is there a way I can return a column heading(s) if text is present in a row?
refer the attachment...
names are listed down the left, headings along the top, with data in the corresponding cells. For each unique name i.e 'Steven' is there a way to list each heading data is found i.e 'Shop2, Shop4'?
Is there a way I can return a column heading(s) if text is present in a row?
Refer the attachment... ozgrid.xls
Names are listed down the left, headings along the top, with data in the corresponding cells. For each unique name i.e 'Steven' is there a way to list each heading data is found i.e 'Shop2, Shop4'???
I have a formula that I use to tally data and return the number of times a particular value is present in column C.
IF(COUNTIF($C$2:C2,C2)=1,SUMIF(C:C,C2,E:E),"")
I copy this formula down the sheet until arriving at the last input in column "C".
Can someone tell me how to write this in code. All I would like visible in Column "F" is the output not the formula.
ROW 1 - list of headings
ROW 2 - blank cells that may contain an "X"
At the end of Row 2 I want it to find out which is the last column with an "X" in it, i.e. F2, and return the title of that column, i.e. F1.
I have a sheet where a name could appear multiple times in a 22 column data range. I would like to list all the names on a second sheet in Column A and in column B (and further columns as necessary) return the heading name of column where the name is found in cells next to the name.
I think Count If will work for giving me the number of times the name appears in sheet one but is there a way to return the column headings along the same row as the name?
I have an array of data with multiple codes stored in text...
I want to set a formula in a cell to look for all instances of specific text in an array. Then compare the value of all of the column headings, which are numbered across the top of the array, which contain a match in that column and return the highest value.
Example: 10x10 array, columns 1,3, and 5 contain "text" somewhere in those columns. Formula would return 5.
I have a situation where i have headers in a file but just because there is a header does not mean there is any corresponding data in that col.
I was keying off if just the header was present then i need to do "something" but now i need to key off two things:
1) Header present
2) If there is anydata in the col when a header is present.
Question: How to use vba to determine (quickly) if there is any data in a given column.
Simple macro formula. I want to have my function to insert a column and copy over some data headings here is what I have...
Sub Macro17()
'
' Macro17 Macro
'
'
Selection.End(xlToLeft).Select
range("D5").Select
[Code] .........
The issue I am having is that is it inserts the column AA (end of the original data) and I want it to insert at the end of all the data. For example if I run the macro once it posts in column AA, I want the next result to post in AB but it posts in AA.
I have a few row headings on a fresh worksheet (called "New" like so for A1, B1 and C1 for example):
Date Amount Title
I then have raw data on another worksheet. This data has many column headings (more than on the "New" sheet) and the data for that heading in the column underneath heading. So the Date column will have say 50 rows of dates in the column. What I want to do in VBA is match the headings from the "New" worksheet to the raw data worksheet ("Data") and then copy and paste the data into the column under the row heading in "New" from "Data".
with the code for this? I have tried using MATCH and I can't get it to work. I'm also looking for an efficient way to do this I'm sure I am doing it a very inefficient way.
I have a workbook with 2 worksheets, Sheet1 and Sheet2 have the same column headings in Row 1 but they are not in the same positions.
What I need to do is read the column header in Sheet2 Column A (Cell A1) and copy the data from A2 to last row and paste it in Sheet1 in the first empty cell under the same column heading, which may be the Column D position instead of Column A like in Sheet2.
It needs to loop through all the columns in Sheet2, copying the relevant data to under the correct header in Sheet1.
I have a table of data with column headings. I'd like to be able to filter the table based on the column headings, however I have a 'spare row' between the column headings and the data which I use to add new entries to the table using a macro (the macro copies the row and pastes it in one of the empty rows at the bottom of the table, then sorts the data which places it with the rest of the data).
The problem is, Excel won't let me apply a filter to the table if the column headings are separated from the data that I would like filtered.
i need a macro that will copy data based on the column headings, i have two worksheets, the first worksheet is the raw data and second worksheet will be the results sheet, the issue is the headings i have in raw data is different to the headings i have in the results sheet and the heading will not always be in same column in the results sheet, so for example in Raw data i have heading Quantity and in destination sheet i have heading Units, so the macro should copy the data for quantity in sheet raw data and paste to sheet "Results' under heading "Units". The header row on both sheets is row 3. I do have more headers but if I know how to do one then i can apply the same method for the others.
Sheer raw data
Quantity 820,655.00 177,015.00 6,652,041.00 1,517,267.00
Sheet results
Units 820,655.00 177,015.00 6,652,041.00 1,517,267.00
1) I have a Master worksheet that combines/appends data from 5 worksheets. The data in the 5 worksheets is cleared on a daily basis once data has been transferred (using a macro) to the Maser sheet.
2) I use the Match and Index formula for the 5 sheets. Column A "Symbol" being the primary value
Problem:
I have Matching column headings " Date" in 2 worksheets, I can only use date data from one of the sheets that contain the date column data. Here is the formula I use in the master to accept data from the worksheet
=If(Sheet1!C2=0,"",Sheet1!C2)
Sheet1 has the column heading "Date" that is linked to Master Worksheet column Heading "Date". Is there a possible way to re-write the formula where It can accept data from either sheets instead of only 1 sheet?
Going back to the fact that I have 2 date columns in 2 worksheets
Lets say for example;
I have Symbol AAA in Sheet1
I have Symbol ZZZ in Sheet2
I have Symbol GGG in both sheets......................
I have done a VBA course but am struggling to apply it to my situation. What I want to do is on one spreadsheet, I have a column with "shift, date, grade 1, grade 3, quarantine" in it, and in the cells next to it I want an operator to enter either "day" or "night" next to shift, and the date. Next to the others I want the total weight of the appropriate product made in that time. The spreadsheet I will be feeding off is quite big with a lot of information in it. Down the left hand side is the roll number (we make rollstock). Further along on that same row will be the date, the weight, and a grading (putting it into grade 1, 3, quarantine etc). Our shifts run from 7am to 6:59pm, and 7pm to 6:59am. Which shift the roll comes under is determined by it's end time (also in that row). So basically, I need VBA to say sum up all of column [weights] if column [date] = [date cell in working spreadsheet] and if working spreadsheet says day then column [roll end time] =7:00-18:59 and if working spreadsheet says night then column [roll end time] =19:00-6:59 and also if column [grade] = [grade cell in working spreadsheet] ....
Oh, also on the feed spreadsheet i have a column that i put in a little code date, "AP04" for 4th of april kind of thing, rolls being made before 6:59am on the 5th of april being put into the 5th april as they need to be counted under 4th april as they are 4th april night shift (even though the date will stay 5th april)...
Column A consists of cells with a variety of five digit numbers. My formula needs to return a text value if numbers are present in column A, this is what I tried:
=if(A1="","Chassis") but it returns "False" instead of "Chassis".
I have two lists, one that is 99,000 lines and the other is 150. I am trying to find out where the word(s) in the list of 150 is present in the list 99,000.
1st list of 99,000 is in Sheet1 A1-A99000 and the second list is in Sheet2 B1-B150.
The caveat is that in column A there is additional words in that cell so you can not do a simple vlookup, because there may or may not be an exact match.
I have been stuck for hours and the best i can get is to use the match function but it is not working because it is not exact. Last thing i want to do is use the CTRL F key to lookup all the words.
I need a Macro which pulls the data from different sheets of excel (which is not formatted properly) to Main Sheet. Also some of the columns will not have the same names, so macro should handle this exception as well.
View 8 Replies View RelatedThe following code fills down column B for rows 3 to 110, regardless of the inserted "If Not IsEmply' statement. I've got formulas in Column A from row 3 to 110, but visible values in rows 3-5. I want it to fill the for the visible values only.
View 2 Replies View RelatedI have a 2 groups of column headings with a different month and year in each heading so
1st Group of columns range
Columns AJ through AX
Column Heading example "Expense Ratio February 2013......next Column over is "Expense Ratio March 2013"
2nd Group of columns range AY though CE
Column Heading example "Capital Balance February 2013......next Column over is "Capital Balance March 2013"
Each new month I need to add a new Expense Ratio column after the most recent expense ratio Column. (i.e. Find "Expense Ratio March 2013" and I need to add a column after that with heading "Expense Ratio April 2013"
Same thing for Capital Balance - add a new Capital Balance column after the most recent Capital Balance Column. (i.e. Find "Capital Balance March 2013" and I need to add a column after that for "Expense Ratio April 2013"
Because the ranges keep changing month over month, how do i do this.
I have a workbook. Numbers On The Left And Letters At The Top of all sheets cannot be seen. How can I make them visible?
View 2 Replies View RelatedI use a macro to format a debtors ledger. This report shows the amounts that customers owe broken down by the age of the debt, ie Current, 30, 60, 90, 120 days.
To make it easier to read I want macro code that will replace these mostly numeric headings with months ie April, March, February, January, December.
I want to save a worksheet as a CSV but Excel saves the column headings as the first line of the saved csv file. I don't want the column headings in the saved file.
View 3 Replies View RelatedI am looking for a way to ensure that all the leading zeros in one column are present without having to format the column cell be cell. Is this possible?
See the attached excel workbook:
SAMPLE_PivotTable.xlsm
The first five columns of my table contain row titles. I'd like to keep these columns stationary while I scroll horizontally through the remainder of the columns.
As it is now, only the row number remains stationary, but I really don't need the numbers, just the row titles.
Is there any way to do this? And would this also be possible with column headings (so I can scroll down without them moving up)?
I want to put in the column headings "listbox" exactly as it is in the sheet, but non-contiguous columns
View 3 Replies View RelatedI want to place this forumla "=IF(INT(B3/$U$1)=(B3/$U$1),1,0)" across my worksheet.
Now, I'm okay when dragging down as it works fine with the B3 changing to B4 and the U1 staying as U1.
However, I would like it so that when I drag it horizontally, the U1 becomes V1. I want it so that I can do this and it stays within the $. So when dragging sideways it becomes "=IF(INT(B3/$V$1)=(B3/$V$1),1,0)".
if this is possible and if so, how to do it?
All my columns headings are now numbers instead of letters. how do i change them back to letters
View 5 Replies View RelatedI have a spreadsheet which was created some time ago by an unknown person - I have the password for it and have unprotected it. On some of the worksheets the column & row labels are missing.
View 2 Replies View RelatedI am trying to write an advanced sorting macro that sorts on more than 3 columns. I need to poulate a combo box with the column headings, so that I can choose which column to sort on first, second etc. Now I am a complete beginner at this sort of thing, but I believe that ranges are required. I have tried using rowsource properties, but the combo box only ever displays one column heading.
View 2 Replies View Related
