I have the following data :-
SHEET 1
COL A_______COL B________COL C
V1990_______J100_________U1212
H2323_______Y999
U2222
SHEET 2
COL A_______COL B________COL C
U2222
I0000_______U8900________T67888
H2323
I need to search data from range defined A1.C3 and if any data in that range found in the sheet 2 that having the same records.
I am working on a data mining project and need to extract records based on a single condition. In the attached workbook you will see 5 columns – 4 Inputs and 1 Output. I need to automatically copy and paste on a separate sheet those records in which the Output value is greater than 970. A Record includes the values of all 4 inputs and the corresponding output value. I did this by hand for this subset of data but the actual number of record is extremely large so I need a macro which will do this for me automatically.
View 3 Replies View RelatedI have a column of numbers each have a 0. infront of them (example 0.2346
0.5698). I want to pull the number from the right until it hits the decimal sign. So for the two above the result would be 2346 and 5698
I'm doing a termination report at work and I need to create a pie chart based on data in a selected column. Ive never used excel charts before but I cant get the pie chart to display the information that I want.I created a sample workbook. Its very a simple column of data. I would like a pie chart based on the percentages of "yes" to "no". I havent been able to get it to work.
View 6 Replies View RelatedBook1 and Book2 are workbooks that I have modified in order to protect private information.
Book1 will have 11,000 records (my example Book1 has only 100). I need to rearrange Book1 such that it looks like Book2. Book2 has 20 complete records from Book1 combined into one single row, and my example Book2 has populated 3 rows only (3 rows x 20 records, making 60 records now appear on 3 rows only).
Macro for getting Book1 to Book2? 11,000 records in Book1 will take a lot of hours to transform into Book2 unless a macro can do the job for me.
Book1.xls
Book2.xls
I am trying to update a league table from a different sheet. The table is not fixed on how many people with be in it as this can grow. This what I have in mind to do what I need but can work out how to implement it.
I need to loop though column "A" in sheet "U8" range A2:A?
The value in column "A" is unique so from "A2" I then take the value in "K2" for this unique id.
I now need to search column "A" in sheet "U8 League Table" for the unique ID place the value of "U8 - K2" into column "D" (Round2) row will be different in most cases to round1.
If the unique ID is not found in "U8 League Table" then add it.
The U8 sheet is populated a fresh per event (fortnightly) and the data fed (riders score will always be in column K, different row) into the League Table. However. as the rounds mount the data will need to go into next column along in the Table i.e Rd1 in C, Rd2 in D, Rd3 in E etc.
I have a ListObject table called Table1, and the column name is Table1[Company]. The records have been sorted A-Z for the Company.
The records look something like this
Date Employee Company
-------------------------------------------
1/1/11 Jane A Company
1/1/11 Jane B Company
3/1/11 Bob B Company
2/1/11 Bob B Company
4/1/11 Bob B Company
5/1/11 Bob C Company
What I need is a sub() to look in the column of Table1[Company] and determine:
The # of records that match the criteria given the Company name, and where they start and end. Ultimately, I'd like to copy and paste this portion of the table to another spreadsheet.
So for instance, if the Company = "B Company", then I could find out there are 4 records and there locations to copy and paste them.
Any way to construct a formula in excel that will look at a reference in one column and find the latest date from the data in an adjacent column for that specific reference?
Below is an exctract from a much larger sheet of the columns in question.
The result in the last column should be 21/05/2014 for anything with D.O.001 in the second column and 15/05/2014 for anything with D.O.002.
Date Decision agreed
Disposal Order
Latest Decision date for D.O.
06/05/2014
D.O.001
[Code] ........
I'm trying to come up with a single formula to create a single column list from a table with blanks.
a
b
c
d
e
f
g
To
a
b
c
d
e
f
g
I know I've done this before but having trouble visualizing today.
I have a table that i use for a customer database. and the end user adds new customers to this table, what i would like is for a message box to pop up whenever cell B2 matches an entry in a column in the customers table. the table starts on row 25, and the column i would like to check for duplicates is column B. I would like the message box to give the user the message "A customer by this name already exists, Would you like to load this customers file?" If the answer is yes, then the row that the match was found on would be copied and pasted onto row 1. if the answer is no, then nothing else happens. I hope this makes sense, i am posting this sheet of my workbook for reference.
View 8 Replies View RelatedI have a very large table that has a one to multiple relationship in a GIS. GIS doesnt support that type of relation ship. I need to find records that are related to the single key but have different values than the first record for that key.
eg
Col 1 col 2 Col 3(key)
ab ab 1
bc bc 1
In this example, only the first row (ab) will be regarded in the GIS. so I need to pull out the second row and put it into another dbf based on the three columns so that I can then put it into the GIS so that the second row is considered and not ignored.
I have three worksheets called North, East and South. Data is held in each of these sheets starting in D1:BZ144 and the data is in columns of three. Example columns D:E is one set of records, F:H is another and so on. The first cell of each set of columns is the company name.
I need to copy all of these records into a Summary works sheet so that the records are in held in columns B:D and that the first cell is shown shown in column 'A'.
Secondly, in a second sheet I'm trying to setup a lookup so that I can call the company name and the records from the sheets North, East and South are shown that relate. I've tried using HLOOKUP but as the company name only appears in the first column I cannot get columns rwo and three to show.
I have a single excel data sheet with 10 rows of header information and then multiple rows and columns of data
I need to extract the 10 rows of header data plus the rows for each unique record in Col A into its own separate worksheet, with the work sheet name being the unique record from Col A
To further add to the challenge, the data in col A may have "/" in so will not comply with excel sheet naming convention so would like an error message to remind me to manually change a sheet name.
I attach an dummy data sheet just to show what I mean!
Item Quantity
A 2
S 7
D 3
F 6
I am looking for a ranking formula that will pull the data from the
first column based on the ranking of the second column
so that the end result will look like this
1 S
2 F
3 D
As S has the largest quantity, F 2nd largest etc
The list I will pull this from is variable in length but in the
hundreds.
I've got a master excel sheet with about 6000 rows of unique variables. In separate source files, I have many rows of these variables with information next to each. Each file has a random number of these variables, some a couple of hundred, some a thousand or two.
What I'm looking to do is to have the master sheet with all 6000 rows and have all of the information next to each variable, with new columns for each new bit of information.
I could sit there for hours copying and pasting each new bit of information to the relevant variable in the master sheet, but I'm convinced there's a quicker way. Is there, for example, a way to filter the master sheet based on the variables contained in one of the source files and therefore (once a-z sorted) copy all the information from a source file and simply paste it into the master file? Then once the filter is lifted the same can be done for the next file (there's only about 20 source files so that's manageable).
I have a range of columns i.e. 23 columns (i.e. B through X). Someone can write records in these columns (starting from B21).
Duplicates are considered the rows with similar data in columns 3 and 11. I know about the removeduplicate method and works really well but i want the duplicates not to be removed. Instead another column shall be checked for date of entry (user will entry date in format dd/mm/yyyy). The newest entry will change the value of the cell in column 4 (islatest column)to TRUE while all other records will be FALSE. This will work with the filtering of data on a pivot table on another worksheet.
I need to pull a reference number and assign it to all records in a particular section. The code I recorded keeps going back to the first section. Also would like it to repeat until all records have the reference number attached.
06010-100Beginning Balance07/09/2004AD06011-10007/23/2004AD06011-10008/06/2004AD06011-100
06011-100Beginning Balance07/09/2004AD07/23/2004AD08/06/2004AD
Sub Macro1()
'
' Macro1 Macro
' Macro recorded 10/14/2008 by acantu
'
'
Selection.Copy
Selection.End(xlDown).Select
Selection.End(xlDown).Select
Range("C7").Select
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=False
Range("B7").Select
Selection.End(xlDown).Select
Range("C63").Select
Range(Selection, Selection.End(xlUp)).Select
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=False
Selection.End(xlToLeft).Select
Selection.End(xlDown).Select
Selection.End(xlDown).Select
Selection.End(xlDown).Select
End Sub
I searched and searched and I can't find an easy way to do this without using Access which I am rubbish at. Is there an easy way to do the following in Excel.
I have several thousand records by row each with a unique numerical identifier. The unique identifier is the "Household". Within the household there are sub "Accounts". The sub accounts are truely unique. All the "Accounts" are in the same column.
What I am trying to do is combine the records into one row per "Household" with the accounts listed in successive columns. The maximum number of accounts there may be is 7 but it can be as few as 1. Example:
BEFORE
HH Acct
1 1234
1 2345
1 3456
1 4567
2 9876
2 8765
3 1113
4 5556
4 4447
4 3335
AFTER
HH Acct1 Acct2 Acct3 Acct4 Acct5 Acct6 Acct7
1 1234 2345 3456 4567
2 9876 8765 8765
3 1113
4 5556 4447 3335
I am trying to Loop Through a Folder Of Excel Workbooks and get required Info from one of the workbooks, back to my Master File.
I thought of "VLOOKUP" but I am not shore if it will work over Approx. 60 workbooks? if there is an other or better approach, I am open to all Ideas.
So far I have code to Open my Master and declare the criteria for the VLOOKUP with the help from:
Re: Run A Macro On All Files In A Directory
--------------------------------------------------------------------------------
See also this page on how to loop through a folder
Loop Through Folder Of Excel Workbooks
_________________
I am now able to open all Files in the sub directory, now I need to know how to approach my problem of looking for and getting the Info back to my Master File with approx. 5000 entrys to look for?
i found this code...
Code:
Sub Button1_Click()
Dim cnt As ADODB.Connection
Dim rst As ADODB.Recordset
Dim stSQL As String
Dim SNfound As String
'Your sqlserver 2008 connection string
Const stADO As String = "Provider=SQLOLEDB.1;" & _
"" & _
[code].....
but i dont see where to put in the Database object...
The Database it needs to connect to in SQl is called
The Server name is SQLSRV when you expand databases the database is called SWHSystem the Table is called dbo.Credential and from that i need to get SELECT All from the Name and CardNumber from dbo.Credential and put that in a New Sheet titled Personal
using Excel 2010 connecting to SQL 2008
I've attached a dummy worksheet that shows constant values of 1.00 in columns D and E. In the actual workbook, user action will sometimes cause these values to change to something other that 1.00. The user may wish to delete the action that caused the change.
I need a macro that will search from the last cell in column D upward to the first instance of a cell that is not equal to 1.00 and select that cell and those immediately above with the same value as the first found cell.
For example, in the attached worksheet the search would start in the last cell of Columd D and search upward. It would find cell D23 and upward to D19. These entire rows would be deleted.
I'm trying to conditionally format rows of data based on duplicates in the first column, then filter the results. I have a table of data with mutiple variables assigned to different "headings" that looks a little something like this:
A
B
C
D
[Code]....
[selects the table, then GoTo Special selects the blanks, fills in the blanks with the cell above, then Copy and Pastes As Values the entire table again to fill everything in]
I’m stuck on how to input a formula into the conditional formatting window that will:
Format the text to white in columns A, B, and E based on there being a duplicate above that row in Column A only. i.e. conditionally format the values with a * below:
A
B
C
D
E
[Code]....
If I use the conditional formula I found: =A1=A2, then cell E3 gets made white text when I don’t want it to, hence the “referencing column A” part of the question (Column A is always a unique ID number whereas Column E can have a duplicate in the row above). [Edit: Why can't I type Enter or put a line break here... I'll try re-edit at home...] When I go to filter on Column C for YYY again, the conditional formatting needs to realise to un-white the text, which is my next headache because it means conditional formatting that acts relative to hidden rows as a result of a filter... Oh and did I mention the client wants this done in 2003? This is an afterthought though – as I can force them to use 2010 if need be
From a table like the one here, how can I generate a list (without spaces) of all the names only? Perhaps filtering by "Mr","Miss","Dr" or something? The result I'm after would be a column on a new sheet that ran:
Mr James
Mrs Milly
Dr McAllister
Miss Aujard
Mr Barker
Mrs Stanley
I need to concatenate varying numbers of cells based on duplicates found in a separate column, but I'm not sure how to approach it. I have 41,000+ rows of data, so I have to find a formula.
Example:
1AB2Denton, PaulFB357D4D3OwensTest, MarcyFB539F934Brennan,
JosephFB539F935Bowser, AmyFB539F936LaRock, ChuckFB667D3B
Based on duplicates in column B, I want to combine the data in column A into one cell. The duplicates in column B could be only 2, or could be 20+.
I have a new request concerning my warehouse managing.
I am getting back to this thread [URL]....
The request is as follows: When having the list of all the shelves, I'd need to create a new sheets with following data in a single column
shelfcodequantity
reporting in order all the shelves with code and quantity.
My idea is as follows:
1 - to create a sheet with all the shelves
2 - to create a function that reads in this sheet the name of the first shelf, then searches in other sheets the shelf and copies to a result sheet all the records found
3 - then passes to the following shelf name
4 - and so on, until the shelves lists ends.
Please note that in each sheet I have these data in two columns.
I am here attaching you an example
My problem is this:
How to tell in VB to realize step 2 ?
Through a query I extract data from an oracle database. This database creates a record for every unique Article_Batch_Pallet_Faultnumber combination. Through a filter macro I create a new format on a different worksheet which creates a record for every uniqe Article_Batch_Pallet combination. I need a searchfunction to get the faultnumbers in the same row.
View 2 Replies View RelatedI am trying to rank records from multiple sections of a single array. Since there are over 100 sections I want to use a formula. Using the MATCH function I have the first row for each section of the array (Col D below). The psuedo code of what I'm trying to do is:
RANK(B1,Bfirst row of section:Bfirst row of next section -1)
Example (results in Column C):
A B C D
1 West 100 3 1
2 West 150 1 4
3 West 125 2
4 East 50 3
5 East 75 2
5 East 140 1
I will also need to increment the section as I complete each section of the array. Am I trying to do too much in a single cell??
I have Put 15 Digit Number 234567890123456 in Cell A1. I am trying to get each Digit Seperately into Single Cell from B1 to P1.
View 5 Replies View RelatedAttached is the sample file.
Basically I have a number in column A, just wondering is that any faster to allocate the number into individual cell as shown in the attached file.
I have a set of related variables that are split over multiple worksheets, and I need to be able to take specific information, duplicate certain values and produce an output sheet for use in a separate piece of software.
The variables are:
Position Number (Sheet 1)
Position Title (Sheets 1 and 2)
Position Requirement (Sheet 2)
Requirement Importance (Sheet 2)
The output sheet requires a list of all the requirements for each position number, which means the position number itself needs duplicating (in new rows) X number of times, where X is the number of requirements assigned. The appropriate requirements are then to be pasted in next to each position number (and the requirements can be found by comparing position number to title, and from title to requirements).
Normally, I’d be able to do this using lookups and so forth, but my problem arises when I have multiple position numbers with the same related title (in the attached example, there are three plumbers with unique position numbers). I can’t figure out how to say to Excel “a plumber has five requirements, and there are three plumbers, so duplicate each position number for each plumber five times, then insert the appropriate qualifications (and their associated importance values) next to the position numbers”.