Pulling Data From Main Sheet To Subsequent Sheets In Workbook
Jul 25, 2014
What I want to do is take information from a main sheet and pull certain rows (determined based up on the selection made in the delivered to column) and move it to a worksheet that contains information only for that individual entity. Below is the list of headers in my lis of all information
Ticket #DateDelivered ToNet kg WtTonsRunningTotalDaily Total
As I said, depending upon the name in the delivered to, I would like to carry forward the following information only for the specified vendor. For example if we have 3 entries 1 delivered to company a, 1 to company b and 1 to company c, each would carry forward to the respective worksheet for that vendor.
Ticket #DateDelivered ToTons
how I might accomplish this in a usable format for what I am trying to do.
View 2 Replies
ADVERTISEMENT
Mar 25, 2014
I have a data sheet that I enter all data into. I would like to divide the data into different sheets depending on the month the job was entered. Please see a sample I have attached. I have tried to convert the month (colE) into a figure (colF). I am hoping the data automatically copies across into the correct month sheet or perhaps I can push a button and it will do it for me. Data will get entered on a daily basis by staff but only onto the main sheet, this will then by some miracle be duplicated into the corresponding sheet without loosing any data on the main sheet.
View 8 Replies
View Related
Mar 29, 2009
I have already placed a siniliar question but I think it fell through the cracks or it was to difficult to understand!! I am losing my mind as the hrs tick down and I can't get this done
I have a detailed sheet called "detail"
I have 5 other sheets called "J1" "J2" "J3" "J4" "J5"
The sheets are exactly the same with headers already in. However "detail" sheet has all the detail and the "J" sheets are blank.
I need a macro in a command box that will start on line 5 of the detail section and look in column "D". if either of the "J"s are in column D then the row will be copied, cell colour turns green, and pasted in one of the 5 "J" sheets depending on the value. This process should continue to loop until there are no more lines left in "detail" to copy
I just can't get my head around how to write a macro that will perform this. I have searched through different threads and tried and manipulated a few but I can't get it to work at all. I think I am so frustrated after 8 hrs that
View 9 Replies
View Related
Apr 29, 2014
I am trying to create a formula which will allow me to type a word in a cell on the Main sheet, and then pull any row from multiple sheets and display them on the Main sheet. For example, my sheet named Main looks like this:
A B C D E
1 Query:
2 Fruit Store Cost Mode Date
And there's a sheet for each month with the same format and different data:
A B C D E
1 Fruit Store Cost Mode Date
2 Apple Dominicks 1.99 Bagged 3/16/2014
3 Apple Piggly Wiggly 2.19 Ala Carte 3/14/2014
4 Banana Jewel 0.49 Bagged 3/1/2014
5 Banana Dominicks 0.57 Ala Carte 3/16/2014
6 Banana Costco 0.69 Ala Carte 3/16/2014
7 Cantaloupe Jewel 2.99 Ala Carte 3/14/2014
8 Cantaloupe Dominicks 1.99 Ala Carte 3/1/2014
9 Eggplant Jewel 0.99 Ala Carte 3/30/2014
10 Eggplant Dominicks 1.19 Ala Carte 3/30/2014
11 Eggplant Costco 1.29 Ala Carte 3/21/2014
12 Eggplant Safeway 0.79 Ala Carte 3/16/2014
13 Pears Jewel 1.19 Ala Carte 3/14/2014
14 Pears Dominicks 1.59 Bagged 3/1/2014
15 Pears Piggly Wiggly 0.99 Ala Carte 3/30/2014
16 Rhubarb Jewel 0.99 Ala Carte 3/14/2014
17 Rhubarb Piggly Wiggly 0.59 Ala Carte 3/14/2014
18 Rhubarb Costco 0.89 Ala Carte 3/14/2014
19 Tomatoes Jewel 1.99 Ala Carte 3/1/2014
20 Tomatoes Safeway 1.69 Bagged 3/30/2014
21 Tomatoes Dominicks 1.89 Carton 3/27/2014
... and so on. On my main sheet in Cell B1, I want to type a fruit name, such as Banana, and have every row in every sheet with Banana in column A,pulled and displayed on the Main sheet. Firstly, is this even possible with a macro?
View 4 Replies
View Related
Apr 17, 2012
I have a workbook with several sheets of varying length (amount of columns). The length of each sheet changes every week. I want particular data from the sheets to come together on one sheet in as organized a fashion as is possible. I'm currently losing my mind copying and pasting every week when I need to update the thing.
View 7 Replies
View Related
Jul 7, 2009
I have multiple sheets Names(Sheet1-Sheet5).
Im trying to compile them all on the same sheet (Main Sheet). But each sheet is NOT the same. I need to choose what Columns needs to be copied (I can use one macro for each tab if needed)
For example I need Sheet1, Columns (A,C,E,G,S) copy that and then go to (Main Sheet) and paste in the next blank line (column A)
Seems like it does not know where to paste.
Here is one I have tried ....
View 9 Replies
View Related
Feb 26, 2013
I am building a workbook for small group of people in my office to use. I have 7 tabs, the first one is called Main Sheet and the other tabs are the names of each person using the excel workbook. Every tab looks the same, I have the columns labeled: date - job number - job name - contact # - comments
My desire is that each person will be able to input their data on their tab as they receive new jobs, and the main sheet will be a compilation of everyone's sheet. So to clarify, as new information is added to one tab this entire row of information will automatically be added to the next available spot on the main sheet. We are all on the same server so we can all work off the same file. Is this possible to accomplish?
View 2 Replies
View Related
May 17, 2013
I have a file which has a number of sheets each relating to a different project. Each project has a line for each milestone starting at the same row but each project has a different number of milestones.
I would like to create a summary sheet that either pulls through each row relating to a milestone from each project sheet or ideally each milestone that relates to a certain month from each project sheet (each milestone includes a completion date).
View 3 Replies
View Related
Feb 13, 2009
I am creating a spreadsheet for mutiple clients, which has around 5 columns. This spreadsheet will have 7 sheets on it. 1 sheet for each client, and the 7th will be to display all of the information together.
Basically I am looking to find out if this is possible?
I will try and explain a bit more, as above is just beifly what I am loking for.
I Have Client.xls
On my Tabs I have
Client1, Client2, Client3, Client4, Client5, Client6, All Clients
In Each individual spreadsheet, I have the following Columns
Incident Reference; Description; PMDB number
Each Day data will be entered into each client sheet, and I would like this information to be populated into the All Clients Tab. I am not sure if this is possible, and if it is, would I then be able to put it into the All Clients tab, and have it auto sort by the incdient reference column? As this is an autogenerated reference for all of our clients.
View 9 Replies
View Related
Aug 29, 2008
I would like to use VBA to search a folder and copy data from tabs within the excel files there. The data will be pasted to a tab of same name in the the main file. All the files are in the same format.
So far I have only managed to list the files in the folder using code I found on your site!
View 7 Replies
View Related
Dec 26, 2013
I'm trying to create an auto fill setup where 12-15 work sheets all get their data from 1 main sheet where I will import sales numbers. On a monthly basis I create reviews for all sales personel and the inputting of data alone uses precious time. So I would like to import the sales data, seperate it by column, and have the data auto fill the sales associates fields automaticly. So if I import the data to sheet 1 and associate John Smiths sales data fall on cell A1 thru A20 and directly below him Jane Doe's sales data falls on cells B1 thru B20. John's review will auto fill from the data on A1-A20 and Jane will have an identical review on a different sheet that auto fills from the data in B1-B20.
View 4 Replies
View Related
Mar 4, 2014
I want to calculate all datas from everyday of a month in a main sheet which is like;
{=average(if(('(1)'!$C$3:$C$15=C3)*('(1)'!$V$3:$X$15>0);'(1)'!$V$3:$X$15);if(('(2)'!$C$3:$C$15=C3)*('(2)'!$V$3:$X$15>0);'(2)'!$V$3:$X$15))}
In the main sheet C3 cell will be equal to c3:c15 serie and values in the v3:x15 serie will be greater than 0. Then formula calculate average of v3:x15 values based on c3 cell like vlookup. I'm writing formulas like that everytime and want it to get datas from all days of a month from 1 to 31. I tried '(1)31)' and when named sheets like 1,2,3 '1:31' i got #value error however when i write 31 if formulas for all days i got the correct results.
View 1 Replies
View Related
Feb 6, 2013
I have an attendance file w/least 30 sheets. 29 of the sheets are for each separate group. The other sheet is the main one where I need to collect information like "total participants in attendance" and "total members in group" Then I divide those two and get the percentage of attendance.
The sheets containing the individual groups info are set up like this... (1=they were in attendance)
GROUP 1
Name / January / February / March/
Jess________1________0________1
Ryan_______1________1________0
Joe ________1________0________0
----------------------------------
total P ____3________1_________1
members___3________3_________3
% _______100_______33________33
The main sheet looks like this
Group / Jan. Participation / Jan. Member total/
Grp 1 ________3_____________3
Grp 2 ________8_____________10
Grp 3 ________7_____________10
---------------------------------------------
_____________18____________23
% total-__________________78.2%
I know I can manually go through and link the sums of participation and total group size into the main sheet, but I have a lot of workgroups and need to do this every month, is there an easier way? I am willing to change the set up of the sheets.
View 2 Replies
View Related
May 6, 2014
I have a workbook that contains multiple sheets, currently five sheets of which only two of them are Info Datasheets.
I would like to create a VBA code that pulls data from multiple info datasheets and compiles that data into one Main Database sheet. However, after that initial collection, I need the code to maintain the rows data. Specifically, if any row's data changes in the info Datasheets I need that row on the main Database sheet to update.
The columns in the info datasheets range from A:AH, however I only need the columns A:E to be copied. And I would like the code to add column F in the main datasheet displaying the sheet name were the data was retrieved
Each Info sheet (Metals, Polymers) are setup identical; Rows 1:3 are the headers, and Column D and/or Column E will denote a change to the row.
The Main Database sheet (Table of Context) has 2 rows for the header. So, the data will start on row 3
F-S886 (Material Properties Database)_DRAFT_5.xls
View 7 Replies
View Related
Oct 21, 2009
I'm looking for a solution for my worksheet. I've got a main tab in which contains deposit data, I need to take the raw data format it and break it down into 7 different tabs. Each week a report is exported and then one for the actual month containing all the data. I’m currently manually recording some formatting macros because I haven’t learned to write my own yet. The number of columns in this report is always constant but the rows vary depending on the number of deposits. I have 7 tabs where the data from the main sheet will be broken down in. In my spread sheet I have the following headings. (A1)Date, (A2)Batch, (A3)Source (A4)Control (A5)Total Batch (A6)Total Variance
The information I would use to copy the rows to other sheets is going to be based on (A2).
Anything that starts with U65 would go into the U-65 tab.
1,7 or 8 would go to the lockbox tab.
2 or 5 = IN-HOUSE
3 = WIRES
4 = DATA OCEAN
Eh, WH, or WE = ACH
Finally the variance tab will contain any rows which have a number other than 0 Positive or Negative. My biggest problem is that I never know how many rows the data will have so when I recorded my macro I Started dragging my formats to about row 200. It could one day surpass this number so If I had a choice id set it to row 1,000.
View 5 Replies
View Related
Feb 9, 2014
I remember years ago that I made a couple formulas that on sheet one would transfer to another sheet when I enter in sheet one.
View 5 Replies
View Related
Sep 13, 2012
I need a Macro which pulls the data from different sheets of excel (which is not formatted properly) to Main Sheet. Also some of the columns will not have the same names, so macro should handle this exception as well.
View 8 Replies
View Related
Mar 14, 2014
Right now, it pulls a sheet from another workbook, and saves it to this workbook. It works great. My problem is that I want it to keep what it pulls in, and not change when the other workbook changes. The other workbook has a macro that clears its cells every morning, so new info can be entered.
I want the old info that the code below pulled over to stay the same, so that I can keep a running history of what was entered everyday. At the moment, if I run the clear cells macro in the other workbook, it also clears all in this workbook. What needs changed in the code to make it work right?
SampleEOD.xlsm
View 2 Replies
View Related
Apr 25, 2007
I am trying to write a macro that will select all cells on a sheet from a2 until the last cell with data. (The last column will be column k but not all columns are completly filled. And I need all the data from the page copied.) Then paste that info onto the first sheet. Then go to another sheet do the same thing except paste it in the first open cell on the first sheet.
Then take all the data from the first sheet of different files into one seperate file.
View 9 Replies
View Related
Aug 7, 2013
I have a workbook with 4 sheets one is called final and the other 3 are data1, data2, and data3. The data sheets have the actual data I am needing to pull from. Each has two rows of data: data1 has employee number in column A and employee code in column B. Data2 has employee code in column A and employee name in column B. Data3 has employee name in column A and employee email in column B. Now I need to pull the info form all three sheets into the sheet names final. So the final sheet needs to contain 4 columns for employee number, employee code, employee name, and employee email. The kicker is the data sheets don't line up with each other within each sheet it does but the first one in data1 is not the first in data3 and so on.
View 2 Replies
View Related
Mar 29, 2014
I am creating an excel workbook for my consignment store to keep track of sales for the store as well as the consignors. I have a sheet for each day of the month, and in the sheets I have it to where I can select the consignor from a drop down box. I am trying to create a sheet at the end of the workbook that would allow me to use the drop-down list to select a consignor and have it pull the sales for the month onto that sheet, an end of the month summary of sales. I don't mind creating a formula for each day. IM taking my time on this to make it work the way I want it to. But I cannot figure out how to make it reference that through the drop down box. Consignors name may not be in the same spot each day and might not have sales for that day.
At first I was thinking an IF formula, but how to do an IF for a range of cells from one sheet and have it pull the sales from that same sheet.
View 6 Replies
View Related
Apr 16, 2013
The attached excel file arrivals page and departures page Serial number to compare current on the data up-to-date page, I want to copy.
up-to-date on the "F" column is copied to the page on which you need to print.
View 4 Replies
View Related
Mar 10, 2014
computer just doesn't have the horsepower to run all of the sheets and the formulas and put them together on one sheet in the same workbook.
I was wondering if it would be possible to take the identically arranged sheets from one book and paste the VALUES over to One page in another book.
I'm guessing you'd need to know the directory of the workbook and the title?
Below is the macro i run to compile in to one page in same workbook: (Summary3 is an arbitrary name for the new page, HEADERS is the name of the page that holds the headers for all of the categories, 2014 URL, RAP and DB_Template are the three sheets that I don't want to copy in to this new page)
The headers are in each sheet from B2:DL2 and the data would be from B3:DL75.
I am looking for an update to the following macro that would paste all of the VALUES from each of these sheets in to a new workbook on a single page.
Sub CopyAll()
Dim ws As Worksheet
Sheets.Add.Name = "Summary3"
Sheets("Summary3").rows(1).value = Sheets("Headers").rows(1).value
For Each ws In ActiveWorkbook.Worksheets
ws.Activate
If ws.Name <> "2014 URL" And ws.Name <> "RAP" And ws.Name <> "DB_Template" And ws.Name <> "Summary" Then
Range("B2:DL75").Copy Sheets("Summary3").Range("B" & Rows.count).End(3)(2)
End If
Next ws
End Sub
View 2 Replies
View Related
Dec 11, 2009
I am trying to set up a new workbook for my home accounting, this will consist of a seperate sheet for each item which will store the monthly payment data and a master data input sheet, where i intend to select the month and year from a drop down list, then input the amount in each entry for that month. hopefully i will then be able to hit enter and all data will be sent to its corresponding position in its relevent sheet.
View 6 Replies
View Related
Dec 28, 2011
Call all data in new workbook or in single sheet from different sheets (except 1 or 2 sheet) of workbook. i already use some macro to hide some data from sheets so i want only filtered data.
View 8 Replies
View Related
Feb 1, 2009
I have 2 sheets which validates data using vlookup.
Sheet1
Table 1ABResult1121232313
=VLOOKUP(A7,B:B,1,FALSE) is the formula in result1 column.
Sheet 2
Table 2DEResult21020102040203010#N/A
=VLOOKUP(F7,G:G,1,FALSE) is the formula in result2 column.
The basic idea of these vlookup is to check whether the data present in A or D column is present in B or E. If the data is there then it will be retrieved in "Result1" or "Result2" columns. If not then the result would return the value "#N/A".
What im trying to do is to copy the resultant data(from Result1, Result2) other than "#N/A" from individual sheets to a final consolidated sheet.
View 9 Replies
View Related
Oct 4, 2013
How to pull data based on column B to individual tabs.
I have the following data:
A B C D
Jane Doe | L1 | 20% | High
John Doe | L2 | 15% | Medium
Mike Smith | L1 | 60% | Low
Marie Smith | L4 | 10% | Low
I want to have the first tab/spreadsheet only pull records that have L1 values for column B
In the next tab/spreadsheet I want to pull records that have L2 values in column B etc.
What formula can I write that will pull all L1 records (A.B.C.D) in to Tab 1, then all L2 records (A,B,C,D) into the next tab?
View 10 Replies
View Related
Mar 26, 2014
My excel database has a master sheet where all data is included. It consists of 8 columns with two rows of headers (1st row: Sheet title, 2nd row: Categories for the columns like, name, salary, emp. start date, Boro,emp. number...etc.
Master sheet aside, I have 12 other sheets in the same workbook (Feb-Jan), we run a fiscal year, not calender. The data that is included in the master sheet needs to copy over to the corresponding worksheet sheet month as long as the date in the emp. start date falls with the month range. For example, if my master sheet has data in rows 4,5,7,9,19,23,101...600 and the emp. start date is in the range of from June 1st, 20xx through June 31st, 20xx then all the data in that row should copy over to the next available row in the month of June's worksheet. The same should happen the months of Feb - Jan.
View 9 Replies
View Related
Jun 1, 2009
I've got a bit of a quandary here that my novice programming skills can't seem to solve.
Here is the scenario. I work for a photographic library. We have a spreadsheet that contains 5 or so columns, and a couple of thousand rows. Essentially each row contains an imagine code (the number we use to file away the imagine, ie. US_NY_NYC_1 ) in the first cell, and the image information in the following cells (ie metadata, keywords, photographer, date, etc).
so a typical row would look as follows:
Filename | Keywords | Photographer | Metadata | Location |
all the keyword, photographer, metadata, and location information can only be tied to the one image code whose cell begins the row.
Now, here is my dilemma. This sheet (lets call it the master sheet) contains all the images we have in a given batch. However, when a client orders images, we will send them most images in that batch, but not all, and we may send a few additional. So I have a separate sheet that contains only those image codes that the client requested. What I need to do is essentially take a code from the second sheet, find that same code in the master sheet, and copy over all the cells associated with that code's row. If the number does not exist in the master sheet, simply leave that row with only the code in the first cell, and the rest blank, and move on.
so for example, in my second sheet lets say I have the following A_B_C . I would like for excel to find that same code in the master sheet, and then copy over the metadata, photographer, date, etc, associated with that code, and paste it into the second sheet, so that that row in the second sheet now looks identical to the row with the same image code in the master sheet . If A_B_C does not exist in the master spreadsheet, then I would like excel to simply leave that code in its own row, leave the rest of the row blank, and move on to the next code.
View 12 Replies
View Related
Jul 31, 2013
I have two work books. One is called Ipad and the 2nd is data.
- In Ipad I have 80 pages.
- Cell B20 through I20 is merged (B21:I21, B22:I22 etc through B25:I25)
- There is data in those cells which I assume would be B20 since it highlights the merged block
My question is on Data workbook, I would like to use VBA code and copy all the data from B20 to B25 from each page (1-80) and paste them in Data cell A1.
Is this even remotely possible since the cells are merged? If it would hep to un-merge them my question would remain the same. I would like the data on each page from b20:b25 copied into data Cell A1
View 1 Replies
View Related
