I'd like to know if there is a change event that only occurs when a target cell is changed by the user, but does not occur when i'ts changed by a macro. nfortunately, the Worksheet_Change event occurs in both cases.
View 2 Replies
I have CheckBox1 (.Value = FALSE) on the UserForm and when I run my sript ... this change Value to TRUE and run the subrutine Private Sub CheckBox1_Click. I need block this step with using VBA code.
View 4 Replies View Relatedi try with what limited knowledge i have, if you dont mind take a look at the code below, i read your article and added the appropriate line, the code works fine except the msgbox has to be ok'd twice before it exits sub any ideas why?
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
Dim rng As Range
Dim MyCell
Set rng = Range("A2:A100")
If Not Intersect(Target, rng) Is Nothing Then
With rng
For Each MyCell In rng
If MyCell = "" Then
MyCell.Select
MsgBox "Please use this next blank cell"
Exit Sub
End If
Next
End With
End If
End Sub
I ran this code last week and it worked great, but today it doesn't work at all. I have even deleted it, closed Excel and and started fresh. Is there some small thing I'm missing (like hopping on my left foot while entering a code) ...
View 7 Replies View Relatedwhy this code does not work when the worksheet is changed between range "B1:F5"?
Private Sub Worksheet_Change(ByVal Target As Range)
If Not Intersect(Target, Range("B1:F5")) Is Nothing Then
With Range("B1:F5")
Cells(Target.Row, 7) = Cells(Target.Row, 6).Value + Cells(Target.Row, 5).Value
End With
End If
End Sub
I know how to enable/disable events using VBA code, however is there an option within excel to turn it on/off? My problem is this...
At the beginning of my code I disable events and at the end I enable it again (I need to do this to avoid being caught in a loop). However something is going wrong somewhere in my code and the code stops halfway through. I'm trying to test sections of the code, but I often inadvertently stop the code without enabling the events again. Therefore I can't get my VBA to execute again unless I close excel down and restart. This is a pain as I have to find my place in the code again!
I am having difficulties with my Worksheet_Activate() macro. It works great within workbook1 when it is only workbook1 open - but when I open another workbook2, the macro stills runs, presumably because Sheet1 of workbook1 is still activated as well as the newly activated sheet in workbook2.
Is there a way to ensure that only 1 worksheet of 1 workbook is activated at a time? Or that sheet1 of workbook1 is deactivated when workbook2 is opened/clicked on? I need my Worksheet_Deactivate macro to run to get rid of my Worksheet_Activate macro (which runs an application that resets the function of keyboards keys). Otherwise moving around workbook2 is a nightmare. When I navigate back to workbook1 while workbook2 is still open, I still want sheet1 of workbook1 to be activated and my macro to run .
I have a "submit" button macro which user would click after he has finished his input. This macro would update a reference number on the worksheet named "orange" and then print out this worksheet.
My purpose is "orange" is printed out with a reference number.
Below is the 1st code.....
Bit of an odd one, but I'm sure it's probably happened before to others. I've just been sent a worksheet to redesign (an audit template) one which I'll be making use of data validation lists (Yes, No, N/A) a fair bit.
What I want to happen is that when the user selects from a list, I'll fire a Worksheet_Change event, which will then run some background calculations to set up the next questions, etc. Problem is, the event isn't firing at all. I'm using the following to test the event...
I wrote a simple script to show/hide certain rows based on the value of a certain cell on my worksheet (cell value chosen by drop down). When I left work last night, everything worked fine. When I returned this morning, the change event no longer appears to be firing. I'm quite certain no one else accessed the file to change the coding, so my only guesses are 1)perhaps some sort of system update was applied in the middle of the night and it messed with something or 2) aliens have blocked our technology in advance of their invasion.
Private Sub Worksheet_Change(ByVal Target As Range)
On Error Resume Next
If Target.Address = "F1" Then
Application.EnableEvents = False
Select Case Target
Case "150"
Rows("13").EntireRow.Hidden = False
Rows("14:19").EntireRow.Hidden = True
Case "330"
Rows("14").EntireRow.Hidden = False
Rows("13").EntireRow.Hidden = True
Rows("15:19").EntireRow.Hidden = True
Case "340"
Rows("15:19").EntireRow.Hidden = False
Rows("13:14").EntireRow.Hidden = True
Case Else
Rows("13:19").EntireRow.Hidden = True
End Select
Application.EnableEvents = True
End If
End Sub
I have a spreadsheet with a table of values in range E5 to T158.
A macro populates the table by looking up values on other sheets in the book. If the macro finds a value in the lookup for Row 7 of any column (ie E7,F7...T7) it populates the rest of the column with that value (E7 value gets pasted to E8:E158) THEN it protects the cells it pasted (E8:E158).
If the macro does NOT find a value for row 7, it simply skips it, leaving it blank, and continues to row 8 until it reaches row 158 of each column E to T.
I want to give the user flexibility with these values. So if the user either deletes E7 or changes the value of the contents in E7, I want to unprotect the cells of rows 8 to 158 for that column.
I have created a
Private Sub Worksheet_Change(ByVal Target As Range)
in the private module for that sheet below. I thought it was working but it isn't doing anything when I change or delete the value in Cell E7 for example. Please help!
Private Sub Worksheet_Change(ByVal Target As Range)
'Do nothing if more than one cell is changed
If Target.Cells.count > 1 Then Exit Sub 'Or IsEmpty(Target)
button on main workbook opens 2 other workbooks and assigns a workbook object to them. the 2 opened workbooks are Activated in turn, range values changed and macros on these sheets invoked and results captured and pasted back onto the starter workbook. the macro is within a sub in a module as are the ones in the second workbook. An example of the code used is:
Application.ScreenUpdating = True
Application.EnableEvents = True
Application.Calculation = xlCalculationAutomatic
Dim wkbTest As Workbook
Set wkbTest = Workbooks("Test.xls")
wkbTest.Activate
Sheets("G").Activate
Range("Today").Value = Format(Now(), "dd-mmm-yy")
Application.Run "'" & wkbTest.Name & "'" & "!TestMacro" ............
I want to be able to reset the value in a combobox, but without the combobox executing code, when it resets. Is there any way of doing this?
I have tried the code below but the ComboBox still executes when its value is changed.
Sub Reset_combobox()
Worksheets("Sheet1").ComboBox1.Enabled = False
Worksheets("Sheet1").ComboBox1.Value = 1
Worksheets("Sheet1").ComboBox1.Enabled = True
End Sub
The workbook containing the above is attached.
Private Sub Worksheet_Change(ByVal Target As Range)
With Target.Cells(1, 1)
If Not Intersect(.Cells, Range("b3:b6")) Is Nothing Then
Range("b7") = "Not Found"
For i = 3 To 6: txt = txt & Cells(i, "b").Value & "_": Next
For Each r In Range("m3", Cells(3, Columns.Count).End(xlToLeft))
For i = 0 To 3: txt2 = txt2 & r.Offset(i).Value & "_": Next
If txt = txt2 Then
Range("b7").Value = r.Offset(4).Value
Exit For
End If
txt2 = ""
Next
ElseIf Not Intersect(.Cells, Range("b16:b19")) Is Nothing Then
Range("b20") = "Not Found".....................
I'm working with this code right now. The problem is the macro will only work if i type the numbers manually. if the values are retrieved from a combobox, the code above down not work as it cannot read the values.
I've set up code where when a cell within a specified range of cells is selected, a macro will run. This works all well and good except for when a whole row, column or range containing the defined cells is selected, there is a run time error. There is no situation where I want multiple cells selected to run the macro, so I only want to run the macro when only a single cell within that range is selected.
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
If Not Intersect(Target, Range("GoToRange")) Is Nothing Then
Application.Run "'Macro Test Current MY PFEP Metrics.xls'!PFEP_Filter"
End If
If Not Intersect(Target, Range("GoToRange2")) Is Nothing Then
Application.Run "'Macro Test Current MY PFEP Metrics.xls'!PFEP_Filter"
End If
End Sub
The ranges defined are non-contigious ranges.
When I paste data in Sheet2 in the attached CF Example2 file (Just by Selecting A1:L18 Cutting it and Pasting in the same place), the action of the VBA code in the Thisworkbook is correct but I am getting the 1004 Error Message from the VBA debugger saying "Run-time Error '1004': Application-defined or object-defined error
View 2 Replies View RelatedI have used the code for formatting: http://www.ozgrid.com/VBA/excel-cond...ting-limit.htm. This works fine when typing in the numbers manualy but if I have a formula (eg:A1=b1+c1) and a1 = 15 nothing happens. Is there an update button or a better way to do this?
View 2 Replies View RelatedI'm having some trouble getting control ENTER & EXIT events to fire properly when having controls embedded on frames within a userform. I'm using Excel 2003, 2007, & 2010. Here's the userforms I'm working with:
With FRAME:
Without FRAME:
In both cases, the DESCRIPTION field is disabled. The selectable controls on both are a combo-box, textbox, listbox, & 2 buttons. On the FRAMED version, the combo-box & textbox are contained on a FRAME.
Here's the code, same on both userforms:
Code:
Option Explicit
Private Sub cmbRecipes_Enter()
ListBox1.AddItem "ENTER - " & cmbRecipes.Value
End Sub
Private Sub cmbRecipes_Exit(ByVal Cancel As MSForms.ReturnBoolean)
ListBox1.AddItem "EXIT - " & cmbRecipes.Value
End Sub
All this is doing is posting a message to the listbox when the combo-box ENTER & EXIT events fire. This works as expected without the FRAME, ENTER is shown when the combo-box is entered and EXIT is shown as focus is moved to another control. But when running it on the FRAMED version all I get is a single ENTER event recorded regardless of how I move the focus through the control set.
Another oddity is that if I have more than 1 control that can receive focus on the FRAMED version, it appears to work correctly.
Is there a way to prevent access to the code of a macro? I am interested in sending out some macro's, but would prefer that the user only be able to run them, and not be able to access the code via the edit button. Curiously, there have been occasion's where I wanted to edit my own work, but the edit button did not function, so I had to exit and start over to proceed. From this I'm guessing there must be a way.
View 2 Replies View RelatedI have to issue template workbooks to people for budgeting purposes.
Within the workbooks are various numbers of worksheets pre -formatted and ready for these people to enter data.
Some of the data in the worksheets is important to them as individuals but not to me so I have a series of macros that lift the information from the worksheets and put it into a worksheet more specific to me.
Because the users are on the whole not that good with Excel I have put in easy to use look up tables and various proctections to stop them adding or deleting rows or columns as this plays havoc with my macros.
There is one thing I have "so far" been unable to do and I wondered if anyone could help.
Is there a macro that I could put somewhere in the workbook which would detect when someone tried to cut and paste and would either put up a message box or stop them doing this?
The reason being they are cutting from one row to another and this is messing up the calculations which are protected.
Is there also a way to stop them changing the name on the sheet tab in the smae way?
how I can disable an InputBox? I've got some code that whenever someone selects a cell in a specified range, an input box pops up (running a macro) - this can get annoying sometimes though if just browsing. Does anyone know a macro where I can "disable" this?
View 4 Replies View RelatedI have looked at a series of Change Event topics and code but can't see what I need. I simply want a macro to run automatically when a cell ....which contains the Maximum time from a range.... changes. I assume I use .... Private Sub Worksheet_Change(ByVal Target As Excel.Range) ...but I have no idea what code to use...
View 4 Replies View RelatedI'm trying to find a way to bypass a worksheet_change event. Right now, my code validates if a change has been done to a specific cell ("D13"). It works perfectly, too perfectly actually.
Here is the code I got :
First line of Module 1 :
Public bDeviation As Boolean
On Sheet1 :
Public Sub Worksheet_Change(ByVal Target As Excel.Range)
Dim VRange As Range
Dim strName As String
Application. ScreenUpdating = False
I have a sales spreadsheet, that people on this forum have very kindly helped me with by giving me two macros; one to remind users that they need to update the month cell when an order comes in, and the other to automatically put the date in a cell when any cell in that row is changed.
The final thread is here: Message To Remind That Cell Is Mandatory
and the Macro used is:
Private Sub Worksheet_Change(ByVal Target As Range)
Dim c As Range
Application.EnableEvents = False
For Each c In Target
If c.Column = 11 Then
If c.Value = "100 - Purchase Order In" Then
MsgBox "Is the Month In correct?"
End If
End If
If c.Column > 1 And c.Column < 18 Then
Cells(c.Row, 1) = Now
End If
Next c
Application.EnableEvents = True
End Sub
However...
We've now found that we cannot undo anything in these spreadsheets. If, for example, a cell is incorrectly copied or deleted, the only way of undoing the change is to shut down the spreadsheet without saving!
Is this just a by-product of using the time macro (a search on other threads suggests that it might be), and, if so, is there any way of changing it?
I've developed a little software using Excel Macros & VB. To prevent people from accesing the code I protected the code blocking it from visualization. It seems not enough as an acquaintance of a friend cracked it in 25 minutes. Or so he says. So I'd like to know if there is a better way to protect the font code.
View 8 Replies View RelatedI'd like the users to be able to change some detail in a couple of places and have it updated throughout the spreadsheet. Basically, the user can change the line name in any of the input sheets and the code changes the sheet name, and searches for the reference to the old name in the overview sheet and changes it accordingly.
The problem I have at the moment is that I would also like the user to be able to change the line name from the overview sheet too... I am having trouble thinking how to have similar code in the "Overview" sheets Worksheet_Change event without getting into a big constant loop... e.g. if the line name is changed via code on the individual input sheets won't that then trigger the first code, which will trigger the second etc. etc. I have the following code in the ThisWorkbook section:
Private Sub Workbook_SheetChange(ByVal Sh As Object, ByVal Target As Range)
Dim sName As String
Dim sOldName As String
Application. ScreenUpdating = False
sOldName = ActiveSheet.Name
If Target.Address <> "$B$1" Then Exit Sub
sName = ActiveSheet.Range("B1")
On Error Goto ErrorHandler
ActiveSheet.Name = sName
On Error Goto 0
Sheet8.Select 'this is the overview sheet
Cells. Find(What:=sOldName, LookIn:=xlValues, _
LookAt:=xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, _
MatchCase:=False, SearchFormat:=False).Activate........................
I have a userform with a combobox in it that's rowsource is a column of company names in a worksheet. When a company name is chosen, a combobox change private sub runs and many userform textboxes are populated with information about the company that was chosen from the combobox dropdown. This information is stored on a worksheet. I then want to edit any of the information in these textboxes. Once my edits are made I have a CommandButton that is pressed to save the edit changes. This CommandButton runs a private sub that disables the combobox (thinking this would prevent the combobox private sub from running), deletes the row that the information originated from, and then SHOULD make a new row of values based on the contents of the textboxes following the edits. The problem is that the CommandButton coding that deletes the row causes the combobox change private sub to run because the company that had been selected is now the missing from the rowsource; this causes an error.
View 8 Replies View RelatedI use excel 2002 but some of my office are on 97, i want to add a small workbook open event code which works for me but debugs for the others?? The code is basically, go to a tab, on that tab and that range sort..
View 2 Replies View RelatedIs there a code that can be input to prevent a document from being printed?
View 8 Replies View RelatedIs is possible to use VBA to remove/delete a macro and also remove code like this on worksheets:
Private Sub Worksheet_Change
End Sub
Private Sub Worksheet_Activate()
End Sub
