Is it essential to enable macros in whatever the pc i use, if i am interested in using a form which i created in a different pc with macros. is there a way to avoid this. because each and every time i dont want to change the settings in excel in other pc. the form which i create will be filled by my colleagues and they have to send it back to me.
View 2 RepliesI've created a User Form in VBA. When this is filled out, and they hit the enter button, I want the info they entered to automatically be entered into a new worksheet within the document.
Here's the code I currently have:
Private Sub CommandButton1_Click()
Dim iRow As Long
Dim ws As Worksheet
Set ws = Worksheet("Sheet1")
I have an Excel 2003 program that contains macros. One of the macros hides certain command bars and disables the worksheet menu bar. On close the opposite is true. The problem is, if a user uses the disable macros when opening then the worksheet menu bar and other command bars are still available. I would like to hide all of the data sheets and display another sheet that would normally be hidden displaying a message that the macros have to be enabled for the program to work correctly if disable macros is chosen. When the enable macros are used I would like the Error page to be hidden.
View 6 Replies View RelatedI recently reformatted my hard drive. When I re-installed Office 2007, I was unable to run a Workbook that has a Macro in it. First, I went to Add-ins and added the Solveradd-in. When I opened the workbook, I enabled Macros. However, all I get is a maessage saying that the MVB did not compile. I know there are some things you have to do to solve this, but I cannot remember the procedure I went thru 2 years ago to get this to work. Does anyone know what steps I must take?
View 8 Replies View RelatedI have a workbook with that contains macros on a worksheet. When I open the worksheet, I sometimes forget to enable the macros.
Questions
1.Sometimes I get the message about macros being in the file that I'm opening and sometimes I don't - I don't understand why it doesn't pop up all the time and be consistent.
2. If I don't get the pop up screen or if I do but forget to enable the macros, I get reminded when I try to run a macro. For example, I have a check box and try to check it but I get the message that the macro has to be enabled. So I enable it, but the macro doesn't run. I have to uncheck and then recheck the box to get it to run.
i am trying to work out why i always have to enable macro's when i open some of my files that i have macros in, as i save them as enable macro file. I run excel 2007
as there are files i want to open without clicking on the enable button.
I am using the code below to open multiple workbooks in their own instance of Excel.
On my system, as well as most of the ones I've tested it on, enabling macros in the "parent" workbook, i.e. the one that contains the code, leaves them automatically enabled in the new session of Excel, as though the settings are carried over.
However, recently I've found a few systems where this is not the case. Enabling macros in the parent workbook opens the others, and then I have to enable macros again in each of the new sessions. Is there a way to fix this? All of the systems mentioned above have macro settings set to "disable with notification" and this cannot be changed.
if you open a workbook & choose not to enable macros, is there any way to later change your mind & set macros to enabled without having to close & reopen the workbook?
View 9 Replies View RelatedI have a sheet with around 3,000 rows of data. I need to be able to enable/disable different comibinations of three checkboxes based on the value of a cell in column D as follows:
If Band says £0k - £75k then all three check boxes should be disabled
If Band says £75k - £250k then the Step 1 check box should be enabled but the Step 2 and Step 3 check boxes should be disabled
If Band says £250k - £500k then the Step 1 and Step 2 check boxes should be enabled and the Step 3 check box should be disabled
If Band says £500k plus then all three check boxes should be enabled
When a checkbox is disabled I'd like it to appear visible but greyed out so it is obvious the option is not available, maybe via conditional formatting. I don't know if this can be achieved within any code rather than having to manually add conditional formatting afterwards?
I've attached a sample to demonstrate. Is this possible to achieve? I'm open to alternative approaches as well if this makes things easier to do. The mere idea of adding 9,000 plus check boxes if already scary!
I have created a form that pops up using a macro when the form is opened. It is a simple form that uses optionbuttons in a group to select Intl or Dom.
Problems:
1) How do you get the form to close once a button is selected?
2) The user can close the form without selecting a button (the X at the top).
3) How do you get the data selected onto the excel spreadsheet?
I have created a toolbar with buttons that run macros. When the macro is assigned to that button the macro will run fine. However, when the file name of the excel workbook has changed (file relocated or name changed) then the macro (button in the toolbar) does not work and has to re-assigned in the toolbar. Is there anyway of getting around the problem of having to reassign the macro to the toolbar button whenever the file name/directory changes.
View 5 Replies View RelatedI created a button that I have created from a form but I cant seem to delete it or cut it. It just remains there, is there any way out of this?
View 9 Replies View Relatedfind the attached workbook
I have a Database and user form, in the user form i have a field named “Vehicle No” this is a combo box from which a user needs to select the Vehicle numbers, and all these are working fine now, I need your help in the following:
When user selects the second field named "Select Vendor name" i need a pop up window which shows all the Vehicles belongs to the vendor which they have selected, and with the popup window user selects the vehicle number then the Vehicle number combo box should be filled.
Currently users have to select by scrolling through Combo box which takes long time and difficult to find by scrolling.
I created a table in excel, using it's Table feature, the first column has A - J, the second column has 1 - 10,
I then created a VBA form in VBA6,
How do i display that table and its 2 columns in a VBA form?
I have a user form that has a combo box "City" two text boxes one called "Flight" and the other "Date". What I'm trying to do is to prevent the user from saving the data input from the user form if any of those three fields is left blank. The code that I have so far checks all of the required fields, if any are left blank a message notifys which field(s) is left blank and return the focus back to that field. But the rest of code also fires.
What I really need is either to stop the code if any fields are blank and return the focus back to the blank field, the user completes the field(s) and clicks the save again, or better yet, pause the code until all the required fields are completed and then complete the save. (There is actually another 200+ lines of code in this sub, but I deleted it to keep the post a little shorter.)
I have created a registration workbook for this year's youth sports league. All of the information is entered into a User Form and separated onto it's appropriate sheet designated by the child's age. Next year, I would like to use this year's workbook to look up returning players.
Will it be possible to add a "lookup" button into my form, or create a lookup program, that once the registrar clicks on the correct player, the information is plugged into the User Form, the registrar adjusts the age and any necessary info, presses enter, and the information is copied into the appropriate category in the new workbook? I haven't worked with User Forms long enough to know if they can be filled in that way, but if this can be done, you are the people who would know.
I'm using a series of user forms for data entry to a workbook, some of them open next stage user form on completion (OK cmd button).
All that is working fine, but I'd like the initial form to close on showing the next one. I've tried adding Unload and Hide commands following the frmInsertEntry.Show (Next stage form), to no avail, but I'd like this user form to close or hide at the end of the sub.
Private Sub cmdContinueType_Click()
ActiveWorkbook.Sheets("Records").Activate 'Select starting cell in record sheet
Range("N3").Select
Do
If IsEmpty(ActiveCell) = False Then ' Search for next empty cell
ActiveCell.Offset(1, 0).Select
End If
Loop Until IsEmpty(ActiveCell) = True
If optDrillType = True Then
frmDrillEntry.Show
Else
frmInsertEntry.Show
End If
End Sub
I would like to add a piece of code into the user form that will check and verify if a part has already been added so as to avoid multiples in a user-driven/created database.
here is a repost of the current code i am using for the user form (I have posted it before in another thread .. Blane245 helped me out with a different question I had)
I have a spreadsheet with the following headings:
A
Claims Number
B
Name
C
Scheme
D
Admin
E
Date
I need to create a user form that will "pop up" and ask the administrator to enter the above details.
A - should be created automatically (ie last claim number + 1)
B - user enters manually
C - data retrieved from a list
D - data retrieved from a list
E - date is the date the information is entered
I am designing (badly!) an excel file that is intended to be as user friendly as possible. I would like to add in a navigation feature using a list box or other appropriate control form that will take the user to the correct tab in the workbook depending on which item they choose from the list.
My aim is too hide all the tabs at the bottom whilst not crowding my page with multiple command buttons, and still be able to navigate easily through the workbook.
I have a user form that I want to take the information and have it input on the worksheet. I want it to start at A3 and check to see if that cell is "" and if it is not then enter the data from the from horizontally. If A3 is not "" then continue down column A untill the first nonblank cell is and then select that cell and have the data entered horizontally.
I have this code so far but it is not working.
Private Sub cmdSubmit_Click()
Dim Month As Variant
Month = Me.cmbMonth.Value
ActiveWorkbook.Sheets(Month).Activate
I have done a bit of excel programming last year but have not done any for the last 4 months so I am a bit rusty.
I have a couple spreadsheet Excel 2003 that I have to Email, I use a few macros with these spreadsheets. The Macros are kept in my personal workbook. When I Email these sheets does the end user see the warning enable macros or do they just see the sheet as is. I am mailing the whole workbook but macros are in my personal workbook. If they see the warning is it possible for me to Email so they will not have to contend with that?
View 3 Replies View RelatedI am trying to put together a macro that waits for the user to input data and then continue running the macro.
All user input is for one cell and I am looking at more of an entire sheet worth of data.
Here is the scenerio.
I have one tab that pulls data out of a sharepoint list. I then have another tab that I dump data from another database into and then use vlookups to compare the data.
The problem is I need it update the sharepoint list. Then wait for the user to dump in the new data from the external database before continuing the macro and working with the vlookups.
Currently I am working this by running a few different macros to do it all, but I would like to condense it down to running one macro.
I've written a workbook that enables my workmates to enter sample information easily (workbook attached). What i need help on i cant get the combobox 's on the user form to pick up the related info in worksheet named "data" and insert it into the relavant coloumn in tab named "Results". I can get it to work without using combobox's and just typing the info into a textbox but i wanted to use combobox's.
Another thing i wanted to do was pick invidual results and send them the "Report" for printing. how would i do that.
I have a project, i want to create a user form, basically i have a work book that contains dinner menu's on column A and ingredients in column b.
I would like to create a user form that have a drop down box that would show all the possible menu's referencing my workbook sheet1 column A values. and by selecting a item, i would like to be able to show all ingredients needed, is there a way to do this?.
I hope so, it would be so cool to do this.
I have created a multi utility user form that user can initialize by a shortcut key. The problem if user want to see the content on sheet or want to change the active cell, he has to close the form and then do any action. This form is initialized by a command and default included in excel as a Add-in. Is there is any way to make the form floating i.e. user can manipulate the data and can see the form as well.
View 4 Replies View RelatedOn a userform, I have 5 paragraphs of text that the user needs to read. The problem is the user can't see all 5 paragraphs, the user is only able to see about two paragraphs. I don't want to make the userform larger but I would like to add some type of scroll bar that would allow the user to scroll up and down to view all of the text.
View 7 Replies View RelatedCan anybody help me with a code that shows a comment within the user form when specific a checkbox is selected?
I am attaching a sample file with user form containing 6 checkboxes. I need when Name6 is selected, a comment "Test" to appear inside the user form beside the checkbox.
I have created a user form (thanks Datsmart), and now need to place the data that will be inserted in that userfom onto my spreadsheet.
The spreadsheet will have 50 rows, each containing a different project. There will be a button on each row to activate the user form for that specific row. They click the button on the spreadsheet, and the user form opens. They enter the data on the user form, and once they click the "add comment" button on the user form, the data should be entered in the last cell of the row on which the button is located.
Now the complicated part:
The users will use that for to update the project from week to week, but each week's comment needs to go in the same cell, but above the previous comment.
IE:
Week 1
Jan 1: Project lauched
Week 2
Jan 6: Project budget submitted
Jan 1: Project lauched
Week 3
Jan 22: Budget approved
Jan 6: Project budget submitted
Jan 1: Project lauched
The date being the date from the user form, and the comment being the comment from the user form. If the latest date can be bolded that would be a bonus.
They each have to go in the same cell cause all relate to the same project. This same thing will be repeated 50 times for each different project.
I came here yesterday asking for help and was helped immediatly, but I have another question/problem. I got my user form up and running, however I've just been informed that the form has to be able to be printed out. So basically I need this user form with all the data on it and I need it to be printed.
Is there a way to add a command button perhaps that prints out the form with the data on it? (Ex: Imput Data, hit Print command button, have an electronic and hard copy of the information)