Formula For Calculating Sorted List Of Values
Jun 10, 2014
I am currently using a pivot to return and populate the required data but this does not refresh correctly and returns zero values every time this report is refreshed. I am therefore hoping that there is a way to calculate this using formulas .
The following applies:
The attached document has 2 tabs: Date AND Report
The Data tab feeds the report tab
The REPORT tab has 2 reports in it but doing the first one then I should be able to do the second one. If you look at the first table you will see the data that needs to be populated. I have added a highlighted (in YELLOW) row at the bottom of this table which shows you which columns populate what column
Requirement:
I am after something that will populate this table in a descending order - IE: the figures in the DATA tab Column BE should be sorted from highest to lowest. It must be filtered to the top 30 results only and then all the other columns must be populated.
Column H in the REPORT tab should be formatted to [h]:mm
Column F & G in the REPORT tab should be formatted to dd/mm/yyyy hh:mm
View 2 Replies
ADVERTISEMENT
Dec 23, 2008
The idea is to have our technicians complete a timesheet showing how their time is being allocated between various tasks. I have created the spreadsheet and each row has a drop-down list with 6 options (Project Management, Audit, Office, etc) then a start and finish time which is calculated. I want to automate it so each each task option (Project Management, Audit, etc.) is calculated. There will be multiple entries for each task option over a weekly period. I tried VLOOKUP, but it does not work well with the text entries. I have attached a copy of the spreadsheet to better illustrate what I am trying to explain.
View 4 Replies
View Related
Sep 19, 2006
I have a list of entries on one sheet. This sheet contains part numbers in random order. I would like to draw out the part numbers onto a new sheet, with no repeats and in numerical order. I want this to be done automatically without using a sort command. Also, I would like to avoid VBA if possible.
View 8 Replies
View Related
Jan 27, 2009
I have an Excel sheet with a list of data, which is likely to change frequently and has to remain in sorted order.
Requiring that users of the spreadsheet maintain the data in this way (i.e. sort it every time it changes) is a really bad solution and I'd rather not use a macro if I can avoid it (too much stuff can go wrong).
Is there a good way of doing this? At the moment, I've implemented merge-sort within a sheet, which works, but is a heavyweight solution, taking 6 columns per merge-sort iteration (so 60 columns to sort 1024 rows, 96 columns to sort 65536 rows). I could try to compact it, but my head was starting to implode programming it even with as few as 6 columns.
There must be a better way of getting Excel to maintain an automatically sorted list.
View 11 Replies
View Related
Jan 4, 2008
I want to copy the first 30 rows of a autofilter list can someone point me in the right direction?
View 13 Replies
View Related
May 1, 2009
Dependent Dropdowns from a Sorted List:
i have one file here..
how did they created validation here.
is there any macros?
i tried..but i didnt able creat like this.
i got this file in this link.
http://www.contextures.com/xlDataVal13.html
i saw this problem in this post..
http://www.excelforum.com/excel-prog...hierarchy.html
View 6 Replies
View Related
Jul 3, 2009
Still i could manage with Sorting of data. Now i have following data
Name Project Artha Artha Prj Artha Artha Prj PBB ACR Seema Brew Seema SEMC Seema handset dev & testing Seema SEMC Seema handset dev & testing Shashi PRJ1 Shashi PRJ1 Surajit FLV Surajit FLV Surajit FLV
And i want to have following result using a macro
Name Project Count Artha Artha Prj 2 PBB ACR 1 Seema Brew 1 Seema handset dev & testing 2 Seema SEMC 2 Shashi PRJ1 2 Surajit FLV 3
View 9 Replies
View Related
Jun 14, 2007
I have a long list of names in Column A sorted alphabetcially. I dont know how long the list is.
I wish to find the start and end row numbers of names that begin with a specific letter, for example if the letter is B I want the first row number that starts with B and the row number that ends with B. Assuming the letter I want to use is in C1, here is what I came up with:
View 12 Replies
View Related
Jul 19, 2006
I created a spreadsheet with several combo boxes that that is linked to other data.
When this data is sorted, the values in the combo boxes are automatically changed.
Is there any way to prevent the the values to change?
View 5 Replies
View Related
Jun 17, 2014
My excel sheet contains a set of date-marked expenditures. It's all one running list - no starting a new column for each month or anything like that.
I'd like to include a separate column/sheet showing total expenditure for each month. I've tried multiple formulae, along the lines of "Sum the B cells but only those for which the corresponding A cell is in the right value range". Or in programming terms, "for i from 1 to infinity, if x < A(i) < y, add B(i) to sum." Since other formulae on the sheet are independent of item ordering (don't require the data to be sorted chronologically), a plus would be if the solution can be, as well.
A separate thing I'd like to do (which I'm guessing has a similar solution) is to include grand (running) totals by expenditure type. A separate column of (non-numerical) expenditure codes is next to the data.
View 5 Replies
View Related
May 24, 2013
I am using the formula below to find the # of hours that staff worked.
=SUMPRODUCT(('Data 1'!$B$2:$B$601=B7)*(LEFT('Data 1'!$A$2:$A$601,2)=LEFT(C7,2))*'Data 1'!$D$2:$D$601)
B7 = Last Name
Left(C7,2) = First 2 Letters of the First Name
$D$2:$D$601 = Hours Worked
My only problem is that some staff show up in the list on "Data 1" twice as they work in 2 separate stores and I am only getting the hours worked at the first store. Is there a way to have excel add the hours for both stores? My data is sorted alphabetically so they will be one above the other.
View 4 Replies
View Related
Jul 20, 2014
I use this formula, but it only works if I provide the first name on the list, otherwise I get 0 in all rows, instead of the unique values in alphabetical order.
Code:
={IFERROR(INDEX($A$2:$A$200;MATCH(TRUE;COUNTIF($A$2:$A$200;"
View 8 Replies
View Related
Aug 14, 2014
1. Using a formula, I am trying to to obtain a list of unique values (string) (caveat: see #2) from the range E2:E10000 (arbitrarily chose 10000 - the row number is variable)(see #3).
I currently have a formula that seems to work for this purpose but I don't know how to add the condition in #2 (below)
2. To include all unique string values except those starting with the letters "IC"
3. Is there a way to make this formula so that it can only seek values up to the last row, and not go to the 10000th row if not necessary? The E column has no empty cells until after the last row that contains data.
Here is the formula I currently use which serves #1 (above):
[Code] .....
Any way to improve/simplfy this formula for the purpose describbed in #1? How can I add the condition in #2? Can you see a way to include #3? The most important issue here is #2.
Example of desired results:
Column A | Column B
AA | AA
DD | CC
AA | DD
CC |
DD |
DD |
IC |
IC |
View 14 Replies
View Related
Apr 9, 2014
I have two data columns: the first is a list of the last 100 calendar dates, and the second is an ON/OFF (or 1/0 if you prefer) value corresponding to each date. If the last value in the second column list is ON, I want to find how many continuous days the value has been ON for. If the last value in the second column is OFF, I want it to return a zero. Note that in the 100 day span of data, the value may switch between ON and OFF several times, but I only want the continuous, uninterrupted ON days at the end of the date range.
View 8 Replies
View Related
Mar 28, 2014
Is it possible to have a formula that generate a Unique list (List 1 and List 2) of Missing values in List 2 by comparing two lists? Something like this
List 1 List 2 Missing in List 2
1 1 3
3 4 6
5 5
6 6
View 3 Replies
View Related
Mar 4, 2012
I have an Incomes & Expenditures spreadsheets. When I add an expenditure to the sheet I can choose which category of expense it is from a drop down list of expenses. At the lower part of the sheet away from main section I have a list of the categories which I would like to have monthly totals alongside. with the formula?
View 7 Replies
View Related
Sep 20, 2008
I'm using the following formula to find the 1st date that a particular rep wrote an order.
{=IF(S4="","",IF(MINA(IF('Daily Compliance'!$A$2:$A$5028=B4,'Daily Compliance'!$O$2:$O$5028))=0,"",MINA(IF('Daily Compliance'!$A$2:$A$5028=B4,'Daily Compliance'!$O$2:$O$5028))))}
I also need to figure out when they write their 10th order, but have had no success figuring that out.
View 6 Replies
View Related
Aug 1, 2014
I am looking for a formula that counts from each particular month
The main List has the following
Column C has all dates
Column D has hours worked
Column E has engineers name
The Second List is broke down into months and hours
Column I Has month ie I4=Jan 14, I5 = Feb 14 etc
Column J I need to have a total taken from column D from the month in column I
View 8 Replies
View Related
Jun 8, 2009
I got three columns. The left one is the day number. The middle column is for indicator variables 1 or 0. This is suppose to be chosen by the solver function. I want the third column to show the DIFFERENCE between the "chosen" days. This can be better explained through an example:.......
(extra information: the indicator values are chosen by solver based on several criteria not stated here, but this particular part of the sheet is suppose to refrain the chosen days to have differences between them larger or smaller than a given value.
View 2 Replies
View Related
Aug 30, 2007
One of the spreadsheets we have here keeps track of reservations booked in the following way.
FG
101/05/200801/08/2008
201/06/200801/09/2008
301/06/200801/07/2008
401/06/200801/06/2008
The date in F is the check in date and the date in Column G is the check out date.
There is another spreadsheet in the same workbook that counts the dates that these people are checked in.
For example:
AB
1
2JanuaryRooms Occupied
310
420
530
640
751
863
972
1081
119
1210
1311
1412
As you can see column B7 has one room because of the fact that the reservation check in of F1 started on the Fifth of January
B8 is Three because reservations 1-3 are checked in on the sixth of January
B9 is 2 because reservations 1-2 are checked in on the seventh of January
B10 is 1 because reservation 2 is checked in on the eighth of January
Please note that F4:G4 does not count on this worksheet due to the fact that they checked out on the same day as check in.
I would love any help you could give on this confusing subject.
View 9 Replies
View Related
Mar 6, 2009
I have a bunch of start End times in columns calculating total time :-
View 12 Replies
View Related
Jan 9, 2010
I have a large spreadsheet with about 250 worksheets, each of which contains among other things a row of values that require further calculation (the values are being entered manually). The format of these rows is simple:
CodeH343B734G232L383N343M386
Count 1 3 2 4 3 2
Given that these rows are identical in size and they are in exactly the same cell positions in each of the 250 sheets, I need to find a way of getting each of the values entered in each of the 250 sheets automatically copied across to a different sheet and added to an existing total. In my limited understanding of Excel I consider such operation to be similar to a sum function which involves multiple cells in multiple sheets. Despite my best efforts I’ve yet to find a solution to what may be a very simple problem.
View 2 Replies
View Related
Jun 11, 2007
I have a spread sheet which is organised in date order column A and produces three signals Buy, Sell, No trade in column S. If i get a signal to buy or sell the price is taken in column T so i might have Buy - 1.9977. I wish to calculate the diff between the value taken to buy in this eg and deduct this value from the opp signal at some point ie a sell signal. Other buy signals and notrade signals should be ignored. The opposite is true for a sell signal
Eg
A,s,t,u
13/4/07, buy,19955,35
12/4/07,no signal
11/4/07,no signal
10/4/07,no signal
9/4/07, no signal
8/4/07, no signal
7/4/07, sell, 19990,13
6/4/07,no signal
5/4/07,no signal
4/4/07,buy,19977
if a buy signal is generated then in this eg 19990-19977 gives the diff if selling then 19990-19955 gives the diff .
View 14 Replies
View Related
Jul 28, 2006
I created a pivot table in which sales amounts are represented and a derived table in which market share percentages are showed. Now i am looking for a formula that is able to calculate average market share values. Depending on which country i selected in the pivot table and which category, the number of active companies are changed. How can i formulate this formula to calculate average market share percentages in a certain period. check out my attached file to clarify the situation.
View 2 Replies
View Related
Jun 9, 2014
I need to make a table for an injury category per shift per week. (Falls per shift per week)
I have attached an example of the spreadsheet. I have a formula in the table now that was calculating just the injury type per week but just need to add the function to read per shift but can't seem to get it to read correctly.
View 2 Replies
View Related
Jan 23, 2014
I'm trying to calculate total occurrences of a given month. I have included the spreadsheet for reference with totals.
I only want to calculate when the Policy column has a "N". If it has a "Y" I do not need to do anything
If the Policy has a "N" I want the formula to look at the V and P columns and give me a total in the Total Occurrence column. I want it to look at the entire month for a grand total.
If the V or P column has a 4 or less it should equal 0.5, if it has a value is between 4 and 10 it would equal 1. So in the Total Occurrence column should calculate the all of the 0.5 and 1's based on each set of columns and give a total. In the example that I have given in the spreadsheet the total in the Total Occurrence column would be 2 because Jan. 1 has a N and a 8 which equals 1 and Jan. 3 has a N and a 4 which equals 0.5 and Jan. 5 has a N and a 4 which equals 0.5 for a total of 2 occurrences.
View 10 Replies
View Related
Sep 14, 2009
I have a set of values. #N/A413636363632. The #n/a is there on purpose for charting reasons. How do I calculate the stdev of that range? i.e. ignoring the error?
View 2 Replies
View Related
Apr 19, 2006
I have employees that have different number of business days they work. I
need to be able to calculate when the employee has utilized a specific number
of business days specific to the days of the week they work and the number of
days per week work. For example, if I have an employee that works 3 business
days per week (Specifically M, W, and F), and I need to know the date this
employee worked a total of 30 business days, is there a way to calcuate this
date (which should be 6/9/06 if we use a start date of 4/3/06.
View 9 Replies
View Related
Dec 27, 2013
I have a spreadsheet with the second tab hyperlinked to the first tab.
Tab 1
Bus
DEC '13
NOV '13
OCT '13
SEPT '13
AUG '13
[Code] ......
ERROR: Row 157, Aug '13
Here's the formula I used: =IF('End of Month'!L3>=0,('End of Month'!L3-'End of Month'!N3),IF('End of Month'!L3>0,('End of Month'!L3-'End of Month'!M3),(0)))
Should return value 339.
The formula should simply take the current month value and subtract it from the previous month value BUT if the value is zero, then it should go to the prior month and so on until it retrieves a positive value.
I've also tried to following formula without any success:
=IF('End of Month'!H3=0,('End of Month'!H3-'End of Month'!J3),
IF('End of Month'!H3=0,('End of Month'!H3-'End of Month'!K3),
IF('End of Month'!H3=0,('End of Month'!H3-'End of Month'!L3),
IF('End of Month'!H3=0,('End of Month'!H3-'End of Month'!M3),
IF('End of Month'!H3=0,('End of Month'!N3-'End of Month'!O3),
IF('End of Month'!H3>0,('End of Month'!H3-'End of Month'!I3),(0)))))))
View 7 Replies
View Related
Feb 3, 2014
This pivot table is used to track referrals for an employment service, and needs to show monthly totals of referrals, enrolments, cancellations and placements.
I have the referral date as one of the row lables, but it seems that each of the others now only reflectes back to that date rather than the date entered in that value
EG:
5 clients referred in September, One was placed in October, 2 in December and 1 in Jan but the totals for placed are all showing in September rather than the month the clinet was placed.
View 4 Replies
View Related