I have a "submit" button macro which user would click after he has finished his input. This macro would update a reference number on the worksheet named "orange" and then print out this worksheet.
My purpose is "orange" is printed out with a reference number.
Below is the 1st code.....
I want to be able to reset the value in a combobox, but without the combobox executing code, when it resets. Is there any way of doing this?
I have tried the code below but the ComboBox still executes when its value is changed.
Sub Reset_combobox()
Worksheets("Sheet1").ComboBox1.Enabled = False
Worksheets("Sheet1").ComboBox1.Value = 1
Worksheets("Sheet1").ComboBox1.Enabled = True
End Sub
The workbook containing the above is attached.
I've set up code where when a cell within a specified range of cells is selected, a macro will run. This works all well and good except for when a whole row, column or range containing the defined cells is selected, there is a run time error. There is no situation where I want multiple cells selected to run the macro, so I only want to run the macro when only a single cell within that range is selected.
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
If Not Intersect(Target, Range("GoToRange")) Is Nothing Then
Application.Run "'Macro Test Current MY PFEP Metrics.xls'!PFEP_Filter"
End If
If Not Intersect(Target, Range("GoToRange2")) Is Nothing Then
Application.Run "'Macro Test Current MY PFEP Metrics.xls'!PFEP_Filter"
End If
End Sub
The ranges defined are non-contigious ranges.
with an event macro. Basically I have a workbook with 11 worksheets and have created a macro that increases the value of cell J3 by 1 in Sheet1. However at present it only works from Sheet5, but I now need it to run from Sheet6 and Sheet11 as well and not from any other worksheets. The code I have is as follows
Private Sub Workbook_BeforePrint(Cancel As Boolean)
If ActiveSheet.CodeName = "Sheet5" Then
With Sheet1
.Range("J3").Value = .Range("J3").Value + 1
End With
End If
End Sub
I've found some code which works to print certain pages with value in cell A1 but I need to print dynamic ranges on some of the sheets as they will have filters on so the rows ranges will be different each time.
So far this is what I have but the dynamic range part is not working:
VB:
Sub Print_All_Worksheets_With_Value_In_A1()
Dim Sh As Worksheet
Dim Arr() As String
Dim N As Integer
[Code] ....
I'd like to know if there is a change event that only occurs when a target cell is changed by the user, but does not occur when i'ts changed by a macro. nfortunately, the Worksheet_Change event occurs in both cases.
View 2 Replies View RelatedI have a few macros that run in a sheet. After the macros are finnished I would like to present to the user a msgbox that asks if they would like to print. if "Yes" is selected, the print macro runs. If "No" is pressed then nothing happens.
View 3 Replies View RelatedI have found a macro which disables all print features in excel. I have rwo other codes to print. When I put this macro, It also disables the print from the other macro. How can I use this code so that normal print features will be disabled but if someone takes the print from the macros, Print will be allowed. The code which disables the print is given below:
Private Sub Workbook_BeforePrint(Cancel As Boolean)
If PrtOK Then
Cancel = False
Else
MsgBox "Can't print from here!"
Cancel = True
End If
End Sub
Using Excel 2003 I am trying to write a macro to set the print area according to the amount of data in a particular range of cells. I find I can include this instruction
View 2 Replies View RelatedI have a Word document that I'd like to print first, when I click Print on a specific worksheet (not on Print of other worksheets in the workbook, just the one). The worksheet contains customer information and is essentially a cover page for the Word document. the Word document already prints in reverse order, as does the worksheet, so I just need the Word doc to print prior to the worksheet/cover, to give me the total print package in the correct order. I've tried using the following code in the Sheet object for the worksheet in question;
Private Sub Worksheet_BeforePrintEvent()
Dim appWd As Word.Application
Set appWd = CreateObject("Word.Application")
appWd.Visible = True 'Change to False when code is good
'Open Doc
appWd.Documents.Open Filename:="S:BryanQuoting ToolsP'Binder Leading Pages.doc"
'Print Doc
appWd.ActiveDocument.PrintPreview 'Change to PrintOut when code is good
'Close Doc
Set appWd = Nothing
End Sub
Is there a way of capturing the print event to run some code?
I.e. The 'Print' button is clicked and then code executed in the sheet.
I have a before print event that shows a userform - the user can then select which worksheets they want printed and select a command button. I then have a loop set up that loops through the selected workbooks and prints them. The problem is I am not sure how to tell VBA to print without it going back to the Before Print event userform.
View 9 Replies View RelatedI have a project report, which is user-configurable, allowing the user to customise the data that is displayed based on a number of parameters.
To ensure the report always prints neatly (the number of visible columns and rows varies, depending on the above parameters), so I have a macro that dynamically sets the print area of the worksheet.
At present, I call the macro from the workbook.beforeprint event, which works fine in terms of printing. Ideally however, I would like the macro to be called when CTRL+P is first pressed - i.e. the resulting 'print screen', containing a preview of the print out should reflect what will subsequently be printed, when the 'Print' button is then pressed.
I am not sure if this makes sense (Excel 2010 and 2013 are different from previous versions).
I have a dynamic print range defined as follows:-
=OFFSET(Sheet1!$A$1,0,0,MATCH("PRINT_AREA_ROWS",Sheet1!$A:$A,0),MATCH("PRINT_AREA_COLUMNS",Sheet1!$1:$1,0)), lets say this equates to range("A1:D12")
I also have a workbook beforeprint event defined as follows:-
Private Sub Workbook_BeforePrint(Cancel As Boolean)
ActiveSheet.PageSetup.LeftFooter = "Pete"
End Sub
My problem is that after the Print Event has fired , the dynamic range has been converted into a static one i.e range("A1:D12"). I have tried this on all version of Excel from 97 to 2007 and it behaves the same so premably this must be by design rather than a bug?
Am I doing something wrong? What is the work around? I'd rather not have to create the dynamic range within the print event procedure unless I have to as my workbook has many, many tabs!
All sheets are basically the same except some minor values, names and addresses. There is one page per sheet and all pages are in portrait format. The print preview shows all the pages in order but when I print it, it makes multiple print jobs of 1 to 2 pages each and prints them all out of order. I don't know why it is splitting up the workbook or why it changes the order. I print and reorder these weekly, which is a major pain. It comes out in the same order each time but it is the wrong order.
View 1 Replies View RelatedI am trying to have a file print in legal size if I have 56 lines filled in
otherwise print in regular letter size. Does anyone know how to write this
in VBA.
Since upgrading to Windows 2007 (I was already using Excel 2007) I am having issues with the content in the cells on the worksheet not appearing the same on Print Preview and when I print. On the worksheet the cell show to be at the best fit both horizontally and vertically. When I look at the contents under print preview, the contents are squashed from the top and cut off from the left. This happens whether I have the format in Top or Central align and is even worse if I use Bottom align. It is also somewhat worse if I have thickened boarders.
I am using TrueType Fonts.
Using Excel 2010: I have 2 rows (A4:J4 & A5:J5) selected as print titles that I would like to be printed at the top of selected pages. Currently, my document is 3 pages long, and I would like to have the print titles only applied to the first 2 pages. More data will be added in the future on pages 1&2 but the last page (whatever page number it ends up being) should not contain the selected print titles.
View 2 Replies View RelatedI just converted from Excel 2003 to 2007 and print previewed a worksheet and find a tiny image with a small portion of the print area. When I look at the sheet in page break preview mode, I see the 8.5 x 11 sheet broken up into approx 77 smaller sheets. When I try to move the page breaks to include the whole sheet it states the change cannot be made as it will result in an image less than 10%. I have attached two images - the first shows the print preview I get, and the second show the multiple pages when I view in page break.
View 4 Replies View RelatedI am having trouble disabling the "Preview" button when calling Application.Dialogs(xldialogprint) in XL2003. I have an xlSheetVeryHidden worksheet containing a form which is made visible programatically when the user wishes to print a copy (code below). I want the user to be able to have access to the functionality of the xlDialogPrint dialog (i.e. select desired print destination, number of copies, pages per sheet etc.) but I also want to prevent them modifying the page setup of the protected worksheet by initiating a preview from the print dialog.
Private Sub btnPrintReturnForm_Click()
wbkRUSC.Unprotect sysPass 'unprotect workbook to enable changes to sheet visibility
' (sysPass is project constant string containing password)
shtStaffForm.Visible = xlSheetVisible 'make staff form visible
shtCalc.Visible = xlSheetVeryHidden 'hide main calculator in case user gets smart and hits..............................
I have a pretty large spreadsheet set up that invoices our clients. A few tabs in the front allow us to globally invoice if we did certain services for all clients and then we can also go into each tab and invoice each client for specific services performed on their property. Some invoices are two pages long and other may be up to seven pages long and anywhere in between... So that's the first issue, how do you find how many pages to print and then set the print range for each invoice.
The second issue centers around being able to print all the invoices at one time.
The spreadsheet is set up in this manner: A recap sheet we print to check off that each invoice was printed; an IIF statement to get the Excel info into QuickBooks; a template to set up each invoice's information with dates, dates services were performed,etc.; then there are five Global billing tabs where I can invoice all accounts globally or by their type of account (Saturday or Sunday open, 24/7 etc.); then we get into the tabs for each account. Each account has its own tab with an invoice loaded inside where we can itemize the services they received. Inside all these individual account tabs we have set up 'Zone' tabs where we can invoice all the clients we set up within a zone. There are about twenty of these tabs. Then at the end I have a few more tabs that aren't used any longer, there are about ten tabs there...
Is there a way I can hit Print and get all of my invoices to print out at one time versus having to go into each and every tab, set the print range, and then hit Print for all 250ish invoices?
This is the biggest complaint I have right now about the invoicing program I have set up...
I am trying to come up with a way to print out data that is variable in the amount of rows to print.
1. Cells C1 thru M6 is heading of report
2. Cells C7 thru M400 all have formulas and display information only when criteria in Column C in each row is met, if condition is not met it displays no informtion. (There lies my problem).
I need a way to print out only the area that information is displayed in and skip the areas that are not displayed. (Currently I have hard coded the print range using the largest report)
I want my worksheet to require validation of entry data before printing, so I decided to use the "Workbook_BeforePrint" event, and display a simple dialog box with an "ok" or a "cancel" button as input options.
The problem is that, as coded, "cancel" button does not cancel the print.
I have a spreadsheet with 28 visible tabs. When I select all tabs and print, I get 3 cover (or banner) pages...I like having the first banner page, but the other two are in the middle of my report. I assume excel is sending 3 print jobs and I'm not sure why.
I've seen a couple of posts regarding this issue when using VBA, but I'm not using VBA...just selecting all the sheets and sending a single print job, but get 3 banner pages.
Bit of an odd one, but I'm sure it's probably happened before to others. I've just been sent a worksheet to redesign (an audit template) one which I'll be making use of data validation lists (Yes, No, N/A) a fair bit.
What I want to happen is that when the user selects from a list, I'll fire a Worksheet_Change event, which will then run some background calculations to set up the next questions, etc. Problem is, the event isn't firing at all. I'm using the following to test the event...
I wrote a simple script to show/hide certain rows based on the value of a certain cell on my worksheet (cell value chosen by drop down). When I left work last night, everything worked fine. When I returned this morning, the change event no longer appears to be firing. I'm quite certain no one else accessed the file to change the coding, so my only guesses are 1)perhaps some sort of system update was applied in the middle of the night and it messed with something or 2) aliens have blocked our technology in advance of their invasion.
Private Sub Worksheet_Change(ByVal Target As Range)
On Error Resume Next
If Target.Address = "F1" Then
Application.EnableEvents = False
Select Case Target
Case "150"
Rows("13").EntireRow.Hidden = False
Rows("14:19").EntireRow.Hidden = True
Case "330"
Rows("14").EntireRow.Hidden = False
Rows("13").EntireRow.Hidden = True
Rows("15:19").EntireRow.Hidden = True
Case "340"
Rows("15:19").EntireRow.Hidden = False
Rows("13:14").EntireRow.Hidden = True
Case Else
Rows("13:19").EntireRow.Hidden = True
End Select
Application.EnableEvents = True
End If
End Sub
i try with what limited knowledge i have, if you dont mind take a look at the code below, i read your article and added the appropriate line, the code works fine except the msgbox has to be ok'd twice before it exits sub any ideas why?
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
Dim rng As Range
Dim MyCell
Set rng = Range("A2:A100")
If Not Intersect(Target, rng) Is Nothing Then
With rng
For Each MyCell In rng
If MyCell = "" Then
MyCell.Select
MsgBox "Please use this next blank cell"
Exit Sub
End If
Next
End With
End If
End Sub
I have a spreadsheet with a table of values in range E5 to T158.
A macro populates the table by looking up values on other sheets in the book. If the macro finds a value in the lookup for Row 7 of any column (ie E7,F7...T7) it populates the rest of the column with that value (E7 value gets pasted to E8:E158) THEN it protects the cells it pasted (E8:E158).
If the macro does NOT find a value for row 7, it simply skips it, leaving it blank, and continues to row 8 until it reaches row 158 of each column E to T.
I want to give the user flexibility with these values. So if the user either deletes E7 or changes the value of the contents in E7, I want to unprotect the cells of rows 8 to 158 for that column.
I have created a
Private Sub Worksheet_Change(ByVal Target As Range)
in the private module for that sheet below. I thought it was working but it isn't doing anything when I change or delete the value in Cell E7 for example. Please help!
Private Sub Worksheet_Change(ByVal Target As Range)
'Do nothing if more than one cell is changed
If Target.Cells.count > 1 Then Exit Sub 'Or IsEmpty(Target)
I ran this code last week and it worked great, but today it doesn't work at all. I have even deleted it, closed Excel and and started fresh. Is there some small thing I'm missing (like hopping on my left foot while entering a code) ...
View 7 Replies View Relatedbutton on main workbook opens 2 other workbooks and assigns a workbook object to them. the 2 opened workbooks are Activated in turn, range values changed and macros on these sheets invoked and results captured and pasted back onto the starter workbook. the macro is within a sub in a module as are the ones in the second workbook. An example of the code used is:
Application.ScreenUpdating = True
Application.EnableEvents = True
Application.Calculation = xlCalculationAutomatic
Dim wkbTest As Workbook
Set wkbTest = Workbooks("Test.xls")
wkbTest.Activate
Sheets("G").Activate
Range("Today").Value = Format(Now(), "dd-mmm-yy")
Application.Run "'" & wkbTest.Name & "'" & "!TestMacro" ............