Procedure / Macro To Run Automatically Every Hour?

Apr 11, 2003

VBA - I want to run a set of statements every hour on the hour for the lifetime of the workbook being open

View 4 Replies


ADVERTISEMENT

Automatically Show Every Hour

Dec 5, 2006

What other code than that shown below do i need to make my message box work,

"Module Code"
Sub MyMacro()

Application .OnTime TimeValue("00:00:00"), "MyMacro", ["23:00:00],
[TimeValue "01:00:00"=True]
MsgBox(BoMLogDue, vbOKOnly, BoMLogDue) As VbMsgBoxStyle

End Sub

"Workbook Code"
Private Sub Workbook_Open()
Application.OnTime TimeValue("00:00:00"), "MyMacro", ["23:00:00],
[TimeValue "01:00:00"=True]
End Sub

View 5 Replies View Related

Automatically Refresh A Sheet Every Hour

Aug 20, 2007

I have a workseet that is basically a massive list of orders that have been placed. I have some conditional formatting based on cells that use the today() function to work out how long (in days) since the order was placed.

Trouble is, the spreadsheet is always open, and is never closed down... so it does not refresh automatically. So orders that should go red to indicate a week since they've been placed, don't!

I don't want to rely on people refreshing the screen. Ideally, I would like it to refresh once a day at 1 minute past midnight, or even every hour...

View 9 Replies View Related

Automatically Changing Color Of Cell Within Half An Hour Of Inputting

Jan 9, 2013

I want to create a macro or formula for changing the colour of the cell after half an hour of inputting.

View 3 Replies View Related

Changing Date/time To Run A 12 Hour Production Schedule, And Not 24 Hour

Sep 4, 2006

I have created a daily schedule which has a number of factory variables taken into consideration which determine the date and time a particular product should, barring any mechanical problems, come off the machine. (see attached spreadsheet).

The date at the top will be editable by me only so that when I update the production quantities, the “date/time off” column automatically re-adjusts to the remaining quantities.

The formulas are a little long winded, but I have left them that way whilst I try and develop it. I should be able to figure out how to condense them later.

My problem is that the “date/time off” on the right works excellent, but over a 24 hr period.

Ordinarily, we work a 12 hour day (6am to 6pm) with overlapping shifts to cover breaks, and 20 mins warm up at the start of the day for the machine, thus maximising a 12 hour day.

Of course if demand exceeds the allotted time we put on overtime.

Is it possible to specify that normal days are only 12 hours so that if a product exceeds 6pm, it flows into the next day with the balance starting at 6:20am?

And, if the production for the week exceeds the time could I stipulate particular days which we deem are suitable for overtime? Ie, we decide Wednesday is a 14 hour day and not 12.

I had toyed with the idea of creating a 365 day table/calendar, on another worksheet which would have its individual allocated hours in an adjacent column and somehow link them to the date/time off, perhaps by way of a VLOOKUP, but I have been chasing my tail trying to figure out how to implement it.

View 9 Replies View Related

Excel 2010 :: Counting Users Per Hour For Each Hour

Oct 21, 2013

I work in a computer lab and we have to keep track of how many people sign in (using excel 2010), and how long they were here.

I'm looking for a way to count how many entries were made per hour for every hour someone was signed in.

For example someone signs in at 9:22 am and leaves at 3:34 pm.They were here from 9-10, 10-11, 11-12 etc.. and its getting very tiresome to go through and manually enter a "1" for each individual hour in each cell under the hour.

Is there a way I can feed the in and out times into a spreadsheet and have it automatically count how many people were in the lab each hour?

A
B
C
D
E

1
2
4
2

2
In
Out
8 am
9 am
10 am

[Code] ...........

View 3 Replies View Related

Formula To Convert 24 Hour Day To 8 Hour (working) Day?

Nov 12, 2013

Is it possible to take data in format dd:hh:mm and convert to working days - ie. 8 hour days?

For example:

02:12:15 (60 hours and 15 minutes .. or 3615 minutes)

to be converted to:

07:04:15 (7 working days: 4 hours: 15 minutes)

View 3 Replies View Related

Distribute Hours To A New Table Hour By Hour?

Dec 2, 2013

I have a time table which some hours are 3 hours time period. I want to distribute to new table hour by hour this kind of hours, or hour to same hour period.

Attached file, defined example and detail.

View 1 Replies View Related

How To Get A Macro To Run Exactly On The Hour And Day

Dec 4, 2006

I do not understand how to get a macro to run exactly on the hour, each hour of a day, day after day?

View 9 Replies View Related

Run Macro Every Hour

Aug 7, 2008

I have a macro I need to run every hour. I have tried 3 different macros that seem to work the first few times but then the code executes and will run 2 or more times.

Application.OnTime ("01:00:01"), "macro1"

Application.OnTime Date+TimeValue("07:05:00"), "macro1"

I then tried this http://www.cpearson.com/excel/OnTime.aspx

View 5 Replies View Related

Run VBA Macro From Another Procedure

Sep 2, 2009

I have the following macros,but want them to run in sequence but i don't know how.
I plus won't another macro to save the archive as .txt

1. I use the following macro to open .txts so the cells go where i want to

Sub NewTextImport()
myfile = Application. GetOpenFilename("Text Files,*.txt")
Workbooks.OpenText Filename:=myfile _
, Origin:=1253, StartRow:=1, DataType:=xlFixedWidth, FieldInfo:= Array( _
Array(0, 2), Array(17, 2), Array(34, 2), Array(56, 2), Array(102, 1)), _
TrailingMinusNumbers:=True
Columns("A:A").EntireColumn.AutoFit
Columns("B:B").EntireColumn.AutoFit
Columns("C:C").EntireColumn.AutoFit
Columns("D:D").EntireColumn.AutoFit
End Sub

2.Remove the unwanted zeros from Column E.............

View 2 Replies View Related

Run Macro / Procedure In Another Workbook?

Feb 28, 2006

When i open the MS-excell and i go to see the VBeditor i can see the following in the project window:

- spacereport(space.xla)
-microsoft excel objects
sheet1

[Code].....

All the code in spacereport project, let me go to File-->Space and then run a report previously added. what i would like to do is, being in the book3 project, execute modules and forms from spacereport project.

View 6 Replies View Related

Macro - Procedure Too Large

Oct 15, 2008

I am using following event macro and it repeats itself more than 300 times. I am at a stage where I am getting a message "Compile Error, Procedure too large", I tried to break it into two but that's not working.

Option Explicit
Option Compare Text
Private Sub Worksheet_Change(ByVal Target As Range)
Dim cl As Range
Dim lng As Long
Application.EnableEvents = False

Select Case Target.Address
Case "$E$3"
If Target.Value = "Yes" Then
SelectNumber:
lng = Application.InputBox("Please enter number 0 to 100", , , , , , , 1)
If IsNumeric(lng) = False Or lng < 0 Or lng > 100 Then GoTo SelectNumber
Range("G3") = lng
Else: Range("G3") = 0

.................................................(above statements repeat more than 300 times for different cells)..............................
Application.EnableEvents = True
End Sub

View 15 Replies View Related

Excel 2010 :: VBA Script To Run A Macro On The Every Hour?

Jul 11, 2014

writing a VBA script that will execute a refresh macro every hour on the hour.

Using Excel 2010

View 4 Replies View Related

Macro Error: Invalid Outside Procedure

Feb 18, 2008

I'm adding a new macro and getting the error message Compile Error:Invalid outside procedure. I'm using the following code

Dim wSheet As Worksheet
Dim vFound
On Error Resume Next
For Each wSheet In ActiveWorkbook.Worksheets
With wSheet
Set Tble_Array = .Range(Tble_Array.Address)
vFound = WorksheetFunction.VLookup _
(Look_Value, Tble_Array, _
Col_num, Range_look)
End With
If Not IsEmpty(vFound) Then Exit For
Next wSheet
Set Tble_Array = Nothing
VLOOKAllSheets = vFound
End Function

View 9 Replies View Related

Macro Error: Procedure Too Large

Mar 16, 2008

Auto Merged Post Until 24 Hrs Passes; Auto Merged Post Until 24 Hrs Passes; Auto Merged Post Until 24 Hrs Passes;

View 9 Replies View Related

Get Macro Code Procedure Text

May 29, 2008

I there a way to get a text of the user defined VBA function. Smth like Application.Function("MyFunc").Body.Text;

View 7 Replies View Related

Restart Macro Sub Procedure From Beginning

Jun 26, 2008

When I run the following code, if "If exists = True" then I want the routine to start again at the very beginning. Currently, 'as is' it re-starts at the beginning but enters a loop on itself; I understand why this is but it's not what I want but can't get round this! How do I make the "If exists = True" condition (if true) restart the routine - ie call AllNEWActions() without then going into a loop on itself? NB: I can't use "Exit Sub" (see it commented out) as I don't want to exit routine, just restart it.

Sub AllNEWActions()
ShowCalendar
GetDateFromCalendar
SheetAlreadyExists
If exists = True Then
boolRestart = True
AllNEWActions
' Exit Sub
Else
MsgBox (" Date selected/new sheet doesn't exist")
InsertNewSheet
End If
If boolRestart = False Then
ShowCalendar
GetDateFromCalendar
End If

MsgBox ("Do something ...)
End Sub

View 2 Replies View Related

Macro - Move Purchases Every Hour To Keep Track Of Employees

Jun 17, 2014

I have a spreadsheet that has two Columns.

Column (B) has names of flowers
Column (C) has price

I want to at the top of each hour have those two columns be moved to Col(D) and Col(E) . However if D and E are full I want them in F and G and so on. Essentially i want them to go to the closest empty column to the right.

How to do this automatically in a macro ?

This would allow me to keep track of my employees.

Also is there a way that I could automatically generate a graph of price vs. name for each hour when they are moved ?

View 10 Replies View Related

Compile Error Procedure Too Large When Trying To Run Macro

May 29, 2013

I am running into a Procedure too large error when running my macro. My macro is designed to replace a cell value with another cell value in a list. When the cell value is replaced a vlookup brings in new data to my workboook. Then the macro refreshes all the pivot tables and saves the workbork. I want my macro to repeat the above 60 times, so I have copied the code 60 times and changed the ActiveCell.FormulaR1C1 to point to the next value in my list. (Is there another way to select the next value from the list without changing the Row and Column number?) This is where my macro fails.

Below is my code.

VB:
Sheets("Data").Select
Range("B2").Select
[COLOR=#FF0000] ActiveCell.FormulaR1C1 = "=RC[25]" ' AGC GRP_ID[/COLOR]
Sheets("Ship pivot and cum triangle").Select
ActiveSheet.PivotTables("PivotTable4").RefreshTable
Application.DisplayAlerts = False

[Code] .....

View 9 Replies View Related

Macro Calls A Unwanted Procedure During Runtime

Jan 14, 2010

I have a VBA application in Excel.
In a certain time, when the code is executed in the


Private Sub CB_ValidaHoras_Click()

View 11 Replies View Related

Run Macro Procedure From UserForm Command Button

Mar 14, 2008

I have constructed a Userform with two button options - Run a Sub that I have already written and runs fine, the other to close the userform.

how to correctly assign the completed macro ( Name: "Run_Report") to the button click action. The code below is what I have, but it does not run:

' This is the run macro code
Private Sub CommandButton1_Click()
Run_Report
End Sub

' This is the quit UserForm code
Private Sub CommandButton2_Click()
Unload Me
End Sub

The quit command works, just not the run macro - do I need quote marks, parenthesis, or a .Run command or something?

View 5 Replies View Related

Run Macro Procedure Based On Drop-Down Choice

May 15, 2008

I have a worksheet with 7 macros each run from a seperate button. I would like to tidy up the sheet by having a combo box containing a description of each macro and one button to run the macro currently shown in the box.

View 4 Replies View Related

Run Macro Procedure Based On Drop-Down Item Selected

May 27, 2009

I am trying to accomplish is to display a dropdown or combobox with a list of choices. I want the backcolor to be shaded light green to match instructional text that appears in the cell above. That I have working with the selections appearing. Once a choice is made I want a separate procedure to run that will somehow know which choice was made.

I can't put the code within the module for this particular sheet as it is dynamically recreated each time the data is refreshed and the code will disappear. This may seem to be an odd practice but this is how 25+ workbooks are coded within this system for my employer's customer and it is a required practice.

View 9 Replies View Related

Display Progress Of Macro Procedure & Interrupt Code

Feb 26, 2008

I have a program that screen scrapes data fom a mainframe emulation program. There are many loops used in order to slow the program down checking for things to load before taking the information. I would like to build some kind of display showing the user what the program is doing and allow them to stop the program if they like. Right now while the program is running everything is frozen and unresponsive.

View 3 Replies View Related

Compile Error: Invalid Outside Procedure (execute Macro On Pivot Refresh)

Jan 27, 2009

I keep getting this error:

"Compile Error: Invalid outside procedure"

What I am doing is having a macro execute every time my Pivot table is refreshed, the macro invokes a format change.

View 3 Replies View Related

Recorded A Function And Got The Message Box "Invalid Outside Procedure" When I Tried To Run The Macro

Jul 28, 2006

I recorded a function and got the message box "Invalid Outside Procedure" when I tried to run the macro. I don't understand what it means or how to prevent it.

View 2 Replies View Related

Round To Nearest 15 Then Nearest Hour If Less Than 1 Hour

Apr 4, 2014

I have a form to round to nearest quarter but if it is less than 1 hour I need it to round to a total of 1. Can this be combined in one formula.

I also need my time to be configured so that if the start time is a PM number then end time AM it does not figure right. is there a way to remove the AM/PM from time. I have already tried all the formats from number,time, & custom.

Attached is my form : Timesheet Form 2014.xlsx

View 4 Replies View Related

Convert To 12-hour Time From 24-hour Time

Mar 7, 2008

I'd like to convert from 24 hour standard time to 12 hour time using VBA code. For example: instead of 13:00 I need 1:00.

View 9 Replies View Related

CONVERT 24-Hour Time To 12-Hour Time

May 8, 2008

I have a list of FLIGHT departure times that are listed in MIL TIME, however, there is no : in the format. Its just 4 or 3 digit numbers. I need to convert these to time in 12-hour clock. If I go to FORMAT/CELL/TIME and select 1:30pm it simply makes the time ZERO!

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved