Stop Controls Change Event Firing
Nov 6, 2006
I want to be able to reset the value in a combobox, but without the combobox executing code, when it resets. Is there any way of doing this?
I have tried the code below but the ComboBox still executes when its value is changed.
Sub Reset_combobox()
Worksheets("Sheet1").ComboBox1.Enabled = False
Worksheets("Sheet1").ComboBox1.Value = 1
Worksheets("Sheet1").ComboBox1.Enabled = True
End Sub
The workbook containing the above is attached.
View 7 Replies
ADVERTISEMENT
Oct 12, 2007
I've set up code where when a cell within a specified range of cells is selected, a macro will run. This works all well and good except for when a whole row, column or range containing the defined cells is selected, there is a run time error. There is no situation where I want multiple cells selected to run the macro, so I only want to run the macro when only a single cell within that range is selected.
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
If Not Intersect(Target, Range("GoToRange")) Is Nothing Then
Application.Run "'Macro Test Current MY PFEP Metrics.xls'!PFEP_Filter"
End If
If Not Intersect(Target, Range("GoToRange2")) Is Nothing Then
Application.Run "'Macro Test Current MY PFEP Metrics.xls'!PFEP_Filter"
End If
End Sub
The ranges defined are non-contigious ranges.
View 3 Replies
View Related
Aug 22, 2007
I have a spreadsheet with a table of values in range E5 to T158.
A macro populates the table by looking up values on other sheets in the book. If the macro finds a value in the lookup for Row 7 of any column (ie E7,F7...T7) it populates the rest of the column with that value (E7 value gets pasted to E8:E158) THEN it protects the cells it pasted (E8:E158).
If the macro does NOT find a value for row 7, it simply skips it, leaving it blank, and continues to row 8 until it reaches row 158 of each column E to T.
I want to give the user flexibility with these values. So if the user either deletes E7 or changes the value of the contents in E7, I want to unprotect the cells of rows 8 to 158 for that column.
I have created a
Private Sub Worksheet_Change(ByVal Target As Range)
in the private module for that sheet below. I thought it was working but it isn't doing anything when I change or delete the value in Cell E7 for example. Please help!
Private Sub Worksheet_Change(ByVal Target As Range)
'Do nothing if more than one cell is changed
If Target.Cells.count > 1 Then Exit Sub 'Or IsEmpty(Target)
View 5 Replies
View Related
Sep 27, 2007
I ran this code last week and it worked great, but today it doesn't work at all. I have even deleted it, closed Excel and and started fresh. Is there some small thing I'm missing (like hopping on my left foot while entering a code) ...
View 7 Replies
View Related
Nov 22, 2006
how I can disable an InputBox? I've got some code that whenever someone selects a cell in a specified range, an input box pops up (running a macro) - this can get annoying sometimes though if just browsing. Does anyone know a macro where I can "disable" this?
View 4 Replies
View Related
Dec 4, 2006
Private Sub Worksheet_Change(ByVal Target As Range)
With Target.Cells(1, 1)
If Not Intersect(.Cells, Range("b3:b6")) Is Nothing Then
Range("b7") = "Not Found"
For i = 3 To 6: txt = txt & Cells(i, "b").Value & "_": Next
For Each r In Range("m3", Cells(3, Columns.Count).End(xlToLeft))
For i = 0 To 3: txt2 = txt2 & r.Offset(i).Value & "_": Next
If txt = txt2 Then
Range("b7").Value = r.Offset(4).Value
Exit For
End If
txt2 = ""
Next
ElseIf Not Intersect(.Cells, Range("b16:b19")) Is Nothing Then
Range("b20") = "Not Found".....................
I'm working with this code right now. The problem is the macro will only work if i type the numbers manually. if the values are retrieved from a combobox, the code above down not work as it cannot read the values.
View 9 Replies
View Related
Nov 1, 2006
When I paste data in Sheet2 in the attached CF Example2 file (Just by Selecting A1:L18 Cutting it and Pasting in the same place), the action of the VBA code in the Thisworkbook is correct but I am getting the 1004 Error Message from the VBA debugger saying "Run-time Error '1004': Application-defined or object-defined error
View 2 Replies
View Related
Sep 25, 2007
I have used the code for formatting: http://www.ozgrid.com/VBA/excel-cond...ting-limit.htm. This works fine when typing in the numbers manualy but if I have a formula (eg:A1=b1+c1) and a1 = 15 nothing happens. Is there an update button or a better way to do this?
View 2 Replies
View Related
Oct 18, 2006
I have a "submit" button macro which user would click after he has finished his input. This macro would update a reference number on the worksheet named "orange" and then print out this worksheet.
My purpose is "orange" is printed out with a reference number.
Below is the 1st code.....
View 9 Replies
View Related
Nov 20, 2006
I have a class module (MyCtrlEvents) with a sub (TxtGroup_Change) which I want to handle on a change event for some specific textboxes.
When the form is opening I don't get the correct sum for the textbox "TBSum601". It should be 200 but I get 14464
When I then also change a number in the form for any control like "TB7%", the change trigger event doesn't seem to occur....
View 9 Replies
View Related
Nov 2, 2008
Bit of an odd one, but I'm sure it's probably happened before to others. I've just been sent a worksheet to redesign (an audit template) one which I'll be making use of data validation lists (Yes, No, N/A) a fair bit.
What I want to happen is that when the user selects from a list, I'll fire a Worksheet_Change event, which will then run some background calculations to set up the next questions, etc. Problem is, the event isn't firing at all. I'm using the following to test the event...
View 2 Replies
View Related
Jan 16, 2008
I wrote a simple script to show/hide certain rows based on the value of a certain cell on my worksheet (cell value chosen by drop down). When I left work last night, everything worked fine. When I returned this morning, the change event no longer appears to be firing. I'm quite certain no one else accessed the file to change the coding, so my only guesses are 1)perhaps some sort of system update was applied in the middle of the night and it messed with something or 2) aliens have blocked our technology in advance of their invasion.
Private Sub Worksheet_Change(ByVal Target As Range)
On Error Resume Next
If Target.Address = "F1" Then
Application.EnableEvents = False
Select Case Target
Case "150"
Rows("13").EntireRow.Hidden = False
Rows("14:19").EntireRow.Hidden = True
Case "330"
Rows("14").EntireRow.Hidden = False
Rows("13").EntireRow.Hidden = True
Rows("15:19").EntireRow.Hidden = True
Case "340"
Rows("15:19").EntireRow.Hidden = False
Rows("13:14").EntireRow.Hidden = True
Case Else
Rows("13:19").EntireRow.Hidden = True
End Select
Application.EnableEvents = True
End If
End Sub
View 9 Replies
View Related
Nov 2, 2006
i try with what limited knowledge i have, if you dont mind take a look at the code below, i read your article and added the appropriate line, the code works fine except the msgbox has to be ok'd twice before it exits sub any ideas why?
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
Dim rng As Range
Dim MyCell
Set rng = Range("A2:A100")
If Not Intersect(Target, rng) Is Nothing Then
With rng
For Each MyCell In rng
If MyCell = "" Then
MyCell.Select
MsgBox "Please use this next blank cell"
Exit Sub
End If
Next
End With
End If
End Sub
View 2 Replies
View Related
Mar 19, 2008
button on main workbook opens 2 other workbooks and assigns a workbook object to them. the 2 opened workbooks are Activated in turn, range values changed and macros on these sheets invoked and results captured and pasted back onto the starter workbook. the macro is within a sub in a module as are the ones in the second workbook. An example of the code used is:
Application.ScreenUpdating = True
Application.EnableEvents = True
Application.Calculation = xlCalculationAutomatic
Dim wkbTest As Workbook
Set wkbTest = Workbooks("Test.xls")
wkbTest.Activate
Sheets("G").Activate
Range("Today").Value = Format(Now(), "dd-mmm-yy")
Application.Run "'" & wkbTest.Name & "'" & "!TestMacro" ............
View 5 Replies
View Related
Nov 23, 2009
I'd like to know if there is a change event that only occurs when a target cell is changed by the user, but does not occur when i'ts changed by a macro. nfortunately, the Worksheet_Change event occurs in both cases.
View 2 Replies
View Related
Apr 27, 2008
I have CheckBox1 (.Value = FALSE) on the UserForm and when I run my sript ... this change Value to TRUE and run the subrutine Private Sub CheckBox1_Click. I need block this step with using VBA code.
View 4 Replies
View Related
Jun 27, 2008
why this code does not work when the worksheet is changed between range "B1:F5"?
Private Sub Worksheet_Change(ByVal Target As Range)
If Not Intersect(Target, Range("B1:F5")) Is Nothing Then
With Range("B1:F5")
Cells(Target.Row, 7) = Cells(Target.Row, 6).Value + Cells(Target.Row, 5).Value
End With
End If
End Sub
View 3 Replies
View Related
Sep 8, 2006
I've several check boxes on a worksheet. Some of the check boxes control the values of other through the _click event. However, when I try to change the value the event attached to the control in questions fires.
application.enableevents = False
would prevent events being fire from within the macro but this only seems to work when I step through the code.
I understand that I could set a global variable to do this and will probably go down this route anyway - but I am interested to know how/when I should be using the EnableEvent method (as I am sure this should be the way that I use it)
View 9 Replies
View Related
Oct 22, 2011
I'm having some trouble getting control ENTER & EXIT events to fire properly when having controls embedded on frames within a userform. I'm using Excel 2003, 2007, & 2010. Here's the userforms I'm working with:
With FRAME:
Without FRAME:
In both cases, the DESCRIPTION field is disabled. The selectable controls on both are a combo-box, textbox, listbox, & 2 buttons. On the FRAMED version, the combo-box & textbox are contained on a FRAME.
Here's the code, same on both userforms:
Code:
Option Explicit
Private Sub cmbRecipes_Enter()
ListBox1.AddItem "ENTER - " & cmbRecipes.Value
End Sub
Private Sub cmbRecipes_Exit(ByVal Cancel As MSForms.ReturnBoolean)
ListBox1.AddItem "EXIT - " & cmbRecipes.Value
End Sub
All this is doing is posting a message to the listbox when the combo-box ENTER & EXIT events fire. This works as expected without the FRAME, ENTER is shown when the combo-box is entered and EXIT is shown as focus is moved to another control. But when running it on the FRAMED version all I get is a single ENTER event recorded regardless of how I move the focus through the control set.
Another oddity is that if I have more than 1 control that can receive focus on the FRAMED version, it appears to work correctly.
View 6 Replies
View Related
Mar 17, 2014
The code below will put "Some text" into column B when data is pasted into column D. This only works when copying data into one cell. If I copy into multiple cells of column D then the code does not run at all.
[Code] ......
View 4 Replies
View Related
Dec 14, 2009
I am having trouble working through the examples given on other posts for this topic. I have a userform that creates a number of controls at runtime. One group of controls is a series of textboxes and a label underneath that sums the values of the textboxes. When a user changes the value in a textbox the label needs to update the sum. I have read about created class modules to define the event but it is all going over my head.
A piece of the code that creates the controls is:
View 14 Replies
View Related
Dec 31, 2006
Is there a way to fix a private sub to catch keydown effect of various combos and textboxes of my userform?
Instead of typing the same thing to each and every control's keydown event just call a sub. Code goes like:
Select Case KeyCode
Case 112
ShellExecute 0, "open", "hh.exe", ThisWorkbook.Path & "1.chm", "", 1
Case 113
If MsgBox("Backup now", vbQuestion + vbYesNo) = vbYes Then BackUp
Case 114
Col = 3
SearchD
Case 115
showexcel
Case 116
readonly
e.c.t.
Instead of that, if i place code in a private sub test() just call test in keydown event
View 9 Replies
View Related
Mar 27, 2009
Is there a way to write a Worksheet_SelectionChange (ByVal Target As Range) event in module after creating a sheet in VBA? I constantly delete a sheet, then repopulate it with a new one that is empty, but I need to add some code that happens if they should change a particular cell. It worked when I ran it on a worksheet without refreshing, but as soon as I cleared and repopulated the sheet, it was gone. Is there a way to preserve this?
View 9 Replies
View Related
May 21, 2008
I have a code that adds a couple of ComboBoxes to a UserForm (the number of ComboBoxes is variable). Now that I want to control a certain ComboBox based on the selected value of another ComboBox (change or click event), how do I do that via VBA code?
View 3 Replies
View Related
Aug 7, 2006
I have the following code, which works perfectly:
Private Sub Worksheet_Change(ByVal Target As Range)
Dim TotalDays As Integer
TotalDays = Range("C65536").End(xlUp).Row + 1
The code points to the next blank cell so the user can input a value. Each time the user enters a value I want to re-run the code so that the colour of the cell changes.
However I also want to perform various calculations on the sheet. However this means the sheet is being changed and so continually repeats my code.
How do I add the following, to my previous code?
Range("E8").Value = Cells(7, 6) * 2.5
View 9 Replies
View Related
Nov 11, 2006
I have a real simple question about what command to enter in order to stop a macro. All the macro does is "press the F9 key" every second. I use a button to start the loop but I am unable to find a way to use another button to stop the process. Ive copied my macro below:
Sub Go()
Calculate
Application .OnTime Now + TimeValue("00:00:01"), "Go"
End Sub
Private Sub CommandButton1_Click() "Go Button"
Application.OnTime Now + TimeValue("00:00:01"), "Go"
End Sub
Private Sub CommandButton2_Click() "Stop Button"
'????????????????????????
End Sub
View 2 Replies
View Related
Jul 3, 2007
I've been setting the above property to TRUE after making some changes in the Workbook_open event in order to stop annoying messages if you haven't physically made changes.
Unfortunately, it doesn't seem to copy through to the workbook_beforeclose event and I'm being asked if I want to save changes even though the macro made the changes and then set the property.
Here's my code for the open event :-
Private Sub Workbook_Open()
Application.ScreenUpdating = False
On Error Resume Next
For counter = Worksheets.Count To 2 Step -1
Sheets(counter).Visible = xlVeryHidden
Next
Sheets("Desktop").Visible = True
Sheets(1).Visible = xlVeryHidden.....
View 9 Replies
View Related
Jun 17, 2009
an event macro to change the font colour of a cell whose value changes as a result of a calculation.
View 9 Replies
View Related
Jul 21, 2009
Attached is book in which, when a choice is selected from Drop Down list in ColumnF the macro has to do the need.
When the macro was written it was working well. But when I tried to change it as a Worksheet_SelectionChange event nothing is happenning even though a choice is selected from drop down list.
View 4 Replies
View Related
Dec 6, 2011
Basically the situation I have is Sheet2 has many references to cells in Sheet1. Sheet2 is for all intents and purposes a kind of nicely formatted report form, and Sheet1 is the input form.
My ultimate goal is to automatically resize row heights on Sheet2 when cell contents change on Sheet2.
Using a worksheet_change event isn't working I presume because it doesn't see the formula output change as a worksheet change, the worksheet_change is firing only when the input is changed in Sheet1.
how can I capture these formula output changes on Sheet2 (triggered from input on Sheet1) OR is there a way of making a particular sheets rows always adjust in height to best fit?
View 5 Replies
View Related
