Restart Macro Sub Procedure From Beginning
Jun 26, 2008
When I run the following code, if "If exists = True" then I want the routine to start again at the very beginning. Currently, 'as is' it re-starts at the beginning but enters a loop on itself; I understand why this is but it's not what I want but can't get round this! How do I make the "If exists = True" condition (if true) restart the routine - ie call AllNEWActions() without then going into a loop on itself? NB: I can't use "Exit Sub" (see it commented out) as I don't want to exit routine, just restart it.
Sub AllNEWActions()
ShowCalendar
GetDateFromCalendar
SheetAlreadyExists
If exists = True Then
boolRestart = True
AllNEWActions
' Exit Sub
Else
MsgBox (" Date selected/new sheet doesn't exist")
InsertNewSheet
End If
If boolRestart = False Then
ShowCalendar
GetDateFromCalendar
End If
MsgBox ("Do something ...)
End Sub
View 2 Replies
ADVERTISEMENT
Dec 18, 2007
I am trying to pause a macro on a protected sheet, select 2 adjacent cells (initially protected), utilize an existing drop down box to select a name from the list, copy the name from the list into the range of cells, then re-start the macro.
I had no problem when there was just one name (see John Smith below). I tried to use the InputBox command but needed to actually type in the name.
ActiveSheet.Unprotect
Range("C27:D27").Select
'ActiveCell.FormulaR1C1 = "John Smith"
' Application.CutCopyMode = False
' ActiveSheet.Paste
'Range("c27:d27") = InputBox("Enter value")
View 4 Replies
View Related
Mar 19, 2014
I've written a macro for work that will work with our billing process. After part of it has run, I'd like to pause it for the user to check a column for errors and possibly update a table to get rid of those errors, then after those errors are fixed, have the ability to continue with the rest of the code. I tried to make a message box to remind the user to look for the errors, but it wouldn't allow me to click anywhere except for on the buttons.
View 4 Replies
View Related
Jan 20, 2010
I've got a series of macros in place which, essentially, download several CSV files into a temp directory, then opens each and copies the data into a single workbook (one sheet).
What happens is that the some number of the sheets don't actually open until the macro stops. I've tried using the wait (Application.Wait Now + TimeValue("00:00:10")) and sleep functions, but it's not quite doing what I want.
What I'd LIKE to do is have the macro actually STOP processing for 10 seconds, then proceed (or start a new macro).
I've also tried putting the wait behind a button in a userform, which is non modal... the csv files open until the user clicks the button.
View 9 Replies
View Related
Aug 15, 2013
Is it possible to write a code that will automatically restart a PC when a STRING in CELL A1 is recognized? My cell A1 populates a user's USERNAME upon opening the workbook.
View 9 Replies
View Related
Feb 10, 2010
Is it possible to restart a Windows Service with execution from a VBA Macro?
When you go into Windows Computer Management you can see a list of services. You can click a hyperlink to start, pause or restart.
View 9 Replies
View Related
Jun 25, 2008
I have a macro that runs when the workbook opens. At the end of my macro I've added a Yes/No box. If 'No' the workbook closes without saving. If 'Yes' I would like to restart the macro. I can close it ok, but I don't know how to restart the macro from line 1 when 'Yes' is selected. Here is what I have:
YesNo = MsgBox("Done! Would you like to run again?", vbYesNo + vbCritical, "Caution")
Select Case YesNo
Case vbYes
'I don't know what to put here :(
Case vbNo
ActiveWorkbook.Close savechanges:=False
End Select
View 3 Replies
View Related
Mar 17, 2014
I have the code below to add my new sheet and give it todays date (coming from the menu sheet). However I can not figure out how to add the before code so it will save the new sheet at the beginning of all of the sheets every time.
[Code] .....
View 7 Replies
View Related
Sep 17, 2008
I guess this is a simple one but I am not sure of the best way to do it,
I have number of points recorded for everyday in an excel sheet where first column represents date, second column represents group third column represents line and fourth column represents point as shown in the example below
3 19 2222 4324
2223 4325
2224 4326
2225 4327
2226 4328
"3" and "4" represent the 3rd and 4th day of the month, "19" represents the group and 3rd and 4th columns rest are line and point numbers recorded (2222 is first line of day 3, group 19 and 4324 is first point of line 2222 of group 19 on 3rd day and so on....).
I need a macro (or formula) to copy the cells of the last day written in the sheet up to the last row to a new excel sheet, reformat them so that first column has the word "Date" in its first cell, second column has the word "group" third has "line" and fourth has point.
so in the example mentioned here I need it to copy the cells of day "4" including the group, line and point numbers and format them in the new sheet so that first column has "DATE" then 4 for the rest of the rows, second column has "group" and 19 in the rest of the rows, 3rd column has "Line" and all line copied up to last row, 4th column contains "point" and all points copied.
View 9 Replies
View Related
Jul 21, 2014
I have a macro that takes the column of data from D on Sheet 1, pastes it into A on Sheet 3, gets rid of duplicates and then, in B1, combines all the numbers from A into a comma-separated string. The only problem is that it puts a comma at the beginning of the string. Is there something I can do to make that first comma not be there?
View 5 Replies
View Related
Sep 2, 2009
I have the following macros,but want them to run in sequence but i don't know how.
I plus won't another macro to save the archive as .txt
1. I use the following macro to open .txts so the cells go where i want to
Sub NewTextImport()
myfile = Application. GetOpenFilename("Text Files,*.txt")
Workbooks.OpenText Filename:=myfile _
, Origin:=1253, StartRow:=1, DataType:=xlFixedWidth, FieldInfo:= Array( _
Array(0, 2), Array(17, 2), Array(34, 2), Array(56, 2), Array(102, 1)), _
TrailingMinusNumbers:=True
Columns("A:A").EntireColumn.AutoFit
Columns("B:B").EntireColumn.AutoFit
Columns("C:C").EntireColumn.AutoFit
Columns("D:D").EntireColumn.AutoFit
End Sub
2.Remove the unwanted zeros from Column E.............
View 2 Replies
View Related
Feb 28, 2006
When i open the MS-excell and i go to see the VBeditor i can see the following in the project window:
- spacereport(space.xla)
-microsoft excel objects
sheet1
[Code].....
All the code in spacereport project, let me go to File-->Space and then run a report previously added. what i would like to do is, being in the book3 project, execute modules and forms from spacereport project.
View 6 Replies
View Related
Oct 15, 2008
I am using following event macro and it repeats itself more than 300 times. I am at a stage where I am getting a message "Compile Error, Procedure too large", I tried to break it into two but that's not working.
Option Explicit
Option Compare Text
Private Sub Worksheet_Change(ByVal Target As Range)
Dim cl As Range
Dim lng As Long
Application.EnableEvents = False
Select Case Target.Address
Case "$E$3"
If Target.Value = "Yes" Then
SelectNumber:
lng = Application.InputBox("Please enter number 0 to 100", , , , , , , 1)
If IsNumeric(lng) = False Or lng < 0 Or lng > 100 Then GoTo SelectNumber
Range("G3") = lng
Else: Range("G3") = 0
.................................................(above statements repeat more than 300 times for different cells)..............................
Application.EnableEvents = True
End Sub
View 15 Replies
View Related
Apr 11, 2003
VBA - I want to run a set of statements every hour on the hour for the lifetime of the workbook being open
View 4 Replies
View Related
Feb 18, 2008
I'm adding a new macro and getting the error message Compile Error:Invalid outside procedure. I'm using the following code
Dim wSheet As Worksheet
Dim vFound
On Error Resume Next
For Each wSheet In ActiveWorkbook.Worksheets
With wSheet
Set Tble_Array = .Range(Tble_Array.Address)
vFound = WorksheetFunction.VLookup _
(Look_Value, Tble_Array, _
Col_num, Range_look)
End With
If Not IsEmpty(vFound) Then Exit For
Next wSheet
Set Tble_Array = Nothing
VLOOKAllSheets = vFound
End Function
View 9 Replies
View Related
Mar 16, 2008
Auto Merged Post Until 24 Hrs Passes; Auto Merged Post Until 24 Hrs Passes; Auto Merged Post Until 24 Hrs Passes;
View 9 Replies
View Related
May 29, 2008
I there a way to get a text of the user defined VBA function. Smth like Application.Function("MyFunc").Body.Text;
View 7 Replies
View Related
May 29, 2013
I am running into a Procedure too large error when running my macro. My macro is designed to replace a cell value with another cell value in a list. When the cell value is replaced a vlookup brings in new data to my workboook. Then the macro refreshes all the pivot tables and saves the workbork. I want my macro to repeat the above 60 times, so I have copied the code 60 times and changed the ActiveCell.FormulaR1C1 to point to the next value in my list. (Is there another way to select the next value from the list without changing the Row and Column number?) This is where my macro fails.
Below is my code.
VB:
Sheets("Data").Select
Range("B2").Select
[COLOR=#FF0000] ActiveCell.FormulaR1C1 = "=RC[25]" ' AGC GRP_ID[/COLOR]
Sheets("Ship pivot and cum triangle").Select
ActiveSheet.PivotTables("PivotTable4").RefreshTable
Application.DisplayAlerts = False
[Code] .....
View 9 Replies
View Related
Jan 14, 2010
I have a VBA application in Excel.
In a certain time, when the code is executed in the
Private Sub CB_ValidaHoras_Click()
View 11 Replies
View Related
Mar 14, 2008
I have constructed a Userform with two button options - Run a Sub that I have already written and runs fine, the other to close the userform.
how to correctly assign the completed macro ( Name: "Run_Report") to the button click action. The code below is what I have, but it does not run:
' This is the run macro code
Private Sub CommandButton1_Click()
Run_Report
End Sub
' This is the quit UserForm code
Private Sub CommandButton2_Click()
Unload Me
End Sub
The quit command works, just not the run macro - do I need quote marks, parenthesis, or a .Run command or something?
View 5 Replies
View Related
May 15, 2008
I have a worksheet with 7 macros each run from a seperate button. I would like to tidy up the sheet by having a combo box containing a description of each macro and one button to run the macro currently shown in the box.
View 4 Replies
View Related
May 27, 2009
I am trying to accomplish is to display a dropdown or combobox with a list of choices. I want the backcolor to be shaded light green to match instructional text that appears in the cell above. That I have working with the selections appearing. Once a choice is made I want a separate procedure to run that will somehow know which choice was made.
I can't put the code within the module for this particular sheet as it is dynamically recreated each time the data is refreshed and the code will disappear. This may seem to be an odd practice but this is how 25+ workbooks are coded within this system for my employer's customer and it is a required practice.
View 9 Replies
View Related
Feb 26, 2008
I have a program that screen scrapes data fom a mainframe emulation program. There are many loops used in order to slow the program down checking for things to load before taking the information. I would like to build some kind of display showing the user what the program is doing and allow them to stop the program if they like. Right now while the program is running everything is frozen and unresponsive.
View 3 Replies
View Related
Feb 17, 2010
In column A, I have many entries such as AA-1, AA-2, BB-1, BB-2, AA-3, etc.
How do you count the number of entries for only those beginning with "AA" or beginning with "BB"?
View 3 Replies
View Related
Aug 15, 2008
What can I do to have a sub only run when a random number is above a certain value? I have tried this:
Sub Filter()
With Application
Calculate
If Range("Count") >= 2 Then
Range("J8:O8").select
.Calculation = xlManual
Else: Application.Goto Filter
End If
End With
End Sub
Am i using goto incorrectly or should I try some sort of loop?
View 3 Replies
View Related
Apr 22, 2008
I have just successfully added a code to Visual Basic in order for it to insert a sequential number automatically upon opening the worksheet. It works great, but how do I restart the numbering now that I know it works?
View 9 Replies
View Related
Jan 27, 2009
I keep getting this error:
"Compile Error: Invalid outside procedure"
What I am doing is having a macro execute every time my Pivot table is refreshed, the macro invokes a format change.
View 3 Replies
View Related
Jun 17, 2013
I'm looking for a simple solution to pause a VBA loop and then restart it from where it stopped.
Is it with a boolean value, i dont know the code.
View 9 Replies
View Related
Jul 2, 2014
How do I run this loop 10 times ....Then using a timer or system clock to restart it.
Code:
Public Sub Workbook_Open()
Dim ws As Worksheet
Do
For Each ws In ThisWorkbook.Worksheets
[Code]....
View 1 Replies
View Related
Jul 28, 2006
I recorded a function and got the message box "Invalid Outside Procedure" when I tried to run the macro. I don't understand what it means or how to prevent it.
View 2 Replies
View Related