I'm doing a termination report at work and I need to create a pie chart based on data in a selected column. Ive never used excel charts before but I cant get the pie chart to display the information that I want.I created a sample workbook. Its very a simple column of data. I would like a pie chart based on the percentages of "yes" to "no". I havent been able to get it to work.
View 6 RepliesI have the following data :-
SHEET 1
COL A_______COL B________COL C
V1990_______J100_________U1212
H2323_______Y999
U2222
SHEET 2
COL A_______COL B________COL C
U2222
I0000_______U8900________T67888
H2323
I need to search data from range defined A1.C3 and if any data in that range found in the sheet 2 that having the same records.
Showed a line chart using 2 vertical axis where the first was a single line along the graph (ie. 42%) then the second data series was a single data point that was above or below the line which easily showed if the result lied above or below the threshold.
How to get a straight line across the body of the just to be used as the theshold line?
I have a worksheet entitled 'Data'. In this worksheet there is a table consisting of 4 columns plus relevant data:
TABLE 1:
Project
Benefit Type
Delivered or Enabled
Benefit
PJ1
Financial
Delivered
Saving of $4M over 24 months.
[code]....
I have been trying to create a formula that will enable me to pull data from the 'benefit' column(column D) so that the cell contents populate in a single cell in a table in a different worksheet.
TABLE 2:
Financial - Delivered
Financial - Enabled
Tech - Delivered
Tech - Enabled
Green - Delivered
Green - Enabled
[code]....
So, as an example, I am hoping that a formula can be created which pulls the text from relevant cells in column D when criteria from columns A, B and C are met e.g. Tech benefits that are Delivered in PJ2 would populate cell E3 ('Tech -Enabled') in Table 2 with:
Continued maintenance of hardware.
Increased capacity.
Pull Column Data (Sheet3) from Master.xls and past to Column 4, Sheet4 of WorkingSS.xls
I'm assuming this would be done with VBA or a really exotic macro.
The Funky Part would be that the WorkingSS.xls file column data is being copied/pasted too (WorkingSS1.xls or WorkingSS2.xls ect) the file may be different every time so I would need an insert in macro or VBA to "Choose File Please..." then continue.
The Master.xls workbook has spreadsheet lets say "Sheet1" in which I need all the data in Column A (except the header or cell A:1) copied TO WorkingSS1.xls on Sheet4, Column B, but Column B already has about 6000 rows of info, so I need it copied to the very end of (A:6001 although it will be different everytime) or the first empty cell at the bottom of that column.
next another Column from Master.xls workbook lets say "Sheet1" again in which I need all the data in lets say "Column B" copied to the WorkingSS1.xls on Sheet4, Column F. Caveat this time is that the data needs to copied to the same row as the first copy/past. So it would be pasted into F:6001. Double caveat is that the Column F contains no other data except for what we are about to paste in.
I have several more steps of automation to be done here but this is the beginning and a big hump I need to get past. The rest I think I can do.
Item Quantity
A 2
S 7
D 3
F 6
I am looking for a ranking formula that will pull the data from the
first column based on the ranking of the second column
so that the end result will look like this
1 S
2 F
3 D
As S has the largest quantity, F 2nd largest etc
The list I will pull this from is variable in length but in the
hundreds.
I got it when I click on the cell it loads the userform but it is populating with row data instead of column data.
I would like when I click on for example cell T4 and the userform pops up to see the textbox data going down the rows instead of across which is is currently doing.
so clicking on T4 brings my userform up filled in with information from
T5 and U5
T6 U6
T7 U7
T8 U8
T9 U9
I have when I click on the cell T4 column
label amount receipt
electricity 384.00 ZgHl2V
This way I can change amount or receipt and update my worksheet.
VB:
Private Sub UserForm_Activate()
Dim r As Long
r = ActiveCell.Row
[Code].....
I have stored production data in Column A. I want 5 data randomly pulled from that column with click of a button. Would this Happen?. I have attached an excel sheet.
View 2 Replies View RelatedI have a Pivot Table, with lots of data in, what I want to be able to do is on a separate sheet pull out the data from the first column(A), and then average out the figures from Columns(B-E).
When this has been done on the sheet (with the average data) in the next column, I then want to use Column(F) (from Pivot Table), and do a simple sum to work out 5% of the difference if it is greater than ZERO between Average Column and Column(F) (from pivot Table) Column(F) must be higher than the average in order to work out the 5%.
Is it possible to make every 17th row column A state the same thing without manually inputting it and then would is it possible to get every 17th row column B to pull certain data from other cells in B and put it together?
Example Column A has First Name, Last Name, and Phone. Column B will have the manual inputs.
Then I add another blank row after Phone for Password. The password will be the last name and last two digits of the phone. Is it possible to do this automatically if the other three fields are filled or does it also have to be manually input?
Here is what i'm working with:
http://img90.imageshack.us/my.php?im...uestionas8.jpg
what i want it to do is pull out the stuff in column C and put it in column F. But i don't want it to duplicate it at all. So for instance in this case, submarket 1 would be cary-morrisville-apex / submarket 2: northwest wake / submarket 3: north wake etc.
would this involve a VLOOKUP function but an if then function as well? I'm not really sure how to go about it.
I have three columns of data laid out like this:
Column A Column B Column C Column D
(blank) Purchase Orders Shipments # Shipment Reference Field
12345 1ZX123 xxOO12346
12346 1ZC345 KJH12347--45
12347 1Z7YYT 0000012345XXX
I'm trying to write a formula for column A that essentially looks at the field in column B, finds the instance of the data anywhere in the entirety of Column D, and when it locates it puts the corresponding field from Column C of that line in the results of column A. So the result above would turn out like this:
Column A Column B Column C Column D
(blank) Purchase Orders Shipments # ShipmentReferenceField
1Z7YYT 12345 1ZX123 xxOO12346
1ZX123 12346 1ZC345 KJH12347--45
1ZC345 12347 1Z7YYT 0000012345XXX
I have the origins of a formula here...but I don't know how to put in the part where i'm retrieving the data from Column C of the same line as the target data.
=INDEX($D$1:$D$100, MATCH(B1,1*LEFT($D$1:$D$100,LEN(B1)),0))
I have Put 15 Digit Number 234567890123456 in Cell A1. I am trying to get each Digit Seperately into Single Cell from B1 to P1.
View 5 Replies View RelatedAttached is the sample file.
Basically I have a number in column A, just wondering is that any faster to allocate the number into individual cell as shown in the attached file.
I have tried a slew of different formulas but I can't seem to get the outcome I am looking for. I need to make a station comparison for an individual project build based off a master list. Sheet 1 has the individual build with column A as a part number, column b as a description and column c as a quantity required and column D is blank. Sheet 2 has a master list of every part we carry formatted as: column a as a part number, column b as a description, column c as a quantity required and column d as a unique station identifier for that part (which is always a number).
What I am trying to do is match the part number on Sheet 1 Column A to Sheet 2 Column A, and when a match is found, take the unique identifer under column D associated with that part number and have it displayed on Sheet 1 Column D.
Sheet 1 will change with each build, but it will always be the same format in columns a,b,c,d. Basically I have a format on sheet 1 for what is needed to build each custom kit (787 kits) and sheet 2 carries every part we offer along with the identifer in column d (always a number value). I want to create a formula I can easily copy to match the value in sheet 1 column a to sheet 2 column a and add the identifier from sheet 2 column D to sheet 1 column D. The average kit is roughly 120+ parts so doing that for each part 787 times will be a nightmare. Also in case this matters, sheet 1 column A will have the parts arranged in a random order based on what is desired for that kit. Sheet 2 column A has the part numbers in order from our lowest part number to the highest number (basically an entire inventory list sorted from lowest to highest).
Example
(For sheet 1, since it doesnt carry formating 11111111 is in column a, nut, flange is in column b, 1.00 is in column c and the output data i want would go into column D)
Sheet 1
A B C D
11111111Nut, Flange 1.00 *Starts blank* -looking for - Output from Sheet 2 Column D (1)
33333333Bolt, Squared 4.00 *Starts blank* -looking for - Output from Sheet 2 Column D (4)
55555555Bolt, Coated 3.00 *Starts blank* -looking for - Output from Sheet 2 Column D (2)
22222222Bolt, Hex 4.00 *Starts blank* -looking for - Output from Sheet 2 Column D (11)
44444444Bolt, Screw Type 2.00 *Starts blank* -looking for - Output from Sheet 2 Column D (3)
Sheet 2
A B C D
11111111Nut, Flange 1.00 1
22222222Bolt, Hex 4.00 11
33333333Bolt, Squared 4.00 4
44444444Bolt, Screw Type 2.00 3
55555555Bolt, Coated 3.00 2
I have a file which is divided into 2011, 2012, 2013 and 2014 years in column A. I want these data in different column according to year. For example, Column E(2011), Column F(2012), Column G(2013) and Column H(2014).
Attaching sample a file with sample data to be converted.
It is also to be in consideration that data in column B and C should not be repeated and all year data should come in front of it.
I want this by coding or formula only. I dont want to use pivot table for this.
Expecting Result.jpg
Macro for a repetitive task. I have data in every 3rd column (max of 11 columns) that I want to extract and append the data in column A in sheet 2. The data contains some blank cells and I'd like to remove them also.
I've attached an example in this workbook : tractdata.xlsx
I have a single cell with 4 values in it all separated by commas and i would like to pull out each one separately. The number of characters in each value changes.
View 9 Replies View RelatedI have this data:
Box
Name Number A B C D E F G
Fx 2 A C E
Bx 1 B D
FX 2 A C F
And I would like it in a single column:
Name Number Box
Fx 2 A
Fx 2 C
Fx 2 E
and so on.
I want to make this automatic. The problem is the names of the boxes can change and the data can vary.
what's the quickest way to convert an array (range) of data to a single column?
I have varying numbers of rows with varying cells of data in each row. I need to quickly compile (transcribe?) all the data into a single column.
I have a very large spreadsheet, 25 columns and over 16000 rows. I want to merge all of the values into a single column. One caveat, not every cell has data in it, as shown below:
C1 C2 C3 C4....C25
2
I am having data in two columns (A & B ). Now I want to get the data in the single column(column C) . Here column A(Name) & Column B(Mobile No). it is something like below.
Here is my input data:
I want to get output results like below in the column C
I have to worksheets: Sheet1, Sheet2. In sheet 1, I have some data like this (in first col is 1, second col is a, third col is c etc. ):
1 a b c d
2 e f g h
.
.
.
.
I need in sheet 2 in range A1(only in this range one big text), something like this: a,c,e,g ........ ( row1-col2,row1-col4,row1-col2,row1-col4 ......) ( separated by ","). The number of rows from sheet 1 is variable. The dataf a,b,c,d,e,f,g,h ... is some random text.
I am trying to take data from multiple rows and columns (matrix) and reformat it all to fit in a single column.
It would be great if I could select the cells I want to reformat into the single column as the number of rows and columns containing the original data is not always the same (ie 20x20, 21x35, 56x200) etc...
I have a worksheet of data collected from on online list of names and addresses all in one column. I'd like to pivot the data so I can sort it, etc. Unfortunately, the entries are not the same length (meaning some have five rows some have six or seven, etc. I have created an only file so everyone can see the issue.
a href=[url]
I have thousands and thousands of rows of data which look like the spreadsheet screen shot shown in this image:
ExcelConsolidateRaw.JPG
I want to consolidate them so that they look like the spreadsheet screen shot shown in this image:
ExcelConsolidateDesired.JPG
How to insert it into a module in the VBA editor.
in moving data from multiple columns to a single column. I have attached a sample image from an excel file which details the requirement. The first column contains a qualifier, that should remain constant when the data from columns B to the end move to a single column "B". The number of columns for each row is different, however, there is a maximum number, say 25. As mentioned in the image, when the data from columns B to the end is moved in to column B, column A is retained fixed, to the original value, and the original data below it is pushed below. Any pointers to how this can be achieved by VBA or without VBA?
View 6 Replies View Relateda way to separate out data that has been all entered into a single column
code .....
The above information is a sample of the data. The data has been entered into 1 column, column A.
I want to separate the entries in to 1 column each for vehicle ID, full journal description, actual journal, EE code, Report total and equipment description.
transposing and sorting data into multiple columns.
Column 1 for example will have the Parent's Name. Column 2 will have the Children.
If Mark has 3 children, X Y and Z
Jim has two children, A and B
then I want Column 1 to display Mark and Jims Name and column two should display all the children
Here is how I want the data:
Column1 Column 2
Mark X
Mark Y
Mark Z
Jim A
Jim B
Please see attachment.
I saw this thread from June Cut & Paste Macro: Move Address From Column To Row and I think this what I would like to have my macro do. I have one column which is copied and pasted as text in excel and there is several blank rows.
I attached the spreadsheet example - it has 40 lenders, with the top row being the lender name (A1), followed by address(A2), city-state (A3), two blank rows(A4-A5), lender type (A6), approved date (A7), one blank row (A8), lender specialty (A9), telephone (A10) , e-mail address(A11) and two blanks rows (A12-A13) and A14 starts over again. For this example there should be 8 columns and 40 rows (lender name, address, etc...). As I mentioned I think the previous thread's macro would work with some minor tweaks. I couldn't figure out the best way to handle the blank rows and or remove the blanks and what to add or take out of the macro code.