning that I cannot switch them off when I disable macros on opening a workbook). I cannot even find the offending version 4 macros so that I can re-code them in VBA.
View 2 Replies
View Related
Feb 7, 2014
the vendor has a 21 hr working window; start from 7am and goes until 4am; Mon to Fri.
Here is a scenario:
- i request for a product information from a vendor on 3-Feb-14 8:00am (Monday)
- he replies with all of the product info on 6-Feb-14 12:00pm (Thursday)
can you find the time in above scenario consideration the working window?
Here is another scenario:
- i request for a product information from a vendor on 6-Feb-14 8:00am (Thursday)
- he replies with all of the product info on 11-Feb-14 12:00pm (Tuesday)
- Sat & Sun are days off but keep in mind that my Friday shift ends on sat at 4am so the networdays formula wont work.
View 2 Replies
View Related
Mar 3, 2009
I am trying to provide a tool for department leaders to monitor productivity for order processing in their departments. The variables I have are: Number of orders(variable), number of pickers (variable), start time(variable). Then, I know each order takes 1 picker 4 minutes to pick on average, and there are 45 minutes worth of breaks during the picking process. So after entering the variables I used =(((C3*4)/60)/D3) to come up with the time needed to process the orders. What I can't get to is how to add this number to the start time, factor in break minutes and get to the projected completion time. I have Excel 2003 at work. Clearly I need to take a class!
View 4 Replies
View Related
