Pull Data From One Sheet To Another

Mar 11, 2014

I am trying to get the starting point for this new sheet going but I am not able to formulate the required code. I will explain what I want to do

In the attached sheet, I have three tabs

Over 20K
Under 20K
PartNumList

This is what I want to do...In PartNumList tab if Annual Rev (Col O) is less than 20K then value in Col (A) i.e Part Number should be copied and pasted in Under20K tab... it has to pasted in either B18, B24,B30,B36, if B18 is populated then B24 if that too is populated then B36 and so on..

I want to do that same for Over 20K but if I have a starting point for Under 20K I can work on it offline too..

View 5 Replies


ADVERTISEMENT

VBA Code To Pull Data From A Sheet Based On Date And Add That Data To Another Sheet?

Aug 8, 2014

I use my workbook to track sales data from one store to the next. I use my workbooks to compare data from year to year. Each year's data is displayed on a separate worksheet. '2013' has 2013's data, '2014' has 2014's. On the 2014 sheet, I have a Prior Year's Sales that pulls data from the previous year's spreadsheet using a formula which I just drag down each day I enter sales. I would like to automate this process and have the VBA code check for today's date and automatically pull the previous year's sales data from the '2013' sheet and put it in the appropriate cell on the '2014' worksheet. I hope I have explained this well enough to understand. I've included a link to my workbook for reference.

I had to use dropbox since I can't post a file over 1 MB. The file size is around 1.25 MB.

View 5 Replies View Related

Pull Data From Two Sheet And Paste Into Master Sheet With Desired Column Only

Aug 28, 2013

I want vba code to pull data from two sheet in workbook, code has to pull all data from first sheet , then pull data from second sheet and paste some particular column only below first column sheet

e.g i pull data from two sheet(ONSITE&CCI)

SHEET-1ONSITE CONTAINS HAVE 57 COLUMN
SHEET-2 CCI CONTAINS ONLY 19 COLUMN
FIRST I PULL 57 COLUMN DATA ONCE FINISH MOVE TO SECOND SHEET CCI CONTAINS 19 COLUMN BUT ITS HAS TO PASTE DATA BELOW DATA OF ONSITE TO PARTICULAR ASSIGNED COLUMN'S ONLY BUT COLUMN NAMES IN BOTH SHEET IS TOTALLY DIFFERENT

View 1 Replies View Related

Macro To Pull Data From Multiple Sheet To Main Sheet Based On Column Headings

Sep 13, 2012

I need a Macro which pulls the data from different sheets of excel (which is not formatted properly) to Main Sheet. Also some of the columns will not have the same names, so macro should handle this exception as well.

View 8 Replies View Related

Cant Pull Data From Another Sheet After Drop Down List Selection From Another Sheet

Jul 31, 2009

I have an excel workbook with two sheets. Sheet 1 has a list of people names, rank, address, and phone numbers. Sheet 2 has boxes where a user can select a last name from all last names in sheet1. What I want to happen after the user selects the last name in sheet 2 is for it to automatically fill in the rest of the data (ie Rank, First Name, Address, city, Home phone number, Cell Phone number). What do I need to do in order for this to work?. Attached is a very small example of my much larger project.

View 3 Replies View Related

Macro Pull Data From Each Sheet And Create A Summary Sheet

Jan 26, 2009

I need to create a macro that will scan a spreadsheet for the number of sheets and then pull data from the same places on each sheet in order to create a summary sheet. Let me try to explain a little better.

The spreadsheet I'm working with has a separate sheet for each new deal our company makes. Each of these sheets is in the same format - we use a template and fill in the data based on that whenever a new deal emerges. The sheets contain basic info about the deal in the first few rows and columns, then some narratives with dates describing the progress of the deal, and then a list of issues and whether or not they have been resolved. The problem is, each of these sheets contains too much info for a quick, high-level overview with the bosses so they've asked me to create something that will pull the basic info, the most recent narrative, and any unresolved issues from each sheet. This way, each time there's an overview scheduled with the bosses, the macro can be run and it will create a new sheet with data from each sheet in the workbook.

View 9 Replies View Related

Macro To Pull Data From 1 Sheet And Filter Into Another Sheet

May 14, 2014

I'm trying to get the data from Receipt log (sheet 1) to automatically populate into the Print Receipt (sheet 2) and to automatically filter and go to the Activity by account (sheet 3). I am so new to this and totally lost.

See attached sample : Student fees.xlsm

View 12 Replies View Related

To Pull Some Data From One Sheet Into Another

May 1, 2007

I need to pull some data from one sheet into another. Here is an example of what I am trying to do if anybody know hows to do this? I need a formula that will look in sheet 1 look at the idnumber, match it with the idnumber in sheet 2 ande fill in the serial.

sheet1
idnumber serial number
12345 66181
12346 66182
12347 66183

sheet2
idnumber serial number
12345 insert serial number here
12346
12347

View 9 Replies View Related

Pull Data From One Sheet To Another

Dec 16, 2011

How to pull data from one sheet to another. I have 2 sheets Sheet 1 and Sheet 2. I have data in cell A1 in sheet 1 and i need that same information onto sheet 2 in cell C10. I know on sheet 2 cell C10 i can type in this formula ='Sheet1 '!A1 and it works great.

The problem i'm having is if i clear sheet 1 data it is also clearing out the data in sheet 2, the formula remains but the data is gone. I need that data to remain on sheet 2. Is their a way to do this?

View 2 Replies View Related

Pull Data From Sheet Based On Criteria - Populate UserForm And Ask For Missing Data

Feb 8, 2014

I have a spreadsheet that is updated weekly -- but every week new info is added that needs a user to input corresponding info. I use a vlookup function to link to another spreadsheet that populates the info from previous weeks and the info that is missing shows up as #N/A...

First I was using a msgbox function to get the info:

HTML Code: 

For Each b In myrange
If Application.IsNA(b.Value) Then
Employee = b.Offset(0, -2).Value
SSID = InputBox("Please enter ID# for " & Employee & " :", "New Employee Found")
b.Value = SSID
End If
Next b

But it can be up to 30 different new employees... and that is time consuming.

I would like to make it more user friendly by creating ONE userform that displays all of the employees as labels -- has a text box in which to put the ID # -- and then has a drop down box to choose the type of employee (2 options). I want all of that info to go back to the reference spreadsheet so it will be saved for following weeks, and then redo the vlookup to get the info into the new weekly spreadsheet (I can do that part)....

HTML Code: 

Private Sub CloseButton_Click()
Unload UserForm1
End Sub

Private Sub ComboBox1_Change()

[Code] ......

View 2 Replies View Related

Using Dropdown To Pull Data From Another Sheet?

May 9, 2013

I have a drop down that provides all of the sheet name in the workbook. When the user selects a sheet name, I would like specific cells to pull data from the sheet name selected. What I thought would work is =Sheetname(A1)!E3 where the cell would pull data from cell E3 from the drop down sheetname in A1

View 7 Replies View Related

Data Extraction (pull The Data To Another Sheet For Each Line)

Feb 23, 2010

I want to pull data from another sheet, however there are multiple listings of each and I want to pull the data to another sheet for each line. I maybe easier if I try and show below:

Col. ACol. BCol. C
Smith101
Jones512
Green65
Black1214
Smith 3612
Jones1512
Dual25
Green1225

I want to pull this data for each name in Col. A in to another sheet. I've tried "IF", "Vlookup" and a couple of others, it just seems to be hitting the first option and pulling the data but not the ones below.

So if I selected Green on the second tab it brings through the "6" and "5", but not informtion from the listing from Green below. So I wiould like to list all the Green's, and the applicable data.

View 4 Replies View Related

Do VLookup And Pull Data From 2 Or 3 Sheets To Another Sheet

Dec 18, 2013

I have a "main data"Test.xlsx sheet wherein I have to populate 4 columns from 2 other sheets.

E.g.: In master data tab, I have (PID,EMP ID,Name,Address,Join Date, Exit Date). Now i am trying to get the PID & Address from another tab called "PID,Address". To get the PID & address, i will use EMP ID as reference to fetch data.

Similarly, I have to pull Join & Exit dates from the tab "Dates Sheet" with same EMP ID.

I have a home tab, wherein I have a button which is assigned a macro to reconcile the data.

I know that I can do this with simple vlookup for all the columns, but the actual data is very huge and it may vary daily. So its time consuming process. So i want to this reconciliation (consolidation) using macro. How to generate a macro.

I am attaching the sample sheet : Test.xlsm‎

View 11 Replies View Related

Pull Data From One Sheet To Another Based On 4 Conditions

Jul 7, 2014

I am moving along in my masters project and I am having a problem organizing some data I got dumped with.

What I have is a 196 x 196 matrix of the worlds countries and the distance between each one. So each Row has a title header of a country and each column has a country and the cells between the two are the distance of said countries.

On another sheet I have about 10 000 different combinations of dates/years/months ect that I need to populate in order for Stata to work properly.

Rather than manually enter thse in one by one or copy paste what I would like to do is write a code that would do something like this.

If on sheet 2 (the combination sheet) A3 = Afghanistain and C3 = China than F3 = The China/Afghanistain intersection (In this case AN3 on the Distance Sheet)

I am having problems because I can't see to figure out a way to have a program lookup the intersection and give me the China/Afghanistan number based on all the conditions. I am assuming I need to use a matrix lookup of some sort. This way when I do some like Canada/Denmark on the Combination sheet, it will automatically look up and populate the distance from the distance sheet (That being AZ33).

View 10 Replies View Related

Pull Data From Multiple Sheets To One Sheet If Criteria Met?

Jun 16, 2014

I have a spreadsheet with 12 tabs (one for each month of the year). What I need is a macro/function that on execution will pull all rows from each sheet that has the word "overdue" in cell E from E9 down. I need the whole row of data being taken into a new sheet.

So for example, in each sheet there could be the word overdue appearing in 30 out of 500 rows I need those complete rows (A to Y) being put into another sheet for ease. At the moment I am filtering each sheet and copying and pasting into a new sheet for each bloody sheet (LOOOONG way).

The worksheets are titled: Jan 14, Feb 14, March 14, April 14, June 14, July 14, Aug 14, Sept 14, Oct 14, Nov 14, Dec 14

View 6 Replies View Related

Excel 2003 :: Formula To Pull Data From One Sheet To Another?

Jan 16, 2014

I have Excel 2003

My spreadsheet has multiple lines of data for multiple items (have a specific item #) and I need to be able to enter an item # on a different sheet so that the requested information can be pulled from the data source. The items have information on multiple rows. I need to have all of the rows pulled into my output file when I specify the specific item. #.

I have attached a spreadsheet showing the type of data is contained and what my desired output would look like.

View 1 Replies View Related

Methods To Pull Data From Another Sheet Using Dropdown List

Jul 19, 2014

I am doing a spreadsheet where I have 1 main sheet and 2 sheets with data.On the main sheet I have a drop down list to select either one of the 2 sheets and upon selecting,all the data from that selected sheet will be displayed on the main sheet.

What i do not understand is the code given below

data:=IF($C$7='A2'!$A$2,INDEX('A2'!$A$6:$B$20,ROW( $A3),COLUMN(B$1)),
INDEX('A1'!$A$6:$B$20,ROW($A3),C OLUMN(B$1)))

How do i attach spreadsheet in this forums btw?

View 7 Replies View Related

Pull Out The Data In The DATA TABLE Sheet

Mar 11, 2009

I've been playing around with VLOOPUP, MATCH, SUMPRODUCT... But I can't seem to get this one right..

See the attached Excel file..

I think it should be fairly explanatory.. I want to use the dates in SUMMARY sheet, to pull out the data in the DATA TABLE sheet. The numbers in Column A on the DATA TABLE sheet, is first date in each month, and the numbers represent the day of the month.. .

Example:
01.01.2009
1
2
3
4
5
..
30

01.02.2009

View 5 Replies View Related

Pull Data From Others Sheets Using Drop Down List To Select Sheet Name?

Sep 29, 2010

I'm not including my spreadsheet because it has company information however, I will try to articulate my request as best I can. I currently have an Excel spreadsheet with about 20 worksheets, I would like to be able to click on the first worksheet, create a "Drop Down box" or "Data Validation" box or whatever I need to do to be able to view information in a range of cells on ANOTHER worksheet within the same workbook.

I've tried Data Validation, Drop Down Boxes, Define name ranges, all to NO avail. I'm missing a step somewhere, because I'm still not able to view the information on the first worksheet.

View 3 Replies View Related

VBA Code To Pull Data Multiple Times Into Master Sheet?

Feb 20, 2014

Data extract from sheet to sheet through column header values, i have set of data on sheet1,2..loop end of sheet

i want pull column data from multiple sheet column values into masterdata sheet depends upon column header values assigned in masterdata sheet.. my code works fine! but i want pull data if column header repeats more than one also

SO_NBR this is one heading in multiple sheets i cant pull col values not more than once under if SO_NBR repeats more than once.

[Code] .....

Find the attachment mentioned as expected result sheets is my requirement : HEADER_UPDATES_AIO_$.xls

View 12 Replies View Related

Link Cell From 1 Sheet To Another: Pull Data Based On Time

Oct 17, 2006

I'm trying to make a floor plan which shows what seats are available depending on the time it is. So I made sheet1 = to the map (where the seats are located), sheet2 - rows = seat #'s, columns = Time (broken down by half hours). Now i have conditional format to show "t" in red (which means taken), "f" in blue (which means free), and "n" to show in gray (which means not working).

What i need is example - Seat # 200 in sheet 1 to show red, blue, or gray depending on the value in the row that corespond to this seat and the column that corespond to the current time.

View 9 Replies View Related

Macro To Pull Data From Dynamic Named Multiple Worksheets Weekly Into A Master Sheet

Jul 11, 2014

Attached is a master metrics deck, where data needs to be refreshed every week, from two different workbooks.

The catch is, the two parent workbooks would be new versions every week (data would be same format, and style within), but file name would change each week, for eg: for 1st workbook, 'XXX_Weekly_Week24.xlsx' to 'XXX_Weekly_Week25.xlsx' and so on.

for 2nd workbook, 'YYY_Weekly_Week24.xlsx' to 'YYY_Weekly_Week25.xlsx' and so on.

In the master metrics deck, a consolidated vew of some of data from workbook 1 and workbook 2 is presented for each week.

This master file would remain same, and only be refreshed each week (preferably with a button on its sheet "REFRESH!!")

Next, need to manually change cells C2:G2 each week to reflect week titles correctly.

For e.g.: week6 would show week 1 through week 5, but during week7, it needs to show week 2 to week 6. Only last five weeks of data any given time.

The first datarows of each set are conditionally formatted (they are compared with other rows in the set and need to reflect danger values, good values etc) (I have done that already).

View 1 Replies View Related

Pull Out Information From Main Sheet To Summary Sheet?

Mar 1, 2013

I am trying to create a summary sheet from the matrix to do further analysis. I want to pick out the welds done everyday with weld inches as you will see in the summary sheet. How can summary sheet be automatically updated when I enter the inspection date rather than copying and pasting? I can use vlookup to get the weld dia once I get the weld numbers on that date. I have attached the file.

View 3 Replies View Related

HOW CAN I PULL INFORMATION FROM ONE SHEET TO ANOTHER IF NOT #

May 26, 2006

I need a formula that will take info from sheet A column K only if sheet A
column E is equal to sheet B column E. I need it to paste into Sheet
B column K exactly as shown in sheet A column K.

I tried using a Vlookup formula but I got #N/A and I am not sure if that is
because there is text as opposed to numbers or if I am using the wrong
function entirely.

View 10 Replies View Related

Pull Names From A Database To A Particular Sheet?

Feb 11, 2014

I'm looking to pull names from a database to a particular sheet based on what info is displayed in the database. I have six names listed in the database with a league type and position. I have three different tabs at the bottom for where the info is supposed to pull depending on the player type.

For example, I want all six players to pull to the 'Mixed' tab and populate the appropriate area based on their position. Next I'd like the 3 players with 'AL' for their league type to populate only on the AL tab and likewise for the players with 'NL' for the NL tab. Not only do I need the players to pull to the appropriate tab but i also want them to populate in the right position within that tab.

View 8 Replies View Related

Pull From Another Sheet And Sumproduct And TEXT

Oct 16, 2007

I have sheet 1 which has titles set up in column A. These titles are pulled from Sheet 2 (same column). I also have a date listed at the top of sheet 1 (in the same row as dates in sheet 2, but sheet 2 contains multiple columns for each quarter). I would like to set something up where if the date in sheet 1 matches the date in sheet 2 it pulls the corresponding values from the named rows in sheet 1. I tried using sumproduct but its not working b/c it wont take TEXT. Plus I want it to search across all of the columns, not just one.

Below is sheet 1 and I would like to be able to pull 1Q08 values from sheet 2 (which contains the values for every quarter). This is my formula (the first part is the date, the second is row titles, the third is the value (although its only pulling from one column, it s/b pulling from all) :

=SUMPRODUCT((Sheet2!B1:B6500=sheet1!B6)*(Sheet2!A1:A6500=Sheet2!A7)*(Sheet2!BA1:BA6500))

Is there someway to fix this, it would be a huge time saver.
--------------------------------------
1Q08
Revenue
Direct Costs
Gross Profit
Indirect Costs
Stock Based Compensation
Restructure Charge ....................

View 4 Replies View Related

Lookup And Pull Results Into New Sheet

Mar 27, 2009

I am trying to find a function that will scan down a column to find a particular criteria. I would like all the cells that meet this criteria to have their entire row pulled through to a new sheet.

For Example, In the attached spreadsheet, I would like everyone in sheet 1 to have their details pulled through to sheet 2 if they are in class 1, sheet 3 if they are in class 2, and sheet 4 if they are in class 3.

View 2 Replies View Related

Pull Dates From Every Other Cell To One Sheet?

Mar 18, 2014

I have a list of names in one colm, and date of birth and date of death in another colm but in two rows. I'm unable to merge the cell, so I decide to place each date of birth in one colm and date of death in another colm. But I cant get the formula to read each of the colm as just birth and the other to read just death, unless I plug each and everyone one of them one by one, and this is long list of people roughly 150.

Sheet#1
NAME | DATE OF BIRTH | LOCATION
| DATE OF DEATH |
Sheet#2
NAME | BIRTH | DEATH | LOCATION

Take information from Sheet#1 and display them into Sheet#2 format

[URL]

View 3 Replies View Related

Pull Sheet Name From Vlookup Function

Feb 14, 2008

I have a vlookup formula which can refer to any one of several sheets labelled by month.

I need to be able to show in a different cell which sheet (month) the formula refers to.
In other words - displaying part of a formula in a different cell.

View 3 Replies View Related

Pull Pictures From Folder To Excel Sheet?

Dec 5, 2013

I have an excel sheet where column B has a list of product codes. I also have a folder with pictures of each product and file name of the pictures are the product code. I would like to place the picture of each product in column A beside their respective codes. If possible, I would also like to reformat the pictures so they fit in the cell. (3.00 x 3.85)

Need a Macro that can run this.

View 5 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved