I need to create a graph using the data in the following format:
Item X Y
A: 10 100
B: 20 200
C: 30 300
D: 40 400
E: 50 500
etc.
I need to annotate points with A,B,C etc in the scatter plot so that the same can be quickly identified in the graph.
I would like to make a scatter graph that will graph the attached. The score would be on the Y axis and the birth date would be on the X axis. This is simple to do by itself but what I would like to do in addition to this is to have the top 25% of the scores a single color, the middle 50% of the scores a second color and then the bottom 25% of the scores to be a third color. And if it is possible to have the ID visible when you move your cursor over a given dot in the graph. Currently when I make a scatter graph the X,Y coordinates show when I hoover the cursor over a dot.
How can i make a graph that will graph against time? lets say i have a bank balance like this:
1/2/2000 $500 1/3/2000 $600 3/12/2000 $400
there may be more than one entry on any one given day, or there may not be an entry for 2 weeks. How can i graph the running balance in a way that it will show the timeline just as a calendar year(or however long i selected) and the points are plotting according to their date, not just equally spaced out.
I want to use a line graph to display an amount over time - that's the easy part. On the other hand, I would like to have to group the lines based on a value.
A short example: Imagine you own 3 different stores and you're selling oranges. So your table looks like this: http://img179.imageshack.us/my.php?image=orangeshm4.jpg
Now I'd like to have one graph (3 different graphs won't work as the rows increase -I need to select the whole column as data source):
Date on the x axis, Oranges sold on the y axis, and one line per store (e.g. a green one for store A, a red one for B and a blue one of C, doesn't matter).
I have a X-Y graph with 602 data points. My x scale is a counter from 1 to 602 and the Y is a decreasing set of numbers. When I hover my mouse over the points on the graph (I zoomed the graph) My first 3 points are all labeled as Point "1". At the end of my graph, my last 3 points are labeled 599,601,602, it skips 600.
I am using Excel 2007. Has anybody seen this before?
I am creating a graph with a wide range of values (0.06 - 300). The smaller values are barely visible on my column graph. I have tried all of the tricks I know. Any way to get the smaller values to show up instead of just hovering towards the bottom of the graph?
I need to set up a graph (smooth line chart possibly) with an (x axis) that are not regular intervals. I've attached an example.
the amounts would be (y axis) and the corresponding dates (x axis).
That would be great to start with. Then I have one of these sheets for each month, can there be a continuous graph made using each month or does it need to be individual graphs.
First represet company , second colum represent data1 ( x- axis) and third represet data2 ( y-axis).
I want to plot x-y graph with the company name
Eg. McDon | 10 | 20
In the above case i want to show a round circle or dot which will be 10 right on x axis and 20 up on y axis and near the dot i want to show McDon as company name.
See that attachement... Graph is coming well.. but i am not able to add the company name to the dots.. or pot of x and y intersection
I would like to create a graph where the numbers are grouped in such a way as all numbers between 0 and -1 are shown in one column, all numbers between -1.1 and -2 are shown in the next column, all numbers between -2.1 and 3 are shown in another column etc
I use spectrometer in my reesearch. The datas are in (a, b) format in single cell. Is it possible to seperate a and b seperately? like a in seperate cell and b in seperate cell?
I want to carry out a survey in Sept, Oct and Nov. I will asking 1000 random people in each survey what is their personal favourite--- iPhone, Nexus or Blackberry. Counts of each phone type is then divided into male and female.
Now we have three variables: gender, phone type and month. Is there any way I can present 3 variables on X, Y & Z axes and the value at their intersection as bubble size (or colour gradient)? Theoretically it's possible but I can't find a way to do it in excel. Or anyone knows any software that can get the job done?
My macro prduces some text ang a graph on the screen and I can print the result. Ok so far. But when I run this macro in a different screen resolution, the layout of the page is disturbed: the graph is on the wrong place and the dimensions of the graph are different.
Of course I can drag and resize the graph and include this proces also in the macro but I think this is not the right way. My question is: are in VBA commands which can fix the graph to a location on the sheet/screen and adjust the graph to the requested heighth and width?
Trying to create an N1.85 graph in Excel that has irregular spaced tick marks on the X-axis. Found the following information but no luck with it. Need US measure for this semi-log (10 X N1.85) graph. Also called a semi-expo (Q1.85) graph.
The resulting graph appears to be a log graph in reverse with one scale; the column widths are smaller at the left and become larger as they progress to the right.
Info found:
A 1.85 graph can be constructed manually by establishing a series of 15 values (in the case of the example in D5.2.1) from a base measurement to the exponent of 1.85.
Step 1 Select a base measurement for the desired size of the graph. A base measurement of 1.0 mm will produce a graph to 15 which is approximately 150 mm wide; a base measurement of 1.5 mm will produce a graph approximately 300 mm wide. In the case of a 1 mm base measurement, the x-axis numbers will be the 1-15 series. In the case of a base of 1.5 mm, the numbers will be represented by the series: 1.5, 3.0, 4.5, 6.0 etc. for 15 values.
Step 2 Construct a series of columns to the 1.85 exponent values measured from the zero point. The rows representing the pressure values are linear.
NOTE - A good approximation of the above can be computer-generated by a spreadsheet programme by entering a column width established from the exponential figures by subtracting the preceding value in each case. The column dimensions are displayed in the number of standard characters able to be accommodated in the column width which is slightly inaccurate in linear dimension.
The figures below indicate the values for a graph based on 1.0 mm.
Linear scale Exponential value of linear values = Column width = linear values to 1.85 power exponential value - preceding value
Actual graph will contain a larger/longer X-axis (40 instead of 6 readings), but no more than 2 rows af data (A and B), of which one has a seqenced number af data (row B).
Row B alo has got singular points of data superimposed over the cylinders.
I have got all the numbers ready, but I don't know whether or not it is even possible to create a graph like this.
The cylinders have values up to 45.000 (accumulated in row B), the points (black dots) go from 2 to 6.
If so, I'm having trouble selecting the correct template out of the excel's standard list of graphs.
I have data refering to acceleration of a motorcycle. it uses a calculated value representing acceleration.. each value only relates to the one before and after it, and has no real world value example:
I'm trying to figure a way to calculate numbers in arrears as a part of a sum/average/stdevp.
What I've done so far is create a named range called "x_values" that dynamically adjusts itself to the dates given. What I'm trying to do is create a range that finds the avg of each "X_VALUE", and the previous X_VALUE before it.
I tried =offset(x_values,0,0,roll_factor,1) to do the offsetting; but it just starts at the very top of my range .....
I have a sheet that has names in column A and a list of subjects in Row 1. Cells B2:BA25 have the scores acheived for each person in each subject. I was thinking of creating a customisable graph where by there would be a dropdown box that could select a persons name and this would populate a bar graph of all that persons scores.
I hope you can help me out on a problem I am having. I would like to create a macro that generates a total graph of my sales.
Per product line I have defined a sheet, and I have a defined area per sheet where the sales are recorded. This sheetlayout is the same for every product line and looks like the following:
date name_customer price quantity 1/1/09 Johan 8.00 5 4/1/09 Peter 12.00 9 24/01/09 Carol 29.50 36
In my totals sheet I want to include a line graph, where every line is a product line, on the x-axis the months, and in the y-axis the total per month.
I am using Excel 2007 if that makes a difference.
To complicate things, I use a macro to first empty the sheet and recalculate the totals per product line.
I am getting old and can't remember how to activiate a graph to accept and show new numbers.
Example: In "Charts and Graphs for Microsoft Office 2007" by Bill how does one get the graph (Figure 3.35) to accept data for the coming months and have the data reflected in the Linear Trend Bar (the forecast bar is not in the figure) but I would like to include it?
I'm working on a interfacing program between delphi-excel to manipulate data (from delphi tables) and create a graph in excel. The program is almost done, but I'm having problems with the background and foreground color of the graphs, which don't change.
I have implemented a function in VBA which calculates certain values, called 'IndexSim.' These values are not required to be outputted into the spreadsheet, however I would like to create a simple line graph plot of these values against 1,2,....etc however many values are chosen to be created. The code is as follows:
'Create storage for FTSE100 and binary payoff simulations. Redim IndexSim(1 To SampleSz) As Double Redim Payoff(1 To SampleSz) As Double
'Do the simulations. For Cnt = 1 To SampleSz IndexSim(Cnt) = gBmProcess(Kt, r, q, Vol, TMat - TNow) If IndexSim(Cnt) >= IndexBetValue Then Payoff(Cnt) = Range("D18").Value Else Payoff(Cnt) = Range("D19").Value End If Next Cnt
how I can create a line graph for the 'IndexSim' values, which will update everytime the macro button is clicked.
is it posable to get a graph to popup when the mouse is draded over a certen cell? or maybe to get it to popup in the comments bubble. if that is possible. then is it possible to set pramators that if its above 350 it turns red( on a line graph) and if its below its turns black. this was throwen at my about 20 min ago.