Below is my code. I need the row source for my combobox to be dynamic. I created a named formula and referenced the formula in my code. It doesn't work.
This is the formula "listname"
=OFFSET(MyList!$C$2,0,0,COUNTA(MyList!$C:$C)-1,1)
Private Sub ComboBox1_Change()
ComboBox1.RowSource = Range("ListName")
End Sub
I have a combobox in which I need data loaded from a column of an excel sheet.
As of now, I am using the below
Last = Sheet9.Cells(Rows.Count, 1).End(xlUp).Row
With ComboBox1
For Row = 2 To Last
.AddItem Sheet9.Cells(Row, 1)
Next Row
End With
Is there any other way to load data?
I have an 'in-cell dropdown' which looks up two values, Q1 and Q2 I have a range of data by month showing a specific number as below e.g
Month
Count
2012-01
120
2012-02
190
2012-03
200
2012-04
150
2013-05
175
I have a Line graph using this entire table as the source data. What I would like to do is only use part of the data based on what the dropdown cell specifies. For example, if it is set to "Q1", I would like just the 2012-01 and 2012-02 data to show in the graph. If its "Q2", I would like only 2013-03 and 2012-04 data to show in the graph.
I'm trying to create a userform with a combobox wherein items that will be provided in it will be based on the worksheet named NA. When i try to change the Rowsource on the properties of the combobox i'm getting an error "could not set the rowsource property. Invalid property value". Do I need to declare the name of the worksheet before changing the rowsource?
View 6 Replies View RelatedI created a spreadsheet with several combo boxes that that is linked to other data.
When this data is sorted, the values in the combo boxes are automatically changed.
Is there any way to prevent the the values to change?
Excel – Forms – Combo Box, cell updating.
I have a form (the main one) which accesses a second form, which accesses a third form. All forms have a combo box, control button and a text box.
The items selected in the control boxes are entered into cells (the base cells) in the spreadsheet, via “Control Source”. The text boxes access these cells and show the selected items, which are then copied to other cells via a macro on activating the control button in the main form.
The main form stays open while other items are selected and transferred. Some of the items may not be changed (reselected) as they may be common. The problem is that after a number of items have been selected and transferred, the base cells for the second and third text boxes do not update after a selection from the combo boxes, and they continue to show a previously selected item.
The problem can be solved by closing the 2nd and 3rd forms and starting again. What can I do keep the cells updating without closing the form down?
Not sure if this can be done, still a rookie at this stuff. Everything works but can something be wrote into code too change list source?
View 5 Replies View RelatedI have a report that was created for 2005 that contains two worksheets: a "source data" worksheet and a " pivot table" worksheet. I cleared out the 2005 data in the "source data" worksheet and replaced it with 2006 data...after this I refreshed the Pivot Table and everything seemed fine. When looking at the file size I noticed that it was almost twice its original size....upon further investigation I found that the Pivot Table was internally holding onto the old source data (the "Show" functionality of the rows/columns in the table lists the 2005 row/column headers as well as the 2006 headers....even though no data from 2005 is shown in the Pivot Table).
Does anyone know how to purge the old data from the internal Pivot Table memory?
I hope this is enough information....let me know if you need more.
Thanks in advance for any help,
Jon
Am trying to get dynamic population of 2nd combobox based on match from criteria in combobox 1.
if column a = bears and column b = colours of bears then
when I select bears in combobox one, combobox 2 would populate with colors of bear.
I am think of having a combobox 1 change event that evaluates each row in a specific range (does it match the criteria?) if so, then add 2nd cell (column b) of that row to the combobox 2.
I know it would probably involve match and offset, add item and loop, but I am not sure what the syntax is.
I need to populate two combo boxes from excel sheet, the data will be like below:
Column A Column B
A 1
A 2
A 3
A 4
A 5
B 100
B 101
B 102
So from the above data, one combo box should hold unique values A & B.
On selecting a value from the 1st combo box A or B, respective values should be populated in 2nd combo box.
So the data should be like below:
If A is selected in the 1st combo box, then 2nd combo box should only show the values 1,2,3,4 & 5.
If B is selected in the 1st combo box, then 2nd combo box should only show the values 100,101 & 102.
Friends I need it in a macro and one important point is, this is dynamic and it is not static and the data can be more.
When I make a comboBox selection from the dropdown menu, the menu stays down until the last statement of the comboBox code is finished. How do I make the dropdown disappear immediately after the selection is made?
View 9 Replies View Relatedtry and achive is when a user selects a item from the 1st Combobox the 2nd Combobox is the populated with the cell that is to the right of the selected item.
for Example if a user selects AAB from combobox1,, Combobox2 should populate with Belly.
Maby using combobox1_Exit for the excercise.
I created a UserForm then linked ComboBox1 to range A2:A, TextBox2 to range E2:E, and ComboBox3 to range M2:M of the same worksheet, named Sheet3. The row contents in Column A, Column E, and Column M are associated. Therefore, when the UserForm is active I want to be able to select a row from Column A in ComboBox1 and have the UserForm pull the contents from the same row of Column E into TextBox2, and Column M into ComboBox3. Here is what I have so far, but its not quite doing it.
Code:
Private Sub UserForm_Initialize()
Sheets("Sheet3").Activate
Dim ColARange As Range
[Code].....
I have a table, headers "FirstName" and "SurName".
Further a Userform with 2 Comboboxes "FirstName" and "SurName"
I'd like to choose the FirstName (say Jack) in the "FirstName" combobox, and based on that get the choice of the Surnames of all my Jacks in the "SurName" combobox.
Actually my sheet has much more fields and comboboxes, but i think my problem is just that I do not find a way to populate them dynamically.
How can i Loop through a combobox's values and compare to a string value and then set the listindex of the combobox to that value?
View 5 Replies View RelatedI have created a userform in which there are numerous Text and Combo boxes. In ComboBox 1 I have, in effect, a list of named ranges in a spreadsheet.
I want the RowSource for ComboBox 2 to equal the item selected (named range) in ComboBox 1.
VB:
Private Sub UserFormcriteria_Click()
Set ComboBox2.RowSource = ComboBox1.Value
End Sub
I want to fill two Combobox (cmb 2 and 3) dependent on what the user has chosen in a first ComboBox (cmb1).
The first combobox ist based on on the first sheet, and the second and third combobox shall be filled with values from other worksheet corresponding on combobox 1 selection.
I attached a xls to this post to explain better.
I have a userform with a combobox that has three items to choose from: Blue, Red, and Yellow. When a user selects one of those options, I would like another combobox to appear on my userform with a specific list for that option.
View 2 Replies View RelatedI'm trying to make a userform that has 2 combo boxes. I have just 3 columns right now.
Procedure GrpADA-QSI DescProcedure GrpAnesthesia And
Drugs9210-LOCAL ANESTH/NO SURGAnesthesia And DrugsAnesthesia And
Drugs9212-TRIGEM BLOCK ANESTHCrowns And BridgeAnesthesia And
Drugs9215-LOCAL ANESTHESIADenturesAnesthesia And
[Code] ........
I copied and pasted Column A into Column C and then removed duplicates. I named Column C 'ValList' and placed it in the RowSource for ComboBox1. What I now want is for ComboBox2 to populate based on my selection in ComboBox1. There are no duplicates in Column B. Duplicates are in Column A.
I also named Column A 'Proc_Grp' and Column B 'ADA_QSI_Desc'
For the properties in Combobox2, I left the RowSource empty. (that's correct right?) Because there's going to be a code that links Combobox2 to Combobox1... I think...
is it possible to perform calculation such as sum,multiply value of 2 combobox and get it shown at 3rd combobox/label at userform initialize stage?
I have a userform where I have 2 comboboxes. The first combobox shows the the first column (only 1 of each) and the second comboBox shows me the secondary list that correlates to the valuse in the first from column B. Now I have a text box that I am trying to get the value from column C depending on what I have in the first 2 comboboxes. What is the easiest way to do it? This is all in VB since it is a UserForm, and using Vlookup seems to be too many lines if I go that route. Is there a way to use Index and Match in VB where it would be more efficient? I attached just a sample of how the data would be layed out in the Excel sheet.
View 4 Replies View RelatedI have two questions.
1). I have dates listed in excel (01/01/2006 to 12/31/2006) say from range B12:B376.
How do I get these values to a ComboBox.
2). If the above is possible and if I select a value in ComboBox say 08/07/2006, it should get updated in a particular cell say A1
So selection of 08/07/2006 in ComboBox, should reflect 08/07/2006 in cell A1.
Note: This ComboBox is on the UserForm and not on the Excel Sheet.
I have one userform with combobox1 and combobox2.
Combobox1 have 5 names to choose from ( Alice, Matt, Carlos, Jennie and Lisa)
Also i have one sheet for each name with personal info on each row.
And every time I choose one name from combobox1, I wanted combobox2 to get that info from the related sheet.
I am trying to populate a combobox (CboMilestones) based on the project number that appears in CboProjNum. I need the values of certain columns to be added to CboMilestones. My spreadsheet is laid out in a paticular order based on a SQL upload that I will have to perform (1st column = project number, 2nd column = milestone 1, 3rd column = must be blank, 4th column = forecasted date, 5th column = actual date, 6th column = Milestone 2, 7th column = blank, 8th = forecasted date, 9th column = actual date....this repeats all the way to milestone 160) I need CboMilestone to populate with all the milestones on the row of selected project number, and then I need TxtADate and TxtFDate to display the dates of the selected milestone for the selected milestone.
Below is a pic of my spreadsheet and a pic of the code i have so far.
[IMG]
[URL]....; base64,
iVBORw0KGgoAAAANSUhEUgAABLMAAALMCAIAAACQRGcbAAAgAElEQVR4n
Oy9W3TcxoHnDdmxdXmi33TO98KTp9nZmbN9xp+
/1cwoy86MM0PvjGc7m3jNxLkgjpzh2DMxkmhsbsaJkChKuFnHgmM7pmzJhmXKbut
iQTIlU9dGJFmkJEaCKImiRFEERV0oiZ
FAXWzqWt9DNUEQKBSARjcbTf5/53d40NWFQgFEs+
vPAroF4SvHha8cF77eJ3y9T/jWOeHJ88KT56c9ddFW+Oc/
[Code]...
I have 2 comboboxes on a userform. In combobox1 I have a list of years which is pre-populated. In combobox2 i have some data. What i'd like to do is to sort combobox2 using the year selected from combobox1.
I have tried this slightly modified code from a different project, but cant get it to work correctly.
The code below autofilters, and selects the correct range, but will not populate the userform combobox... the highlighted row seems to be the problem:
Dim rngToCopy As Range
With Sheets("Project")
.AutoFilterMode = False
.Range("B:B").AutoFilter field:=1, Criteria1:=ComboBox6.Value
With .AutoFilter.Range
On Error Resume Next
Set rngToCopy = .Offset(1, -1).Resize(.Rows.Count - 1).Resize(, 3)
On Error GoTo 0
If rngToCopy Is Nothing Then MsgBox "No projects currently set up for the selected season!...": Exit Sub
End With
rngToCopy.Copy Destination:=UserForm5.ComboBox2.List
.AutoFilterMode = False
End With
In my data, i'd like to return columns A, B and C.
Is there any way to directly go to a formula? Instead of searching it through all the sheets? For example, if I have a formula =SUM(Sheet1!A1:A5) is there any way for me to automatically go to the source?
View 7 Replies View RelatedI would like to retrieve contents of a web page, be it HTML or XML, into VBA variable!
Later, I would chop, cut, parse or extract the data I need.
Both importing as XML or WebQueries is unsatisfactory for a certain number of pages I need. XML has bad schema, WebQuery tells me it can't find any data.
I tried with WinHTTPRequest, but Excel gives me back error "undefined user type" in other words it doesn't recognize that object.
Basically I want the source of web page to become a string in my VBA code. In other words that would be replication of funcionallity of
The problem is, these identifiers are in no discernable or predictable pattern. I cannot open the page directly in excel, nor can I use the Import Data from Web function (2007) ... results are simply a blank page.
What I thought I could do, then, is automate the procedure that obtains the source code, which I can parse and look for the current date. Once I have the line with the current date, I can extract the unique identifier, then paste it back into a string and resubmit to the browser.
I just can't figure out how to get to the source code... anybody out there have a way to get to it? Since this is going to ultimately be distributed to 20 or so analysts in different countries, I don't think I can use other tools (like the HTML Extractor from Iconico).
I need to add what specfic cell was modified on the sheet tab "data" or it could refer to the reference in column A for the specific row within the sheet "data"
View 10 Replies View RelatedI have created some link formula,
Example
CellA1 has ='Corridor Select- Input'!C5.
I was told by a colleague that there is a function in excel that allows me
to auto go to that linkd source. ie if I double click on Cell A1, I can
automatically go to Sheet"CorridorSelect-Input" Cell C5.