Change Event For Conditional Formatting Not Firing On Formula Calculations

Sep 25, 2007

I have used the code for formatting: http://www.ozgrid.com/VBA/excel-cond...ting-limit.htm. This works fine when typing in the numbers manualy but if I have a formula (eg:A1=b1+c1) and a1 = 15 nothing happens. Is there an update button or a better way to do this?

View 2 Replies


ADVERTISEMENT

Worksheet Change Event Not Firing

Aug 22, 2007

I have a spreadsheet with a table of values in range E5 to T158.

A macro populates the table by looking up values on other sheets in the book. If the macro finds a value in the lookup for Row 7 of any column (ie E7,F7...T7) it populates the rest of the column with that value (E7 value gets pasted to E8:E158) THEN it protects the cells it pasted (E8:E158).

If the macro does NOT find a value for row 7, it simply skips it, leaving it blank, and continues to row 8 until it reaches row 158 of each column E to T.

I want to give the user flexibility with these values. So if the user either deletes E7 or changes the value of the contents in E7, I want to unprotect the cells of rows 8 to 158 for that column.

I have created a

Private Sub Worksheet_Change(ByVal Target As Range)

in the private module for that sheet below. I thought it was working but it isn't doing anything when I change or delete the value in Cell E7 for example. Please help!

Private Sub Worksheet_Change(ByVal Target As Range)

'Do nothing if more than one cell is changed
If Target.Cells.count > 1 Then Exit Sub 'Or IsEmpty(Target)

View 5 Replies View Related

Change Event Code Not Firing

Sep 27, 2007

I ran this code last week and it worked great, but today it doesn't work at all. I have even deleted it, closed Excel and and started fresh. Is there some small thing I'm missing (like hopping on my left foot while entering a code) ...

View 7 Replies View Related

Stop Controls Change Event Firing

Nov 6, 2006

I want to be able to reset the value in a combobox, but without the combobox executing code, when it resets. Is there any way of doing this?

I have tried the code below but the ComboBox still executes when its value is changed.

Sub Reset_combobox()
Worksheets("Sheet1").ComboBox1.Enabled = False
Worksheets("Sheet1").ComboBox1.Value = 1
Worksheets("Sheet1").ComboBox1.Enabled = True
End Sub

The workbook containing the above is attached.

View 7 Replies View Related

Change Event: Not Firing From Cell Changed By ComboBox

Dec 4, 2006

Private Sub Worksheet_Change(ByVal Target As Range)
With Target.Cells(1, 1)
If Not Intersect(.Cells, Range("b3:b6")) Is Nothing Then
Range("b7") = "Not Found"
For i = 3 To 6: txt = txt & Cells(i, "b").Value & "_": Next
For Each r In Range("m3", Cells(3, Columns.Count).End(xlToLeft))
For i = 0 To 3: txt2 = txt2 & r.Offset(i).Value & "_": Next
If txt = txt2 Then
Range("b7").Value = r.Offset(4).Value
Exit For
End If
txt2 = ""
Next
ElseIf Not Intersect(.Cells, Range("b16:b19")) Is Nothing Then
Range("b20") = "Not Found".....................

I'm working with this code right now. The problem is the macro will only work if i type the numbers manually. if the values are retrieved from a combobox, the code above down not work as it cannot read the values.

View 9 Replies View Related

Stop Selection Change Event Firing When More Than 1 Cell

Oct 12, 2007

I've set up code where when a cell within a specified range of cells is selected, a macro will run. This works all well and good except for when a whole row, column or range containing the defined cells is selected, there is a run time error. There is no situation where I want multiple cells selected to run the macro, so I only want to run the macro when only a single cell within that range is selected.

Private Sub Worksheet_SelectionChange(ByVal Target As Range)
If Not Intersect(Target, Range("GoToRange")) Is Nothing Then
Application.Run "'Macro Test Current MY PFEP Metrics.xls'!PFEP_Filter"
End If

If Not Intersect(Target, Range("GoToRange2")) Is Nothing Then
Application.Run "'Macro Test Current MY PFEP Metrics.xls'!PFEP_Filter"
End If
End Sub

The ranges defined are non-contigious ranges.

View 3 Replies View Related

Conditional Formatting: VBA & Worksheet Change Event

Sep 1, 2006

I am trying to do a conditional format of 0 to 2 is red, 3 to 4 is yellow and 5 is green. However I also need to have a cell that is blank to remain white and this is the part I am having problems with.

I found the following code since I cannot use the standard conditional formating in excel since it needs 4 conditions.

Private Sub Worksheet_Change(ByVal Target As Range)
Dim icolor As Integer

If Not Intersect(Target, Range("H3:H12")) Is Nothing Then
Select Case Target
Case 0 To 2
icolor = 3
Case 3 To 4
icolor = 6
Case 5

View 7 Replies View Related

Run-time Error 1004 Upon Paste Firing Change Event

Nov 1, 2006

When I paste data in Sheet2 in the attached CF Example2 file (Just by Selecting A1:L18 Cutting it and Pasting in the same place), the action of the VBA code in the Thisworkbook is correct but I am getting the 1004 Error Message from the VBA debugger saying "Run-time Error '1004': Application-defined or object-defined error

View 2 Replies View Related

Conditional Formatting With Date Calculations?

Sep 30, 2013

I have two date columns named "start_date" and "Dead_line".

Both the columns are in the date format. Ex: 9/14/13 9:14 AM

i want the third column to be the "status" column.

if sysdate-dead_line < 30 % of (dead_line - start_date), then the status column should become green. if sysdate-dead_line is between 30 % and 70 % of (dead_line - start_date), then the status column should become amber. if sysdate-dead_line > 70% of (dead_line - start_date), then the status column should become red.

First the dead_line - start_date to be converted to hours, then have to do conditional formatting like mentioned above.

View 2 Replies View Related

Worksheet_Change Event Not Firing

Nov 2, 2008

Bit of an odd one, but I'm sure it's probably happened before to others. I've just been sent a worksheet to redesign (an audit template) one which I'll be making use of data validation lists (Yes, No, N/A) a fair bit.

What I want to happen is that when the user selects from a list, I'll fire a Worksheet_Change event, which will then run some background calculations to set up the next questions, etc. Problem is, the event isn't firing at all. I'm using the following to test the event...

View 2 Replies View Related

Worksheet_Change Event Not Firing ...

Jan 16, 2008

I wrote a simple script to show/hide certain rows based on the value of a certain cell on my worksheet (cell value chosen by drop down). When I left work last night, everything worked fine. When I returned this morning, the change event no longer appears to be firing. I'm quite certain no one else accessed the file to change the coding, so my only guesses are 1)perhaps some sort of system update was applied in the middle of the night and it messed with something or 2) aliens have blocked our technology in advance of their invasion.


Private Sub Worksheet_Change(ByVal Target As Range)
On Error Resume Next

If Target.Address = "F1" Then

Application.EnableEvents = False

Select Case Target
Case "150"
Rows("13").EntireRow.Hidden = False
Rows("14:19").EntireRow.Hidden = True
Case "330"
Rows("14").EntireRow.Hidden = False
Rows("13").EntireRow.Hidden = True
Rows("15:19").EntireRow.Hidden = True
Case "340"
Rows("15:19").EntireRow.Hidden = False
Rows("13:14").EntireRow.Hidden = True
Case Else
Rows("13:19").EntireRow.Hidden = True
End Select

Application.EnableEvents = True

End If
End Sub

View 9 Replies View Related

Event Code Firing More Than Once

Nov 2, 2006

i try with what limited knowledge i have, if you dont mind take a look at the code below, i read your article and added the appropriate line, the code works fine except the msgbox has to be ok'd twice before it exits sub any ideas why?

Private Sub Worksheet_SelectionChange(ByVal Target As Range)
Dim rng As Range
Dim MyCell
Set rng = Range("A2:A100")
If Not Intersect(Target, rng) Is Nothing Then
With rng
For Each MyCell In rng
If MyCell = "" Then
MyCell.Select
MsgBox "Please use this next blank cell"
Exit Sub

End If
Next
End With
End If
End Sub

View 2 Replies View Related

Workbook Activate Event Not Firing

Mar 19, 2008

button on main workbook opens 2 other workbooks and assigns a workbook object to them. the 2 opened workbooks are Activated in turn, range values changed and macros on these sheets invoked and results captured and pasted back onto the starter workbook. the macro is within a sub in a module as are the ones in the second workbook. An example of the code used is:

Application.ScreenUpdating = True
Application.EnableEvents = True
Application.Calculation = xlCalculationAutomatic

Dim wkbTest As Workbook
Set wkbTest = Workbooks("Test.xls")
wkbTest.Activate
Sheets("G").Activate
Range("Today").Value = Format(Now(), "dd-mmm-yy")
Application.Run "'" & wkbTest.Name & "'" & "!TestMacro" ............

View 5 Replies View Related

Prevent VBA Macro Firing Event Code

Nov 23, 2009

I'd like to know if there is a change event that only occurs when a target cell is changed by the user, but does not occur when i'ts changed by a macro. nfortunately, the Worksheet_Change event occurs in both cases.

View 2 Replies View Related

Prevent Control Event Procedures Firing

Apr 27, 2008

I have CheckBox1 (.Value = FALSE) on the UserForm and when I run my sript ... this change Value to TRUE and run the subrutine Private Sub CheckBox1_Click. I need block this step with using VBA code.

View 4 Replies View Related

Sheet & Workbook Event Code Not Firing

Jun 27, 2008

why this code does not work when the worksheet is changed between range "B1:F5"?

Private Sub Worksheet_Change(ByVal Target As Range)

If Not Intersect(Target, Range("B1:F5")) Is Nothing Then
With Range("B1:F5")
Cells(Target.Row, 7) = Cells(Target.Row, 6).Value + Cells(Target.Row, 5).Value
End With
End If
End Sub

View 3 Replies View Related

Conditional Formatting Code In Calculate Event

Dec 11, 2006

I have found this code while searching. I would like to know how to call the vba code only when clicking the button. On much bigger projects Excel has to re-calculate all cells everytime i change a cell value.

View 3 Replies View Related

Cell Formatting On Worksheet Change Event

Nov 22, 2011

I'm trying to create a worksheet change event macro that will change the colour of the cell when you update the value in that cell.

I have column C with 140 rows and when one of the cells in the column is changed by the user, I need the same cell to highlight in yellow. The highlight would then be removed once the user has acted on the change in the value, and that'll be done in another macro.

I understand I need a worksheet change event macro in the specific sheet and need the following code for yellow:

Code:
.Interior.Color = RGB(255,255,0)

, but any further I get stuck as it involves 'target addresses'

View 2 Replies View Related

Excel 2010 :: Control ENTER And EXIT Event Firing With Frames Active?

Oct 22, 2011

I'm having some trouble getting control ENTER & EXIT events to fire properly when having controls embedded on frames within a userform. I'm using Excel 2003, 2007, & 2010. Here's the userforms I'm working with:

With FRAME:

Without FRAME:

In both cases, the DESCRIPTION field is disabled. The selectable controls on both are a combo-box, textbox, listbox, & 2 buttons. On the FRAMED version, the combo-box & textbox are contained on a FRAME.

Here's the code, same on both userforms:

Code:
Option Explicit
Private Sub cmbRecipes_Enter()
ListBox1.AddItem "ENTER - " & cmbRecipes.Value
End Sub
Private Sub cmbRecipes_Exit(ByVal Cancel As MSForms.ReturnBoolean)
ListBox1.AddItem "EXIT - " & cmbRecipes.Value
End Sub

All this is doing is posting a message to the listbox when the combo-box ENTER & EXIT events fire. This works as expected without the FRAME, ENTER is shown when the combo-box is entered and EXIT is shown as focus is moved to another control. But when running it on the FRAMED version all I get is a single ENTER event recorded regardless of how I move the focus through the control set.

Another oddity is that if I have more than 1 control that can receive focus on the FRAMED version, it appears to work correctly.

View 6 Replies View Related

Condiditional Formatting - Out Of Stack Space - In Change Event Code

Oct 21, 2008

the code i have got is attached below but the problem i am having is when i enter the letter "H" which is calculated in AJ and i enter it fast it comes up with the error "Out Of Stack Space error 28". AJ in the code below is where the cumlative value is stored, and AI is the value that it is measured against it AJ is greater than AI the message is displayed.

Private Sub Worksheet_Change(ByVal Target As Range)
Dim rRow As Range
Dim icolor As Integer
Dim ifont As Integer
With Application
.CellDragAndDrop = False
.CutCopyMode = False
End With
If Intersect(Target, Me.Range("TABLE1")) Is Nothing Then Exit Sub
Me.Calculate
For Each rRow In Target.Rows
If Me.Cells(rRow.Row, "AJ") > Me.Cells(rRow.Row, "AI") Then
rRow.ClearContents
MsgBox "No Holidays Left or No Holidays setup Against Them " & Me.Cells(rRow.Row, "AI") & " days."............................

View 9 Replies View Related

Worksheet Change Event Triggered By Formula Change?

Dec 6, 2011

Basically the situation I have is Sheet2 has many references to cells in Sheet1. Sheet2 is for all intents and purposes a kind of nicely formatted report form, and Sheet1 is the input form.

My ultimate goal is to automatically resize row heights on Sheet2 when cell contents change on Sheet2.

Using a worksheet_change event isn't working I presume because it doesn't see the formula output change as a worksheet change, the worksheet_change is firing only when the input is changed in Sheet1.

how can I capture these formula output changes on Sheet2 (triggered from input on Sheet1) OR is there a way of making a particular sheets rows always adjust in height to best fit?

View 5 Replies View Related

Change All Conditional Formatting At Once

Jul 31, 2007

I have a sheet with a fairly large amount of conditional formatting (all the same format, different conditions).

I would like to quickly change all of the (conditional) formats, but leave the conditions as is.

View 9 Replies View Related

Stop Print Macro Firing Before Print Event

Oct 18, 2006

I have a "submit" button macro which user would click after he has finished his input. This macro would update a reference number on the worksheet named "orange" and then print out this worksheet.

My purpose is "orange" is printed out with a reference number.

Below is the 1st code.....

View 9 Replies View Related

Stop Code Firing On Selection Change

Nov 22, 2006

how I can disable an InputBox? I've got some code that whenever someone selects a cell in a specified range, an input box pops up (running a macro) - this can get annoying sometimes though if just browsing. Does anyone know a macro where I can "disable" this?

View 4 Replies View Related

Conditional Formatting: Change Colour

Feb 16, 2010

In cell A1 I have revenue projected & B1 I have actual revenue if the date in B1 is less than the date in A1, I would like B1 to change colour.

View 5 Replies View Related

Conditional Formatting Value Change Of Same Cell

Apr 22, 2013

I have a spreadsheet of stock data open, high, low, close etc., that streams in real time from thompson reuters. i am trying to conditionally format the G column which is the "(HIGH)" price of the day to alert me when the value of that cell changes price. Basically during the first 15 min of trading my software filters down the top performing stocks of the day. During that time i drag and drop the information in the excel program that is linked to the stock quotes program which might give me up to 30 or 40 stocks. The conditional formatting is to alert me after the 15 min mark if the "(HIGH)" value in that column has changed price to a new high. I can control the stream of the data with a button that turns off the data stream so that it only goes live after 15 min.

photo (1).jpg

View 5 Replies View Related

Conditional Formatting: Change The Colour..

Oct 18, 2007

=$CS18=INDIRECT("Client_Options!"&ADDRESS($I18,97))

I want to say when CS2= same value as CS2 on the client options sheet (on the row specified in I2 sheet 1) change the colour.

How should this be tweaked to do that? I'm not getting it!

=$CS2=INDIRECT("Client_Options!"&ADDRESS($I2,COLUMN()))

View 2 Replies View Related

Whole Row Color Change - Conditional Formatting

May 25, 2007

I'm trying to make a tracking sheet of upcoming annual inspections for different pieces of equipment. I've already got a column set up listing the inspection due date. Using three conditional formats, the individual cells change color based on the amount of time until the inspection is due (green normally, yellow at 30 days out, red past due).

What I'd like to do is have the entire row of information change color based on the color of the cell the inpection due date is listed in. For ex. J6 lists the inspection date as 24-Feb-07 and is therefore red, I'd like A6-I6 and K6-P6 to change to red as well. And when the inspection is compleate and I manually change J6 to say 25-May-07, I'd like all of row 6 to change green based on the fact that J6 is already going to.

View 5 Replies View Related

Worksheet Change Not Firing When Pasting To Multiple Cells

Mar 17, 2014

The code below will put "Some text" into column B when data is pasted into column D. This only works when copying data into one cell. If I copy into multiple cells of column D then the code does not run at all.

[Code] ......

View 4 Replies View Related

Worksheet Change Event Where Target Cell Contains Formula

May 23, 2007

I need to hide/unhide a couple of rows based on the result of a formula in the Target Range. Basically, Cell D2 contains the results of a sum (a+ B), if this is greater than 10,000, unhide the next row.

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved