I created a spreadsheet with several combo boxes that that is linked to other data.
When this data is sorted, the values in the combo boxes are automatically changed.
Is there any way to prevent the the values to change?
I have 3 worksheets, one worksheet is a summary worksheet that gives totals for what the user chooses... like Actual vs Budget or Actual vs Prior... etc. When we are in our meetings a common question is where did these numbers come from?
I would like to create a macro button that when you are on a cell you can click the button and the macro well take you to the destination cell. Is there a way you can write a formula in to the macro that would use the formula in the current cell and take you to where that number comes from?
I have created a powerpoint that has linked charts from excel. Stupidly, I have saved both of these files (powerpoint and excel) on my desktop.
I need to save them on another drive (so they can be accessed by others) but i am worried that if i move the original excel file, it will break the links for the charts in the powerpoint file....
I have over 150 charts so I don't fancy going through and re-pasting each chart.
I've inserted a Solidworks drawing into a worksheet & wish to change the displayed image using VB. I suspect this could be done by changing it's source file, but can't get the code to work.
View 3 Replies View RelatedI want to establish a link from my worksheets. Using the conventional link method I was able to link the values from my first worksheet to the second worksheet. My problem is when I delete a particular row. The reference of the second worksheet will have an error #REF! since I deleted those cells. Is there any way that I can link my two worksheets without any error that even if I deleted a particular cell/row the reference is still intact?
View 2 Replies View RelatedI have a userform with a textbox and would like the user to type inside the textbox which in turn send the text typed to a cell on my spread sheet say sheet 1 cell ref A1. I am writing the following into the control source Sheet1!A1 but the control source does not except this. I am using excel 2007 .
View 2 Replies View RelatedHow can I link the names of severall employees in a combo box (or data validation cell), with specific and individual arrays?!?!
View 3 Replies View RelatedI have to fill out two cells (lets say A10 and A11), with the same data taken from a list of given data. The given data is placed in one column.
I have created Combo Box where the ListFillRange is the given data area and in the LinkedCell I tried to write two cells but Excel doesn’t accept list of two cells.
For example, I tried to write in the LinkedCell A10,A11 and A10:A11 and A10;A11 but none of this syntax worked.
I can’t write A10 only in the LinkedCell and then to write a function A11=A10 in cell A11, because in some cases the content of cell A11 will be changed by another Combo Box linked to cell A11 and that Combo Box will override any function that will be written in A11.
I have been working on creating a form in Excel. I have already figured out how to have combo boxes that are dependent on one another. Now I have a question on that. Let's say that my user makes a selection from the first combo box. Clinical Services for example. The second combo box should now show only the values that pertain to Clinical Services (which it does, that part is working fine). So let's say they choose Retail under Clinical Services. However, now let's say that the user changes their mind and they go back and change their selection in the first combo box to Mail instead of clinical programs. The second combo box stays on the selection that they had previously picked (Retail) even though that value does not pertain to their new selection (Mail). How do I refresh this to delete their old selection in the second combo box (Retail)? If they change their mind of the first combo box and select something else the second combo box does display the correct drop down information, it just doesn't clear out the old selection.
View 4 Replies View RelatedI am working pivot tables off of one large excel spreadsheet for my data. I have multiple pivot tables on each of 5 worksheets. The problem is this. Every other week I am sent an updated spreadsheet with the same column names each week which I then copy and paste it into the spreadsheet of the last one. When I refresh the pivot tables, I end up with duplicate field sets. For example, on column in the original data sheet is gender. On the first sheet I went through and renamed the "M"'s and "F"s to be "Male" and "Female" so that it is better looking when printed. Now when i get the new information and copy and paste it to rplace the old, and refresh the pivot tables, I end up with "Male" "Female" AND "M" "F". Now the "Male" and "Female" fields are empty and the "M" and "F" fields have the information. Is this a result of me renaming the fields?
View 5 Replies View RelatedI have a list of entries on one sheet. This sheet contains part numbers in random order. I would like to draw out the part numbers onto a new sheet, with no repeats and in numerical order. I want this to be done automatically without using a sort command. Also, I would like to avoid VBA if possible.
View 8 Replies View RelatedI have combobox filled with range of two columns , i want somehow to show them both in linked cell , I don't figure it out , by myself using BoundColumn option and it showing first or second column only.
View 4 Replies View RelatedI have a worksheet, and I want to place a combobox in a cell, but being able to add values not on the corresponding list. Done almost everything, but cannot find a way to use the position of the cell, so I can dinamicly place a combobox. Ex.- place a combo in a cell, then after you get the value, delete the combo and put it in the cell bellow, etc. In order to do this I need the position of the cell: left, right, height, width.
View 2 Replies View RelatedNot sure if this can be done, still a rookie at this stuff. Everything works but can something be wrote into code too change list source?
View 5 Replies View RelatedI have one userform with combobox1 and combobox2.
Combobox1 have 5 names to choose from ( Alice, Matt, Carlos, Jennie and Lisa)
Also i have one sheet for each name with personal info on each row.
And every time I choose one name from combobox1, I wanted combobox2 to get that info from the related sheet.
I have a golf teetime reservation spreadsheet. For each tee time there can be up to four players names so I use 4 columns. Times are listed in rows every 10 minutes beginning 6am until 5pm for a total of 66 rows per day. I have a member/customer list that I have on a separate sheet that I've named. I am using the ActiveX combo box next to each possible entry (so 4 columns times 66 rows = 264 combo boxes). It's a little slow and takes a long time to open. I like the ActiveX combo box because it allows me to define the box format and display and it allows search/read/write capability. The idea is the customer calls, I ask what time they want and we arrive upon an available time. I ask for a last name, I click the combo box, type the first letter of the first name and then scroll if necessary to the name and click it to add the name to the time/player cell. If no name in my list we simply type it in and I'll capture it next time I refresh my customer list.
way to dynamically define the linkedcell in the properties so that instead of 264 combo boxes, I might have one combo box that I can click on and then direct my selection to the cell I want it to go into.
I have an Excel sheet with a list of data, which is likely to change frequently and has to remain in sorted order.
Requiring that users of the spreadsheet maintain the data in this way (i.e. sort it every time it changes) is a really bad solution and I'd rather not use a macro if I can avoid it (too much stuff can go wrong).
Is there a good way of doing this? At the moment, I've implemented merge-sort within a sheet, which works, but is a heavyweight solution, taking 6 columns per merge-sort iteration (so 60 columns to sort 1024 rows, 96 columns to sort 65536 rows). I could try to compact it, but my head was starting to implode programming it even with as few as 6 columns.
There must be a better way of getting Excel to maintain an automatically sorted list.
I want to copy the first 30 rows of a autofilter list can someone point me in the right direction?
View 13 Replies View RelatedDependent Dropdowns from a Sorted List:
i have one file here..
how did they created validation here.
is there any macros?
i tried..but i didnt able creat like this.
i got this file in this link.
http://www.contextures.com/xlDataVal13.html
i saw this problem in this post..
http://www.excelforum.com/excel-prog...hierarchy.html
Below is my code. I need the row source for my combobox to be dynamic. I created a named formula and referenced the formula in my code. It doesn't work.
This is the formula "listname"
=OFFSET(MyList!$C$2,0,0,COUNTA(MyList!$C:$C)-1,1)
Private Sub ComboBox1_Change()
ComboBox1.RowSource = Range("ListName")
End Sub
I am currently using a pivot to return and populate the required data but this does not refresh correctly and returns zero values every time this report is refreshed. I am therefore hoping that there is a way to calculate this using formulas .
The following applies:
The attached document has 2 tabs: Date AND Report
The Data tab feeds the report tab
The REPORT tab has 2 reports in it but doing the first one then I should be able to do the second one. If you look at the first table you will see the data that needs to be populated. I have added a highlighted (in YELLOW) row at the bottom of this table which shows you which columns populate what column
Requirement:
I am after something that will populate this table in a descending order - IE: the figures in the DATA tab Column BE should be sorted from highest to lowest. It must be filtered to the top 30 results only and then all the other columns must be populated.
Column H in the REPORT tab should be formatted to [h]:mm
Column F & G in the REPORT tab should be formatted to dd/mm/yyyy hh:mm
How do i stop my combobox from displaying duplicate entries?
See Sort & Remove Duplicates From ListBox
why is pivot table changing numbers to dates. It was fine all along, numbers retained the fromat of source data and now, all numbers in field columns are turning into dates. is there a setting I can change to prevent excel from reformatting numbers to dates?
View 1 Replies View RelatedI have a combobox in which I need data loaded from a column of an excel sheet.
As of now, I am using the below
Last = Sheet9.Cells(Rows.Count, 1).End(xlUp).Row
With ComboBox1
For Row = 2 To Last
.AddItem Sheet9.Cells(Row, 1)
Next Row
End With
Is there any other way to load data?
I have a long list of names in Column A sorted alphabetcially. I dont know how long the list is.
I wish to find the start and end row numbers of names that begin with a specific letter, for example if the letter is B I want the first row number that starts with B and the row number that ends with B. Assuming the letter I want to use is in C1, here is what I came up with:
I have an 'in-cell dropdown' which looks up two values, Q1 and Q2 I have a range of data by month showing a specific number as below e.g
Month
Count
2012-01
120
2012-02
190
2012-03
200
2012-04
150
2013-05
175
I have a Line graph using this entire table as the source data. What I would like to do is only use part of the data based on what the dropdown cell specifies. For example, if it is set to "Q1", I would like just the 2012-01 and 2012-02 data to show in the graph. If its "Q2", I would like only 2013-03 and 2012-04 data to show in the graph.
I'm trying to create a userform with a combobox wherein items that will be provided in it will be based on the worksheet named NA. When i try to change the Rowsource on the properties of the combobox i'm getting an error "could not set the rowsource property. Invalid property value". Do I need to declare the name of the worksheet before changing the rowsource?
View 6 Replies View RelatedUsing the developer tab I inserted an Active X combo box. Under properties I referenced a 'linked cell' that I want the data to appear in. This box works great as long as I keep the sheet open. Once I save and close the workbook and re-open, that reference is lost. It shows #REF! in that field. Why does it lose the reference? I have tried to reference a cell on the same sheet as well as a cell in a different sheet and it keeps the sheet name but not the individual cell.
View 13 Replies View RelatedExcel – Forms – Combo Box, cell updating.
I have a form (the main one) which accesses a second form, which accesses a third form. All forms have a combo box, control button and a text box.
The items selected in the control boxes are entered into cells (the base cells) in the spreadsheet, via “Control Source”. The text boxes access these cells and show the selected items, which are then copied to other cells via a macro on activating the control button in the main form.
The main form stays open while other items are selected and transferred. Some of the items may not be changed (reselected) as they may be common. The problem is that after a number of items have been selected and transferred, the base cells for the second and third text boxes do not update after a selection from the combo boxes, and they continue to show a previously selected item.
The problem can be solved by closing the 2nd and 3rd forms and starting again. What can I do keep the cells updating without closing the form down?
I have a userform with a combobox in it that's rowsource is a column of company names in a worksheet. When a company name is chosen, a combobox change private sub runs and many userform textboxes are populated with information about the company that was chosen from the combobox dropdown. This information is stored on a worksheet. I then want to edit any of the information in these textboxes. Once my edits are made I have a CommandButton that is pressed to save the edit changes. This CommandButton runs a private sub that disables the combobox (thinking this would prevent the combobox private sub from running), deletes the row that the information originated from, and then SHOULD make a new row of values based on the contents of the textboxes following the edits. The problem is that the CommandButton coding that deletes the row causes the combobox change private sub to run because the company that had been selected is now the missing from the rowsource; this causes an error.
View 8 Replies View Related