I have Excel XP and som spreadsheets that have external...I want the data is refreshed at the opening and this option Prompt the user Window to refresh data on opening or not.
How or where should I chage this in order this initial message is not showed but the book refresh the querys when opening.
I have a model which extracts data from an external data sournce using an ODBC query. This data is then used to generate a pivot table. I have incorporated code to update the query and the pivot table on startup but would like to disable the Enable Query Refresh message box which occurs at startup (it would also be nice to disable the security warning but I know that is a no no)
View 2 Replies View RelatedI've used the code below and it's worked to stop Update Links message, but i still need one tip to avoid continue message that shows up after Update Links massage:
Private Sub Workbook_Open()
Application.AskToUpdateLinks = False
Sheets("Feb").Activate
Range("A200:I400").Select
Selection.QueryTable.Refresh BackgroundQuery:=True
End Sub
I have a query with ODBC connection to a SQL database. This query's parameter is linked to a cell. The resultant data is the source for a pivot table. I want to refresh the pivot table, when the query is run. I've tried using the cell that triggers the query....but the problem is that the query takes about 10 seconds to run. By the time the query returns new data....the pivot has already refreshed. I need it to refresh AFTER the query is complete.
I tried adding a cell that sums up the data from the query...thinking when THAT changes (due to updated data), to trigger the pivot refresh. Problem is that I don't know the trigger for when the sum cell changes (ie....formula change, not typed in.)
I've got a spreadsheet with a few queries to extract data into my sheet. Whenever I open the spreadsheet, I get a "query refresh" dialog box, asking if I want to "Enable automatic refresh". I keep clicking on the "Enable" button but I have to keep answering the question for each open. Isn't there a way to set "yean - ok - refresh the data" so that I don't have to keep saying "yes"?
View 2 Replies View RelatedCurrently i have a button on sheet 1, that contains this VBA code
Code:
ActiveWorkbook.RefreshAll
Sheets 2 , 3 ,5 all have a MS Queries.
However I only need sheets 2 and 3 refreshed , and not 5.
At the moment it takes long to refresh all , and want to specify which sheets need to be refreshed, to make it faster for the user.
FYG, I cannot remove sheet 5, as it is required on adhoc basis.
I am trying to avoid selecting sheets in my current project. I have a querytable in A1. I can get it to work if i selects sheet and range.
Can it be done using with as below
Code:
With Worksheets("meeting to look at")
End With
I am trying to write a creative procedure that on workbook open will check the name of the worksheet if it includes the day's date in sheetname & if it doesn't rename the sheet & delete current region from A1, else exit the sub.
Then runs a query on an Access DB to place in the above worksheet.
I need this due to novice XL & DB (8)users.
This is what I have at the moment on a test DB courtesy of J Walkenbach's sample files .....
I've used this code prior and it worked fine in Excel 2007, now I'm having issues with it. Originally every Pivottable & Query pointed to a different CSV file. Now I have two pivottables built off a Excel worksheet that is built from a Query. This allows me to do some complex lookups that I couldn't do with just the Pivottable and MS Query alone.
Here's the code that's failing out: Any problems with it in Excel 2007?
Private Sub Update_All_Data_Click()
Dim pvt As PivotTable
Dim ws As Worksheet
Dim qt As QueryTable
mytitle = "This will refresh all data for validation, are you sure?"
Msg = "The Refresh process takes about 5 minutes, are you sure you want to continue?"
Response = MsgBox(Msg, vbExclamation + vbYesNo, mytitle)
Select Case Response
Case Is = vbYes
' Do Nothing, continue with program
Case Is = vbNo
Worksheets("instructions").Range("a1").Select
End
End Select
For Each ws In ThisWorkbook.Worksheets
For Each qt In ws.QueryTables
qt.BackgroundQuery = True
qt.Refresh
Next qt
Next ws
For Each ws In ActiveWorkbook.Worksheets
For Each pvt In ws.PivotTables
pvt.RefreshTable
Next pvt
Next ws
mytitle = "Confirmation of data refresh"
Msg = "The data has been refreshed"
Response = MsgBox(Msg, vbExclamation, mytitle)
End Sub
I have a workbook_open macro that refreshes a query. works great when opened directly from Excel 2007, but when I use Task Scheduler to call the sheet or call Excel the query will not refresh...macro runs but no refresh.
View 4 Replies View RelatedI am bringing data in from an ODBC database, I am using ActiveSheet.QueryTables(1) and then .refresh.
I want to run a sub after the data has been brought in which finds the last row and adds a formula.
The problem I have is that the data brought in is not show on the screen until all of the macros are finished.
Is there a way of forcing the screen to update?, I have tried the recalculate and refreshall commands or is there another method I should be using?
Sub autofill()
Dim myobj As Object
If ActiveSheet.QueryTables.Count > 0 Then
Call clearscreen
Application.DisplayAlerts = False
Set myobj = ActiveSheet.QueryTables(1)
I require the data to be on the screen before I can find the last row used which is done in "addmaths"?
I have the following code that works fine (although i'm sure you'll think it's a little clumsy), but when I add a save workbook line at the end I get a message that says that an action (presumably the save) will interupt a refresh. My problem is that I cant understand why there is a refresh when the code ends. The data that is being refreshing is big and a number of calculations take place, so that may be something to do with it.
Sub RUN()
Application.DisplayAlerts = False
Application.DisplayStatusBar = True[code].....
I have a protected worksheet containing an SQL query. I have two cells on the worksheet unlocked so that users can enter fresh parameters to feed the query.
Because I have to use MS Query to interrogate our SQL server (current IT decree), the query won't support parameters directly when the query cannot be represented graphically - so I have to manually edit the sql command text and then refresh the query - or at least that was why I wrote the code below
The problem: My macro won't unprotect the sheet before it calls the SQL.it therefore won't update the sheet to detail the DSN, command text and number of parameters (latter should be 0) - info just used to verify queryit won't run the query / return the data as the sheet is still protected Comment: I have had to remove sheet protection in order to allow the sql to execute and return data. If protection is removed, the query does execute and return data ( changes in the "parameter" cell contents do cause the query to be correctly modified)
I could comment out the debug info but the query still doesn't return data if the sheet is protected.
Activesheet And worksheets(ndx) where ndx has been defined As ActiveSheet.Name
I apologise If my post Is difficult To follow - especially the code.
Sub AgedStockParameters()
nmb = ActiveWorkbook.Name
ndx = ActiveSheet.Name
Workbooks(nmb).Activate
Worksheets(ndx).Activate
ActiveSheet.Range("A1").Select
WkshtQryCon = Workbooks(nmb).Worksheets(ndx).QueryTables(1).Connection
ActiveCell.Value = WkshtQryCon
Range("A2").Select
WkshtQryFld = Workbooks(nmb).Worksheets(ndx).QueryTables(1).CommandText
ActiveCell.Value = WkshtQryFld.......................
i have an excel spreadsheet with 27 or so workeets. it contains sales figures in it.
I want to be able to link mutiple cells of this workbook to another workbook so that it retreives that data, So that when I hit the refresh (!) button it will automatically put the data in. I will recieve new sales figures (new files) on a monthly basis so i want it to be able to update the figures to the new figures.
I have an MS Access query that contains a parameter. The parameter is a date field, and I have configured that in the Access query. If I run the query within the MS Access user interface, it prompts me for the paramater value as expected, and runs just fine. However, I want to connect to this query from within Excel as a data source.
I have created a connection to the Access file using ODBC from within Excel. In the MS Query window, I am merely selecting all of the fields resident in the MS Access query, and returning all values. In other words, there is no selection criteria in the MS Query. I have done this many times with Access queries that DO NOT contain a parameter, and everything works fine. However, in this instance, I need to pass a parameter through to MS Access in order for the query to run. At the moment, I get the "Too Few Paramaters...1 expected" error message. This makes sense, because I haven't figured out how to pass the paramater to MS Access.
Is there a way to structure this that does not involve VB code? If so, I'd love to know how. I have tried creating parameters in MS-Query with the same name, but although I get the prompt it doesn't connect with the Access query as the source for the parameter value.
If the solution requires using code, I'm good with VB Code in Excel...is there VB for Excel code that could make this happen?
Failing that, I guess there must be (I've seen a few in my search thus far) Access VB Code that can make this work. I'm very rusty using VB with Access, so this is my least favored solution. However, if this is the only option, keep in mind that I need to pass the paramater ultimately from a user who will initiate the process using Excel.
Need the query parameters which takes the date from the cell into the query. How should I modify my query if it needs to take the date from a cell?? The bold one date should be picked from one of the cell in sheet 2.
My query is this
WEB
1
http://fc-web-phl1-101.phl1:8090/gp/...runReport.y=12
Selection=15
Formatting=None
PreFormattedTextToColumns=True
ConsecutiveDelimitersAsOne=True
SingleBlockTextImport=False
DisableDateRecognition=False
DisableRedirections=False
I have a csv file on another drive on the network that i need to query. I believe that ms query would be the best way. I know that a DSN needs to be setup but this macro will be used by various users who wont know how to do that. thus I would like to create one via VBA every time the task needs to be run.
I haven't a clue how to do this and i need it to be explained to me in general terms with words of one syllable!
Will someone please tell me the difference (if there is a difference) between the following 2 lines of ....
View 6 Replies View RelatedI'm trying to query a query in Access 2003, from Excel 2003.
The query in Access looks like:
AccessQuery: [SELECT VBAFunction(field1) FROM Table]
The query in Excel looks like:
ExcelQuery: [SELECT * FROM AccessQuery]
I use the following VBA code in Excel to excecute the query:
With ThisWorkbook.Worksheets(cDataSheetName).QueryTables.Add(Connection:=strConnection, _
Destination:=ThisWorkbook.Worksheets(cDataSheetName).Range("A1"), Sql:=strQuery)
.RowNumbers = True
.Refresh BackgroundQuery:=False
iResultRowCount = .ResultRange.Rows.Count
End With
When I execute this code I get the error message 'SQL Syntax Error' (Error 1004). When I remove the VBA function from the query in Access, it all works fine.
I created an Ms Excel Database Query to bring in data from MS Access. (versions 2002 of MS Excel and Ms Access). The query works fine initially. I can right click, choose Edit Query and change my criteria. Results are returned almost instantly.
My problem is that, once I save the workbook, or autosave happens, I get an error when I right-click to Edit Query: This query cannot be edited by the Query Wizard..
How do you add icons into a message box. ie a warning triangle etc.
View 3 Replies View RelatedIs it possible to set parameters on a query but use a wildcard to return all instances? I have a query that I want to be able to set multiple parameters on but give the user the ability to select as many or as few parameters as they want to see. 2 of the parameters are number fields and 2 are text fields with no spaces.
View 4 Replies View RelatedI can download my data from the web. I can set it to download every so many minutes. But, I have to select run on my vb program to complete calculations and put data in correct format/sheets. I am trying to put a delay/timer in the program so it will refresh on itself and I will not have to keep selecting program run. If I put this in program it appears to refresh in a timely manner however I do not get any data on the sheets ? I have tried the wait routine and the if now = time + routine
View 11 Replies View RelatedI want to refresh a cell by triggering an event using VBA code. I have tried to refresh cell range value using this below code.
View 7 Replies View RelatedThe below is my problem. I have a excel wokbook that contains 2 reports from an outside source and on top of the reports i have some excel calculations.One of report has drill down capability. Everytime i open my excel workbook and refresh it the excel forumals also get refreshed along with my 2 reports and i get my results. But when ever i drill down something on the report the excel formulas are not getting refreshed automatically.
I end up refreshing the whole workbook to get the correct results which is a very time consuming process considering the amount of data i am trying to pull. And drilldown is something the users do very often and they don't like refreshing the whole workbook.
Is there any way to update the excel functions automatically whenever i drilldown?
My macro appears to be refreshing the data from the queries on my supporting worksheets at the wrong time. It apparently doesn't go in the order it appears in my VBA code (and if anyone can explain that I'd love to know what's going on there).
Anyway, all I want to have happen is for all the queries to refresh, and THEN for the rest of my macro to run. So for example, if the user changes the job number in cell A1, or the Date in cell A2, I want the queries to refresh for this new information, and when that is done I want the rest of the macro to run.
I found the following code, but I don't understand enough about VBA to know where exactly it goes. Could someone please walk me through this? I tried putting in Sheet 1 under Microsoft Excel Objects, and I tried putting it in a Module, but neither worked. I'm sure it's some combo of both, but I can't figure it out.
I am trying to create a macro that will sum the total number of 1's 2's 3's 4's 5's '6s in a range of cells d17:100 and return the number of 1s to cell a3 and number of two's to cell a4 and number of 3s to cell a5 and so forth.
I also need this to run each time any changes to any cell on that particular worksheet is made - sort of like 'refresh all the sums' type of thing.
I have been working on this spreadsheet for weeks and can't get past this part!
I have four to five screens being displayed. After 10 hours the screens time out and go into password protection mode.
Is there a way to send a refresh to each of these IE windows to keep them from going into password mode.
They are being watch and security in not the problem. The hours spent logging back into four to five screens are getting really old and time consuming.
I also have MS vb express that I can use but would rather use excel.
I have a large workbook with about 20 worksheets that I have used for several years without problems. Recently, I have been getting strange behavior when the screen refreshes. The biggest problem is that I get images of other worksheets covering my current worksheet when I change a cell. I can make them go away by scrolling or flipping between another worksheet and back. I have tried using manual recalc and this has helped somewhat but I can still get the images sometimes. The workbook contains VBA that performs various tasks on every worksheet (unlock, update pivots...) but these have been in there forever. There is also one piece of code that performs advanced filtering. I can only think there was something changed with a security patch, but I wanted to know if anyone else has had this issue and might be able to provide some advice on how to prevent it.
View 9 Replies View Relatedi have a worksheet and it has 3 Columns ( Date, Amount, Reason), I am trying to create a list box that lists all of the value's under these columns, i have done that successfully by putting the value range in the Properties RowSource area. When i add information to the list, using a Userform i made before, the listbox does not refresh although the excel worksheet does, it only refreshes if i close and rerun the macro. Do i need to change property values, add VB Code to the script.
View 3 Replies View Related